Non-discoverable devices need to be registered explicitly by the platform.
Introduce a helper library that takes care of this.
This implementation currently only supports registering devices that are
covered by one or more MMIO resources. The underlying protocol allows for
more flexibility than that, but this is currently sufficient for the use
cases that we know about.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Introduce a protocol that can be exposed by a platform for devices that
are not discoverable, usually because they are wired straight to the
memory bus rather than to an enumerable bus like PCI or USB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
* Introduce a generic Debugger Configuration protocol.
* Add private configuration data in the EBC Debugger and make it
register the Debugger Configuration protocol on initialization.
* Add a shell application that uses the protocol above to access
the private data in order to configure the EBC debugger.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This table describes the SMM memory attributes.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
1) Add capsule related library.
FmpAuthenticationLib
2) Add capsule related status code PCD.
PcdStatusCodeSubClassCapsule
PcdCapsuleStatusCodeProcessCapsulesBegin
PcdCapsuleStatusCodeProcessCapsulesEnd
PcdCapsuleStatusCodeUpdatingFirmware
PcdCapsuleStatusCodeUpdateFirmwareSuccess
PcdCapsuleStatusCodeUpdateFirmwareFailed
PcdCapsuleStatusCodeResettingSystem
3) Add capsule status variable PCD - CapsuleMax value.
PcdCapsuleMax
4) Add system FMP indicator PCD - used by ESRT.
PcdSystemFmpCapsuleImageTypeIdGuid
5) Add PcdTestKeyUsed PCD.
This PCD can be set by platform to indicate if there is any
test key used in current BIOS, such as recovery key,
or capsule update key.
Then the generic UI may consume this PCD to show warning information.
Other platform driver may also consume this PCD to know such info,
and report it via platform specific way.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
When PciBus is built as EBC, PcdPciDegradeResourceForOptionRom does
not have associated value resulting build failure.
The patch sets the default value to TRUE, covering the EBC ARCH.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in FatPei and CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The two libraries are created to support old BootLogoLib to
decode the images. Due to the new BootLogoLib starts using
HiiImageEx interfaces, the two libraries are not needed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Change PlatformLogo protocol to return EFI_IMAGE_INPUT instead of
RAW image data. PlatformLogo implementation can use HiiImageEx to
decode the image if it's JPEG or PNG format.
2. Change BootLogoLib to consume the new PlatformLogo protocol.
3. Change BootLogoEnableLogo() to only use images returned from
PlatformLogo protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The 'universal' PCI bus driver in MdeModulePkg contains a quirk to
degrade 64-bit PCI MMIO BARs to 32-bit in the presence of an option
ROM on the same PCI controller.
This quirk is highly specific to not just the X64 architecture in general,
but to the PC platform in particular, given that only X64 platforms that
require legacy PC BIOS compatibility require it. However, making the
quirk dependent on the presence of the legacy BIOS protocol met with
resistance, due to the fact that it introduces a dependency on the
IntelFrameworkModulePkg package.
So instead, make the quirk configurable, by introducing a feature flag PCD
'PcdPciDegradeResourceForOptionRom' which defaults to TRUE only for X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Provides services to record memory profile of multilevel caller.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current memory profile feature:
1. Shows which line of code calls gBS->AllocateXXX(). But most entries
are from MemoryAllocationLib.
2. Records at the start.
3. Records all modules.
Enhanced memory profile feature:
1. User can know which line of code calls AllocateXXX() API instead of
gBS->Allocate().
2. User can know which line of code calls a specific API that will call
AllocateXXX().
3. User can know total memory allocated by a specific line of code.
4. User can configure to record single module.
5. User can configure when to enable recording.
6. User can know RVA<->Symbol (Function, Source, Line).
For the enhanced memory profile feature,
1. Extend MEMORY_PROFILE_DRIVER_INFO to include PdbString.
2. Extend MEMORY_PROFILE_ALLOC_INFO to include ActionString.
3. Extend MEMORY_PROFILE_ACTION to indicate action in memory allocation
lib and user defined action.
4. Extend memory profile protocol to include GetRecordingState/
SetRecordingState/Record.
5. Define SMM memory profile protocol.
6. Extend PcdMemoryProfilePropertyMask to support disable recording at
the start.
7. Introduce new PCD PcdMemoryProfileDriverPath to control which drivers
need memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Prevent the BmRepairAllControllers routine in an infinite loop
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Li <garyli@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This configuration table is used to describe platform pre-allocated memory
for SMM communication buffer. If DXE driver wants to communicate with SMM
agent, it can use this memory as SMM communication buffer instead of allocate
new memory region.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
gEfiPs2PolicyProtocolGuid and PcdFastPS2Detection was missed when
resolving the conflict.
Check in the two definition to MdeModulePkg.dec to fix build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The S3Ready() functional code in AcpiS3SaveDxe of IntelFrameworkModulePkg
is to do ACPI S3 Context save. In fact, that is not really related to
Intel framework ACPI S3 protocol.
IntelFrameworkModulePkg will be deprecated step by step, so move the
functional code to MdeModulePkg and S3SaveStateDxe is a good place.
The ACPI global variable related code is leaved as is in IntelFrameworkModulePkg
AcpiS3SaveDxe for compatibility.
PcdS3BootScriptStackSize is also moved from IntelFrameworkModulePkg.
The functional code need to get ACPI FACS table and consume LockBoxLib,
so need to be before DxeSmmReadyToLock that will shut down SMM lock box
interface, EndOfDxe is a good point (OVMF AcpiS3SaveDxe has the reference
implementation).
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Platform can configure the PCD statically or dynamically
to control if ACPI S3 will be enabled.
S3 related modules can consume the PCD to control the code.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This stack includes:
1. Dxe phase support by:
1) SdMmcPciHcDxe driver to consume PciIo and produce
SdMmcPassThru.
2) SdDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2.
3) EmmcDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2/SSP.
2. Pei phase support
1) SdBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
2) EmmcBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
3) SdMmcPciHcPei driver to produce SdMmcHostController
Ppi.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The maximum number of PEI performance log entries is 255.
Add a new PCD, PcdMaxPeiPerformanceLogEntries16, to increase the maximum
number of PEI performance log entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This feature is aimed to allow OS make use of the HII database
during runtime. In this case, the contents of the HII Database
is exported to a buffer. The pointer to the buffer is placed
in the EFI System Configuration Table, where it can be retrieved
by an OS application.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Brian J. Johnson <bjohnson@sgi.com>
Cc: Andrew Fish <afish@apple.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The RamDiskDxe driver will:
1. Produce the EFI RAM Disk Protocol
2. Install RAM disk device path and block I/O related protocols on the
RAM disk device handle.
3. Install RAM disk configuration form to HII database
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
AARCH64 systems never require compatibility with legacy ACPI OSes, and
may not have any 32-bit addressable system RAM. To support ACPI on these
systems, we need to be able to relax the 4 GB allocation restriction.
So add a PCD PcdAcpiExposedTableVersions containing a bitmask describing
which ACPI versions are targeted, and wire it up it up to the memory
allocation calls in AcpiTableDxe/AcpiTableProtocol.c. I.e., if ACPI v1.0b
is not among the supported versions, the memory allocations are not limited
to 4 GB, and only table types that carry 64-bit addresses are emitted.
Note that this will inhibit the publishing of any tables that carry only
32-bit addresses, i.e., RSDPv1, RSDTv1 and RSDTv3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
FALSE
UEFI2.6 specification does not recommend to use BIT0
attribute for PropertiesTable, so we change default
value to FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Reviewed-by: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
PciHostBridgeDxe driver needs PciHostBridgeLib implemented by platform
to provide the root bridge related information and may call into
PciHostBridgeLib when resource conflicts happen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19655 6f19259b-4bc3-4df7-8a09-765794883524
White space clean up for MdeModulePkg.dec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daocheng Bu <daocheng.bu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19486 6f19259b-4bc3-4df7-8a09-765794883524
Add IpmiLib and Ppi/Protocol header file. Update dec file
for new IpmiLib and Ppi/Protocol header file.
In V5,change for coding style.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daocheng Bu <daocheng.bu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19485 6f19259b-4bc3-4df7-8a09-765794883524
Add clarification for PcdAcpiDefaultOemTableId, PcdAcpiDefaultOemRevision,
PcdAcpiDefaultCreatorId, PcdAcpiDefaultCreatorRevision.
According to ACPI spec, they are used as special meaning for SSDT,
so we ignore them in updating generic SSDT provided by EDKII.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19321 6f19259b-4bc3-4df7-8a09-765794883524
PciSioSerialDxe driver can manages UARTs on a SIO chip or a PCI/PCIE
card.
It manages the SIO instance whose last device path node is a ACPI
device path and the HID in the ACPI device path node equals to
EISA_PNP_ID (0x501).
It also manages the PCI IO instance whose class code is 7/0/2 (16550
UART). But when proper value is set to PcdPciSerialParameters, the
driver can also manage non-standard PCI serial cards by matching
the Vendor ID and Device ID specified in PcdPciSerialParameters.
The PCI BAR index, IO/MMIO offset, register stride, clock rate can
also be specified through the same PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19179 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18921 6f19259b-4bc3-4df7-8a09-765794883524
This driver produces file explorer protocol layered on top of the FileExplorerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18918 6f19259b-4bc3-4df7-8a09-765794883524
This library support select one file from the specified directory or from system root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18917 6f19259b-4bc3-4df7-8a09-765794883524
The library itself doesn't provide any image decoding capabilities but
manages the different image decoders.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18770 6f19259b-4bc3-4df7-8a09-765794883524
Allow platforms to instantiate this PCD as PcdsDynamic and PcdsDynamicEx
too, not just PcdsFixedAtBuild and PcdsPatchableInModule.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18468 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Remove a hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback".
1.1. Use SmmExitBootServices and SmmLegacyBoot notification to record
AtRuntime flag.
1.2. Use mBootScriptDataBootTimeGuid LockBox to save boot time boot
script data to handle potential INSERT boot script at runtime in SMM.
2. Do not depend on OS to help restore ACPINvs data and use
EfiReservedMemoryType instead of EfiACPIMemoryNVS.
2.1. Use mBootScriptSmmPrivateDataGuid LockBox to save boot script
SMM private data with BackFromS3 = TRUE at runtime. S3 resume
will help restore it to tell the Library the system is back
from S3.
Why to do:
1. The hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback" will cause confusion to
the library's consumer and block the usage of "SMM driver writes
BootScript after SmmReadyToLock". So Remove the assumption.
2. In original code, there might be a corner case that malicious
code patch ACPINvs boot TableLength field same as SMM boot script.
So that it can skip the table restore. The impact is that BootScript
in SMM may be overridden by malicious code.
--------------------
CopyMem ((VOID*)&TableHeader, (VOID*)mS3BootScriptTablePtr->TableBase, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
if (mS3BootScriptTablePtr->TableLength + sizeof(EFI_BOOT_SCRIPT_TERMINATE) != TableHeader.TableLength) { // TableLength is in NVS
......
//
// NOTE: We should NOT use TableHeader.TableLength, because it is already updated to be whole length.
//
mS3BootScriptTablePtr->TableLength = (UINT32)(mLockBoxLength - sizeof(EFI_BOOT_SCRIPT_TERMINATE)); ? This line can be skipped.
--------------------
So use EfiReservedMemoryType instead of EfiACPIMemoryNVS as the code
has been updated to not depend on OS to help restore ACPINvs data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18467 6f19259b-4bc3-4df7-8a09-765794883524
The check will be based on VarCheckHiiBin that generated
from FV and Hii Database.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18293 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add VarCheckLib LibraryClass definitions.
2. Implement VarCheckLib library instance.
The code logic are separated from Variable driver.
Why to do: Share code.
Separate variable check service from Variable driver in MdeModulePkg.
We are going to separate generic software logic code from Variable Driver
to benefit other variable driver implementation. Auth services has been done
to be AuthVariableLib, now to cover variable check service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18278 6f19259b-4bc3-4df7-8a09-765794883524
This feature is added for UEFI spec that says
"Stack may be marked as non-executable in identity mapped page tables".
A PCD PcdSetNxForStack is added to turn on/off this feature, and it is
FALSE by default.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18166 6f19259b-4bc3-4df7-8a09-765794883524
v2 changelog:
Check CurrentPeimHandle to check the matched PeimHandle.
Add check point to ShadowPeiCore based on PCD.
v1 changelog:
PeiCore LoadImage always shadow itself and PEIM on normal boot after
the physical memory is installed. On the emulator platform, the shadow
may be not necessary. To support such usage, new PCD PcdShadowPeimOnBoot
is introduced to specify whether loads PEIM in memory by default.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18125 6f19259b-4bc3-4df7-8a09-765794883524
This is the UI part of the old BdsDxe driver, also remove the legacy boot option related code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18111 6f19259b-4bc3-4df7-8a09-765794883524
Remove two protocols never used in DxeNetLib.inf and add HttpLib access in MdeModulePkg.dec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17983 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Dependent network drivers, libraries and applications have been migrated to (or extended to) the new protocol version.
For example:
git 7c25b7ea (SVN r17869): ping & ifconfig
git 00a6ad1b (SVN r17870): UefiHandleParsingLib
git 6c5c70d6 (SVN r17873): DxeNetLib
git 39561686 (SVN r17874): IpSecDxe
git c581e503 (SVN r17875): EfiSocketLib
This patch is based on related packages(MdeModulePkg, Nt32Pkg, ArmPlatformPkg, ArmVirtPkg, EmulatorPkg, OvmfPkg, Vlv2TbltDevicePkg) clean-up work finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17917 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add AuthVariableLib LibraryClass definitions.
2. Implement a NULL AuthVariableLib library instance.
3. Add VARIABLE_ENTRY_PROPERTY definition to VarCheck.h.
4. Add VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h.
Why to do:
1. Share code.
1.1. Separate auth variable service from Auth Variable driver in
SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
1.2 The VARIABLE_ENTRY_PROPERTY definition to VarCheck.h,
VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h will be shared
by merged Variable driver and AuthVariableLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17757 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Move authenticated variable definition from AuthenticatedVariableFormat.h
to VariableFormat.h with gEfiAuthenticatedVariableGuid and
AUTHENTICATED_VARIABLE_HEADER.
Why to do:
1. Share code.
We are moving forward to separate auth variable service from Auth Variable
driver in SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
2. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. We are going to
merge them.
3. gEfiAuthenticatedVariableGuid will be used by both merged Variable driver
and AuthVariableLib, AUTHENTICATED_VARIABLE_HEADER will be used by
merged Variable driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17754 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Move TpmMeasurementLib LibraryClass from SecurityPkg to MdeModulePkg.
2. Implement a NULL TpmMeasurementLib library instance.
Why to do:
1. Share code.
We are moving forward to separate auth variable service from Auth Variable
driver in SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
2. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. We are going to
merge them.
3. TpmMeasurementLib is consumed by Auth Variable driver in SecurityPkg now,
as Auth Variable driver in SecurityPkg will be merged to Variable driver in
MdeModulePkg, so the library class also needs to be moved to MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17753 6f19259b-4bc3-4df7-8a09-765794883524
And also SMM Ready To Boot.
The SMM Exit Boot Service protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_EXIT_BOOT_SERVICES
to notify SMM driver that system enter exit boot services.
The SMM Legacy Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_LEGACY_BOOT_GUID
to notify SMM driver that system enter legacy boot.
The SMM Ready To Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_READY_TO_BOOT
to notify SMM driver that system enter ready to boot.
After them, any SMM drivers can get protocol notify on what happened
in DXE phase, then there is no need to let each individual SMM driver
to register SMM Communication Handler for that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17657 6f19259b-4bc3-4df7-8a09-765794883524
Currently, Max Authenticated variable size = Max Regular Variable Size,
and both are controlled via a single PCD:
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize.
This PCD is introduced to control the Max Size of Authenticated Variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17609 6f19259b-4bc3-4df7-8a09-765794883524
So it could allow platform module to change the serial clock rate per different hardware.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17606 6f19259b-4bc3-4df7-8a09-765794883524
Display engine base on class opcode to detect whether in
front page.Now remove class/subclass and use FormsetGuid
or ClassGuid to judge whether in front page
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17590 6f19259b-4bc3-4df7-8a09-765794883524
Move ACPI default PCDs
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision
from [PcdsFixedAtBuild, PcdsPatchableInModule] to
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
to cover some platforms want to update them at boot time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17542 6f19259b-4bc3-4df7-8a09-765794883524
BdsDxe driver links to UefiBootManagerLib and PlatformBootManager to
provide a pure UEFI boot manager conforming to the UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17328 6f19259b-4bc3-4df7-8a09-765794883524
It includes 4 drivers:
1. UfsPassThruDxe, which is a UEFI driver and consumes EFI_UFS_HOST_CONTROLLER_PROTOCOL and produces EFI_EXT_SCSI_PASS_THRU_PROTOCOL
2. UfsPciHcDxe, which is specific for pci-based UFS HC implementation and is a UEFI driver to produce EFI_UFS_HOST_CONTROLLER_PROTOCOL.
3. UfsBlockIoPei, which is a PEI driver and consumes EFI_UFS_HOST_CONTROLLER_PPI and produces EFI_PEI_VIRTUAL_BLOCK_IO_PPI.
4. UfsPciHcPei, which is specific for pci-based UFS HC implementation and is a PEI driver to produce EFI_UFS_HOST_CONTROLLER_PPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17246 6f19259b-4bc3-4df7-8a09-765794883524
Add stride PCD to MdeModulePkg to support 16550 UARTs with a register stride that is not 1 byte.
The default value is 1 byte.
Quark SoC uses a stride of 4 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17215 6f19259b-4bc3-4df7-8a09-765794883524
Add SMBIOS 64-bit entry point and 64-bit table support for SMBIOS 3.0.
Introduce PcdSmbiosEntryPointProvideMethod to produce 32-bit or 64-bit
SMBIOS table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17051 6f19259b-4bc3-4df7-8a09-765794883524
for trying to reclaim variable space at EndOfDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16687 6f19259b-4bc3-4df7-8a09-765794883524
Move libraries from ShellPkg into MdeModulePkg and MdePkg.
The following libraries are being migrated out of ShellPkg in order to make
their functionality more widely available.
• PathLib: Incorporate into MdePkg/Library/BaseLib
• FileHandleLib: MdePkg/Library/UefiFileHandleLib
• BaseSortLib: MdeModulePkg/Library/BaseSortLib
• UefiSortLib: MdeModulePkg/Library/UefiSortLib
Diffs showing file changes are in the attached file, LibMigration.patch.
A description of the changes follows:
• Move ShellPkg/Include/Library/FileHandleLib.h to MdePkg/Include/Library/FileHandleLib.h
• Move ShellPkg/Include/Library/SortLib.h to MdeModulePkg/Include/Library/SortLib.h
• Move ShellPkg/Library/BaseSortLib to MdeModulePkg/Library/BaseSortLib
• Move ShellPkg/Library/UefiSortLib to MdeModulePkg/Library/UefiSortLib
• Move ShellPkg/Library/BasePathLib/BasePathLib.c to MdePkg/Library/BaseLib/FilePaths.c
• Merge ShellPkg/Include/Library/PathLib.h into MdePkg/Include/Library/BaseLib.h
• Delete ShellPkg/Library/BasePathLib; Includes BasePathLib.c and BasePathLib.inf
• NetworkPkg/NetworkPkg.dsc
• PerformancePkg.dsc
• OvmfPkg/OvmfPkgX64.dsc
• OvmfPkg/OvmfPkgIa32X64.dsc
• OvmfPkg/OvmfPkgIa32.dsc
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
• MdeModulePkg/MdeModulePkg.dec
o Add SortLib library class
• MdePkg/MdePkg.dec
o Add FileHandleLib library class
o Add PcdUefiFileHandleLibPrintBufferSize PCD
• MdePkg/Library/BaseLib/BaseLib.inf
o Add FilePaths.c to [Sources]
• MdePkg/Include/Library/BaseLib.h
o Update file description to include "file path functions"
• ShellPkg/ShellPkg.dsc
o Change PACKAGE_GUID to { C1014BB7-4092-43D4-984F-0738EB424DBF }
o Update PACKAGE_VERSION to 1.0
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
o Remove ShellPkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf from [Components]
• ShellPkg/ShellPkg.dec
o Update PLATFORM_VERSION to 1.0
o Remove declarations of the FileHandleLib, SortLib, and PathLib Library Classes
o Update comment for the PcdShellPrintBufferSize PCD.
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
• ShellPkg/Application/Shell/Shell.inf
o Remove PathLib from [LibraryClasses]
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.h
• ShellPkg/Application/Shell/Shell.h
o Remove #include <Library/PathLib.h>
• ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
o Add PathLib to [LibraryClasses]
• ShellPkg/Library/UefiShellLevel1CommandsLib/If.c
o Remove #include <Library/PathLib.h>
• ShellPkg/Application/ShellSortTestApp/ShellSortTestApp.inf
o Add MdeModulePkg/MdeModulePkg.dec to [Packages]
• MdeModulePkg/Library/BaseSortLib/BaseSortLib.inf
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
o Replace ShellPkg.dec with MdeModulePkg.dec in [Packages]
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.c
o Remove #include <ShellBase.h>
o Define USL_FREE_NON_NULL() to replace SHELL_FREE_NON_NULL()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16601 6f19259b-4bc3-4df7-8a09-765794883524
and follow UEFI spec to check UEFI defined variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16579 6f19259b-4bc3-4df7-8a09-765794883524
1. Work space and spare block must be in a FVB with FV header.
Updated to work space and spare block could be in independent FVBs that are without FV header.
2. NV region, work space and spare block must have same BlockSize.
Updated to NV region, work space and spare block could have different BlockSize.
3. Works space size must be <= one block size.
Update to work space size could be <= one block size (not span blocks) or > one block size (block size aligned).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16201 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15964 6f19259b-4bc3-4df7-8a09-765794883524
2. CapsuleLongModeBuffer variable should be set to Read-Only. It should not be changed by someone else.
3. Introduce a new PCD PcdIdentifyMappingPageTablePtr to share the same range of page table between AcpiS3 and Capsule.
4. Capsule stack size is allocated from PcdCapsulePeiLongModeStackSize.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15909 6f19259b-4bc3-4df7-8a09-765794883524
It changes some of the PCD declarations to add more supported PCD storage types and
the change in the PCD access methods is associated with that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15798 6f19259b-4bc3-4df7-8a09-765794883524
This library has one depex of SerialPortPpi. Then, the PEIM linked it has this depex so that it is dispatched after SerialPortPpi is installed. SerialPortPpi notifies the platform initialization done, then serial port will work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15782 6f19259b-4bc3-4df7-8a09-765794883524
PcdDiskIoDataBufferBlockNum replaced the hardcoded value into
the Disk I/O driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Tian, Feng <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15235 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Pete Batard
Jiewen Yao
Ruiyu Ni
Liming Gao
Star Zeng
Gary Li
Feng Tian
Cinnamon Shia
Dandan Bi
Hao Wu
Daocheng Bu
Eric Dong
Laszlo Ersek
Qiu Shumin
fanwang2
Jiaxin Wu
Roy Franz
Chao Zhang
Michael Kinney
Elvin Li
Daryl McDaniel
jaben carsey
Olivier Martin