BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4186
Commit 079a58276b ("OvmfPkg/AmdSev/SecretPei: Mark SEV launch secret
area as reserved") marked the launch secret area itself (1 page) as
reserved so the guest OS can use it during the lifetime of the OS.
However, the address and size of the secret area held in the
CONFIDENTIAL_COMPUTING_SECRET_LOCATION struct are declared as STATIC in
OVMF (in AmdSev/SecretDxe); therefore there's no guarantee that it will
not be written over by OS data.
Fix this by allocating the memory for the
CONFIDENTIAL_COMPUTING_SECRET_LOCATION struct with the
EfiACPIReclaimMemory memory type to ensure the guest OS will not reuse
this memory.
Fixes: 079a58276b ("OvmfPkg/AmdSev/SecretPei: Mark SEV launch secret ...")
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
When running under SEV-ES, a page of shared memory is allocated for the
GHCB during the SEC phase at address 0x809000. This page of memory is
eventually passed to the OS as EfiConventionalMemory. When running
SEV-SNP, this page is not PVALIDATE'd in the RMP table, meaning that if
the guest OS tries to access the page, it will think that the host has
voilated the security guarantees and will likely crash.
This patch validates this page immediately after EDK2 switches to using
the GHCB page allocated for the PEI phase.
This was tested by writing a UEFI application that reads to and writes
from one byte of each page of memory and checks to see if a #VC
exception is generated indicating that the page was not validated.
Fixes: 6995a1b79b ("OvmfPkg: Create a GHCB page for use during Sec phase")
Signed-off-by: Adam Dunlap <acdunlap@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4179
TDVF has the feature to do RTMR measurement in SEC phase. In the same time
it builds a GUID hob which carries the hash value of the measurement so
that in DXE phase a td event can be created based on this GUID Hob. There
is a mapping error between TPM PCR index and RTMR index according to UEFI
2.10. That PCR6 is missing in the mapping. This patch fixes this issue.
Cc: Erdem Aktas <erdemaktas@google.com> [ruleof2]
Cc: James Bottomley <jejb@linux.ibm.com> [jejb]
Cc: Jiewen Yao <jiewen.yao@intel.com> [jyao1]
Cc: Tom Lendacky <thomas.lendacky@amd.com> [tlendacky]
Cc: Arti Gupta <ARGU@microsoft.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4179
According to UEFI Spec 2.10 it is supposed to return the mapping from PCR
index to CC MR index:
//
// In the current version, we use the below mapping for TDX:
//
// TPM PCR Index | CC Measurement Register Index | TDX-measurement register
// -----------------------------------------------------------------------
// 0 | 0 | MRTD
// 1, 7 | 1 | RTMR[0]
// 2~6 | 2 | RTMR[1]
// 8~15 | 3 | RTMR[2]
In the current implementation TdMapPcrToMrIndex returns the index of RTMR,
not the MR index.
After fix the spec unconsistent, other related codes are updated
accordingly.
1) The index of event log uses the input MrIndex.
2) MrIndex is decreated by 1 before it is sent for RTMR extending.
Cc: Erdem Aktas <erdemaktas@google.com> [ruleof2]
Cc: James Bottomley <jejb@linux.ibm.com> [jejb]
Cc: Jiewen Yao <jiewen.yao@intel.com> [jyao1]
Cc: Tom Lendacky <thomas.lendacky@amd.com> [tlendacky]
Cc: Arti Gupta <ARGU@microsoft.com>
Reported-by: Arti Gupta <ARGU@microsoft.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4184
According to the Uefi spec 2.10 Section 38.2.2.
EFI_CC_MEASUREMENT_PROTOCOL.GetCapability, the minor version of
StructureVersion and ProtocolVersion should be 0.
Cc: Erdem Aktas <erdemaktas@google.com> [ruleof2]
Cc: James Bottomley <jejb@linux.ibm.com> [jejb]
Cc: Jiewen Yao <jiewen.yao@intel.com> [jyao1]
Cc: Tom Lendacky <thomas.lendacky@amd.com> [tlendacky]
Cc: Arti Gupta <ARGU@microsoft.com>
Reported-by: Arti Gupta <ARGU@microsoft.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update the UnitTestAssertStatusEqual error message to print out the
expected value in addition to the seen value.
Signed-off-by: Jeshua Smith <jeshuas@nvidia.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Remove global variables, store the state in PlatformInfoHob instead.
Probing for fw_cfg happens on first use, at library initialization
time the Hob might not be present yet.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Move the code to a new QemuFwCfgProbe() function. Use direct Io*() calls
instead of indirect QemuFwCfg*() calls to make sure we don't get
recursive calls. Also simplify CC guest detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
This variant does not use global variables.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Use PlatformInfoHob->FeatureControlValue instead.
OnMpServicesAvailable() will find PlatformInfoHob using
GetFirstGuidHob() and pass a pointer to the WriteFeatureControl
callback.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable. Let
BuildPlatformInfoHob() allocate and return PlatformInfoHob instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in S3Verification() and
Q35BoardVerification() functions. Pass a pointer to the PlatformInfoHob
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in NoexecDxeInitialization()
function. Pass a pointer to the PlatformInfoHob instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in MemTypeInfoInitialization()
function. Pass a pointer to the PlatformInfoHob instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in PublishPeiMemory()
and GetPeiMemoryCap() functions. Pass a pointer to the PlatformInfoHob
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in
Q35TsegMbytesInitialization() and
Q35SmramAtDefaultSmbaseInitialization() ) functions.
Pass a pointer to the PlatformInfoHob instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in PeiFvInitialization()
function. Pass a pointer to the PlatformInfoHob instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Stop using the mPlatformInfoHob global variable in AmdSevInitialize()
and AmdSevEsInitialize() functions. Pass a pointer to the
PlatformInfoHob instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
_LPI Revision should be 0 per the ACPI 6.5 specification.
"The revision number of the _LPI object. Current revision is 0."
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Remove HOST_APPLICATION limitation for UnitTestHostBaseLib, so that
this library can be used as BaseLib by Emulator.
Also, add some missing files
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4183
UnitTestPersistenceLib now consumes private struct definition.
Modify APIs in UnitTestPersistenceLib to make it easy to become
a public library.
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For different compilers, both IA32 and X64 can use
Ia32/CpuFlushTlbGcc.c, which is C code (no inline assembly code).
To simplify, remove other assemly file for CpuFlushTlb,
and rename Ia32/CpuFlushTlbGcc.c to X86CpuFlushTlb.c.
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Update Shell Protocol EfiShellGetMapFromDevicePath() to not
set the end if the device path if it is already an end of
entire device path. This removes a write operation that can
cause failures if the Device Path Protocol is mapped to
read-only memory. In general Device Path Protocols should not
be modified unless the API explicitly states that the device
path is modified.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Add a new parser for the Arm Performance Monitoring Unit Table.
The APMT table describes the properties of PMU support
implemented by components in an Arm-based system.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This adds #defines and struct typedefs for the various node types in
the ACPI Arm Performance Monitoring Unit (APMT) table.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
SD1.0 cards don't support CMD8 and CMD6
CMD8 result can be used to distinguish the card is SD1.0 or not.
CMD8 result can be used to decide following CMD6 is sent or skip.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=4016
AtaAtapiPassThru driver was reporting recovery status on failed command
packets which led to incorrect flows in upper layers and to SCT tests
fails. This commit will change the logic to report command status.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Instead of using hard-coded strings ("0.0.0" for BiosVersion etc)
which is mostly useless read the PCDs (PcdFirmwareVendor,
PcdFirmwareVersionString and PcdFirmwareReleaseDateString) and
build the string table dynamuically at runtime.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to the Intel GHCI specification document section 2.4.1, the
goal for instructions that do not have a corresponding TDCALL is for the
handler to treat the instruction as a NOP.
INVD does not have a corresponding TDCALL. This patch makes the #VE
handler treat INVD as a NOP.
Signed-off-by: Ryan Afranji <afranji@google.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The page allocator code in CoreFindFreePagesI() uses a mask derived from
its UINTN Alignment argument to align the descriptor end address of a
MEMORY_MAP entry to the requested alignment, in order to check whether
the descriptor covers enough sufficiently aligned area to satisfy the
request.
However, on 32-bit architectures, 'Alignment' is a 32-bit type, whereas
DescEnd is a 64-bit type, and so the resulting operation performed on
the end address comes down to masking with 0xfffff000 instead of the
intended 0xffffffff_fffff000. Given the -1 at the end of the expression,
the resulting address is 0xffffffff_fffffffff for any descriptor that
ends on a 4G aligned boundary, and this is certainly not what was
intended.
So cast Alignment to UINT64 to ensure that the mask has the right size.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Record Argc, Argv and Envp in EmuThunk Ppi so that other modules
can use these fields to change behavior depends on boot parameters
or environment.
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
EmulatorPkg doesn't need depend on EmbeddedPkg, so remove the dependency.
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The persistent memory is for PEIM to use, and won't lose during cold
or warm reset. PcdPersistentMemorySize is only used by WinHost.c,
other modules can check the persistent memory size using the field
PersistentMemorySize.
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
When build in DEBUG, the code asserts that 5LPage support is there
when the physical address width is larger than 48.
In a RELEASE build it will just force LA57 to 1 in CR4
even if CPUID(7).ECX[16] says it is not supported.
UefiCpuPkg: Bug fix in 5LPage handling
The hang (in the ASSERT) in DEBUG is not warranted as there are
legal configurations with CPUID(7).ECX[16](==LA57)=0
and with a physical address width of larger than 48 (like 52).
This is also supported by this code:
https://github.com/tianocore/edk2/blob/master/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c#L221
There (as long as physical address width is smaller or equal to 52)
any address width above 48 will be reduced to 48 and the
system can and will work without 5LPaging.
The forced setting of LA57 in CR4 (in the absence of LA57 in CPUID(7).ECX)
is a spec violation and should not happen.
Hence the proposed fix
a) removes the assert.
b) only returns TRUE from Is5LevelPagingNeeded if 5LPaging is actually
supported by HW.
Signed-off-by: Robert Guenzel <robert.guenzel@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4173
Due to more core count increasement, it's hard to reflect all APs
state via AP bitvector support in the register. Actually, SMM CPU
driver doesn't need to check each AP state to know all CPUs in SMI
or not, one alternative method is to check the SMM Delayed & Blocked
AP Count number:
APs in SMI + Blocked Count + Disabled Count >= All supported Aps
(code comments explained why can be > All supported Aps)
With above change, the returned value of "SmmRegSmmEnable" &
"SmmRegSmmDelayed" & "SmmRegSmmBlocked" from SmmCpuFeaturesLib
should be the AP count number within the existing CPU package.
For register that return the bitvector state, require
SmmCpuFeaturesGetSmmRegister() returns count number of all bit per
logical processor within the same package.
For register that return the AP count, require
SmmCpuFeaturesGetSmmRegister() returns the register value directly.
v3:
- Refine the coding style
v2:
- Rename "mPackageBspInfo" to "mPackageFirstThreadIndex"
- Clarify the expected value of "SmmRegSmmEnable" & "SmmRegSmmDelayed" &
"SmmRegSmmBlocked" returned from SmmCpuFeaturesLib.
- Thread: https://edk2.groups.io/g/devel/message/96722
v1:
- Thread: https://edk2.groups.io/g/devel/message/96671
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
EmulatorPkg/Win calls LoadLibraryEx() when the corresponding DLL file
is found for each PEIM or DXE driver. The module entry point is
changed to point to the entry point from the DLL. This helps to
notify Visual Studio that a new windows module is loaded and
corresponding symbol parsing is performed for source level debugging.
But entry point from the DLL is only executed when the module is not
loaded by AddModHandle().
When reset happens, we need to clear the DLL loading so that in next
boot the module can be loaded again by AddModHandle().
Without this patch, source level debugging doesn't work after reset.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
The code changes develop UEFI application and dynamic command for
EfiMpServiceProtocol unit tests based on current UnitTestFramework.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
Move the implementation of EfiMpServiceProtocol unit tests in a separate
function in preparation for developing the UEFI application and dynamic
command for the same unit tests.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
With the pending commit of UsbNetworkPkg, it will become common for
UsbBulkTransfer calls to timeout, given that the drivers are called from
MnpSystemPoll every MNP_SYS_POLL_INTERVAL milliseconds: the drivers
check for network packets by calling UsbBulkTransfer with a timeout of
1ms.
Avoid console spam by moving DEBUG messages that occur each time a bulk
transfer request times out from DEBUG_ERROR to DEBUG_VERBOSE, for both
EHCI and XHCI drivers.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Update ReadfishPkg.dec to remove PrivateInclude from the
[Includes.Common.Private] section. The PrivateInclude directory
does not contain any include files, and the PrivateInclude/Crt
include path remaining in the [Includes.Common.Private] section
providing the include path required to access the CRT related
include files by components within the RedfishPkg.
Without this update, there are two forms of #include statements
that can be used to include the CRT related include files.
Include files should only be available using one form of
#include statements.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4164
To support multiple FVs provided by UPL
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
When shutdown is requested, WinHost exits.
Otherwise, WinHost re-runs from SEC.
Tested no extra memory consumption with multiple resets in PEI.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
In EmulatorPkg/Win, SEC and PEI_CORE are loaded to memory allocated
through VirtualAlloc. Though the corresponding DLL files are loaded
and the entry points in DLL files are executed. The loading to memory
allocated through VirtualAlloc is for the case when the DLL files can
not be loaded.
Actually some PEIMs like PcdPeim which are loaded before
"physical" RAM is discovered, they are executing in the original
location (FV) like XIP module in real platform.
The SEC and PEI_CORE can follow the same mechanism.
So, the VirtualAlloc call is removed.
This is to prepare the "reset" support to avoid additional OS memory
consumption when reset happens.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com
Move the "physical" RAM allocation from WinPeiAutoScan
to main() entrypoint.
This is to prepare the changes for "reset" support.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Fix a typo of "RedfishLibs.dsc.inc" in RedfishLibs.dsc.inc, and correct
the name of the .fdf.inc filename in Redfish.fdf.inc.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Nickle Wang <nicklew@nvidia.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Dov Murik
Adam Dunlap
Min M Xu
devel@edk2.groups.io
Gerd Hoffmann
Jeff Brasen
Liu, Zhiguang
Anthony PERARD
Michael D Kinney
Pierre Gondois
Chevron Li (WH)
Albecki, Mateusz
Ryan Afranji
Ard Biesheuvel
Robert Guenzel
Wu, Jiaxin
Ray Ni
Jason Lou
Rebecca Cran
MarsX Lin