Correct some obviously incorrect comments that have invalid details for
the returned values. (Copy /Paste problem?)
There are no functional changes in this commit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change updates PL011UartInitializePort to compare ReceiveFifoDepth
with the correct hardware FIFO size instead of the constant 32 used
previously.
This corrects a minor bug where a request for a fifo size > 15 and < 32
would not have been honoured on a system with a 16 byte FIFO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change corrects 3 problems in the PL011 driver.
1. The TRM states "The UARTLCR_H, UARTIBRD, and UARTFBRD registers must
not be changed:...when the UART is enabled"
2. The TRM (3.3.8) describes logic requiring the UART to be disabled and
flushed before adjusting UARTCR.
3. Several redundant calls get made to PL011UartInitializePort, where
the characteristics do not change, but updating the registers can
cause glitches in the output stream.
The parameters are compared to the current state and no action taken if
no change of state is required.
Where an update is required, the specified logic is followed, and the
register updates only made when the UART is disabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
On some platforms the UART clock is not the same for all the serial
ports. The PL011 driver must be capable of handling serial ports with
different clock rates, so must not rely on a PCD for the clock rate.
This patch allows the UART clock rate to be passed as a parameter
to PL011UartInitializePort(), which is called from the serial port
library. This patch also contains the corresponding changes in the
serial port library.
The PCD in Drivers/PL011Uart is replaced by an extra parameter for
PL011UartInitializePort. The PCD is moved to Library/PL011SerialPortLib
to supply the value to pass.
A corresponding patch to ArmVirtPkg is included in the same bundle to
align that with these changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
The variable LineControl was initialised to zero, then updated in a
condition. This change converts that to a write in each branch of the
condition, removing the Write/Read/Modify/Write sequence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
The PCDs used in the PL011 UART Driver and Serial Port Library are
inherently "fixed at build". This change updates the source to use
Fixed PCDs for these values. This improves clarity and efficiency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
This cosmetic change only tidies things up in preparation for actual
updates. (This reflects responses to a previously submitted patch,
which has been split into several discrete changes.)
There are no functional changes in this commit.
Changes comprise:
Minor corrections to comment typos.
Minor formatting mods.
Expansion of function comments.
Remove OUT from UartBase parameter.
Addition of #define for "magic mumbers".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
pl011 releases earlier than r1p5 has a fifo depth of 16 bytes, whereas
version r1p5 upwards has a fifo depth of 32 bytes. The pl011 driver was
hardwired to 32 byte depth, causing dropped characters on some platforms
(including default settings on FVP Base and Foundation models).
Update driver to select 16 or 32 on port initialization by checking the
component revision.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16656 6f19259b-4bc3-4df7-8a09-765794883524
Rework the PL011UartGetControl() function removing a TODO by the way.
Update of the header comment blocks of (PL011Uart|SerialPort)GetControl() functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16252 6f19259b-4bc3-4df7-8a09-765794883524
Rework of PL011UartSetControl() as a consequence as well as update of
function header comment blocks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16251 6f19259b-4bc3-4df7-8a09-765794883524
The aim of the condition is to check if we should use the default BaudRate
value (case when *BaudRate == 0).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14431 6f19259b-4bc3-4df7-8a09-765794883524
To be compliant with the UEFI specification it is required to update SERIAL_IO_MODE with the values set.
This prototype change allows to get the value used inside SerialPortSetAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14365 6f19259b-4bc3-4df7-8a09-765794883524
Because this driver can be used for different purposes (Terminal, Debug port, communication),
its initialization function has been extended to accept additional settings.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13071 6f19259b-4bc3-4df7-8a09-765794883524
This library makes the interface with the PL011 UART controller.
This library can be linked to different types of driver (Serial Console,
debugger, etc) using PL011 UART controller.
ArmPlatformPkg/PL011SerialPortLib: Use Drivers/PL011Uart
Remove the direct accesses to the PL011 UART controller to use the PL011Uart
library.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11743 6f19259b-4bc3-4df7-8a09-765794883524
Alexei
Evan Lloyd
Leif Lindholm
Ronald Cron
Olivier Martin
oliviermartin