When the type of HiiValue is BUFFER Type, the BufferValue
of the related question can not be NULL, so can remove the
check.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The patch uses CoreAcquireLockOrFail() instead of
CoreAcquireProtocolLock() in CoreLocateProtocol() to avoid
assertion when CoreLocateProtocol() is called with the
protocol database locked.
The issue was found when changing PcdDebugPrintErrorLevel to
enable page/pool allocation debug message.
Nt32 platform hangs immediately after DxeCore is loaded.
Investigation shows the following calling stacks:
DxeCore entry point (Install a certain protocol)
0 DxeCore::CoreInstallProtocolInterface // Protocol DB is locked
1 DxeCore::AllocatePool
2 PeiDxeDebugLibReportStatusCode::DebugPrint
3 DxeReportStatusCodeLib::ReportStatusCodeEx // <-------------------|
4 DxeReportStatusCodeLib::InternalGetReportStatusCode |
5 DxeCore::LocateProtocol(StatusCodeRuntimeProtocol) |
// Assertion when locking Protocol DB 2nd time |
6 DxeCore::CoreAcquireProtocolLock |
7 PeiDxeDebugLibReportStatusCode::DebugAssert |
8 DxeReportStatusCodeLib::ReportSatusCodeEx // loop begins ---------
In frame #6 the assertion is triggered due to the protocol database
is already locked. #8 calls #4 and the loop begins.
After changing #6 to CoreAcquireLockOrFail(), the assertion is
avoided and the loop is broken.
With the fix, NT32 can boot to Shell even setting
PcdDebugPrintErrorLevel to 0xFFFFFFFF, with all error levels turned
on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This library instance is PEIM type, not BASE type. It has the PPI
dependency for PEIM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Current MemoryAttributesTable will be installed on ReadyToBoot event
at TPL_NOTIFY level, it maybe incorrect when PcdHiiOsRuntimeSupport
= TRUE as HiiDatabaseDxe will have runtime memory allocation for HII
OS runtime support on and after ReadyToBoot. The issue was exposed at
http://article.gmane.org/gmane.comp.bios.edk2.devel/10125.
To make sure the correctness of MemoryAttributesTable, this patch is
to enhance MemoryAttributesTable installation to install
MemoryAttributesTable on ReadyToBoot event at TPL_CALLBACK - 1 level
to make sure it is at the last of ReadyToBoot event, and also hook
runtime memory allocation after ReadyToBoot.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The following patch for MemoryAttributesTable will need the memory type.
And CoreUpdateProfile() can also use the memory type for check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Originally, the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" was after ProcessLibraryConstructorList(). To fix an issue,
ProcessLibraryConstructorList() was moved to be right after CoreInitializeGcdServices()
at c5d5379937, but the code block was left.
As there maybe PeCoffExtraActionLib implementation need Constructor executed first,
the patch is to move the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" to be after ProcessLibraryConstructorList.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to SD Host Controller 3.0 spec figure 3-10, we have to wait
1ms before checking DAT[3:0] in voltage switch proc
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The original code doesn't reset the slot when there is device change.
It may bring issue on device identification procedure of some SD cards.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
If there is no card presented before power on, there would
have no card change interrupt generated. This is a corner
case which can't be handled by old logic.
The patch is used to move card present detection in the front
of card change interrupt detection.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The bcdUSB value of usb3.1 is 0x0310, we update the condition judgment
to get correct max packet size for usb3.1 dev.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The GetKeyDescriptor() may return NULL when the KeyData is invalid.
For such case, we should go to error handling path rather than assert
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Allow EfiVarStore to get <AltResp> from Hii Driver, and enhance code logic
in MergeDefaultString function to get a full AltCfgResp.
The logic in function MergeDefaultString after enhancement:
(1) If there are no <AltResp> in AltCfgResp, merge the <AltResp> in
DefaultAltCfgResp to AltCfgResp.
(2) If there are <AltResp> in AltCfgResp, for the same <AltConfigHdr>, if
the <ConfigElement> already in AltCfgResp, don't need to merge from
DefaultAltCfgResp, else merge the <ConfigElement> in the DefaultAltCfgResp
to the related <AltResp> in AltCfgResp.
AltCfgResp: Generated by Driver.
DefaultAltCfgResp: Generated by HiiDatabase.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the sample case for orderedlist to get standard
default value from Callback function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For orderedlist question, the value is stored in a buffer,
not in HiiValue. So when need to get default value from callback
function for orderedlist, need to pass the buffer.
This patch is to enhance this logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Set the Force Unit Access (FUA) bit in NVMe Write - Command Dword 12 to
ensure write-through behavior.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Change to use a different FILE_GUID to avoid using the
same GUID as the module in IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Change to use a different FILE_GUID to avoid using the
same GUID as the module in IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Count is initially 1 but is assigned to 2 in case PS2_READ_DATA_BYTE.
Though the state machine doesn't go back from PS2_READ_DATA_BYTE to
PS2_READ_BYTE_ONE (not a true bug), force assign Count to 1 to avoid
potential buffer overflow issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
In PerformanceLib, Identifier is for single PERF, not the pair of PERF.
When find the matched START and END pair, the identifier will not be checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
gEfiPs2PolicyProtocolGuid and PcdFastPS2Detection was missed when
resolving the conflict.
Check in the two definition to MdeModulePkg.dec to fix build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add 2 macros inNetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number.
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Redfine the BmIsValidLoadOptionVariableName function to allow public use. Change name to EfiBootManagerIsValidLoadOptionVariableName to match naming scheme. Check that VariableName is never NULL and allow OptionType and OptionNumber to be optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The S3Ready() functional code in AcpiS3SaveDxe of IntelFrameworkModulePkg
is to do ACPI S3 Context save. In fact, that is not really related to
Intel framework ACPI S3 protocol.
IntelFrameworkModulePkg will be deprecated step by step, so move the
functional code to MdeModulePkg and S3SaveStateDxe is a good place.
The ACPI global variable related code is leaved as is in IntelFrameworkModulePkg
AcpiS3SaveDxe for compatibility.
PcdS3BootScriptStackSize is also moved from IntelFrameworkModulePkg.
The functional code need to get ACPI FACS table and consume LockBoxLib,
so need to be before DxeSmmReadyToLock that will shut down SMM lock box
interface, EndOfDxe is a good point (OVMF AcpiS3SaveDxe has the reference
implementation).
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Platform can configure the PCD statically or dynamically
to control if ACPI S3 will be enabled.
S3 related modules can consume the PCD to control the code.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
MemoryTypeInformation don't count the reserved memory used by RAM Disk,
but it still check all types of memory and do reset when any type
of memory size changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
The resource free includes to un-register the ram disk device and
free the memory occupied by the ram disk.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Use reserved memory to hold the buffer for the RAM disk to
follow the ACPI spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This change mirrors the change in InteFrameworkModulePkg.
We now account for all TYPE19 memory regions found in the
smbios data, as well as handling records with Extended Addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit 1b31acb66c ("MdeModulePkg: Check received packet size before use
it.") introduced a chunk of code under the new "Resume" label, in function
UdpIoOnDgramRcvdDpc(). The new code is supposed to run only when the
received packet has zero-length payload, but a "return" statement was
forgotten, and the code is reached on the normal (nonzero-length payload)
path as well, after the packet has been processed (and possibly freed) by
RxToken->CallBack(). This is a logic bug, with the direct symptom being
use-after-free / General Protection Fault.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: "Subramanian, Sriram (EG Servers Platform SW)" <sriram-s@hpe.com>
Fixes: 1b31acb66c
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Arbitrary length of packet may be received from network, including the
packets with zero payload data or malformed protocol header. So the code
much check the actually received data size before using it. For example, in
current edk2 network stack, an zero payload UDP packet may cause the
platform ASSERT in NetbufFromExt() because of the zero fragment number.
This patch update the IpIoLib and UdpIoLib to check and discard the zero
payload data packet to avoid above assert. Some other network drivers are
also updated to check the packet size to guarantee the minimum length of
protocol header is received from upper layer driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This reverts commit 31ae446b1a.
Changing the receive FIFO depth in Terminal driver Start() is not
recommended.
A new PCD PcdUartDefaultReceiveFifoDepth was added and
MdeModulePkg/SerialDxe driver uses the PCD as the default receive
FIFO depth.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
EndingAddress is calculated incorrectly. Original code calculates it as
(StartingAddress + Size). Correct value should be (StartingAddress +
Size - 1.
Note:
Besides the changes made by Samer, Hao also fixed a similar issue in
RamDiskImpl.c
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Check for NULL from AllocateCopyPool before setting Count to 1. Also
change sizeof (EFI_HANDLE*) to sizeof (EFI_HANDLE). Handles is a
EFI_HANDLE pointer, so the allocated memory must be the size of
EFI_HANDLE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This stack includes:
1. Dxe phase support by:
1) SdMmcPciHcDxe driver to consume PciIo and produce
SdMmcPassThru.
2) SdDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2.
3) EmmcDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2/SSP.
2. Pei phase support
1) SdBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
2) EmmcBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
3) SdMmcPciHcPei driver to produce SdMmcHostController
Ppi.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
There are scenario when the BindingStop service of PartitionDxe driver be
re-entered.
An example will be ejecting a DVD from a SATA DVDROM and then run
"reconnect -r" under shell. In this specific case, part of the calling
stack will be:
PartitionDriverBindingStop() (PartitionDxe) ->
Stop first child handle (PartitionDxe) ->
ScsiDiskFlushBlocksEx() (ScsiDiskDxe) ->
A media change is detected (ScsiDiskDxe) ->
Reinstall of BlockIO(2) protocols (ScsiDiskDxe) ->
Entering PartitionDriverBindingStop() again (PartitionDxe) ->
Potential risk of referencing already stopped child handle (PartitionDxe)
...
The current code has potential issue of referencing of already stopped
child handle. This commit adds re-entry handling logic to resolve such
issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Set UART receive FIFO depth with PCD instead of fixed number "1".
The default value of PCD is also 1, so it makes no difference for
platforms which do not explicitly set this PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Found an issue that file system cannot be started on a DVD when doing the
following process:
Boot to shell with a DVD inside a SATA DVDROM. Eject the DVD and run
"reconnect -r". Put the DVD inside again and run "reconnect -r".
The cause is that after executing the second reconnect action, DiskIo
immediately returns EFI_NO_MEDIA in function DiskIo2ReadWriteDisk() when
checking the media information. However, at this time, the media
information does not get updated by the ScsiDisk driver. Therefore, DiskIo
driver should left the no media check to ScsiDisk driver.
Generally, the media changed and media write protect check should also be
left to lower-level device driver. Thus, these two checks in function
DiskIo2ReadWriteDisk() are also removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some ISO images cannot be recognized properly when they are on media whose
block size is not 2048 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The 'Reset' function for BlockIO(2) in ScsiDiskDxe should return
EFI_SUCCESS instead of EFI_DEVICE_ERROR when a device does not support
reset feature.
Otherwise, a 'reconnect -r' action when an ISCSI device is attached will
cause system hang.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Remove variables that are declared, assigned but never referenced. This
fixes a warning emitted by GCC when -Wunused-but-set-variable is in effect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
When there is no bridge before the HPC (hot plug controller),
the issue cannot be seen.
But when there are bridges before the HPC, the PciBus will only
use the value (= <CurrentBusNumber> + <ReservedBusNumber>) as the
sub-ordinary bus number for HPC.
The correct sub-ordinary bus number should be:
<CurrentBusNumber> + <OccupiedBusNumber>(by earlier bridges) +
<ReservedBusNumber>.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Xcode clang seems unhappy with both FileExplorerLib.h and
Protocol/FileExplorer.h both defining CHOOSE_HANDLER, now
remove the definition in FileExplorerLib.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The type casting is not necessary and now remove it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
The BootMaintenanceManagerUiLib use ChooseFile() from FileExplorerLib
to select files. And the third parameter in ChooseFile() is CHOOSE_HANDLER,
per the definition of CHOOSE_HANDLER, it must use EFIAPI as the calling
convention. But the calling convention was not specified for following
handlers: CreateBootOptionFromFile, CreateDriverOptionFromFile,
BootFromFile. Now specifies the calling convention for those functions.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
There is no asynchronous operations to the registered RAM disks link list
maintained within RamDiskDxe driver, therefore, the TPL raise and restore
operations when dealing with the link list are unnecessary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Previously, the code uninstalls the DEVICE_PATH_PROTOCOL with the device
path given by caller of the 'RamDiskUnregister' function. The given device
path might be different from the one used to install the
DEVICE_PATH_PROTOCOL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The 'DisconnectController' function calls after
'UninstallMultipleProtocolInterfaces' are unnecessary, since
'DisconnectController' is called inside function
'UninstallMultipleProtocolInterfaces'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Check for Type AllocateAddress,
if NumberOfPages is 0 or
if (NumberOfPages << EFI_PAGE_SHIFT) is above MAX_ADDRESS or
if (Start + NumberOfBytes) rolls over 0 or
if Start is above MAX_ADDRESS or
if End is above MAX_ADDRESS,
return EFI_NOT_FOUND.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Do not locate VarCheck protocol in Constructor, then the
gEdkiiVarCheckProtocolGuid could be removed from [Depex].
It will be more flexible for the library Consumer to work without VarCheck
protocol installed, for example at recovery boot mode with EmuRuntimeDxe.
The unused UefiLib is also been removed from [LibraryClasses] in *.inf.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In UEFI2.6, CapturePtr's in the Captures array returned by MatchString
are to be separatedly allocated so that they can be freed by the
caller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is an emergency fix for UINT64 multiplications and divisions not
being done with the right BaseLib functions -- they break Ia32 builds.
Fixes: 30ed3422ab
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
ConSplitter's Absolute Pointer should scale virtual device's resolution like what Simple Pointer do.
Before this change, caller will get Virtual device's resolution but physical device's current point.
This change let caller get Virtual device's resolution with virtual device's current point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Remove the ASSERT in UI code that may be triggered,
and clean up the useless code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In DriverSampleInit, has installed the configAccess protocol to
the DriverHandle[1], but don't uninstall it in DriverSampleUnload.
Now uninstall the configAccess protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Commit 7c50b34343 introduced
PcdMaxPeiPerformanceLogEntries16 to support > 256 PEI performance log
entries, but its PROMPT&HELP STR were forgotten to be added into *.uni.
Commit 7c50b34343 also updated
PcdMaxPeiPerformanceLogEntries HELP STR.
This patch is to add PcdMaxPeiPerformanceLogEntries16 PROMPT&HELP STR and
update PcdMaxPeiPerformanceLogEntries HELP STR in *.uni.
Cc: Shumin Qiu <shumin.qiu@intel.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Reviewed-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Since PcdHiiOsRuntimeSupport has added in the MdeModulePkg.dec file,
now add the usage information in the uni file.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
There some usefull functions in edk2 private modules that could be used,
so we added them to the httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The maximum number of PEI performance log entries is 255.
Add a new PCD, PcdMaxPeiPerformanceLogEntries16, to increase the maximum
number of PEI performance log entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Some static scan tool may regard CurrentRsdtEntry to be potentially
referenced to NULL pointer if CurrentRsdtEntry == NULL is used in
the right above if condition judgment.
CopyMem (CurrentRsdtEntry, CurrentRsdtEntry + 1, (*NumberOfTableEntries - Index) * sizeof (UINT32));
It is introduced by commit f9bbb8d9c3.
To avoid it and have same style with
"((Xsdt == NULL) || CurrentTablePointer64 == (UINT64) (UINTN) Table->Table)",
use Rsdt instead of CurrentRsdtEntry to check against NULL.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
The patch enhances the UefiBootManagerLib to use more user-friendly
network boot option description.
It builds description like below:
"PXEv6 (MAC:112233445566 VLAN1)"
"HTTPv4 (MAC:112233445566)"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
1. The consumer of Acpi Sdt Protocol may want to use the API after ReadyToLock.
2. The ACPI system configuration table even could be overwritten,
we see little issue in leaving Acpi Sdt Protocol installed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Failing to set EFI_MEMORY_UC to MMIO aperture is not a fatal error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Enhance BDS to support booting from a remote file system exposed
by a HTTP boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds short-form URI boot support to follow
UEFI Spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Enhance BDS to wide match the HTTP boot option without matching
the specific device path data in IP device path and URI device
path node.
It's to follow UEFI Spec 2.6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Change BmGetFileBufferByMemmapFv to BmGetFileBufferByFvFilePath.
The original function gets the file buffer only from memory mapped
FV device path and leaves GUIDed FV device path to the code below;
The new function gets the file buffer from both formats of FV device
paths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Fix a possible ASSERT after NBP finishes loading from a PXE
boot. Ip4Dxe driver calls Ip4Config2SetPolicy which calls
CloseEvent on the Dhcp4Event struct member. After NBP is
downloaded, it then calls Ip4Config2CleanInstance which calls
CloseEvent again on Dhcp4Event. This double free can cause an
ASSERT. When the event is closed, set the event pointer to NULL
so the Ip4 code won't call CloseEvent on it again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This feature is aimed to allow OS make use of the HII database
during runtime. In this case, the contents of the HII Database
is exported to a buffer. The pointer to the buffer is placed
in the EFI System Configuration Table, where it can be retrieved
by an OS application.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Brian J. Johnson <bjohnson@sgi.com>
Cc: Andrew Fish <afish@apple.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Remove the empty line to conform with current coding style.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The "pc" ("pc-i440fx-*") machine types of QEMU don't support extended
config space. Accordingly, OVMF will use the following library instances
in connection with the core PciHostBridgeDxe driver:
BasePciSegmentLibPci [class: PciSegmentLib]
BasePciLibCf8 [class: PciLib]
BasePciCf8Lib [class: PciCf8Lib]
Add a new field to the PCI_ROOT_BRIDGE structure so that
RootBridgeIoCheckParameter() can catch config space offsets above 0xFF on
such old (emulated) platforms.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
... in preparation for the next patch.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The device path protocol doesn't get closed at FvSimpleFilesystem
driver stop() when it's opened at start() with BY_DRIVER mode.
We change it to open DevicePath with GET_PROTOCOL mode as FV2 protocol with BY_DRIVER is enough.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Git version '3d0a49ad' commit provided a scenario to resolve the
performance issue for IPv4, but it's not workable for IPv6. To
avoid IPv4 and IPv6 inconsistency, we decided to revert that version
fix.
If so, the default policy for Ip4Config2 is Ip4Config2PolicyDhcp,
which results in all NIC ports attempting DHCP. So, this patch is
used to changes the the default IPv4 config policy to
Ip4Config2PolicyStatic and also defer the SetData operation after
Ip4Config2Protocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip4Config2Protocol.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Currently the EFI_FILE_EXPLORE_FORMSET_GUID value in BdsDxe in
IntelFrameworkModulePkg is same with the GUID VALUE in FileExplorerLib.
This patch is to modify the EFI_FILE_EXPLORE_FORMSET_GUID in
FileExplorerLib to avoid potential issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
when free up resource allocated for a MenuEntry, there exists
the case that the DevicePath and DisplayString are NULL,
so before calling FreePool function, need to check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When the DXE core is loaded, it invokes the PeCoffExtraActionLib library
function 'PeCoffLoaderRelocateImageExtraAction' explicitly, which may be
in addition to the same function having been called by the DxeIpl PE/COFF
loader instance.
The ImageContext that DXE core presents to this function is only partially
initialized, which may result in the following output on AArch64 systems:
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226240
<some intermediate output>
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226000
This is caused by incorrect data in the ImageContext structure, which means
the start of the .text section is calculated incorrectly. In general, it is
the duty of the caller to present a valid ImageContext structure, so let's
add the missing values before invoking PeCoffLoaderRelocateImageExtraAction().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch is to add a new interface to get the "Path" component according to
the URI parse result, it would be helpful for the library user to extract the
file path value in a URI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The StringSize variable in the FindStringBlock function is a IN OUT
parameter of the GetUnicodeStringTextOrSize function.
Thought the GetUnicodeStringTextOrSize function changes the value of
the StringSize variable, it is better to initialize the StringSize
variable before passing it to the GetUnicodeStringTextOrSize function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When PcdShadowPeimOnBoot is FALSE, they are not copied to memory and
execute from their original locations. Here, this policy should only
apply for PEIM and PEI_CORE, not for other file type, such as DXE_CORE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
The RamDiskDxe driver will:
1. Produce the EFI RAM Disk Protocol
2. Install RAM disk device path and block I/O related protocols on the
RAM disk device handle.
3. Install RAM disk configuration form to HII database
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some platform doesn't use CPU(HOST)/Device 1:1 mapping for PCI Bus.
But PCI IO doesn't have interface to tell caller (device driver)
whether the address returned by GetBarAttributes() is HOST address
or device address.
UEFI Spec 2.6 addresses this issue by clarifying the address returned
is HOST address and caller can use AddrTranslationOffset to calculate
the device address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For new PCDs add their usage information strings in UNI file.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
v3:
*
When there exists duplicate items in VLAN variable , save the correct
variable content back to the variable storage after duplicate items are removed
Duplicate items in VLAN variable will cause MNP driver binding
start function fall into infinite loop,so we should check it's
content before using it.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The ISO C standard says about free(),
If ptr is a null pointer, no action occurs.
This is not true of the FreePool() interface of the MemoryAllocationLib
class:
Buffer must have been allocated on a previous call to the pool
allocation services of the Memory Allocation Library. [...] If Buffer
was not allocated with a pool allocation function in the Memory
Allocation Library, then ASSERT().
Therefore we must not forward the argument of free() to FreePool() without
checking.
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Cc: Yao Jiewen <Jiewen.Yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-By: Cinnamon Shia <cinnamon.shia@hpe.com>
The assignment of CurrentRsdtEntry and its subsequent dereference are
subject to the same condition, but for some reason, VS2008 does not see
that and warns about the dereference possibly involving an uninitialized
pointer. Since the single statememt between the blocks is unrelated, we
can just move it and merge the two conditional blocks together.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch removes the assumption that the resources claimed by root
bridges should not exist. Because resources might have been added:
1. by platform modules either in PEI through resource HOB, or in DXE,
before the PCI host bridge driver runs.
2. Resources claimed by different root bridges may overlap so that
resource adding operation for latter root bridges may fail if
we assume the resource should not exist.
In real world, this patch is to fit OVMF platform needs because
different root bridges in OVMF platform shares the same resources.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: intersection-based implementation]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If 'CoreGetMemoryMap' return success the 'MemoryMap' shouldn't be NULL.
Add code to make sure this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Yao Jiewen <Jiewen.Yao@intel.com>
Now we add new HII action type EFI_BROWSER_ACTION_SUBMITTED in
EFI HII Configuration Access Protocol, so add the test case in
DriverSample to show how to use it and whether it works.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add new HII action type EFI_BROWSER_ACTION_SUBMITTED
to notify HII driver when its question values are submitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to the spec, each entry in the Memory
Attributes table shall have the same type as
the region it was carved out of in the UEFI memory map.
The current attribute uses RTData for PE Data, but
it should be RTCode.
This patch fixed the issue. It is validated with or
without PropertiesTable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is caused by my last commit,the LoadOption may
not initialize when call FreePool, and after investigation,
find that we can delete the LoadOption variable, this patch
is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
AARCH64 systems never require compatibility with legacy ACPI OSes, and
may not have any 32-bit addressable system RAM. To support ACPI on these
systems, we need to be able to relax the 4 GB allocation restriction.
So add a PCD PcdAcpiExposedTableVersions containing a bitmask describing
which ACPI versions are targeted, and wire it up it up to the memory
allocation calls in AcpiTableDxe/AcpiTableProtocol.c. I.e., if ACPI v1.0b
is not among the supported versions, the memory allocations are not limited
to 4 GB, and only table types that carry 64-bit addresses are emitted.
Note that this will inhibit the publishing of any tables that carry only
32-bit addresses, i.e., RSDPv1, RSDTv1 and RSDTv3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Since Shell supports finding help information from resource section
of application image. We enhance the HelloWorld to add help information
string. After the HelloWorld are loaded in system the help string will
be stored in resource section of the application image.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Refine the code in function Var_UpdateDriverOption and Var_UpdateBootOption,
use the existed API(EfiBootManagerInitializeLoadOption and
EfiBootManagerAddLoadOptionVariable) supplied by UefiBootManagerLib
to replace the same logic in the two functions. And remove the useless
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when has next line to draw, should not overwrite the BltX
to 0, instead should keep the BltX value that pass into
StringToImage function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
UEFI Spec 2.3.1.D Section 9.3.5.1 says Partitions are numbered
according to their entry in their respective partition table,
starting with 1.
Update the code for MBR partition to follow this rule.
Ref: https://github.com/tianocore/edk2/issues/50
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
FALSE
UEFI2.6 specification does not recommend to use BIT0
attribute for PropertiesTable, so we change default
value to FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Reviewed-by: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch fixes a bug in SNP driver that the Cdb.StatCode should be check with
PXE_STATCODE_SUCCESS instead of EFI_SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
SNP driver will print the UNDI returned StatFlags:StatCode with DEBUG macro,
while in some please it uses the reverse order (StatCode:StatFlags). This patch
is to make the print info consistent, that StatFlags always come first.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
MemoryAttributesTable generation need information in
PropertiesTable.
In memory attributes table generation path,
PropertiesTable need record original memory map and do
not merge the new memory map entry cross original
memory map boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Add MemoryAttributesTable generation in DxeCore.
We leverage the information collected by original
PropertiesTable, and publish runtime code/data to
another standalone table. So that this is a
compatible solution to report more PE Code/Data
information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Refine the function comments in ConfigKeywordHandler.c and
HiiDatabase.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
At the end of CoreFreePoolI(), the check to see if it is a specific
memory type should also cover OEM reserved memory type.
It was missed when adding OEM reserved memory type support at R17460.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If FV image without DXE depex, it will be dispatched by DxeCore.
If FV image with SMM depex, it is the invalid image. ASSERT will be trig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Fix UsbMouseAbsolutePointer driver GetState() interface to return
absolute value instead of relative value.
The driver is ported from UsbMouse driver. The GetState of
SimplePointer protocol returns relative value but the GetState
of AbsolutePointer protocol should return absolute value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to UEFI spec, a BUFFER_FULL return status in UNDI Transmit command
indicates UNDI "Transmit buffer is full. Call Get Status command toempty
buffer." So this patch updates the SNP Transmit to return EFI_NOT_READY for
BUFFER_FULL to let the call know the buffer full status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The MNP and SNP are independent drivers so the MNP_TX_BUFFER_INCREASEMENT could choose
any value as needed. While this patch update the default value of this macro to 32,
to be same as the maximum recycled buffer numbers in one UNDI GetStatus command. It is
a workaround for some incorrect UNDI drivers which may not return the correct statuses
for the SNP and MNP to correctly retry/call GetStatus to clear the buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Update the DBsize in GetStatus command to let UNDI return an array of recycled
buffers. This is to make the loop at the end of PxeGetStatus() useful and to
prevent buffer overflow with some non-conformant UNDI drivers which not check
the value of the input DBsize in UNDI GetStatus command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Description of the GetNextHighMonotonicCount does not state that the counter
is incremented on calling this function. However, the example usage of this
API documented relies on this behavior.
UEFI 2.6 spec is to update description to match usage documented.
The high 32-bit value is nonvolatile and is increased by 1 whenever the system
resets whenever the low 32-bit count (returned by GetNextMonoticCount()) overflows.
->
The high 32-bit value is nonvolatile and is increased by 1 whenever the system
resets, whenever GetNextHighMonotonicCount() is called, or whenever the low
32-bit count (returned by GetNextMonoticCount()) overflows.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19773 6f19259b-4bc3-4df7-8a09-765794883524
UEFI 2.6 spec has minor update to the Data parameter for GetVariable(),
and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data The buffer to return the contents of the variable.
->
Data The buffer to return the contents of the variable. May be NULL
with a zero DataSize in order to determine the size buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19771 6f19259b-4bc3-4df7-8a09-765794883524
These workhorse functions are part of the BlockIo protocol that
NvmExpressDxe produces. For bulk data access, they are called very
frequently. Their debug messages should be therefore downgraded to
EFI_D_VERBOSE.
In addition, the following DEBUG() warts are cleaned up:
- The function name should be printed with %a / __FUNCTION__, so that
renaming the function, or copying the DEBUG() elsewhere, be reflected in
the debug output automatically. (In fact, after this patch, the DEBUG()
calls become identical.)
- "Lba" is of type UINT64, therefore it should be printed with %Lx, not
%x.
- "OrginalBlocks" and "Blocks" are both UINTN. The only portable way to
print UINTN is to convert it to UINT64 manually, then format it with the
%Lx (or %Lu) conversion specifier.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19763 6f19259b-4bc3-4df7-8a09-765794883524
(HandoffInformationTable->EfiFreeMemoryBottom - Private->HobList.Raw)
is the PEI temp heap used instead of the length of PEI temp heap.
The length of PEI temp heap should be:
(HandoffInformationTable->EfiFreeMemoryTop - Private->HobList.Raw)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19762 6f19259b-4bc3-4df7-8a09-765794883524
Signal a closed event will still invoke the event notification function,
it could only be exposed when no the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
bit set in PcdDebugPropertyMask.
For example:
gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_CALLBACK,
CallbackFun,
NULL,
&Event
);
gBS->CloseEvent (Event);
gBS->SignalEvent (Event); <- CallbackFun still be invoked
Although the case to signal a closed event is abnormal, the code could
still be enhanced to avoid it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19754 6f19259b-4bc3-4df7-8a09-765794883524
String opcode has HiiValue and BufferValue,BufferValue for string content,
HiiValue for StringId.Function GetQuestionValue only update the
BufferValue(string content),but the StringId and string content
do not match,now fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19750 6f19259b-4bc3-4df7-8a09-765794883524
The BlockData is expected to be NULL when to call function
IsThisOpcodeRequired in each opcode,but now exists case that the
Blockdata not be cleaned,then will be used in other opcode.it
is not correct,now add the check before use.
The comments and logic in function IsThisOpcodeRequired are not
consistent,now refine the code to make the logic clear.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19749 6f19259b-4bc3-4df7-8a09-765794883524
For some SCSI commands, notably INQUIRY, it's relatively common for
the device to provide less data than we intended to read, and for
this reason EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET makes
InTransferLength and OutTransferLength read-write. Make ATAPI
aware of this.
This makes it possible to handle EFI_NOT_READY always, not just
for read as done in r19685.
I've chosen to use a break statement instead of calling
CheckStatusRegister directly; the break statement reaches a
pre-existing call the CheckStatusRegister function. This
ensures that the assignment to *ByteCount is not missed, and
adds a further sanity check to DRQClear.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19737 6f19259b-4bc3-4df7-8a09-765794883524
The Serial IO protocol instances provided by SerialDxe and consumed by
TerminalDxe come with a Mode.ReceiveFifoDepth=1 default setting, as
required by UEFI 2.5.
Although TerminalDxe calls EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the
TerminalDriverBindingStart() and TerminalConInTimerHandler() functions, it
only does so to change the Mode.Timeout member. Other members of Mode,
including Mode.ReceiveFifoDepth, are preserved.
On some platforms this causes the UART that underlies TerminalDxe not to
have enough room for bursts of scan codes, which translates to broken
parsing of escape sequences, e.g. cursor movement keys.
According to the UEFI spec, passing ReceiveFifoDepth=0 to
EFI_SERIAL_IO_PROTOCOL.SetAttributes() "will use the device's default FIFO
depth". While TerminalDxe could try to configure a receive FIFO depth that
matches the longest escape sequence it wishes to parse, in practice the
device-specific default FIFO depth -- which may well differ from the
spec-mandated SerialIo->Mode.ReceiveFifoDepth=1 default -- seems to work.
Hence let's just set that.
This issue was exposed by SVN r18971 / git commit 921e987b2b
("ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg").
In that conversion, MdeModulePkg's SerialDxe started to initialize
Mode.ReceiveFifoDepth to 1 (in conformance with the spec), unlike the
prior, non-conformant initialization to 0 in EmbeddedPkg's SerialDxe.
Since TerminalDxe would never change ReceiveFifoDepth from the new default
value 1, and the ArmPlatformPkg/Drivers/PL011Uart library instance,
underlying SerialDxe through SerialPortLib, would obey it too, they would
collectively effect a receive queue depth of 1, rather than the default 16
or 32. This broke cursor keys on the ARM FVP and Juno platforms.
It is the client of EFI_SERIAL_IO_PROTOCOL that is responsible for
modifying the attributes, if the defaults are not appropriate, hence this
patch modifies TerminalDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ryan Harkin <ryan.harkin@linaro.org>
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/4779/focus=6553
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/6594
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19701 6f19259b-4bc3-4df7-8a09-765794883524
In "11.8 Serial I/O Protocol", UEFI 2.5 requires:
The default attributes for all UART-style serial device interfaces are:
(a) 115,200 baud,
(b) a 1 byte receive FIFO,
(c) a 1,000,000 microsecond timeout per character,
(d) no parity,
(e) 8 data bits,
(f) and 1 stop bit.
It also says, about the EFI_SERIAL_IO_MODE.ControlMask member:
(g) A mask of the Control bits that the device supports. The device must
always support the Input Buffer Empty control bit.
SerialDxe complies with requirement (b) via hard-coded constants. It
complies with requirements (a), (d), (e) and (f) through PCD defaults (see
MdePkg/MdePkg.dec):
(a) 115,200 baud:
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200|UINT64|0x00000020
(d) no parity:
# 1 - No Parity.<BR>
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|1|UINT8|0x00000022
(e) 8 data bits:
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8|UINT8|0x00000021
(f) 1 stop bit:
# 1 - One Stop Bit.<BR>
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|1|UINT8|0x00000023
SerialDxe does not comply with requirements (c) and (g). In this patch, we
fix (c), and leave (g) for later.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19700 6f19259b-4bc3-4df7-8a09-765794883524
Per secure MOR implementation document, it is not proper to add MOR lock in non-SMM version, because DXE version can not provide protection.
This patch add standalone TcgMorLockDxe implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19689 6f19259b-4bc3-4df7-8a09-765794883524
Microsoft published secure MOR implementation at https://msdn.microsoft.com/en-us/library/windows/hardware/mt270973(v=vs.85).aspx
with revision 2 update. See URL for tech detail.
Previous revision 1 is handled in SecurityPkg\Tcg\ MemoryOverwriteRequestControlLock.
But the VarCheck API can not satisfy revision 2 requirement.
So we decide include MOR lock control into variable driver directly.
This patch add standalone TcgMorLockSmm implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19688 6f19259b-4bc3-4df7-8a09-765794883524
SVN r19611 (git commit 7cac240163), "MdeModulePkg/Ide: return correct
status when DRQ is not ready for ATAPI", changed the behavior of
AtaPacketReadWrite(), when DRQReady2() reported an error. The previous
logic had been to:
(a) terminate the transfer loop,
(b) check the status register with CheckStatusRegister(), and determine
AtaPacketReadWrite()'s return code directly from that.
Action (a) had been correct, but action (b) had masked genuine errors.
For example, when DRQReady2() reported EFI_TIMEOUT -- because the BSY bit
had not been cleared within the allotted time --, CheckStatusRegister()
would report EFI_SUCCESS, simply *because* BSY was still set, and the rest
of the status bits could not be evaluated.
SVN r19611 (git commit 7cac240163) intended to fix action (b) by directly
propagating the error code of DRQReady2() from AtaPacketReadWrite(),
eliminating the CheckStatusRegister() call. This was the right thing for
most of the errors reported by DRQReady2() -- timeout, command abort,
other device error --, but there was one exception: the "read" sub-case of
EFI_NOT_READY, which stands for "'read' complete, with less data available
than the requested amount".
Regarding the "write" sub-case of EFI_NOT_READY: the
AtaPacketCommandExecute() function programs the full transfer length into
the IDE device before it calls AtaPacketReadWrite(), and
AtaPacketReadWrite() only uses CylinderLsb and CylinderMsb for "chunking"
(as requested by the device). Therefore the device cannot justifiedly
clear DRQ earlier than seeing the entire data, when writing.
However, when reading from the device, a "short read" is a successful
operation. (The actual read length will be decoded by the higher level
protocols.) And "short reads" had been handled correctly by the logic
before git 7cac240163. Namely, when DRQReady2() returns EFI_NOT_READY, the
BSY bit is already clear, and we can call CheckStatusRegister() to
investigate all the other bits it cares about.
Therefore restore the logic from before git 7cac240163, but only for the
"read" sub-case of EFI_NOT_READY.
This problem was encountered with OVMF running on QEMU's i440fx IDE
emulation. Many thanks to John Snow for analyzing QEMU's behavior, and
pointing out that it adhered to the relevant specs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: John Snow <jsnow@redhat.com>
Reference: https://github.com/tianocore/edk2/issues/43
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19685 6f19259b-4bc3-4df7-8a09-765794883524
The DRQReady() and DRQReady2() functions only differ in that they poll
different status registers for BSY, ERR, and DRQ: the former looks at the
Status Register (clearing interrupt status), while the latter looks at the
Alternate Status Register (not clearing interrupt status).
They both correctly return a unique status code, EFI_NOT_READY, for the
BSY==0 && ERR==0 && DRQ==0
case; that is, when the device reports "command complete".
However, the functions' leading comments don't explain this case, so it's
easy to miss in callers. Update the comments.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: John Snow <jsnow@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19684 6f19259b-4bc3-4df7-8a09-765794883524
Rename the Ui libraries,so need to update the MdeModulePkg.dsc file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19668 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19666 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19664 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19662 6f19259b-4bc3-4df7-8a09-765794883524
This driver links to PciHostBridgeLib provided by platform/silicon to
produce PciRootBridgeIo and PciHostBridgeResourceAllocation protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19658 6f19259b-4bc3-4df7-8a09-765794883524
PciHostBridgeDxe driver needs PciHostBridgeLib implemented by platform
to provide the root bridge related information and may call into
PciHostBridgeLib when resource conflicts happen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19655 6f19259b-4bc3-4df7-8a09-765794883524
The MenuOption insert to gMenuOption allocate memory every time,but not free.
Now add the code to free it.And for Date/Time,it will create 3 menus,but previously
the Description point to the same address,so when free the Description,it will cause
issue,now reset the Description pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19647 6f19259b-4bc3-4df7-8a09-765794883524
This patch is used to add DNS QType and QClass values definition
in NetLib.h
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19642 6f19259b-4bc3-4df7-8a09-765794883524
When the GOP doesn't support the resolution specified by
PcdVideoHorizontalResolution and PcdVideoVerticalResolution,
the code tries to set the resolution to 800x600 but uses the resolution
equals to the PCD when calculating the text print position.
The patch fixes the bug by updating the resolution to 800x600 for
this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19630 6f19259b-4bc3-4df7-8a09-765794883524
When overriding compiler options '/GL' with '/GL-', VS2010 will report
warning C4701 potentially uninitialized local variable for 'LcrParity'
and 'LcrStop' in function SerialPortSetAttributes().
This commit fixes this build issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19628 6f19259b-4bc3-4df7-8a09-765794883524
Change EfiBootManagerDeleteLoadOptionVariable() to not just
remove #### from BootOrder but also remove Boot#### variable.
The old behavior tries to do less for performance but it leaves
unreferenced Boot#### which cannot be reclaimed in variable
reclaim operation though the Boot#### will be eventually be overwritten
by EfiBootManagerAddLoadOptionVariable().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19626 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the MNP driver to recycle TX buffer asynchronously, instead
of using a while loop wait after each transmit command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19624 6f19259b-4bc3-4df7-8a09-765794883524
This patch fixes a bug in SNP.GetStatus() interface. The UNDI driver may return
multiple transmitted buffers in a single GetStatus command, while SNP.GetStatus
could only return one pointer each time, the rest of them are lost. This patch
fixes this issue by store these recycled pointer in a temporary buffer in SNP
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19623 6f19259b-4bc3-4df7-8a09-765794883524
As ScsiDisk and ScsiBus driver are used to manage SCSI or ATAPI devices,
the timeout value is updated to 30s to follow ATA/ATAPI spec in which
the device may take up to 30s to respond command.
The change is used to solve device compatibility issue found with a TEAC
DV-W28S-WZ3 slim DVD plus a SONY AccuCORE DVD-R media in which the DVD
spends 8s to response READ_CAPACITY cmd after resetting the host machine.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19612 6f19259b-4bc3-4df7-8a09-765794883524
When executing ATAPI cmd at IDE mode, EFI_SUCCESS may be returned wrongly
with old logic but in fact DRQ is not ready and the transaction doesn't
get executed correctly at this time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19611 6f19259b-4bc3-4df7-8a09-765794883524
The MenuOption insert to gMenuOption allocate memory everytime,but not free.
Now add the code to free it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19593 6f19259b-4bc3-4df7-8a09-765794883524
Currently the invalid boot next set to the number of boot option,
when add a new boot option,also need update the boot next value,
otherwise it will be incorrect.Now set the type of BootNext value
to UINT32,the number out of the range of UINT16 means it is an
invalid BootNext Value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19591 6f19259b-4bc3-4df7-8a09-765794883524
Add error handling code to enhance the code,the driver may not install
the ConfigAccess protocol,so should not just ASSERT here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19590 6f19259b-4bc3-4df7-8a09-765794883524
Variable driver uses gEdkiiFaultTolerantWriteGuid hob and copies data to NvStorageData if hob exists.
But if ftw driver executes prior to variable driver then spare block is erased.
So the patch is to enhance the code to do not check FTW last write data hob if FTW protocol has been installed.
Cc: Liming Gao <liming.gao@intel.com>
Reported-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19577 6f19259b-4bc3-4df7-8a09-765794883524
The code wrongly has TempFlag wrote to NV flash, but has Flag assigned to NV cache.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19573 6f19259b-4bc3-4df7-8a09-765794883524
HwErrVariableTotalSize/CommonVariableTotalSize/CommonUserVariableTotalSize
need to be initialized to 0 first after reclaim failed, then to be assigned by += operation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19572 6f19259b-4bc3-4df7-8a09-765794883524
White space clean up for MdeModulePkg.dec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daocheng Bu <daocheng.bu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19486 6f19259b-4bc3-4df7-8a09-765794883524
Add IpmiLib and Ppi/Protocol header file. Update dec file
for new IpmiLib and Ppi/Protocol header file.
In V5,change for coding style.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daocheng Bu <daocheng.bu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19485 6f19259b-4bc3-4df7-8a09-765794883524
This commit will raise the Tpl to TPL_NOTIFY when adding non-blocking SCSI
I/O requests to the asynchronous task list.
This commit will also raise the Tpl of asynchronous task polling timer to
TPL_NOTIFY.
These changes are made to match the behavior in ScsiDiskDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19455 6f19259b-4bc3-4df7-8a09-765794883524
Raise the Tpl of async SCSI I/O callback function to TPL_NOTIFY to match
the behavior in ScsiDiskDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19454 6f19259b-4bc3-4df7-8a09-765794883524
When reading data from non-blockingly from a CD-ROM logic partition, the
procedure can be shown by the following call stack:
(The write process is similar)
|-------------------|
| DiskIoDxe (logic) |<---Raise Tpl to TPL_CALLBACK
|-------------------|
|
| Sub-task 1 (UnderRun) succeeds
|
| |-----------------| |-----------------| |-----------------|
+--->| PartitionDxe |---->| DiskIoDxe (Phy) |---->| ScsiDiskDxe |
| |-----------------| |-----------------| |-----------------|
|
| Sub-task 2 (OverRun) fails
|
| |-----------------| |-----------------| |-----------------|
+--->| PartitionDxe |---->| DiskIoDxe (Phy) |---->| ScsiDiskDxe |
| |-----------------| |-----------------| |-----------------|
| ^
| |
More subtasks... Wait indefinitely
|
|<---Restore Tpl
|
Completes
In PartitionDxe, if the 'Lba' and 'BufferSize' parameters passed to
function PartitionReadBlocksEx() are invalid, the function will issue a
blocking ReadDisk call (in function ProbeMediaStatusEx()).
In DiskIoDxe, blocking I/O request will wait for all the non-blocking I/O
requests to complete first before sending down the blocking request.
If the Tpl of the async I/O callback in ScsiDiskDxe is TPL_CALLBACK and
Sub-task 1 (UnderRun) succeeds but Sub-task 2 (OverRun) fails with an
invalid parameter, DiskIoDxe will wait indefinitely for the event created
by ScsiDiskDxe of Sub-task 1 to signal.
Hence, this commit will raise the Tpl of async IO callback in ScsiDiskDxe
to TPL_NOTIFY so that the indefinite wait in DiskIoDxe can be avoided.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19452 6f19259b-4bc3-4df7-8a09-765794883524
Some SCSI devices will return EFI_DEVICE_ERROR or EFI_TIMEOUT when the
data length of a SCSI I/O command is too large.
This commit will repeatedly retry sending the SCSI command with a data
length half of its previous value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19451 6f19259b-4bc3-4df7-8a09-765794883524
The functions ScsiRead10CommandEx(), ScsiWrite10CommandEx(),
ScsiRead16CommandEx() and ScsiWrite16CommandEx() in UefiScsiLib will not
signal the event passed from ScsiDiskDxe when error occurs.
In this case, ScsiDiskDxe should close the event passing to these APIs in
UefiScsiLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19449 6f19259b-4bc3-4df7-8a09-765794883524
In ScsiExecuteSCSICommand(), when SCSI devices do not support non-blocking
I/O but an event is passed from caller (UefiScsiLib), the function will
execute the SCSI I/O command in a blocking manner and signal the caller
event when the command completes.
Originally, caller event from UefiScsiLib will be signaled if the SCSI
command fails. UefiScsiLib will continue to signal its caller (BlockIO2
request from ScsiDiskDxe driver), which is not aligned with the UEFI spec
that event will not be signaled when BlockIO2 request returns with error.
This commit will signal ScsiExecuteSCSICommand()'s caller event only when
the SCSI command succeeds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19447 6f19259b-4bc3-4df7-8a09-765794883524
Add check to see if there is a media in the disk device. If not return
EFI_NO_MEDIA directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19446 6f19259b-4bc3-4df7-8a09-765794883524
The functions ScsiDiskWriteBlocks(Ex) in ScsiDiskDxe/ScsiDisk.c do not
check whether the device is allow to be written originally.
This commit will add read-only check to follow the UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19445 6f19259b-4bc3-4df7-8a09-765794883524
The function ScsiDiskFlushBlocksEx() in ScsiDiskDxe/ScsiDisk.c originally
always returns EFI_SUCCESS, which is not aligned with the UEFI spec.
This commit adds addtional checks to see if the media in the device is
changed or removed. Check for whether the device can be written is also
added. Corresponding status will be returned according to the check
result.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19444 6f19259b-4bc3-4df7-8a09-765794883524
When do UiApp remodeling task,miss clearing the screen before booting
the selected boot option,so cause some behaviors change.Now add the code
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19441 6f19259b-4bc3-4df7-8a09-765794883524
Currently BootManager is an independent library,used by UiApp.It only load boot
option when enter UiApp.So when add boot option through boot maintenance manager,
it will not display in boot manager. In order to fix this issue,now we update the
boot manager form every time we enter it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19440 6f19259b-4bc3-4df7-8a09-765794883524
The single line for(); construct is followed by code that is indented.
This triggers the -Wempty-body warning. Fix indentation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19420 6f19259b-4bc3-4df7-8a09-765794883524
Xcode fails to compile:
error: array type 'VA_LIST' (aka '__builtin_va_list') is not assignable
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19419 6f19259b-4bc3-4df7-8a09-765794883524
Add clarification for PcdAcpiDefaultOemTableId, PcdAcpiDefaultOemRevision,
PcdAcpiDefaultCreatorId, PcdAcpiDefaultCreatorRevision.
According to ACPI spec, they are used as special meaning for SSDT,
so we ignore them in updating generic SSDT provided by EDKII.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19321 6f19259b-4bc3-4df7-8a09-765794883524
In DxeCore, use warning message for Runtime driver that doesn't satisfy
section alignment requirement. This check is required when PropertiesTable
is installed. So, add error message if PropertiesTable can't be installed
successfully.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19312 6f19259b-4bc3-4df7-8a09-765794883524
When HttpLib parsing the last chunked data down, the Http NextMsg pointer
in the HttpBodyParserCallback function should point to the character
after '/n' flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19310 6f19259b-4bc3-4df7-8a09-765794883524
Operands in a bitwise operation have different size. Update code to fix it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19309 6f19259b-4bc3-4df7-8a09-765794883524
The caller has initial the input parameter before call this function, So this code is useless.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19302 6f19259b-4bc3-4df7-8a09-765794883524
On a failed REF_OP callback, all changed fields in the Selection should be restored.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19268 6f19259b-4bc3-4df7-8a09-765794883524
In function SignalCallerEvent(), 'Private' and 'TransReq' are dereferenced
before NULL checking.
Since the function assumes that both 'Private' and 'TransReq' passed in
are not NULL pointer, this commit will add an ASSERT to make sure the
above assumption is satisfied.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19266 6f19259b-4bc3-4df7-8a09-765794883524
On a failed REF_OP callback, all changed fields in the Selection should be restored.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19245 6f19259b-4bc3-4df7-8a09-765794883524
Add missing braces in module global mControllerDevicePathTemplate.
Initialize ControllerNumber and ContainsControllerNode in
SerialControllerDriverStart() to address warning for potential use
before initialization warning.
Move initialization of local SerialIo earlier in
SerialControllerDriverStart() to address warning for potential use
before initialization warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19232 6f19259b-4bc3-4df7-8a09-765794883524
This should just return an error and not assert. We hit this when testing with a client that was trying to access the old IP4_CONFIG on firmware implementing IP4_CONFIG2.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19219 6f19259b-4bc3-4df7-8a09-765794883524
For function ScsiExecuteSCSICommand(), when the 'Event' parameter is not
NULL but the target SCSI device does not support non-blocking I/O, it will
execute a blocking I/O operation instead.
However, after the SCSI operation is done, the 'Event' is not signaled to
inform the caller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19217 6f19259b-4bc3-4df7-8a09-765794883524
PciSioSerialDxe driver can manages UARTs on a SIO chip or a PCI/PCIE
card.
It manages the SIO instance whose last device path node is a ACPI
device path and the HID in the ACPI device path node equals to
EISA_PNP_ID (0x501).
It also manages the PCI IO instance whose class code is 7/0/2 (16550
UART). But when proper value is set to PcdPciSerialParameters, the
driver can also manage non-standard PCI serial cards by matching
the Vendor ID and Device ID specified in PcdPciSerialParameters.
The PCI BAR index, IO/MMIO offset, register stride, clock rate can
also be specified through the same PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19179 6f19259b-4bc3-4df7-8a09-765794883524
DeployedMode & AuditMode are UINT8 Global variable according to Enable Secure Boot feature defined in UEFI2.5 Mantis 1263. Add them to var check list.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19131 6f19259b-4bc3-4df7-8a09-765794883524
If the assert happens in a library, then it's hard to determine which module
using that library is generating that assert. Use gEfiCallerBaseName in
DebugAssert to display the module name.
V2: Updated code to use copy mem and ModuleNameSize calculation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19128 6f19259b-4bc3-4df7-8a09-765794883524
warning C4311: pointer truncation from 'void *' to 'unsigned long'
warning C4312: conversion from 'unsigned long' to 'void *' of greater size
Update code to convert type to UINTN first, then convert it to other type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Acked-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19114 6f19259b-4bc3-4df7-8a09-765794883524
warning C4456: declaration of 'q' hides previous local declaration.
Update code to use the different local variable name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Acked-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19113 6f19259b-4bc3-4df7-8a09-765794883524
warning C4459: declaration of 'PrivateData' hides global declaration.
Update DriverSampleDxe to rename global variable name to be different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19112 6f19259b-4bc3-4df7-8a09-765794883524
BDS puts a special GUID in boot option optional data for
auto-discovered boot option. But when launching that boot
option, the BDS core unconditionally pass the special GUID
to the executable.
A good written application/OS loader can ignore the unexpected
parameters, but BDS core should still avoid passing the
unnecessary GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19007 6f19259b-4bc3-4df7-8a09-765794883524
Add comments in INF file in BootMaintenanceManagerLib.inf.
Refine the comments in INF file in FileExplorerLib.inf
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18975 6f19259b-4bc3-4df7-8a09-765794883524
This Serial driver layers on top of a Serial Port Library instance
to produce serial IO protocol.
There is also another SerialDxe implementation in CorebootPayloadPkg,
but SerialDxe from EmbeddedPkg should be better that also consumes
the extended interfaces GetControl/SetControl/SetAttributes in
EmbeddedPkg/Include/Library/SerialPortExtLib.h for serial IO protocol.
And the extended interfaces GetControl/SetControl/SetAttributes in
EmbeddedPkg/Include/Library/SerialPortExtLib.h has been upstream to
MdePkg/Include/Library/SerialPortLib.h.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18966 6f19259b-4bc3-4df7-8a09-765794883524
The SerialIo->GetControl() function is not required to set the
Control output parameter on error. Make sure we apply the
EFI_SERIAL_INPUT_BUFFER_EMPTY optimization in
TerminalConInTimerHandler() only if the SerialIo->GetControl()
function call set that bit in the Control variable.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18962 6f19259b-4bc3-4df7-8a09-765794883524
We had put communication buffer to Runtime memory,
so that SMI handler can know it is not used by OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18949 6f19259b-4bc3-4df7-8a09-765794883524
PiSmmCore installs LoadedImage for each SMM driver. However itself is missing.
So we follow DxeCore style, let PiSmmCore installs LoadedImage protocol for itself,
then the SMM image information is complete.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18945 6f19259b-4bc3-4df7-8a09-765794883524
Original code does not uninstall LoadedImage protocol if SMM driver returns error and is unloaded.
It causes a wrong LoadedImage protocol existing in system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18936 6f19259b-4bc3-4df7-8a09-765794883524
Original code refers FreePoolHdr without check Status. It is obvious wrong and has risk.
Aslo, if InternalAllocPoolByIndex() returns an error, then *FreePoolHdr is assigned to an uninitialized value. So we init Hdr be NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18932 6f19259b-4bc3-4df7-8a09-765794883524
Align to old BDS behavior (IntelFrameworkModulePkg/BDS) to always create
MemoryTypeInfo variable regardless of the PcdResetOnMemoryTypeInformationChange
value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18926 6f19259b-4bc3-4df7-8a09-765794883524
Use new created libraries(Boot Manager,Device Manager,Boot Maintenance
Manager) in UiApp.So remove and refine relative code in UiApp.And update
the Nt32Pkg.dsc and MdeModulePkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18924 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot maintenance manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18923 6f19259b-4bc3-4df7-8a09-765794883524
Split the device manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18922 6f19259b-4bc3-4df7-8a09-765794883524
Feng Tian
Dandan Bi
Ruiyu Ni
Liming Gao
Zhang Lubo
Star Zeng
Hao Wu
Qiu, Shumin
Thomas Palmer
Jeremy Linton
Laszlo Ersek
Fu Siyuan
Samer El-Haj-Mahmoud
Heyi Guo
Ard Biesheuvel
Alcantara, Paulo
Cecil Sheng
Derek Lin
Jiaxin Wu
Ghazi Belaam
Cinnamon Shia
Samer El-Haj-Mahmoud
Jiewen Yao
Ni, Ruiyu
Chao Zhang
Paolo Bonzini
Eric Dong
Daocheng Bu
Andrew Fish
Jordan Justen
Michael Kinney
Eugene Cohen
Baraneedharan Anbazhagan