The PL180 SD host controller driver is only used on emulated ARM
platforms, uses an obsolete version of the MMC host protocol and
does not adhere to the UEFI driver model.
It has been moved into edk2-platforms alongside the only platforms
that use it, so we can drop it from the EDK2 core repository.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some platform support dynamic clocking, which is controlled by some
jumper setting or hardware registers. Result of that is that PCD
PL011UartClkInHz would need to be updated for frequency change.
This patch implements support for dynamic frequency for PL011 uart.
This patch implements default lib, which is using Pcd. Platform which
needs dynamic clocking needs implement PL011UartClockLib
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.
This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.
Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently framebuffer memory is either reserved in special VRAM or
dynamically allocated using boot services memory allocation functions.
When allocated using boot services calls the memory has to be allocated
as EfiBootServicesData. Unfortunately failures have been seen with this
case. There is also an unfortunate lack of control on the placement of
the framebuffer.
This change introduces two PCDs, PcdArmLcdFrameBufferBase and
PcdArmLcdFrameBufferSize which enable build time reservation of the
framebuffer, avoiding the need to allocate dynamically. This allows
the framebuffer to appear as "I/O memory" outside of the normal RAM
map, which is similar to the "VRAM" case.
This change has no impact on current code, only enables the option
of build time reservation of framebuffers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.
If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.
NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms. Rather than have
divergent code, this build switch allows a simple, pragmatic solution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format
In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.
Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.
This change adds PcdGopPixelFormat to configure pixel format as
PixelRedGreenBlueReserved8BitPerColor or
PixelBlueGreenRedReserved8BitPerColor or
PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.
Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask. Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BEFORE depex opcode that we currently use to force ourselves in front
of the variable driver cannot be combined with other depex opcodes.
Replace the depex with TRUE, and signal NvVarStoreFormattedLib through the
installation of "gEdkiiNvVarStoreFormattedGuid".
Platforms that rely on NorFlashDxe to format the variable store (as
opposed to formatting a variable store template through an FDF file, as
part of the build) should hook NvVarStoreFormattedLib into the variable
drivers they use, so that the latter await our cue.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Retire a whole bunch of ArmPlatformPkg PCDs that are either related
to the ARM BDS, to secure world execution or to stuff that has been
migrated to edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add the declaration and include file for the new LcdHwLib library class,
which will allow us to abstract away from platform variations in the
LCD graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
[ardb: add NULL implementation as well and add it to ArmPlatformPkg.dsc]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
None of the platforms we support use these so remove them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The function ArmPlatformInitializeSystemMemory() is defined by
ArmPlatformLib, but is only ever called when using the PrePeiCore
flavor of the startup code. Also, none of the remaining upstream
platforms actually implement anything in that function in the first
place. So let's just remove it altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PL011 code in ArmPlatformPkg is organized in a weird way: there is
a single PL011Uart.h header file under Include/Drivers containing both
register definitions and function entry points. The PL011Uart library
itself is in Drivers/ but it is actually a library.
So let's clean this up: add a new PL011UartLib library class and associated
header file containing only the library prototypes, and move the library
itself under Library/ using a new GUID, with the register definitions moved
into a local header file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Juno and FVP platform implement the SBSA Watchdog timers.
Added PcdWatchdogCount to specify the number of Watchdog timers
that are available.
This allows configurability and an option to disable the watchdog
timers if required for testing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ZTE/SanChip version pl011 has different reg offset and bit offset
for some registers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The built-in Linux Loader is obsolete and not included in most builds.
The patch sets the PcdBdsLinuxSupport default value to FALSE and prevents
ArmBds from looking for built-in Linux Loader by default and ASSERTing
when it cannot be found. Platforms which still using built-in loader have
to set this PCD in their platform description file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Juno has several serial ports, one of which may be used for a remote
debug interface (e.g. gdb, WinDbg). The debug serial port needs to
be distinct from that used for UEFI trace to prevent corruption of
debugger protocol messaging.
The UEFI spec requires that serial devices be initialised to default
settings. (11.8 Serial I/O Protocol - "The default attributes for all
UART-style serial device interfaces are: 115,200 baud, ..."
and 17.3.3 EFI Debugport Variable - "These defaults must be used in the
absence of a DEBUGPORT variable...")
This change adds initialization of the serial device reported in the
ACPI DBG2 table. The initialisation is done early in the boot to allow
the possibility of remote debug of UEFI itself.
NOTE: This is functionally dependent on the DBG2 table being updated in
OpenPlatformPkg, but is required as a precursor to that change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PCI related PCDs are not platform specific, and architectural
protocols such as CpuIo2 are based on PCI provided MMIO to IO
translation, so these PCDs belong in ArmPkg not ArmPlatformPkg.
NOTE: this *WILL* break some out-of-tree platforms, the fix is changing
all consumers of gArmPlatformTokenSpaceGuid.PcdPci* to
gArmTokenSpaceGuid.PcdPci*
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch adds a PCD for the PL011 UART Interrupt as this is needed by
the Serial Port Console Redirection Table.
Code at: 68f26f23a2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This retypes some stack base PCD as 64-bit, and fixes up a number of references
to 64-bit PCDs (including the retypes ones), to use the correct PcdGet64()
accessors. Note that, in the case of FixedPcdGet64, this does not actually
caused any problems, since that resolves to an immediate value. But the
generic PcdGetxx accessors should be typed according to the size of the PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
[ard.biesheuvel: fixed up some instances in the 32-bit ARM code]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that we removed all references to the ArmGlobalVariable definitions
in the various lowlevel PrePi and PrePeiCore init routines, and removed
the PPI and HOB references from PlatformPeim, it is time to say goodbye
to ArmGlobalVariable. So remove the includes and the .DEC declarations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19003 6f19259b-4bc3-4df7-8a09-765794883524
This removes the PeiServicesTablePointerLib implementation under
ArmPlatformPkg that violates the PI spec, and hence should not be
used. Instead, the implementation that resides under ArmPkg should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18989 6f19259b-4bc3-4df7-8a09-765794883524
This updates the PrePiHobListPointerLib implementation in ArmPlatformPkg
to move away from ArmPlatformGlobalVariableLib and instead use the thread
ID CPU registers (TPIDRURW and TPIDR_EL0 for v7 and v8, respectively)
for storing the HobList pointer.
Since PrePiHobListPointerLib is specific to PrePi (where PEI core is skipped)
we can share these registers with the PEI services table pointer. By the
same reasoning, the PEI services table pointer and the HobList pointer
already shared the same offset in the ArmPlatformGlobalVariable array.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18982 6f19259b-4bc3-4df7-8a09-765794883524
When PcdBdsLinuxSupport is enabled, users can create boot
entries for the legacy EFI Linux loader.
The ARM BDS detects if the image is a EFI image if not
then it assumes it is a legacy Linux kernel (a kernel
without EFI Stub).
If the Boot Manager did not manage to load the binary
(it could happen when the binary is on the network or
not present on the media yet).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17974 6f19259b-4bc3-4df7-8a09-765794883524
The Linux Loader has been removed from ARM BDS. These PCDs
are not needed anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17973 6f19259b-4bc3-4df7-8a09-765794883524
Remove gVariableAuthenticatedRuntimeDxeFileGuid definition in
ArmPlatformPkg.dec and use gVariableRuntimeDxeFileGuid in
NorFlashAuthenticatedDxe.inf as auth Variable driver in SecurityPkg
and Variable driver in MdeModulePkg have been merged.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17768 6f19259b-4bc3-4df7-8a09-765794883524
... since gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut has recently
been introduced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17443 6f19259b-4bc3-4df7-8a09-765794883524
The NorFlashDxe uses an explicit 'BEFORE xxx' Depex declaration to
ensure that it is dispatched before VariableRuntimeDxe, and uses the
file GUID of the latter as 'xxx' explicitly to accomplish that.
However, when enabling UEFI Secure Boot, this breaks down since the
authenticated VariableRuntimeDxe is a completely separate driver, with
a different GUID. Also, the hardcoded dependency on gEfiVariableGuid,
which is not used under UEFI Secure Boot, needs to be factored out in
order to allow this driver to be used.
So clone NorFlashDxe.inf into NorFlashAuthenticatedDxe.inf, and fix
up the dependencies so they refer to gEfiAuthenticatedVariableGuid and
SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17355 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
Remove the installation of the FDT for Juno into the UEFI Configuration
Table from the Juno specific DXE driver. Use the FdtPlatformDxe driver to
do it instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16938 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16325 6f19259b-4bc3-4df7-8a09-765794883524
Allow the PCDs gArmPlatformTokenSpaceGuid.PcdPL031RtcBase and
gArmPlatformTokenSpaceGuid.PcdPL031RtcPpmAccuracy PCDs to be
declared as PcdsDynamic by the platform so they can be overridden
during boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16015 6f19259b-4bc3-4df7-8a09-765794883524
Add additional structure to get file meta-data information from BootMonFS
based files. AXF files are processed by the Flash loader and the ELF header
stripped. The relevant information is stored in the file-system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15902 6f19259b-4bc3-4df7-8a09-765794883524
This is the filesystem created by the microcontroller on NOR Flash of the ARM Versatile
Express Development Board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15126 6f19259b-4bc3-4df7-8a09-765794883524
On ARM PLatforms, there is no standard way to know how many cores are
available on the platform.
This PCD is expected to contain this number.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13769 6f19259b-4bc3-4df7-8a09-765794883524
Because this driver can be used for different purposes (Terminal, Debug port, communication),
its initialization function has been extended to accept additional settings.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13071 6f19259b-4bc3-4df7-8a09-765794883524
CFI Flash differentiates DeviceBaseAddress with BlockAddress in
its protocol. The DeviceBaseAddress was not considered in the
previous version of this driver.
This version also fixes some bugs in the implementation of the
CFI protocol.
This new version also uses the Boot Mode Hob to reinitialized the
FVB when Boot Mode is equal to BOOT_WITH_DEFAULT_SETTINGS.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13064 6f19259b-4bc3-4df7-8a09-765794883524
Every CPUs have their own initialization requirements.
This library allows to allows to abstract these initialization requirements
into the ARM Platform common components.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12448 6f19259b-4bc3-4df7-8a09-765794883524
This library hides where the 'XIP' Global Variable are located in the memory.
It is expected the Sec/PrePi modules define the Global Variable area through
the GlobalVariable HOB.
The ArmPlatformGlobalVariableLib library allows access to global variables by
their offsets in this region.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12420 6f19259b-4bc3-4df7-8a09-765794883524
In the previous version, every cores had the same stack size.
To avoid to waste memory with secondary core stacks, the primary core stack
size is now different from the secondary cores stack size.
These are the Stack PCDs and their default values:
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecPrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecSecondaryStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecMonStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecMonStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x1000
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12415 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Michael D Kinney
Ard Biesheuvel
Udit Kumar
Girish Pathak
Laszlo Ersek
Sami Mujawar
Jun Nie
Daniil Egranov
Evan Lloyd
Leendert van Doorn
Olivier Martin
Star Zeng
Ronald Cron
Leif Lindholm
Harry Liebel
oliviermartin