Currently, the EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute is completely
ignored by the PCI host bridge driver, which means that, on an implementation
that supports DMA above 4 GB, allocations above 4 GB may be provided to
devices that have not expressed support for it.
So in addition to checking 'RootBridge->DmaAbove4G' to establish whether the
root bridge itself supports DMA above 4 GB, we must also take into account
the operation type (EfiPciOperationBusMaster{Read|Write|CommonBuffer}64),
and the EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute, when mapping and
allocating DMA memory, respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The IP address should not be treated as classful one if DHCP options
contain a classless IP with its true subnet mask. Otherwise, DHCPv4
TransmitReceive() will failed. This real subnet mask will be parsed
and recorded in DhcpSb->Netmask. So, we need check it before get the
IP's corresponding subnet mask.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Since current codes in NvmExpressDxe already support the non-blocking I/O
feature for EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface, the relative bit
in the 'Attributes' field of EFI_NVM_EXPRESS_PASS_THRU_MODE should be set
to reflect this.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This commit fixes the issue that the caller event passed to
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.PassThru() will not be signaled for
NVME Admin commands.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec, EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.PassThru()
should return EFI_INVALID_PARAMETER if the input 'NamespaceId' is invalid
for the NVM Express controller. This commit adds check in PassThru() to
follow this rule.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This commit adds serveral checks for the 'Packet' parameter passed to the
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.PassThru() API:
The check for the 'TransferLength' field in
EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET to make sure the value will not
exceed the maximum data transfer size allowed by a controller.
The check for the 'TransferBuffer' and 'TransferLength' fields in
EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET when the Opcode of an NVME
command indicates a data transfer between controller and host.
The check for the 'MetadataLength' field in
EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET to make sure the value is not 0
when the corresponding 'MetadataBuffer' field has a non-NULL value.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to UEFI spec, an EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL with neither
EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL nor
EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL set in the Attributes field
is an illegal configuration.
This commit adds this check in the PassThru API to follow the spec.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec, the 'TransferBuffer' and 'MetadataBuffer' used
in a data transfer should be aligned on the boundary specified by the
IoAlign field in the EFI_NVM_EXPRESS_PASS_THRU_MODE structure.
This commit adds this check to follow the spec.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec,
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNextNamespace() should return
EFI_NOT_FOUND when the value pointed to by NamespaceId is the namespace ID
of the last namespace on the NVM Express controller. This commit modifies
the check for NamespaceId to follow this rule.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec,
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNamespace() should return
EFI_NOT_FOUND when the input DevicePath is a device path node type that
the NVM Express Pass Thru driver supports, but there is not a valid
translation from DevicePath to a namespace ID. Current code will return
EFI_SUCCESS. This commit adds additional check in the GetNameSpace API to
make sure correct status is returned.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec,
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath() should return
EFI_NOT_FOUND when the input NamespaceId is not valid. However, current
code returns EFI_DEVICE_ERROR instead. This commit modifies the check for
input NamespaceId to return the correct status.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The gBS->OpenProtocol() calls to open EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL
in NvmExpress.c will crash the data in 'Mode' field of
'Private->Passthru'.
The third parameter of gBS->OpenProtocol() is an output parameter that
stores the address where a pointer to the corresponding Protocol
Interface. The current code mistakenly pass '&Private->Passthru' (a
pointer of the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL) as the third
parameter. This will crash the data in 'Mode' filed.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Support multiple PCI segment for PCI_CONFIG2 opcodes.
PiDxeS3BootScriptLib needs to be updated to consume PciSegmentLib
instead of PciLib. That means platforms need to add PciSegmentLib
declaration like below in platform dsc if the PciSegmentLib was
not declared in platform dsc before.
PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
For platforms only have one segment,
MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf is recommended
to be used and declared in platform dsc for PiDxeS3BootScriptLib to have
equivalent functionality with before.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
BootManagerMenu boot option is handled by EfiBootManagerGetBootManagerMenu.
Don't need to handle it again when parse LoadFile protocol.
In V2, use "BootManagerMenu" instead of "BootMenuApp".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Rename local function name BootMenuApp to BootManagerMenu to align to
other public function name.
In V2, use "BootManagerMenu" instead of "BootMenuApp".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The prototypes of EbcInterpret() and ExecuteEbcImageEntryPoint() are
private to the AARCH64 implementation of EbcDxe, so we can shuffle
the arguments around a bit and make the assembler thunking glue a lot
simpler.
For ExecuteEbcImageEntryPoint(), this involves passing the EntryPoint
argument as the third parameter, rather than the first, which allows
us to do a tail call. For EbcInterpret(), instead of copying each
argument beyond #8 from one native stack frame to the next (before
another copy is made into the VM stack), pass a pointer to the
argument stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Instead of pessimistically copying at least 64 bytes from the VM stack
to the native stack, and popping off the register arguments again
before doing the native call, try to avoid touching the stack completely
if the VM stack frame is <= 64 bytes. Also, if the stack frame does exceed
64 bytes, there is no need to copy the first 64 bytes, since we are passing
those in registers anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The thunk generation is needlessly complex, given that it attempts to
deal with variable length instructions, which don't exist on AArch64.
So replace it with a simple template coded in assembler, with a matching
struct definition in C. That way, we can create and manipulate the thunks
easily without looping over the instructions looking for 'magic' numbers.
Also, use x16 rather than x9, since it is the architectural register to
use for thunks/veneers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Change to consistent // style comments. Also, remove bogus global
definitions for external functions, and move the real exports to
the top of the file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
UEFI spec:
Each load option entry resides in a Boot####, Driver####, SysPrep####,
OsRecovery#### or PlatformRecovery#### variable where #### is replaced
by a unique option number in printable hexadecimal representation using
the digits 0-9, and the upper case versions of the characters A-F
(0000-FFFF).
The patch also makes L"HwErrRec####" follow this rule.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
If a FQDN contains 3 dots '.' like "a.b.c.com", the AsciiStrToIp4
will return success as the HostName has a valid IP address. So we
need to check if it is a decimal character before using AsciiStrDecimalToUintn.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
We have added a new policy to get default value for question:
get default from other default id if current default is not specified.
But when getting default value for checkbox, if the default
flag is not set, it will set the default value to FALSE for checkbox.
This behavior in checkbox conflicts with the new added policy,
so now we move this behavior to the end of getting default form other
default id.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
IpSb->Reconfig should not be set to TRUE to focal the reconfiguration
during the policy changes from Static to DHCP. It's redundancy because
the default router table and default addresses have been freed ahead (
Detailed see Ip4Config2OnPolicyChanged() function). Otherwise, the
potential failure will appear if UseDefaultAddress configured. Reproduce
steps see below:
#1. Set policy to DHCP.
#2. If DHCP process is not complete yet, then run one APP to invoke UDP4
Configure with "UseDefaultAddress = TRUE" (loop to call UDP4 Configure
until Ip4Mode.IsConfigured changes to TRUE).
#3. Even DHCP succeed but Ip4Mode.IsConfigured flag never set to TRUE
Concrete analysis is as follows:
In #1, the policy will be set to DHCP, and then Ip4Config2OnPolicyChanged()
will be called. In this function, if "IpSb->Reconfig" flag is set to TRUE,
the original "IpSb->DefaultInterface" will be abandoned/freed once the
DHCP process finished.
In #2, UDP4 Configure with "UseDefaultAddress = TRUE" is called, that means
the default interface (IpSb->DefaultInterface) will be selected as current
instance's interface.
In #3, when DHCP process finished, the original DefaultInterface will be
abandoned/freed because "IpSb->Reconfig" flag is true. Meanwhile, one new
interface is assigned to "IpSb->DefaultInterface". This new interface is
different to the original one assigned to the UDP4 Configured instance. So,
even DHCP process succeed, the up caller will never have the chance to get
it's truly status.
Cc: Cohen Eugene <eugene@hp.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch is to enhance SetupBrowser to handle following two cases:
1. When searching BlockName in AltResp, the hex digits of related BlockName
in AltResp may be in uppercase.
2. When converting the Value in AltResp to HiiValue, the length of value
string is bigger than the length of StorageWidth of the question.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When comparing the L"OFFSET=" with the ConfigResp string to find
all the "OFFSET=" in ConfigResp, should skip the character "&"
before "OFFSET=" in ConfigResp string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in SetupBrowser.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in HiiDatabase.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
The retry mechanism will bring issue if the usb device is unplugged
from XHCI HC but s/w is trying to access it through BlockIo. The
current cmd will get device error return status, but the sequential
cmds will be timeout. This behavior will cause system unresponsive
for a long while and bring bad user experience.
So we break the retry loop if found device error.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
The original code will assert when dealing with those empty FVs.
The fix is used to solve this bug.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Ard Biesheuvel
Jiaxin Wu
Hao Wu
Star Zeng
Liming Gao
Ruiyu Ni
Jeff Brasen
Zhang Lubo
Marvin Haeuser
Dandan Bi
Feng Tian