After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may return EFI_INVALID_PARAMETER when a driver
does not support some parameters. This will be propagated by the reset
function and lead to UEFI failing to get the console setup.
For instance, this is the case when using the Xen console driver.
Fix it by introspecting the result and return EFI_SUCCESS when the
SetAttributes report an invalid parameter (i.e EFI_INVALID_PARAMETER).
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SerialSetAttributes is meant to match the behavior of the function
EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the UEFI spec (v2.7). This
means the function can only return:
- EFI_SUCCESS
- EFI_INVALID_PARAMETER
- EFI_DEVICE_ERROR
However the function SerialPortSetAttributes may also validly return
EFI_UNSUPPORTED. For instance this is the case of the Xen Console
driver.
EFI_UNSUPPORTED could be also interpreted as "One or more of the attributes
has an unsupported value". So return EFI_INVALID_PARAMETER in that case.
Lastly, to prevent another return slipping in the future, all the errors
but EFI_INVALID_PARAMETER and EFI_UNSUPPORTED will return
EFI_DEVICE_ERROR.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Per the UEFIv2.7 spec, EFI_DEVICE_ERROR is returned when the serial
device is not functioning correctly. Update the description to avoid
confusion.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DXE performance gauge record access functions might be reentered since
we are supporting something like USB hot-plug, which is a timer event
where gBS->ConnectController might be called and then PERF will be
called in CoreConnectSingleController.
When StartGaugeEx is being reentered, not only the gauge record might
be overwritten, more serious situation will be caused if gauge data
buffer reallocation procedure is interrupted, between line 180 and 187
in DxeCorePerformanceLib.c specifically. There, mMaxGaugeRecords will
be doubled twice (denoted as 4X), but mGaugeData only points to a
buffer of size 2X, which will probably cause the following 2X memory
to be overflowed when gauge records are increased.
So we add EFI lock with TPL_NOTIFY in StartGaugeEx/EndGaugeEx/GetGaugeEx
to avoid memory overflow and gauge data corruption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable the device
at ExitBootServices()"
This reverts commit 6fb8ddd36b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at
ExitBootServices()"
This reverts commit 76fd5a660d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Once the paging capabilities were filtered out, there might be some adjacent entries
sharing the same capabilities. It's recommended to merge those entries for the OS
compatibility purpose.
This patch makes use of existing method MergeMemoryMap() to do it. This is done by
simply turning this method from static to extern, and call it after filter code.
This patch is related to an issue described at
https://bugzilla.tianocore.org/show_bug.cgi?id=753
This patch is also passed test of booting follow OSs:
Windows 10
Windows Server 2016
Fedora 26
Fedora 25
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Under the following scenario:
- no UEFI bootable application available anywhere in the system,
- ... not even for the default platform recovery option,
- no shell is built into the firmware image,
- but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with:
DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n"));
CpuDeadLoop ();
while the user sits at the TianoCore logo page, wondering what's going on.
Print an informative message to the console, wait for a keypress, and then
return to the Boot Manager Menu forever.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some OSs will treat EFI_MEMORY_DESCRIPTOR.Attribute as really
set attributes and change memory paging attribute accordingly.
But current EFI_MEMORY_DESCRIPTOR.Attribute is assigned by
value from Capabilities in GCD memory map. This might cause
boot problems. Clearing all paging related capabilities can
workaround it. The code added in this patch is supposed to
be removed once the usage of EFI_MEMORY_DESCRIPTOR.Attribute
is clarified in UEFI spec and adopted by both EDK-II Core and
all supported OSs.
Laszlo did a thorough test on OVMF emulated platform. The details
can be found at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the method DumpGuardedMemoryBitmap() and SetAllGuardPages(), the code
didn't check if the global mMapLevel is legal value or not, which leaves
a logic hole causing potential array overflow in code followed.
This patch adds sanity check before any array reference in those methods.
Cc: Wu Hao <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
The coding style requires that header files must be also added in module's inf
file, as long as they're included by c files. This patch will fix this issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Update the UhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch is following 2c656af04d.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 5db417ed25.
"MdeModulePkg/PciBusDxe: Enable Bus Master on P2P bridges on demand"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 050763db07.
"MdeModulePkg/PciBus: Disable BME of all devices when entering RT"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
EfiBootManagerStartHotkeyService() asserts when "BootOptionSupport"
variable doesn't exist.
In fact, though "BootOptionSupport" variable is set in BdsDxe
module, it's possible that the variable is deleted by
PlatformBootManagerBeforeConsole().
The patch removes the assertion and adds code to handle the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
If a USB Mass Storage device does not support the Get
Max LUN command, then the USB I/O Protocol ControlTransfer()
service may return an error. If an error is returned for
this command, then assume that the device does not support
multiple LUNs and return a maximum LUN value of 0.
The USB Mass Storage Class Specification states that a
maximum LUN value larger than 0x0F is invalid. Add
a check to make sure this maximum LUN value is in this
valid range, and if it is not, then assume that the
device does not support multiple LUNs and return a
maximum LUN value of 0.
This change improves compatibility with USB FLASH drives
that do not support the Get Max LUN command or return
an invalid maximum LUN value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
The USB I/O Protocol function ControlTransfer() has a DataLength
parameter that specifies the size of the Data buffer. The
UsbBusDxe module implements the USB I/O Protocol using the
services of the USB2 Host Controller Protocol. The DataLength
parameter in the USB2 Host Controller Protocol ControlTransfer()
service is an IN OUT parameter so the number of bytes actually
transferred is returned. Since the USB I/O Protocol
ControlTransfer() service can not return the number of bytes
actually transferred, the only option if the number of bytes
actually transferred is less than the number of bytes requested
is to return EFI_DEVICE_ERROR.
The change fixes an issue with a USB mass storage device that
responds with 0 bytes to the Get MAX LUN command.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The build error is introduced by following check in:
2930ef9809235a4490c8
The Visual Studio older than 2015 doesn't support constant integer
in binary format (0bxxx). This patch changes them to BIT macro to
fix it. This patch also cleans up coding style about unmatched
comment for return value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Following check-in caused this issue:
2930ef9809
This issue is caused by assigning incorrect value to PoolHdr.Size
if the requested size is more than MAX_POOL_SIZE, because the SMM
core will actually allocate page memory instead of pool memory in
this situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Wu Hao <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
Tested-by: Wu Hao <hao.a.wu@intel.com>
In function FindFileEntry():
Instead of using the function parameter 'FileEntry', use a local
variable to store the buffer allocated for disk read operation.
For the below calling stack:
UdfOpenVolume() -> FindRootDirectory() -> FindFileEntry()
In FindFileEntry(), the call to 'DiskIo->ReadDisk()' is possible (e.g.
media change for a CD/DVD ROM device) to trigger a re-install of the
BlockIO(2) protocol which will further lead to a call of the BindingStop()
& BingdingStart() of the UdfDxe driver.
Meanwhile, for the above listed calling stack, the '**FileEntry'
parameter passed into FindFileEntry() is '&PrivFsData->Root'. 'PrivFsData'
is a driver-managed private data, it will be freed in BindingStop() and
re-allocate in BingdingStart().
In such case, if '*FileEntry' is used to store the allocated buffer, the
information will be lost if 'DiskIo->ReadDisk()' triggers a re-install of
the BlockIO(2) protocol. The subsequent call of the FreePool API:
FreePool (*FileEntry);
will cause issues.
This commit uses a local variable to store the allocated buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
In order to create all of the children (El Torito standard and UDF) for
a CD/DVD media in an entry of the PartitionDriverBindingStart(), this
commit merges the discovery of the El Torito feature
(PartitionInstallElToritoChildHandles) into function
PartitionInstallUdfChildHandles.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=782
Update the Request Sense check for the Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION. For this Sense Key, the
Additional Sense Key to EFI_STATUS mappings are:
USB_BOOT_ASC_MEDIA_CHANGE -> EFI_MEDIA_CHANGE
USB_BOOT_ASC_NOT_READY -> EFI_NOT_READY
USB_BOOT_ASC_NO_MEDIA -> EFI_NOT_READY
All others -> EFI_DEVICE_ERROR
A USB flash drive is returning Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION and an Additional Sense Key of
USB_BOOT_ASC_NO_MEDIA for a few seconds before returning an
Additional Sense Key of USB_BOOT_ASC_MEDIA_CHANGE.
The current logic treats this initial Request Sense info as an
error and reties the command 5 times before failing completely.
With this change the USB Flash Drive works correctly.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the SdBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EmmcBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2 changes:
Resource cleanup logic update in UfsEndOfPei().
V1 history:
Update the UfsBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Call IoMmuInit() after locating gPeiUsbControllerPpiGuid.
2. Call XhcPeiFreeSched() to do cleanup in XhcEndOfPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V2: Halt HC at EndOfPei.
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
This feature is controlled by three PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
BIT2 and BIT3 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for SMM page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiRuntimeServicesCode
and EfiRuntimeServicesData by setting the PCD with value 0x60.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
This feature is controlled by three PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
BIT0 and BIT1 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiBootServicesData
and EfiRuntimeServicesData by setting the PCD with value 0x50.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Note1: Turning on heap guard, especially pool guard, will introduce too many
memory fragments. Windows 10 has a limitation in its boot loader, which
accepts at most 512 memory descriptors passed from BIOS. This will prevent
Windows 10 from booting if heap guard is enabled. The latest Linux
distribution with grub boot loader has no such issue. Normally it's not
recommended to enable this feature in production build of BIOS.
Note2: Don't enable this feature for NT32 emulation platform which doesn't
support paging.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Heap guard feature needs paging to work properly. 64-bit BIOS uses
PcdDxeIplBuildPageTables to control the page table setup. 32-bit BIOS
has to check heap guard feature to decide enabling paging or not.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The new protocol gEdkiiSmmMemoryAttributeProtocolGuid is intended for
PiSmmCore to be able to change memory page attributes for the sake of
heap guard feature.
This protocol provides three interfaces to get/set/clear page attribute.
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add definitions and strings for following new PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This patch is to remove some redundant DEBUG output in SNP transmit function.
In case of return EFI_NOT_READY in PxeTransmit, the SNP driver is indicate
the caller that the transmit queue is full, it's a very common situation druing
transmit, not a critical error. So the patch move the DEBUG lever to EFI_D_NET.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=725
Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.
That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.
Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.
With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:
"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."
Implies that the last recorded block is the one where second AVDP was
recorded.
This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=766
Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:
http://www.usb.org/developers/docs/devclass_docs/usb_msc_boot_1.0.pdf
The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=765
The UEFI Specification Boot Services chapter, StartImage() service,
EFF 1.10 Extension requires extra calls to ConnectController()
if a UEFI Driver produces handles. The DXE Core is performing these
extra calls to ConnectController() without evaluating the ImageType.
A filter is added to not make extra calls to ConnectController()
if the ImageType is EFI_IMAGE_SUBSYSTEM_EFI_APPLICATION.
Without this filter, extra calls to ConnectController() may be
performed by UEFI Applications or a UEFI Shell Applications that
also call ConnectController().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=761
When a TerminalType is set to PCANSI, characters in the range 0x00
to 0x1F are control characters. The mapping table for PCANSI maps
TRIANGLE glyphs, ARROW_UP glyph, and ARROW_DOWN glyph into this
control character range and that causes no characters to be
displayed by PCANSI compatible terminal emulators.
The mappings are updated so these glyphs are mapped to ANSI
characters in the range 0x20 to 0x7E.
GEOMETRICSHAPE_UP_TRIANGLE '^'
GEOMETRICSHAPE_RIGHT_TRIANGLE '>'
GEOMETRICSHAPE_DOWN_TRIANGLE 'v'
GEOMETRICSHAPE_LEFT_TRIANGLE '<'
ARROW_UP '^'
ARROW_DOWN 'v'
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.
This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit. Consequently, only two
possible addresses may result:
{<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2). In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-October/016479.html
reported "Xen Console input very slow in recent UEFI" that appears
after 4cf3f37c87 "MdeModulePkg
SerialDxe: Process timeout consistently in SerialRead".
Julien did more debugging and find out the following is happening in
TerminalConInTimerHandler (MdeModulePkg/Universal/Console/TerminalDxe)
when a character is received:
1) GetControl will return EFI_SERIAL_INPUT_BUFFER_EMPTY unset
=> Entering in the loop to fetch character from the serial
2) GetOneKeyFromSerial()
=> Return directly with the character read
3) Looping as the fifo is not full and no error
4) GetOneKeyFromSerial() -> SerialRead()
=> No more character so SerialPortPoll() will return FALSE and loop
until timeout
=> Return EFI_TIMEOUT
5) Exiting the loop from TerminalConInTimerHandler
6) Characters are printed
After some investigation, I found it is related to the Timeout value.
The Timeout is 1000000 (1s) by default to follow UEFI spec.
And the Terminal driver will recalculate and set the Timeout value
based on the properties of UART in TerminalDriverBindingStart()/
TerminalConInTimerHandler().
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
//
// According to BAUD rate to calculate the timeout value.
//
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) *
2 * 1000000 / (UINTN) Mode->BaudRate;
}
For example, based on the PCD values of PcdUartDefaultBaudRate,
PcdUartDefaultDataBits and PcdUartDefaultStopBits, SerialInTimeOut =
(1 + 8 + 1) * 2 * 1000000 / (UINTN) 115200 = 173 (us).
When SerialDxe is used,
TerminalDriverBindingStart()/TerminalConInTimerHandler() ->
SerialIo->SetAttributes() ->
SerialSetAttributes() ->
SerialPortSetAttributes()
Some implementations of SerialPortSetAttributes() could handle the
input parameters and return RETURN_SUCCESS, for example
BaseSerialPortLib16550, then Timeout value will be changed to 173 (us),
no "slow down" will be observed.
But some implementations of SerialPortSetAttributes() just return
RETURN_UNSUPPORTED, for example XenConsoleSerialPortLib, then Timeout
value will be not changed and kept 1000000 (1s), "slow down" will be
observed.
SerialPortLib instance can be enhanced to
1. Handle the input parameters and return status accordingly instead of
just returning RETURN_UNSUPPORTED in SerialPortSetAttributes().
2. Just return RETURN_SUCCESS instead of RETURN_UNSUPPORTED in
SerialPortSetAttributes() if the instance does not care the input
parameters at all.
And SerialDxe can also be enhanced like this patch to be more robust
to handle Timeout change.
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Compare against the original parameters
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
For PciIoPciRead interface, memory prior to Buffer would be written
with zeros if Offset was larger than sizeof (Dev->ConfigSpace), which
would cause serious system exception.
So we add a pre-check branch to avoid memory override.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The patch ensures all DMA transactions are blocked after
ExitBootService.
If a platform enables IOMMU before and needs disable IOMMU after
ExitBootService, the IOMMU should be disabled after PCI bus driver
disables BME.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
V3:
(1) Reset QuestionStoredInBitField to FALSE at end opcode(EFI_IFR_END_OP)
(2) Fix typo and format issues(line alignment for debug print message
and value assignment...)
V2:
(1)Remove the VarOffsetBitLevel/StorageWidthBitLevel to reduce the final
VarCheckBinSize and update the implementation accordingly.
(2)Update the VAR_CHECK_HII_REVISION
(3)Refine the Debug message and function comments,like update oneof",
"checkbox", "numeric" to "OneOf", "CheckBox", "Numeric".
VarCheckHiiLib check the value set to storage based on the possible value
listed in the vfr file. Since we have enhanced vfr to support Question
value stored in bit field, so now enhance VarCheckHiiLib to support bit
field check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In patch 2, we will introduce DEBUG_INFO in VarCheckHiiLib,in order to keep
consistence, replace all EFI_D_INFO with DEBUG_INFO firstly in this pacth.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Julien Grall
Heyi Guo
Ruiyu Ni
Jian J Wang
Laszlo Ersek
Star Zeng
Michael D Kinney
Hao Wu
Fu Siyuan
Paulo Alcantara
Song, BinX
Dandan Bi