This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in FatPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in FatPei and CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
SerialPortInitialize() set the BaudRate variable (type UINT64) as:
BaudRate = (UINTN)FixedPcdGet64 (PcdUartDefaultBaudRate);
This commit fixes a potential problem on ARM 32-bit builds, where the
UINTN type is defined as UINT32, by removing the cast:
BaudRate = FixedPcdGet64 (PcdUartDefaultBaudRate);
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Correct some obviously incorrect comments that have invalid details for
the returned values. (Copy /Paste problem?)
There are no functional changes in this commit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change updates PL011UartInitializePort to compare ReceiveFifoDepth
with the correct hardware FIFO size instead of the constant 32 used
previously.
This corrects a minor bug where a request for a fifo size > 15 and < 32
would not have been honoured on a system with a 16 byte FIFO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clear bits [31:24] after reading ACPI timer count by IoRead32(), and also add
comments "Note: The implementation uses the lower 24-bits of the ACPI timer
and is compatible with both 24-bit and 32-bit ACPI timers." in INF.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In GetInfo interface, current code copy real file name buffer
with full path file length. It should use real file name
length. This patch fix this error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
From PI spec vol2:
Prior to invoking any UEFI drivers, applications, or connecting consoles,
the platform should signal the event EFI_END_OF_DXE_EVENT_GUID
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Remove the variable which is set but not used to pass GCC build.
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
The return value of GetImageIdOrAddress() could be NULL if the
ImageId is invalid. The patch fixes the bug to return EFI_NOT_FOUND
when GetImageIdOrAddress() returns NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The type of variable "SmallestIdFromFlag" should be BOOLEAN,
this patch fix the incorrect type.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current PeiCdExpress driver will return capsule size to
be block aligned.
It will fail if we check the capsuleImageSize field.
The patch correct the returned capsule size.
Tested-by: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Correct the typos in some header files of MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Correct the typos in some files of MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Remove the RecoveryOemHookLib class and instance that is no
longer used by any modules.
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=138
Add the ForceRecovery UEFI application to the Quark.dsc file
so this application can be put onto an SD card or USB drive
to test the Galileo firmware recovery feature.
The library mappings to the RecoveryOemHookLib are also
removed becuse this library is not longer used by any modules.
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Remove the library function PlatformDebugPortGetChar8() from the
PlatformHelperLib that is no longer used by any modules.
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=137https://bugzilla.tianocore.org/show_bug.cgi?id=139
There are four supported methods to generate a boot mode of
BOOT_IN_RECOVERY_MODE on the Galileo platforms:
* Detect a corrupt FV
* Detect a forced recovery from the ForceRecovery UEFI application
that sets a bit in a sticky R/W register
* The RESET button for the Arduino shield is held while the system
is powered up
* The RESET button for the Arduino shield is held while the system
is rebooted using the REBOOT button.
The logic in the PlatformInit module is cleaned up and updated to
support all three of the recovery detection methods. The clean
ups include:
* Remove extra debug messages
* Remove user input from serial port
In addition, once one of the recovery methods is detected and a
boot mode of BOOT_IN_RECOVERY_MODE is set, the Galileo platforms
would get an error attempting to use the USB host controller to
detect and read a recovery image from a USB drive. The issue is
the IMR protection registers are programmed to prevent DMA to
memory owned by the PEI Core. The IMR register programming is
updated to allow DMA to memory that is allocated by the recovery
modules using the PEI AllocatePages() service.
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=138
This UEFI Application sets a sticky bit that persists across reset
to force a boot mode of BOOT_IN_RECOVERY_MODE. It then performs
a warm reset using the UEFI Runtime Service ResetSystem().
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Update Quark North Cluster SMM dispatcher logic to handle
case where an SMI handler unregisters itself.
https://bugzilla.tianocore.org/show_bug.cgi?id=51
This issue was reproduced using the unit test at:
https://github.com/mdkinney/edk2/tree/Bug51/Reproduce
An ASSERT() is generated the 4th time the periodic SMI
handler is triggered when the periodic SMI handler
unregisters itself. After applying this patch, the
DEBUG() message from the periodic SMI handler in this
unit test is generated 4 times, the periodic SMI handler
is unregistered, and the UEFI Shell works as expected.
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=136
1) Add CallbackContext field to the DATABASE_RECORD structure that
is set to the RegisterContent value passed to QNCSmmCoreRegister().
This is the content that must be passed to the SMI handler when
its source is triggered.
2) Update usage of ChildContext field in the DATABASE_RECOD to use
CopyMem() instead of structure assignments to avoid compiler
use of memcpy() intrinsics
This issue was reproduced using the unit test at:
https://github.com/mdkinney/edk2/tree/Bug51/Reproduce
An ASSERT() is generated the first time the periodic SMI
handler is triggered. After applying this patch, the
DEBUG() messages from the periodic SMI handler in this
unit test are generated.
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
In ShellOpenFileByName() the file is opened using
gEfiShellProtocol->OpenFileByName().
It is supposed that if this call returns an EFI_ERROR, the function
should return that error immediately. However, this return was missing,
and if UnicodeCollationProtocol has not been located by this time, the
Status gets overwritten with LocateProtocol() call result, which
eventually erroneously returns EFI_SUCCESS to the Shell.c, and this
leads to attempt to execute a non-existent startup script, which fails,
and which in turn leads to Shell being unloaded with "Invalid parameter"
error. This patch fixes the bug.
Cc: Tapan Shah <tapandshah@hpe.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Updated IgdOpregion.h to align with latest specification
https://01.org/sites/default/files/documentation/skl_opregion_rev0p5.pdf
1) Updated Mailbox structures to align with latest spec
2) Added Mailbox 5 structure
3) Added defines for Signature and Mailbox support
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
The current SplitFspBin.py can only support TE image format
rebasing in an FSP binary. This patch adds PE32 image format
rebasing support.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Satya Yarlagadda <Satya.p.yarlagadda@intel.com>
The HDiskImageSave() function copies a device path using
DuplicateDevicePath() and passes that device path to
gBS->LocateDevicePath() that changes the value of the
device path pointer. When FreePool() is called with the
modified device path pointer, the FreePool() service
generates an ASSERT() because the signature for the pool
head can not be found.
The function HDiskImageRead() immediately above
HDiskImageSave() has the correct algorithm that uses an
additional local variable called DupDevicePathForFree to
preserve the pointer to the allocated buffer so it can
be used in the call to FreePool().
Bug: <https://bugzilla.tianocore.org/show_bug.cgi?id=131>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Update CRC32 in the EFI System Table header after shell changes the
value of gST->ConsoleOutHandle and gST->ConOut
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-By: Tapan Shah <tapandshah@hpe.com>
Reviewed-By: Jaben Carsey <Jaben.carsey@intel.com>
Ruiyu Ni
Jiewen Yao
Yonghong Zhu
Alexei
Evan Lloyd
Star Zeng
Dong, Eric
Zhang, Chao B
Cinnamon Shia
Zhang Lubo
Bi, Dandan
Chen A Chen
Liming Gao
Thomas Huth
Michael Kinney
Vladimir Olovyannikov
Giri P Mudusuru
Maurice Ma
Tapan Shah