https://bugzilla.tianocore.org/show_bug.cgi?id=201
In V3, Use Odt to replace ODT, Cke to replace CKE, Id to replace ID,
and Cl to replace CL in structure field name.
In V2, separate DDR3, DDR4 and LPDDR definition into the different files;
use the different SPD prefix as structure definitions for each SPD type.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
AP will get target C-State from eax[7:4]. We do shift in ebx firstly before set
to eax. It will lead ebx is incorrect in the next time.
The fix is to set ebx to eax firstly and does shift in eax. Thus, ebx could keep
original value.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Add one semaphore to make sure BSP to wait till all APs run in AP safe loop
code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
For long mode DXE, we will disable paging on AP to protected mode to execute AP
safe loop code in reserved memory range under 4GB. But we forget to allocate
stack for AP under 4GB and AP still are using original AP stack. If original AP
stack is larger than 4GB, it cannot be used after AP is transferred to protected
mode. Besides MwaitSupport == TRUE, AP stack is still required during phase of
disabling paging in long mode DXE.
Moreover, even though AP stack is always under 4GB (a) in Ia32 DXE and (b) with
this patch, after transferring to protected mode from X64 DXE, AP stack
(in BootServiceData) maybe crashed by OS after Exit Boot Service event.
This fix is to allocate reserved memory range under 4GB together with AP safe
loop code. APs will switch to new stack in safe loop code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
AP loop function is already saved into global variable, needn't to get it from
AP function parameter.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
The number of memory map entries used exceeded the allocated count,
thereby causing memory corruption.
Fixed the number of Virtual Memory Map Descriptors allocated in
describing the RTSM Memory Map. Also added an assert to confirm
that the descriptor count has not been exceeded, in the hope that it may
help highlight the problem should a new entry be added.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change is purely cosmetic, with no functional impact, and only
exists to isolate cosmetic changes from a functional fix.
Some indentation is adjusted.
Overlength lines are re-flowed.
alignment on = is adjusted as some lines exceeded 80 columns.
if statement converted to conditional assignment.
Redundant re-calculation of CacheAttributes removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The LinuxLoader application boots Linux in a way that prevents the OS
from accessing UEFI runtime services. Since we have better ways now
of invoking the kernel (via GRUB, or directly via the kernel's UEFI
stub), remove the obsolete LinuxLoader so that people will no longer
mistake it for a suitable reference of how to invoke the OS from UEFI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
The LinuxLoader should no longer be used now that both the ARM and arm64
kernels as well as GRUB have full support for acting as an OS loader in
the UEFI spec sense. So remove it from the Beagle build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
When booting the kernel via Fastboot, invoke the kernel image directly
rather than passing it to the LinuxLoader app. This requires the kernel
image to be built with UEFI stub support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Current code is using L'\0' to compare with a ASCII char.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function EdbLoadCodBySymbolByIec(), AsciiStrGetNewTokenField() at line
1589 will return NULL if the first character in 'LineBuffer' is '\0'. But
the previous if statement at line 1576 ensures the above case will not
happen.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function DebuggerDisplaySymbolAccrodingToAddress(), when variable
'CandidateAddress' (returned by EbdFindSymbolAddress function) equals
(UINTN) -1, it also indicates that the symbol is not found at the given
address.
This commit adds this missing check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add checks for the return value of function Atoi() in EdbCmdBreakpoint.c.
If the input parameter 'CommandArg' contains non-digit character, print
corresponding error message.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Operands in a bitwise operation should have the same size to eliminate
unexpected results.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In current DriverSampleDxe, the sample code of password is
not a good example, so we plan to remove it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current SetupBrowser, the logic related to non-interative password
is not correct. How to support it correctly or whether support it
is still under investigation. First step remove the incorrect logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when the password is not supported, pop up a dialogue
to let user know the reason.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Make use of DMA to transfer multiple blocks at one time. It could
improve the performance on MMC/SD driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add the interface to change the bus width and speed.
By default, MMC is initialized with 1-bit mode and less than 400KHz bus
clock. It causes MMC working inefficiently.
Set I/O bus width on both MMC controller and EXTCSD. Otherwise, it may
cause unmatched failure case. And support more timing mode, high speed,
HS200 & HS400 mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When CMD6 & ACMD51 are added into identifying SD process, PL180
should also support CMD6 & ACMD51. Otherwise, it will hang when
system tries to read expected data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Add new protocol methods to change the bus width, speed and check
for multiblock support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Split off protocol changes from implementation changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to AHCI Spec 1.3 GHC.AE bit description:
"The implementation of this bit is dependent upon the value of the
CAP.SAM bit. If CAP.SAM is '0', then GHC.AE shall be read-write and shall
have a reset value of '0'. If CAP.SAM is '1', then AE shall be read-only
and shall have a reset value of '1'."
Being in AhciMode, for proper operation it is required, that GHC.AE bit
is always set, before any other AHCI registers are written to. Current
AhciMode implementation, both in AhciReset() and AhciModeInitialization()
functions, set GHC.AE bit only depending on 'CAP.SAM == 0' condition,
assuming (according to the AHCI spec), that otherwise it has to be set
anyway. It may however happen, that even if 'CAP.SAM == 1', GHC.AE
requires updating by software.
This patch enables in AhciMode setting GHC.AE in case its initial value
is '0'. It fixes AHCI support for Marvell Armada 70x0 and 80x0 SoC
families. The change is transparent to all other platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use FspSiliconInitDone2 API in Notify Phase
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Richard Thomaiyar <richard.marian.thomaiyar@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We send ADDRESS DEVICE CMD in XhcInitializeDeviceSlot(), which will
cause XHC issue a USB SET_ADDRESS request to the USB Device.
According to USB spec, there should have a 10ms delay before this
operation after resetting a given port.
But in original code, there is a possible path which may have no such
10ms delay:
UsbHubResetPort()->UsbHubSetPortFeature()->Stall(20)->UsbHubGetPortSt
atus()->XhcPollPortStatusChange()->(if RESET_C bit is set)->
XhcInitializeDeviceSlot()->(if RESET_C bit is set)->Stall(10)
So this patch is used to fix above issue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Tested-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch fixes the first part of
https://bugzilla.tianocore.org/show_bug.cgi?id=242
Previously, when SMM exception happens, "stack overflow" is misreported.
This patch checked the PF address to see it is stack overflow, or
it is caused by SMM page protection.
It dumps exception data, PF address and the module trigger the issue.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
According to the Intel SDM (325462-060US / September 2016),
> INPUT EAX = 0BH: Returns Extended Topology Information
>
> [...] Software must detect the presence of CPUID leaf 0BH by verifying
> (a) the highest leaf index supported by CPUID is >= 0BH, and
> (b) CPUID.0BH:EBX[15:0] reports a non-zero value. [...]
The "GetApicId" sections in the Ia32 and X64 "MpFuncs.nasm" files do not
perform check (b).
This causes an actual bug in the following OVMF setup:
- Intel W3550 host processor <http://ark.intel.com/products/39720/>,
- the QEMU/KVM guest's VCPU model is set to "host", that is, "the CPU
visible to the guest should be exactly the same as the host CPU".
Under "GetApicId", check (a) passes: the CPUID level of the W3550 is
exactly 11 decimal. However, leaf 11 itself is not supported, therefore
EDX is set to zero:
> If a value entered for CPUID.EAX is less than or equal to the maximum
> input value and the leaf is not supported on that processor then 0 is
> returned in all the registers.
Because we don't check (b), the "GetProcessorNumber" section of the code
is reached with an initial APIC ID of 0 in EDX on all of the APs. Given
that "GetProcessorNumber" searches the
"MP_CPU_EXCHANGE_INFO.CpuInfo[*].InitialApicId" fields for a match, all
APs enter ApWakeupFunction() with an identical "NumApsExecuting"
parameter. This results in unpredictable guest behavior (crashes, reboots,
hangs etc).
Reorganize the "GetApicId" section and add the missing check in both
assembly files.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
According to the Intel SDM (325462-060US / September 2016),
> INPUT EAX = 0BH: Returns Extended Topology Information
>
> [...] Software must detect the presence of CPUID leaf 0BH by verifying
> (a) the highest leaf index supported by CPUID is >= 0BH, and
> (b) CPUID.0BH:EBX[15:0] reports a non-zero value. [...]
The LocalApicLib instances in UefiCpuPkg do not perform check (b).
This causes an actual bug in the following OVMF setup:
- Intel W3550 host processor <http://ark.intel.com/products/39720/>,
- the QEMU/KVM guest's VCPU model is set to "host", that is, "the CPU
visible to the guest should be exactly the same as the host CPU".
In the GetInitialApicId() function, check (a) passes: the CPUID level of
the W3550 is exactly 11 decimal. However, leaf 11 itself is not supported,
therefore EDX is set to zero:
> If a value entered for CPUID.EAX is less than or equal to the maximum
> input value and the leaf is not supported on that processor then 0 is
> returned in all the registers.
Because we don't check (b), we return 0 as initial APIC ID on the BSP and
on all of the APs as well.
Add the missing check.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
New solution for this issue will be provided.
This reverts commits from d1947ce509
to bda034c34d.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
This patch is used to allow the IPv4 with prefix case.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch update the shell ping command to use timer service to calculate the
RTT time, instead of using the timer arch protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Add error check for the same Guid/Protocol/PPIs/Includes defined as both
Private and non-Private attribute.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=209
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VM related defs are now in EbcVmTest.h, and opocode related definitions in
Ebc.h.
Because it is used by both the EBC Debugger and driver,
EbcDebugSignalException() sees its definition factorized in
EbcDebuggerHook.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* This patch introduces EbcDebuggerHook.c/h and inserts the required
EBCDebugger references into the existing EBC source files.
* With all the hooks defined to their empty version in EbcDebuggerHook.c
the existing EBC VM behaviour is left unaffected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When returning selectable menu, should return the menu in current form,
the codes miss to do the check. Now returning the selectable menu behind
the codes "if ((UINTN) Distance + NextMenuOption->Skip > GapToTop)".
Then can cover the check, can return the menu correctly.
https://bugzilla.tianocore.org/show_bug.cgi?id=232
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The logic in functions ReadAndMeasureVariable() and MeasureVariable()
within Tcg2Dxe ensure that 'VarData' will not be NULL before calling
TcgDxeHashLogExtendEvent() at line 1716.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Add ASSERT to make sure 'ByteSeq' is not NULL before comsumed by
CopyMem().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Function GetVariable2() ensures its third (output) parameter will not be
NULL when the return status is EFI_SUCCESS.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Move the declaration of these PCDs from the
[PcdsFixedAtBuild, PcdsPatchableInModule]
section of "UefiCpuPkg/UefiCpuPkg.dec" to the
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
section. Their types, default values, and token values remain unchanged.
Only UefiCpuPkg/PiSmmCpuDxeSmm consumes these PCDs, specifically on the
call stack of its entry point function, and it turns them into static or
dynamically allocated data in SMRAM:
PiCpuSmmEntry() [PiSmmCpuDxeSmm.c]
InitializeSmmTimer() [SyncTimer.c]
PcdCpuSmmApSyncTimeout
-> mTimeoutTicker
InitializeMpServiceData() [MpService.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
However, there's another call path to fetching "PcdCpuSmmSyncMode", namely
SmmInitHandler() [PiSmmCpuDxeSmm.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
and this path is exercised during S3 resume (as stated by the comment in
SmmInitHandler() too, "Initialize private data during S3 resume").
While we can call the PCD protocol (via PcdLib) for fetching dynamic PCDs
in the entry point function, we cannot do that at S3 resume. Therefore
pre-fetch PcdCpuSmmSyncMode into a new global variable (which lives in
SMRAM) in InitializeMpServiceData(), just before calling
InitializeMpSyncData(). This way InitializeMpSyncData() can retrieve the
stashed PCD value from SMRAM, regardless of the boot mode.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
gSmmCorePrivate->CommunicationBuffer and gSmmCorePrivate->BufferSize locate at
runtime memory region. That means they could be modified by non-SMM code during
runtime.
We should cache them into SMM local variables before we verify them. After
verification, we should use the cached ones directly instead of the ones in
gSmmCorePrivate.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Change callback handler type to avoid saving PSID info in
browser temp buffer. Also clean the buffer after using it.
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Liming Gao
Jiaxin Wu
Jeff Fan
Sami Mujawar
Evan Lloyd
Ard Biesheuvel
Hao Wu
Dandan Bi
Haojian Zhuang
Marcin Wojtas
Konrad Rzeszutek Wilk
Thomaiyar, Richard Marian
Feng Tian
Jiewen Yao
Laszlo Ersek
Star Zeng
Eric Dong
Zhang Lubo
Yonghong Zhu
Pete Batard