For Pyrite SSC device, it may not supports Active Key, So
add check logic before enable it.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch is used to cleanup unused structure
definition.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
The BlockSid feature is not depend on lock status,
so move the send BlockSid command out of unlock process.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
BlockSid feature can be retrieve from the header info.
Update the logic, check BlockSid capability before use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Not all opal device support BlockSid feature. So Add
code logic to check the capability before send BlockSid
command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The BlockSid feature is a global level feature instead
of device level feature. So move the menu from device page
to the main page.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Check the BlockSid feature capability through check
BlockSid header in the DiscoveryHeader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The ComId for Block SID authentication command is
0x0005 according to "TCG Storage Feature Set: Block
SID Authentication Specification Version 1.0.0". Update code to
follow this spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Disable SecureBoot Enable/Disable feature when PhysicalPresence is not available,
Since SecureBootEnable is protected with PhysicalPresence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Change design to always install opal menu.
Current implementation only install menu when device connect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Remove SecureBoot UI support for Customized SecureBoot Mode transition according to Mantis 1263.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 96832eefea
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Remove Customized SecureBoot Mode transition logic for Mantis 1263, including AuditMode/DeployedMode/PK update management.
Also remove image verification logic in AuditMode.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 4fc08e8d68
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Remove gEdkiiSecureBootModeGuid definition for Customized Secure Boot feature defined in
UEFI2.5 Mantis 1263. It is a private variable GUID.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: af9af05bec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Update the TCG Spec in the the EFI_TCG_SERVER_ACPI_TABLE from TCG 1.0 to
TCG 1.2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reduce several DEBUG messages verbosity from INFO to VERBOSE, so that will not see debug message around each driver loading when TPM 2.0 part present.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Fix Tpm12NvWriteValue() command/response length byte order.
Tpm12SubmitCommand() was using the value from Command.Hdr.paramSize
which was swapped to be Big Endian, but the function was
expecting it in UINT32 Little Endian
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add DEBUG messages for TPM12Startup to distinguish between TPM_SUCCESS
and
TPM_INVALID_POSTINIT. This helps debugging some hardware problems.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add DEBUG messages for TPM2Startup to distinguish between TPM_RC_SUCCESS
and TPM_RC_INITIALIZE. This helps debugging some hardware problems.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
This patch enhance OPAL password SMM driver to check SMM bar is valid MMIO
besides outside of SMRAM.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance OPAL password lib SMM communication by using fixed
SMM communication buffer.
Update OPAL password lib to consume EDKII_PI_SMM_COMMUNICATION_REGION_TABLE
as fixed communication buffer for SMM communication.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In image verification, if image verified pass in DBT, still need to verify if it is blocked by any other cert/cert hash from DBX.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Dick Wilkins <dick_wilkins@phoenix.com>
Revert previous fix in AuthVariable driver init which breaks SecureBootEnable original behavior. Add more error handling logic in SecureBootConfigDxe to prevent wrong display info when SecureBootEnable & PK inconsistency happens.
Commit hash for the reverted patch in AuthVariable driver is
SHA-1: a6811666b0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According to current Pyrite SSC Spec 1.00, there is no parameter
for RevertSP method. So suppress KeepUserData option for the
Pyrite Ssc type device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Check the pointer before use it to make the code more safely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
TempBuf in SetupEventLog needs to include sizeof(UINT32) to hold NumberOfAlgorithms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
This driver used to unlock device in S3 resume phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This driver used to enables opal feature in bios.
It adds setup menu and unlock device process in boot phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
APIs used to support opal password solution to trig opal command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Library APIs used to create commands defined by TCG storage opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
APIs used to create commands defined by TCG storage core spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The type casting in the ChooseFile is not necessary and it actually
hid the incompatible handlers from the compiler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The SecureBootConfig now uses ChooseFile() from FileExplorerLib
to select the certificates to be enrolled into PK, KEK, DB, DBX,
or DBT, and the corresponding handlers to get the content of the
file. Per the definition of CHOOSE_HANDLER, the handler must use
EFIAPI as the calling convention. However, the calling convention
was not specified the following handlers: UpdatePKFromFile(),
UpdateKEKFromFile(), UpdateDBFromFile(), UpdateDBXFromFile(), and
UpdateDBTFromFile(). When compiling the firmware with gcc, the
default calling convention is not compatible with EFIAPI, so the
handlers interpreted the argument the wrong way and passed the
wrong device path to UpdatePage(), and the system crashed when
the user tried to enroll a certificate into the key database.
This commit specifies the calling convention for those functions
so that gcc can generate the right code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Some commands in DxeTcg2PhysicalPresenceLib accept
AuthSession as input parameter and copy to local
command buffer. After use, this AuthSession content
should be zeroed, because there might be some secrete
there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Tpm2Ptp.c is library, but it miss Tpm2 prefix for
IsPtpPresence() and GetPtpInterface(). There might
be risk as name symbol conflict. This patch adds Tpm2
prefix for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Tested-by: "Wu, Hao A" <hao.a.wu@intel.com>
Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction()
has check if current request is same as previous.
But it forget check RequestParameter, which causes
second request fail to process, if RequestParameter
is different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
The function AllocateCopyPool may return NULL, so need to do check
after calling it. This patch is to enhance the related logic.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Using existing library FileExplorerLib to replace the same
logic in SecureBootConfigDxe to make the code clear. After using
FileExplorerLib, the UI behavior for enroll PK will change,
previously when select one PK file, commit/discard changes will
return to Device Manager,press ESC will return to FileExplorer.
Now using FileExplorerLib the behavior will keep same with
enroll KEK/DB/..., commit/discard changes will return to Custom
Secure Boot Options form and ESC will return to PK options form.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
TPM state string update requires HiiHandle which may not be initialized when calling ExtractConfig.
Move this logic to CallBack function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Add a new cert data base "certdbv" to store signer certs for volatile time based
Auth variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19786 6f19259b-4bc3-4df7-8a09-765794883524
1) NvPublic.dataSize data should be got from original
receive buffer, instead of returned NvPublic.
2) NvNameSize means the size of NvName without size field.
The original code treats it to be size of NvName with size
field, so the last 2 bytes are missing.
This patch fixed problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19756 6f19259b-4bc3-4df7-8a09-765794883524
Previously, we only add PTP detection in Tpm12RequestUseTpm,
because RequestUseTpm does not check TPM command.
This patch also adds similar check in Tpm12SubmitCommand.
PTP device does not accept TPM12 command, so that it can
return error on PTP device, instead of wait till timeout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19755 6f19259b-4bc3-4df7-8a09-765794883524
This patch add PTP CRB support in BIOS Setup.
It can:
1) Display the PTP capability (TIS/FIFO/CRB)
2) Display the PTP current interface (TIS/FIFO/CRB)
3) Let user select CRB/FIFO, if supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19743 6f19259b-4bc3-4df7-8a09-765794883524
The TPM RequestUseTpm API can only set register to
use the hardware, but it can not be used to distinguish
TPM12 or TPM2 device.
TPM PTP defines same address with TIS, so we need
detect the TPM device is PTP or TIS in RequestUseTpm.
Also, Tcg2Config driver call RequestUseTpm to detect
TPM hardware device. So we have to add check here.
There is no need to support PTP CRB style SubmitCommand(),
because TPM2 device can not accept TPM12 style command.
This patch also uses TpmTis.h instead of duplicate
definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19742 6f19259b-4bc3-4df7-8a09-765794883524
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original ACPI table only
handles PTP FIFO/TIS interface. This patch adds
PTP CRB interface support.
The current logic is that SMM driver will runtime
detect TPM device interface (CRB or FIFO/TIS) and
publish TPM2 table based on result.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19741 6f19259b-4bc3-4df7-8a09-765794883524
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original lib only handles
PTP FIFO/TIS interface. This patch adds PTP CRB
interface support.
The current logic is that lib will runtime detect
TPM device interface (CRB or FIFO/TIS) and call
proper function to access hardware.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19740 6f19259b-4bc3-4df7-8a09-765794883524
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19729 6f19259b-4bc3-4df7-8a09-765794883524
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19728 6f19259b-4bc3-4df7-8a09-765794883524
Add the following APIs that are required by TcgPei and/or TcgDxe to
the Tpm12CommandLib instance:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19727 6f19259b-4bc3-4df7-8a09-765794883524
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19725 6f19259b-4bc3-4df7-8a09-765794883524
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19724 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19723 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19722 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19721 6f19259b-4bc3-4df7-8a09-765794883524
This module only handles MOR lock v1.
Now MOR lock V2 solution is published and added in variable driver. So this module can be deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19691 6f19259b-4bc3-4df7-8a09-765794883524
This patch updated final event log calculation based on
TCG EFI PROTOCOL rev9, 7.1.2 "All options implementation".
The previous logic is to save event to final event log
once GetEventLog() is called. 7.1.1 shows that we should
save event log to both normal even log area and final event
log area after GetEventLog() is called.
And there is no need to record TCG12 format log to final
event log area, and normal event log area can be BootServices
memory because OS will not access it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19661 6f19259b-4bc3-4df7-8a09-765794883524
Previously, NumberOfPCRBanks is calculated based on TPM
capability. However, there might be a case that TPM hardware
support 1 algorithm, but BIOS does not support and BIOS
mask it via PCD. This causes the conflict between
HashAlgorithmBitmap and NumberOfPCRBanks.
So we move the NumberOfPCRBanks calculation based on
HashAlgorithmBitmap to make sure the data is consistent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19660 6f19259b-4bc3-4df7-8a09-765794883524
ExtractConfig is called many times, so it's not efficient to update Secure Boot STR_SECURE_BOOT_STATE_CONTENT, STR_CUR_SECURE_BOOT_MODE_CONTENT string in ExtractConfig.
As these 2 strings are displayed on one form, always update them when opening the form.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19645 6f19259b-4bc3-4df7-8a09-765794883524
TCG event log and TCG2 final event log area length can be configurable to meet platform event log
requirement.
PcdTcgLogAreaMinLen : 0x10000 based on minimum requirement in TCG ACPI Spec 00.37
PcdTcg2FinalLogAreaLen : 0x8000 based on experience value
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19639 6f19259b-4bc3-4df7-8a09-765794883524
Some commands in Tpm2CommandLib accept AuthSession
as input parameter and copy to local command buffer.
After use, this AuthSession content should be zeroed,
because there might be some secrete there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19635 6f19259b-4bc3-4df7-8a09-765794883524
Tpm2Startup does not check TPM device return code.
It might cause problem, that error is not detected
in Tcg2Peim, for example, S3 resume case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19634 6f19259b-4bc3-4df7-8a09-765794883524
The official TCG standard uses Tcg2Protocol, instead of TrEE.
We should update TCG driver to use Tcg2Protocol, too.
TrEE should be used only for old TrEE implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19633 6f19259b-4bc3-4df7-8a09-765794883524
Change TisTpmCommand to Tpm2TisTpmCommand. Makes function name more clear.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19622 6f19259b-4bc3-4df7-8a09-765794883524
Debug messages are using a format strings with %s for
a Unicode string, but the strings being printed are
ASCII strings and this results in corrupted debug
messages. Change the the format string to use %a
instead of %s.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19617 6f19259b-4bc3-4df7-8a09-765794883524
Add SecureBoot UI support for Customized SecureBoot Mode transition according to Mantis 1263. User can do secure boot mode transition through UI.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19134 6f19259b-4bc3-4df7-8a09-765794883524
Add gEdkiiSecureBootModeGuid definition for Enable Secure Boot feature defined in
UEFI2.5 Mantis 1263. It is a private variable GUID.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19132 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers (like RVCT) reject input files that do not end in a
newline. So add missing newlines to some SecurityPkg header files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19107 6f19259b-4bc3-4df7-8a09-765794883524
If TPM2_Startup(TPM_SU_STATE) to return an error, the system
firmware that resumes from S3 MUST deal with a TPM2_Startup
error appropriately.
For example, issuing a TPM2_Startup(TPM_SU_CLEAR) command and
configuring the device securely by taking actions like extending
a separator with an error digest (0x01) into PCRs 0 through 7.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18760 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18677 6f19259b-4bc3-4df7-8a09-765794883524
Dong, Eric
Jiaxin Wu
Zhang, Chao B
Samer El-Haj-Mahmoud
Derek Lin
Liming Gao
Gary Lin
Jiewen Yao
Dandan Bi
Michael Kinney
Hao Wu
Star Zeng
Jordan Justen
Ard Biesheuvel