There were several bugs in the vector table relocation code which means
it can't really have been used by anyone on AArch64 in the last decade or
so. So delete the support code from the library, as well as the
ArmRelocateExceptionLib.inf file.
This gets rid of PcdDebuggerExceptionSupport (including a duff reference
in CpuDxe), PcdCpuVectorBaseAddress and PcdRelocateVectorTable.
Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com>
ArmGicArchLib is no longer use so remove all remaining references and
implementations.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Support for GICv2 legacy mode was introduced to accommodate secure world
firmware that was lagging behind in terms of development, and was
running the GIC in v2 mode on the secure side for lack of a GICv3
driver.
As per the GIC architecture, the non-secure world can only run the GIC
in v3 mode if the secure world does so too.
At this point, there is no longer a need to for this fallback: GICv2
support it still needed for platforms such as Raspberry Pi 4 that do not
implement GICv3 at all. But on platforms that do implement it, falling
back to GICv2 is unnecessary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
StandaloneMmCpu driver is only used for Arm architecture and
StandaloneMmCoreEntryPointLib for Arm has specific implementation with
StandaloneMmCpu driver.
Move StandaloneMmCpu Driver and StandaloneMmCoreEntryPointLib for Arm
to ArmPkg.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
StandaloneMm Arm uses stack allocated in data section.
This patch adds Pcd which specify the stack size of StandaloneMm.
Signed-off-by: levi.yun <yeoreum.yun@arm.com>
PcdFfaEnabled is no more used because ArmFfaLib could find whether FF-A
is supported dynamically.
This patch removes usage of PcdFfaEnabled.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
To communicate with spmc or spmd, UEFI needs to map the Rx/Tx buffer
(which is a global resource in a partition)
by getting the required information from the partition descriptor.
for this, Define ArmFfaLib related Pcd and Guid.
Pcd:
- PcdFfaLibConduitSmc
conudit to use ArmFfaLib.
- PcdFfaTxBufeer
address of Tx buffer.
- PcdFfaRxBuffer:
address of Rx buffer.
- PcdTxRxPageCount:
specify buffer size with EFI_PAGE_SIZE unit.
- PcdFfaExitBootEventRegistered:
check exit boot event registered to unmap rx/tx buffer.
Guid:
- gArmFfaRxTxBufferInfoGuid:
This is used in Hob to get Rx/Tx buffer information to pass
Rx/Tx buffer information via HobList if Rx/Tx Buffer mapped in
PEI phase.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
ArmTransferList is used to pass boot information according to
firmware handoff protocol specification [0].
When initializing StandaloneMm, it gets boot information from
the PHIT HOB in the TransferList.
[0] https://github.com/FirmwareHandoff/firmware_handoff
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Feature PCDs and fixed-at-build PCDs are identical in concept, but the
latter are accessible from assembler, whereas the former are not. So
convert the SMCCC conduit selection PCD to fixed-at-build so we can make
use of this in a subsequent patch.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
PcdArmArchTimerFreqInHz lets platforms override the architectural timer
frequency, but this really isn't supported in hardware by anything lower
than EL3. And we no longer support running edk2 at EL3.
So drop this Pcd and update ArmArchTimerLib to unconditionally use
ArmGenericTimerGetTimerFreq () instead.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Related to https://bugzilla.tianocore.org/show_bug.cgi?id=4121, but not
resolving it. (Nearly?) all of ArmPkg describes industry standard
behaviour, and hence according to general rules, ought to live in MdePkg.
Addressing this will however be a substantial task.
Take a first step by moving the ArmLib interface definition to MdePkg,
as discussed in
https://edk2.groups.io/g/devel/topic/patch_v5_2_6/102725178
Continuous-integration-options: PatchCheck.ignore-multi-package
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
This reverts commit 32460bb5b1, which is
no longer needed as ArmVirtQemu now has its own special implementation
for ArmMonitorLib.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ArmVirtQemu may execute at EL2, in which case monitor calls are
generally made using SMC instructions instead of HVC instructions.
Whether or not this is the case can only be decided at runtime, and so
the associated PCD needs to be settable at runtime, if the platform
definition chooses so. This implies a boolean PCD, given that a feature
PCD is build-time configurable only.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Committed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Doug Flick [MSFT] <doug.edk2@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
PcdArmArchTimerHypVirtIntrNum, defaults to 28 as defined in Arm's
Base System Architecture (current version DEN0094C 1.0C).
Relevant for systems implementing FEAT_VHE, added in ARMv8.1.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The DXE core implementation of PcdDxeNxMemoryProtectionPolicy already
contains an assertion that EfiConventionalMemory and EfiBootServicesData
are subjected to the same policy when it comes to the use of NX
permissions. The reason for this is that we may otherwise end up with
unbounded recursion in the page table code, given that allocating a page
table would then involve a permission attribute change, and this could
result in the need for a block entry to be split, which would trigger
the allocation of a page table recursively.
For the same reason, a shortcut exists in ApplyMemoryProtectionPolicy()
where, instead of setting the memory attributes unconditionally, we
compare the NX policies and avoid touching the page tables if they are
the same for the old and the new memory types. Without this shortcut, we
may end up in a situation where, as the CPU arch protocol DXE driver is
ramping up, the same unbounded recursion is triggered, due to the fact
that the NX policy for EfiConventionalMemory has not been applied yet.
To break this cycle, let's remap all EfiConventionalMemory regions
according to the NX policy for EfiBootServicesData before exposing the
CPU arch protocol to the DXE core and other drivers. This ensures that
creating EfiBootServicesData allocations does not result in memory
attribute changes, and therefore no recursion.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The UEFI Shell is a non-active boot option, at the opposite of UiApp.
If no valid boot option is found, UiApp is selected. UiApp requires a
human interaction. When installing a new EDKII image in CIs or when
scripting is required, this is problematic.
If no valid boot option is discovered, add a path to directly go to
the UEFI Shell where the startup.nsh script is automatically executed.
The UEFI Shell is launched after connecting possible devices, but
before the reset that is meant to automatically make them visible.
The new PcdUefiShellDefaultBootEnable must be set to TRUE to enable
this behaviour. The Pcd is set to false by default.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Patrik Berglund <patrik.berglund@arm.com>
The ArmMonitorLib provides an abstract interface to issue
an HyperVisor Call (HVC) or System Monitor Call (SMC) depending
on the default conduit.
The PcdMonitorConduitHvc PCD allows to select the default conduit.
The new library relies on the ArmHvcLib and ArmSmcLib libraries.
A Null instance of these libraries can be used for the unused conduit.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Define a PCD 'PcdMonitorConduitHvc' to select the conduit to use for
monitor calls. PcdMonitorConduitHvc is defined as FALSE by default,
meaning the SMC conduit is enabled as default.
Adding PcdMonitorConduitHvc allows selection of HVC conduit to be used
by virtual firmware implementations.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
In order to reduce the likelihood that we will need to rely on the logic
that disables and re-enables the MMU for updating a page table entry
safely, expose the XIP version of the helper routine via a HOB and use
it instead of the one that is copied into DRAM. Since the XIP copy is
already clean to the PoC, and will never end up getting unmapped during
a block entry split, we can use it safely without any cache maintenance,
and without running the risk of pulling the rug from under our feet when
updating an entry by going through an invalid mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
LinuxBoot is a firmware that replaces specific firmware functionality
like the UEFI DXE phase with a Linux kernel and runtime. It is built-in
UEFI image like an application, which is executed at the end of DXE
phase.
To achieve the LinuxBoot boot flow "SEC->PEI->DXE->BDS->LinuxBoot",
today we use the common well-known GUID of UEFI Shell for LinuxBoot
payload, so LinuxBoot developers can effortlessly find the UEFI Shell
Application and replace it with the LinuxBoot payload without
recompiling platform EDK2 (There might be an issue with a few systems
that don't have a UEFI Shell). Also, we have a hard requirement to force
the BDS to boot into the LinuxBoot as it is essentially required that
only the LinuxBoot boot option is permissible and UEFI is an
intermediate bootstrap phase. Considering all the above, it is
reasonable to just have a new GUID for LinuxBoot and require a LinuxBoot
specific BDS implementation. In addition, with making the BDS
implementation simpler, we can reduce many DXE drivers which we think it
is not necessary for LinuxBoot booting.
This patch adds a new PlatformBootManagerLib implementation which
registers only the gArmTokenSpaceGuid.PcdLinuxBootFileGuid for LinuxBoot
payload as an active boot option. It allows BDS to jump to the LinuxBoot
quickly by skipping the UiApp and UEFI Shell.
The PlatformBootManagerLib library derived from
ArmPkg/Library/PlatformBootManagerLib.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Moritz Fischer <moritzf@google.com>
Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs. Also use
PcdPciMmio32Translation and PcdPciMmio64Translation
PCDs provided by MdePkg instead of ArmPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
PcdPciIoTranslation PCD is relocated to MdePkg and leveraged by
both ARM and RISC-V arch. This patch removes the one from ArmPkg
and address the corresponding changes required for other modules
under ArmVirtPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Changes in ArmPkg to prepare building StandaloneMm firmware for
32bit Arm architectures.
Adds ArmmmuStandaloneMmLib library to the list of the standard
components build for ArmPkg on when ARM architectures.
Changes path of source file AArch64/ArmMmuStandaloneMmLib.c
and compile it for both 32bit and 64bit architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch documents the libraries advertised in ArmPkg.dec.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some library headers are missing/incorrect in ArmPkg.dec.
This makes the 'LibraryClassCheck' CI test fail. This patch
adds/corrects them.
According to .pytool/Readme about the 'LibraryClassCheck' test:
This test scans at all library header files found in the
`Library` folders in all of the package's declared include
directories and ensures that all files have a matching
LibraryClass declaration in the DEC file for the package.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=3254
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=3258
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Secure Partition(SP) can request services from the Secure
Partition Manager Core(SPMC) either through FF-A calls or through the
existing SVC calls. Add a feature flag Pcd for enabling the FF-A
method -- when this is set to FALSE, the SP uses the existing SVC
calls for making the requests.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Platforms are expected to override these PCDs to provide relevant
information to SMBIOS.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib. Note that this means the hack to support warm
reboot by jumping to the SEC entry point with the MMU and caches off
is also no longer used, and can be removed as well, along with the PCD
PcdArmReenterPeiForCapsuleWarmReboot that was introduced for this
purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This is initial version of OP-TEE library that provides api's to
communicate with OP-TEE OS (Trusted OS based on ARM TrustZone) via
secure monitor calls. Currently it provides basic api to detect OP-TEE
presence via UID matching.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
With the last user FdtPlatformDxe removed, we can finally get rid of the
last bit of ARM BDS related cruft.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that ArmDmaLib can take care of its own memory allocation needs,
let's get rid of UncachedMemoryAllocationLib entirely. This forces
platforms to declare the required semantics (non-cache coherent DMA,
whichever way it is implemented), rather than using uncached memory
allocations directly, which may not always be the right choice, and
prevents sharing of drivers between platforms if one is cache coherent
and the other is not.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This removes the PCD PcdArmUncachedMemoryMask from ArmPkg, along with
any remaining references to it in various platform .DSC files. It is
no longer used now that we removed the virtual uncached pages protocol
and the associated DebugUncachedMemoryAllocationLib library instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Virtual uncached pages are simply pages that are aliased using mismatched
attributes, which is not allowed by the ARM architecture. So remove the
protocol and its implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PcdGenericWatchdogControlBase & PcdGenericWatchdogRefreshBase
are declared as UINT32 values in ArmPkg.dec, but for platforms
with addresses in the memory range above 4GB this causes build
error F000: Too large PCD value for datum type [UINT32]
of PCD gArmTokenSpaceGuid.PcdGenericWatchdogControlBase
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=361
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some devices, such as the Raspberry Pi3, have a fixed offset between memory
addresses as seen by the host and as seen by the other bus masters. So add
a new PCD that allows this fixed offset to be recorded, and to be used when
returning device addresses from the DmaLib mapping routines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ard Biesheuvel
Leif Lindholm
Levi Yun
Leif Lindholm
Pierre Gondois
Sami Mujawar
Nhi Pham
Abner Chang
Etienne Carriere
Sughosh Ganu
Rebecca Cran
Ard Biesheuvel
Michael D Kinney
Jeff Brasen
Leif Lindholm
Achin Gupta
Sumit Garg
Girish Pathak
Laszlo Ersek
Supreeth Venkatesh
Alexei