When combining UEFI firmware built from Tianocore with ARM Trusted
Firmware running in EL3, it is the responsibility of ATF that only
a single core enters the UEFI firmware in EL2, and the remaining cores
are released directly to the OS via PSCI SMC calls.
In this case, we don't need the MpCore flavor of PrePi or PrePeiCore,
but the UniCore flavor currently checks the CPU identification registers
directly, and refuses to proceed if the boot CPU is part of a MpCore
system.
So drop the ASSERT()'s that implement this check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PCI related PCDs are not platform specific, and architectural
protocols such as CpuIo2 are based on PCI provided MMIO to IO
translation, so these PCDs belong in ArmPkg not ArmPlatformPkg.
NOTE: this *WILL* break some out-of-tree platforms, the fix is changing
all consumers of gArmPlatformTokenSpaceGuid.PcdPci* to
gArmTokenSpaceGuid.PcdPci*
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The 64-bit version of the DS-5 debug script that retrieves the debug file
path from the PE/COFF image in memory assumes that the PE/COFF header is
packed, and that the debug directory entry in the optional header appears
at a fixed offset into the file. This is no longer true, now that we pad
between the file header and the PE header if the section alignment exceeds
the size of the header (which may be the case when the module contains a
vector table or small model code, which requires 2 KB or 4 KB section
alignment, respectively), to allow this padding to be emitted if the image
is subsequently converted to TE format.
So replace the fixed offset with a dereference of the appropriate header
field.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
This patch adds a PCD for the PL011 UART Interrupt as this is needed by
the Serial Port Console Redirection Table.
Code at: 68f26f23a2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This retypes some stack base PCD as 64-bit, and fixes up a number of references
to 64-bit PCDs (including the retypes ones), to use the correct PcdGet64()
accessors. Note that, in the case of FixedPcdGet64, this does not actually
caused any problems, since that resolves to an immediate value. But the
generic PcdGetxx accessors should be typed according to the size of the PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
[ard.biesheuvel: fixed up some instances in the 32-bit ARM code]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Support multiple PL061 controllers. If platform gpio driver couldn't be
found, PL061 gpio driver will continue to load PcdPL061GpioBase as the
register base.
It could be compatible with the use case of current PL061 gpio driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
TC2 reads 0x02 for the PL180 ID3 register instead of 0x00 as defined in
the spec.
However, the spec [1] states that the contents of ID3 register represent
the "configuration option of the peripheral" and thus not part of the
Prime Cell identification.
For this patch, we drop checking the value in MCI_PERIPH_ID_REG3.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0172a/index.html
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If the PL180 fails to probe, issue a warning on debug builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PL180 on TC2 has a dependency on gEfiCpuArchProtocolGuid. Without
adding the dependency, TC2 will crash in the PL180 driver.
This problem has been present since d340ef7 when TC2 stopped booting.
However, it was masked by 300fc77 which prevented PL180 from running on
TC2 due to TC2 using a version on PL180 newer than that documented
publicly.
[1] https://github.com/tianocore/edk2/commit/d340ef7
2014-08-26
ArmPkg/ArmArchTimerLib: Remove non required [depex] and IoLib
[2] https://github.com/tianocore/edk2/commit/300fc77
2015-08-25
ArmPlatformPkg/PL180MciDxe: check PrimeCell ID before initializing
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In the recent migration of the ARM Ltd. platforms to
https://git.linaro.org/uefi/OpenPlatformPkg.git, this file unfortunately
got left behind. Delete it to reduce confusion and (further) risk of
duplication of effort.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PL061 GPIO controller is a bit of an anachronism, and the existing
driver does nothing to hide this - leading to it being very tricky to
read.
Rewrite it to document (in comments and code) what is actually
happening, and fix some bugs in the process.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
PL061Initialize() did not actually do anything other than call
PL061Identify() - so cut out the middle man.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
For whatever reason, every single operation on the PL061 looked for an
"Initialized" flag, and manually called the initialization function if
not set. Move this to a single call on protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
The copyright statement in PL061Gpio.c would not fit on a normal terminal
screen. Break lines at <= 80 characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Currently, we don't pick up removable media (USB drives) or storage
devices connected via plug-in cards. Take the sledge hammer approach
for now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The Juno .dsc and .fdf files were recently deleted (currently held
in OpenPlatformPkg), but a spurious Makefile for building using it
was left in place. Drop the Makefile to complete the cleanup.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Harking back to the earliest days of software development for AArch64,
this piece of code abstracted away "early setup stuff" when the
software model came out of reset.
However, it is unmaintained and has been superseded by ARM Trusted
Firmware. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Juno is now managed in OpenPlatformPkg, including the ACPI
tables - so delete this unmaintained copy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file,
called "board.dtb" and the motherboard configuration makes the right
choice about which DTB file gets written as board.dtb in NOR.
The code attempts to select which DTB it should use based on the board
variant or configuration. And this doesn't work because those DTB files
aren't present in NOR flash.
So remove the DTB variants and only load board.dtb.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Code was inserted to create default boot entries for Juno R1. These
don't work, but they are also preventing the board from booting into the
default options that Intel BDS would otherwise boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Setup the EFI System Table with information about the
Console Devices early, so that error messages in bds
are printed on the console earlier.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Sec library was built by the AARCH64 FVP models, but the binary was
unused because it was part of a legacy booting strategy from before ARM
Trusted Firmware came along.
This change requires changes in OpenPlatformPkg to remove the Sec binary
from the FVP build.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
This platform is untested and no longer supported, so remove it from the
tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, Juno exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
We can't remove ArmJuno.dec yet because ACPI still uses it to set the
include path to ArmPlatform.h.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
[2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/Juno
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, FVP exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
[2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/VExpress
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, TC2 exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
The .dsc and .fdf files in ArmPlatformPkg are unused. Remove them as
part of a general cleanup of ArmPlatformPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19787 6f19259b-4bc3-4df7-8a09-765794883524
After fixing ArmGicEnableDistributor() in a previous patch, there is no
longer a reason to run the GICv3 in v2 mode, so remove the PCD override.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19275 6f19259b-4bc3-4df7-8a09-765794883524
The return_from_exception implementation in Sec/Helper.S (the GCC
version) deviates from the RVCT version, in a way that suggests that
both may have been broken at some point, and that they weren't fixed
in the same way nor at the same time.
So bring the GCC version in line with the RVCT version, and at the
same time, deobfuscate the comment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19244 6f19259b-4bc3-4df7-8a09-765794883524
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19243 6f19259b-4bc3-4df7-8a09-765794883524
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19242 6f19259b-4bc3-4df7-8a09-765794883524
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19241 6f19259b-4bc3-4df7-8a09-765794883524
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19240 6f19259b-4bc3-4df7-8a09-765794883524
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19239 6f19259b-4bc3-4df7-8a09-765794883524
This is the complementary patch for the commit 7945b29, which strictly
aligns temporary heap size and temporary stack size, but does not do
the same thing when switching stack and heap to permanent memory, and
then it may cause fatal data corruption like PHIT HOB lost and stack
pointer unaligned.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19213 6f19259b-4bc3-4df7-8a09-765794883524
Now that we removed the complete ArmPlatformGlobalVariable implementation,
remove stale PCD references to it from ArmVExpress-CTA15-A7.dsc
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19173 6f19259b-4bc3-4df7-8a09-765794883524
RVCT does not like the arithmetic involving a VOID* pointer that was
introduced in SVN r19163, so use explicit casts instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19172 6f19259b-4bc3-4df7-8a09-765794883524
Instead of using fuzzy arithmetic with a hardcoded stack alignment value
of 0x4, use the symbolic constant CPU_STACK_ALIGNMENT (which is at least
8 bytes, btw) to round the temporary stack base and size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19163 6f19259b-4bc3-4df7-8a09-765794883524
Now that we removed all references to the ArmGlobalVariable definitions
in the various lowlevel PrePi and PrePeiCore init routines, and removed
the PPI and HOB references from PlatformPeim, it is time to say goodbye
to ArmGlobalVariable. So remove the includes and the .DEC declarations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19003 6f19259b-4bc3-4df7-8a09-765794883524
PlatformIntelBdsLib does not use gArmGlobalVariableGuid so drop
the declaration from the .inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19002 6f19259b-4bc3-4df7-8a09-765794883524
EblCmdLib does not use anything that is declared by ArmGlobalVariableHob.h,
so remove the include.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19001 6f19259b-4bc3-4df7-8a09-765794883524
ArmVExpressFastBootDxe does not use gArmGlobalVariableGuid so drop
the declaration from the .inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19000 6f19259b-4bc3-4df7-8a09-765794883524
ArmJunoDxe does not use gArmGlobalVariableGuid so drop the declaration
from the .inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18999 6f19259b-4bc3-4df7-8a09-765794883524
Remove the GUID references to gArmGlobalVariableGuid and includes
of ArmGlobalVariableHob.h since they are not used by the ARM BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18998 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the Sec init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18995 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the PrePeiCore init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18994 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to query the ArmGlobalVariable PPI and install
the ArmGlobalVariable HOB. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18993 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the PrePi init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18992 6f19259b-4bc3-4df7-8a09-765794883524
This removes the SEC, PEI and DXE variants of ArmPlatformGlobalVariableLib,
which is no longer used, and should not be used since it violates the PI
spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18990 6f19259b-4bc3-4df7-8a09-765794883524
This removes the PeiServicesTablePointerLib implementation under
ArmPlatformPkg that violates the PI spec, and hence should not be
used. Instead, the implementation that resides under ArmPkg should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18989 6f19259b-4bc3-4df7-8a09-765794883524
We can remove all mention of ArmPlatformGlobalVariableLib now that
there are no remaining [transitive] dependencies on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18988 6f19259b-4bc3-4df7-8a09-765794883524
As pointed out by Eugene, the ArmPlatformPkg implementation of
PeiServicesTablePointerLib violates the PI sec, since it uses
ArmPlatformGlobalVariableLib to store the PEI services table pointer
rather than the thread ID cpu registers as the spec requires.
So instead, move to the ArmPkg version of this library, which does
adhere to the PI spec.
Reported-by: Eugene Cohen <eugene@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18987 6f19259b-4bc3-4df7-8a09-765794883524
This updates the PrePiHobListPointerLib implementation in ArmPlatformPkg
to move away from ArmPlatformGlobalVariableLib and instead use the thread
ID CPU registers (TPIDRURW and TPIDR_EL0 for v7 and v8, respectively)
for storing the HobList pointer.
Since PrePiHobListPointerLib is specific to PrePi (where PEI core is skipped)
we can share these registers with the PEI services table pointer. By the
same reasoning, the PEI services table pointer and the HobList pointer
already shared the same offset in the ArmPlatformGlobalVariable array.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18982 6f19259b-4bc3-4df7-8a09-765794883524
The PrePeiCore vector table for AArch64 mode is only half populated.
However unlikely, if exceptions from lower exception levels are ever
taken, they should be reported correctly, rather than causing a
recursive undefined instruction fault on the zero padding that was
introduced by commit SVN r18904 ("ArmPkg/ArmPlatformPkg: position
vectors relative to base"). So add the missing entries, and wire
them up to the default handler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18976 6f19259b-4bc3-4df7-8a09-765794883524
We currently rely on .align directives to ensure that each exception
vector entry is the appropriate offset from the vector base address.
This is slightly fragile, as were an entry to become too large (greater
than 32 A64 instructions), all following entries would be silently
shifted until they meet the next alignment boundary. Thus we might
execute the wrong code in response to an exception.
To prevent this, introduce a new macro, VECTOR_ENTRY, that uses .org
directives to position each entry at the precise required offset from
the base of a vector. A vector entry which is too large will trigger a
build failure rather than a runtime failure which is difficult to debug.
For consistency, the base and end of each vector is similarly annotated,
with VECTOR_BASE and VECTOR_END, which provide the necessary alignment
and symbol exports. The now redundant directives and labels are removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18904 6f19259b-4bc3-4df7-8a09-765794883524
Some users of this library (i.e., FVP-AArch64 and RTSM-A15_MPCore)
may be built to execute straight from NOR flash. Since device mappings
should have the XN attribute set (according to the architecture), mapping
the NOR flash as a device may prevent it from being executable.
Since the NOR flash DXE driver is perfectly capable of setting the correct
attributes for the region it needs to write to, and since we will be
executing from DRAM by that time anyway, we can simply map the NOR flash
as normal memory initially.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18890 6f19259b-4bc3-4df7-8a09-765794883524
The ARM and AARCH64 linker scripts have recently been updated so that
the memory layouts of the ELF and PE/COFF versions of each module are
identical. In particular, this means that the ELF images now have a
hole before the first section rather than starting at offset 0x0, which
means we no longer have to correct for this difference when loading the
ELF image into the debugger.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18775 6f19259b-4bc3-4df7-8a09-765794883524
The JunoR1 has a GICv2m which is a GICv2 with a little piece of hardware
that has some memory mapped locations that can trigger traditional SPI
interrupts. This allows some basic PCIe MSI capabilities.
Setup the SPI range that is mapped by the MSI window. This range is
described in the JunoR1 SoC TRM, table 3-3. Under Interrupt ID 244-351 is
described as "GICv2m PCI Express MSI". In the future when these tables
are generated programmatically the information may be found in the
MSI_TYPER register as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18723 6f19259b-4bc3-4df7-8a09-765794883524
These patches correct a number of problems with the JUNO ACPI tables.
First, put CCA attributes on the devices which can do DMA. This is
because the linux kernel now requires ARM64 devices specify a coherency
model. Without CCA the devices are unable to perform DMA.
Update the EHCI window to a full 64k as documented in the
Juno Platform SoC TRM. This makes it match the values used in some
other places.
Finally, add some _DSD entries for the SMSC ethernet chip.
The latter changes are required for the mainline kernels to use the adapter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18628 6f19259b-4bc3-4df7-8a09-765794883524
All of AcpiSsdtRootPci.asl and some bits of Gtdt.aslc used LF-only
line separators. Fix before committing new modifications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18627 6f19259b-4bc3-4df7-8a09-765794883524
The ValidateFvHeader() function checks several conditions against the
firmware volume header. Failure of the first of these checks, reported as
"No Firmware Volume header present", is a common situation for unformatted
flash images, especially when a new virtual machine is created.
Similarly, "Variable Store Guid non-compatible" is common when the
firmware binary is switched from Secure Boot-incapable to Secure
Boot-capable, or vice versa.
The only caller of ValidateFvHeader(), NorFlashFvbInitialize(), handles
all these mismatches by installing a new FVB header. It also emits
another, loud ERROR message (which is even less justified when it is
triggered by (BootMode == BOOT_WITH_DEFAULT_SETTINGS)).
Downgrade these messages from EFI_D_ERROR to EFI_D_INFO, so that they
don't clutter the debug output when the PcdDebugPrintErrorLevel mask only
enables EFI_D_ERROR (i.e., in a "silent" build).
These messages have annoyed / confused users; see for example:
- https://bugzilla.redhat.com/show_bug.cgi?id=1270279
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/2772/focus=2869
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Drew Jones <drjones@redhat.com>
Cc: Yehuda Yitschak <yehuday@marvell.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18618 6f19259b-4bc3-4df7-8a09-765794883524
Currently the MADT signature and revision is mapped to v1.0 macros
which results in MADT with incorrect entries in the header for Juno.
This patch fixes these EFI_ACPI_*_0_MULTIPLE_APIC_DESCRIPTION_TABLE
macros by using appropriate v5.0 versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18572 6f19259b-4bc3-4df7-8a09-765794883524
These are no longer used by any platform in the tree, nor are they
of any significance to any out of tree platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18571 6f19259b-4bc3-4df7-8a09-765794883524
In order to support the Properties Table memory protection feature
on 32-bit ARM, build DXE_RUNTIME_DRIVER type binaries with 4 KB section
alignment by setting the common-page-size linker command line option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18567 6f19259b-4bc3-4df7-8a09-765794883524
For 32-bit ARM platforms, it is essential that system memory starts
below the 4 GB limit, since that is the only memory we can address
using the UEFI spec mandated 1:1 mapping. So assert that this is the
case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18429 6f19259b-4bc3-4df7-8a09-765794883524
Make sure that the PEI memory region is carved out of memory that is
32-bit addressable, by taking MAX_ADDRESS into account (which is
defined as '4 GB - 1' on ARM)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18426 6f19259b-4bc3-4df7-8a09-765794883524
Commit r18308 ("ArmPlatformPkg/LcdGraphicsOutputDxe: check PrimeCell ID
before initializing") introduced a LcdIdentify() function to the PL111
LCD driver that makes it fail gracefully when executed on hardware that
does not have the IP. However, the LcdGraphicsOutputDxe driver is shared
with the HdLcd driver, which now fails to build due to the fact that it
has no LcdIdentity() function. So add a dummy implementation that always
returns EFI_SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18395 6f19259b-4bc3-4df7-8a09-765794883524
Like the ArmVirtPkg platforms up until SVN r17713, the ArmPlatformPkg
platforms built with the Intel BDS fail to signal the end-of-DXE event
'gEfiEndOfDxeEventGroupGuid' when entering the BDS phase, which results
in some loss of functionality, i.e., variable reclaim in the VariableDxe
drivers, and the splitting of the memory regions that is part of the recently
added UEFI 2.5 properties table feature.
As discussed on the edk2-devel mailing list here:
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16109
it is up to the platform BDS to signal that event, since there may be
platform specific ordering constraints with respect to the signalling
of the event that are difficult to honor at the generic level.
So add the SignalEvent () call to PlatformBdsInit () of ArmPlatformPkg's
PlatformBdsLib implementation for the Intel BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18394 6f19259b-4bc3-4df7-8a09-765794883524
This allows the FVP target to be built with UEFI Secure Boot enabled,
by passing -D SECURE_BOOT_ENABLE to the build command line. Note that
this requires the Intel BDS, or you will not be able to enroll
certificates, since the ARM BDS does not provide a GUI to do so.
The FVP Base model is recommended in this case, since the certificate
store is kept in NOR flash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18379 6f19259b-4bc3-4df7-8a09-765794883524
This adds support for the Intel BDS and enables it by default.
To revert to using the ARM BDS, pass '-D USE_ARM_BDS' on the
build command line.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18378 6f19259b-4bc3-4df7-8a09-765794883524
Add a call to EnableQuietBoot () to BdsPlatformPolicyBehavior(),
so that a splash screen is shown in case one is present under the
correct GUID in the FV, and we have graphics support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18377 6f19259b-4bc3-4df7-8a09-765794883524
InitializeConsolePipe () shadowed its own Status variable, and then
clobbered the top one before printing its error message. Instead,
use a NULL check on the LocateProtocol () output argument.
Also clean up coding style on the error path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18376 6f19259b-4bc3-4df7-8a09-765794883524
The Intel BDS platform library still depends on the ARM BDS specific
BdsLib. So replace its invocations with GenericBdsLib counterparts,
and fix up where needed, so that we can drop the dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18375 6f19259b-4bc3-4df7-8a09-765794883524
Now that the PL180 and PL111 drivers know how to behave when executed
on the Foundation model (which does not emulate the hardware), we can
remove the ARM_FOUNDATION_FVP ifdefs and produce a single build that
runs on both the Foundation model and the Base model.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18309 6f19259b-4bc3-4df7-8a09-765794883524
To deal gracefully with the absence of the PL111 hardware on
the Foundation model, check the PrimeCell ID before proceeding
with the installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18308 6f19259b-4bc3-4df7-8a09-765794883524
To deal gracefully with the absence of the PL180 hardware on
the Foundation model, check the PrimeCell ID before proceeding
with the installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18307 6f19259b-4bc3-4df7-8a09-765794883524
Remove the ARMGCC and ARMLINUXGCC from comments in the respective
Makefiles of ArmPlatformPkg and ArmJunoPkg. Also drop the wildly
outdated Versatile Express instructions, since they refer to ARMGCC
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18209 6f19259b-4bc3-4df7-8a09-765794883524
Now that GenFw correctly propagates the minimum alignment of the ELF
input sections to the PE/COFF binary, we can simply select 'auto'
alignment in the FDF Rule section instead of tweaking it by hand.
Also add the FIXED FFS attribute to the module types that may execute
in place. This enables a newly added optimization in GenFfs that strips
redundant padding, preventing excessive waste of FV space if the section
alignment is considerable (i.e., 2 KB or 4 KB)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18196 6f19259b-4bc3-4df7-8a09-765794883524
No need to hardcode the TE alignment anymore, now that GenFw sets
the PE/COFF alignment according to the alignment requirements of
the ELF input sections.
Also enable FIXED FFS placement so that we can reclaim some of the
space wasted to padding when using clang with 4 KB section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18195 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI .aslc files contain a ReferenceAcpiTable() function whose
sole purpose is to ensure that the table itself does not get optimized
away. However, when using clang, these dummy functions result in a 4 KB
section alignment requirement, which is silly since everything except
the .data section is discarded later anyway.
So instead, make ReferenceAcpiTable a CONST pointer to VOID*. This way,
we still have a .text section, which is mandatory for the PE/COFF
conversion, but no executable code with small model relocations that
impose additional alignment requirements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18194 6f19259b-4bc3-4df7-8a09-765794883524
Make global EFI_PEI_PPI_DESCRIPTOR instances CONST to prevent them
from being emitted into the .data section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18189 6f19259b-4bc3-4df7-8a09-765794883524
Since PrePeiCore's .text section contains an AARCH64 exception
vector table, its 2 KB alignment propagates to other sections as
well. Since this is a SEC module, it should not have any writable
data in the first place, so change some non-const PPI globals to
const. The resulting binary has no .data section at all, which
saves 2 KB in the XIP image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18188 6f19259b-4bc3-4df7-8a09-765794883524
Move to the parametrised generic GCC linker script and set 64 KB
alignment, instead of using the AARCH64 specific incremental linker
script for 64 KB alignment which is about to be removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18139 6f19259b-4bc3-4df7-8a09-765794883524
Remove obsolete ARM and AARCH64 platforms so the maintainers can
focus on the ones that are still supported, which are:
- TC2 (ArmVExpress-CTA15-A7.dsc)
- Foundation model and Fast model emulators (ArmVExpress-FVP-AArch64.dsc)
- Juno (ArmJunoPkg/ArmJuno.dsc)
- Cortex-A15 MPcore RTSM (ArmVExpress-RTSM-A15_MPCore)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18110 6f19259b-4bc3-4df7-8a09-765794883524
Clone ArmGicArchLib into a SEC phase specific ArmGicArchSecLib
so that we can modify the former in a subsequent patch to cache
the GIC revision in a global variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18099 6f19259b-4bc3-4df7-8a09-765794883524
The current implementation of ArmGicGetSupportedArchRevision ()
that is used by all ARM platforms is entirely stateless (in order
to support being executed from flash) so it needs to interrogate
the hardware for the supported GIC revision upon each invocation.
However, this statelessness is only needed for SEC type modules;
in all other cases, we could easily determine the GIC revision once,
and store the result in a global variable.
In preparation of having separate early and normal versions, this patch
introduces the ArmGicArchLib library class and default implementation,
and moves the existing ArmGicGetSupportedArchRevision () into it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18098 6f19259b-4bc3-4df7-8a09-765794883524
LocateProtocol only gets the 1st SNP instance and this will be wrong
in a system with multiple SNP instances installed. Use HandleProtocol
instead.
Cc: Olivier Martin <olivier.martin@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18030 6f19259b-4bc3-4df7-8a09-765794883524
Recent changes have made the A15-A7 firmware bigger...
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18029 6f19259b-4bc3-4df7-8a09-765794883524
There are still ARM/AArch64 Linux kernels that do not support EFI Stub.
By using the EFI Linux loader as the default option we can boot any
Linux kernel from UEFI as Linux kernel with EFI stub can also be
booted with the legacy way.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17975 6f19259b-4bc3-4df7-8a09-765794883524
When PcdBdsLinuxSupport is enabled, users can create boot
entries for the legacy EFI Linux loader.
The ARM BDS detects if the image is a EFI image if not
then it assumes it is a legacy Linux kernel (a kernel
without EFI Stub).
If the Boot Manager did not manage to load the binary
(it could happen when the binary is on the network or
not present on the media yet).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17974 6f19259b-4bc3-4df7-8a09-765794883524
The Linux Loader has been removed from ARM BDS. These PCDs
are not needed anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17973 6f19259b-4bc3-4df7-8a09-765794883524
PcdDefaultBootType has been removed when the embedded
Linux Loader has been removed from BdsLib.
The boot arguments (defined by PcdDefaultBootArgument)
are now always targetting EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17971 6f19259b-4bc3-4df7-8a09-765794883524
Since the embedded Linux Loader has been removed from BdsLib
there is no more Linux specific boot option.
All the boot options are now expected to be arguments for
EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17970 6f19259b-4bc3-4df7-8a09-765794883524
This change removes the embedded Linux Loder from BdsLib.
BdsLib becomes OS agnostic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17969 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Sami Mujawar
Leendert van Doorn
Haojian Zhuang
Ryan Harkin
Leif Lindholm
Supreeth Venkatesh
Evan Lloyd
Jordan Justen
Heyi Guo
Star Zeng
Mark Rutland
Jeremy Linton
Laszlo Ersek
Sudeep Holla
Olivier Martin