This patch fixes two issues below:
1. SCT SetTime_Func failures.
- https://github.com/pftf/RPi4/issues/164
2. Using shell time and date commands to set time can't work.
The problem is that gRT->SetTime always returns EFI_INVALID_PARAMETER
error status.
The root cause is that LibSetTime() sets RtcEpochSeconds variable with
inconsistent attributes. One is without EFI_VARIABLE_NON_VOLATILE,
the other one is with EFI_VARIABLE_NON_VOLATILE. That caused that the
variable driver returns EFI_INVALID_PARAMETER. Per UEFI spec, if a
preexisting variable is rewritten with different attributes,
SetVariable() shall not modify the variable and shall return
EFI_INVALID_PARAMETER.
Therefore, the solution is to add EFI_VARIABLE_NON_VOLATILE attribute
to the first EfiSetVariable() call to make two calls consistent.
By the way, this patch also fix a minor issue with a debug message.
Signed-off-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
In the AmdSevX64 build, use BlobVerifierLibSevHashes to enforce
verification of hashes of the kernel/initrd/cmdline blobs fetched from
firmware config.
This allows for secure (measured) boot of SEV guests with QEMU's
-kernel/-initrd/-append switches (with the corresponding QEMU support
for injecting the hashes table into initial measured guest memory).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add an implementation for BlobVerifierLib that locates the SEV hashes
table and verifies that the calculated hashes of the kernel, initrd, and
cmdline blobs indeed match the expected hashes stated in the hashes
table.
If there's a missing hash or a hash mismatch then EFI_ACCESS_DENIED is
returned which will cause a failure to load a kernel image.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Co-developed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
[ardb: add CryptoPkg to accepted dependencies list for CI]
Split the existing 4KB page reserved for SEV launch secrets into two
parts: first 3KB for SEV launch secrets and last 1KB for firmware
config hashes.
The area of the firmware config hashes will be attested (measured) by
the PSP and thus the untrusted VMM can't pass in different files from
what the guest owner allows.
Declare this in the Reset Vector table using GUID
7255371f-3a3b-4b04-927b-1da6efa8d454 and a uint32_t table of a base
and size value (similar to the structure used to declare the launch
secret block).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Co-developed-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Round up the size of the SEV launch secret area to a whole page, as
required by BuildMemoryAllocationHob. This will allow the secret
area defined in the MEMFD to take less than a whole 4KB page.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In QemuKernelLoaderFsDxeEntrypoint we use FetchBlob to read the content
of the kernel/initrd/cmdline from the QEMU fw_cfg interface. Insert a
call to VerifyBlob after fetching to allow BlobVerifierLib
implementations to add a verification step for these blobs.
This will allow confidential computing OVMF builds to add verification
mechanisms for these blobs that originate from an untrusted source
(QEMU).
The null implementation of BlobVerifierLib does nothing in VerifyBlob,
and therefore no functional change is expected.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Co-developed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BlobVerifierLib will be used to verify blobs fetching them from QEMU's
firmware config (fw_cfg) in platforms that enable such verification.
The null implementation BlobVerifierLibNull treats all blobs as valid.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Support QEMU's -kernel option.
Create a QemuKernel.c for PlatformBootManagerLibGrub
which is an exact copy of the file
PlatformBootManagerLib/QemuKernel.c .
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Newer kernels support efistub and therefore don't need all the legacy
stuff in X86QemuLoadImageLib, which are harder to secure. Specifically
the verification of kernel/initrd/cmdline blobs will be added only to
the GenericQemuLoadImageLib implementation, so use that for SEV builds.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commit 96201ae7bf ("OvmfPkg/AmdSev/SecretDxe: make secret location
naming generic", 2020-12-15) replaced references to SEV with the generic
term Confidential Computing, but missed the file header comment. Fix
the naming in that header.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The upcoming SEV-SNP support will need to make a few additional guest
termination requests depending on the failure type. Let's move the logic
to request the guest termination into a macro to keep the code readable.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The upcoming SEV-SNP support will need to make a few additional MSR
protocol based VMGEXIT's. Add a macro that wraps the common setup and
response validation logic in one place to keep the code readable.
While at it, define SEV_STATUS_MSR that will be used to get the SEV STATUS
MSR instead of open coding it.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The PageTables64.asm was created to provide routines to set the CR3
register for 64-bit paging. During the SEV support, it grew to include a
lot of the SEV stuff. Before adding more SEV features, let's move all
the SEV-specific routines into a separate file.
No functionality change intended.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3496
Add new EDKII_HTTP_CALLBACK_PROTOCOL in NetworkPkg,
Send HTTP Events via EDKII_HTTP_CALLBACK_PROTOCOL
when Dns/ConnectTcp/TlsConnectSession/InitSession
occurs.
Signed-off-by: Heng Luo <heng.luo@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3507
HTTP boot has a default set forced timeout value of 5 seconds
for getting the recovery image from a remote source.
This change allows the HTTP boot flow to get the IO timeout value
from the PcdHttpIoTimeout.
PcdHttpIoTimeout value is set in platform code.
Signed-off-by: Zachary Clark-Williams <zachary.clark-williams@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2507
Adding the auto-generated assembly files for X64 architectures.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Mike Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christopher Zurcher <christopher.zurcher@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2507
Adding OpensslLibX64.inf and modifying process_files.pl to process this
file and generate the necessary assembly files.
Adding OpensslLibX64Gcc.inf to allow building with GCC toolchain.
ApiHooks.c contains a stub function for a Windows API call.
uefi-asm.conf contains the limited assembly configurations for OpenSSL.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Mike Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christopher Zurcher <christopher.zurcher@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2507
The COMMON section is used by OpenSSL assembly-optimized crypto
functions. OpenSSL assembly code is auto-generated from the submodule
and cannot be modified to remove dependence on the COMMON section.
The default -fno-common compiler flag should still prevent variable from
being emitted into the COMMON section.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Christopher Zurcher <christopher.zurcher@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
* Update GetMaintainer.py to support an optional GitHub ID at the
end of maintainer and reviewer lines.
* Remove contents after email address from standard output
* Fix minor issue in --lookup to convert file path separators
from '\' to '/' to be compatible with regular expression
file matching.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
1. Reduce the debug message during boot.
2. Update SmmCore debug level of MemoryAttributesTable align to DxeCore.
Signed-off-by: Yang Gang <yanggang@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3459
This patch adds support for R_RISCV_PCREL_LO12_S relocation type.
The logic is same as existing R_RISCV_PCREL_LO12_I relocation
except the difference between load vs store instruction formats.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Pete Batard <pete@akeo.ie>
Cc: Abner Chang <abner.chang@hpe.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Acked-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
When reaching the assert, it can't be debugged because the PCD is
unknown. Therefore the PCD's GUID and token number should be printed.
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The following changes were addressed,
1. Smbios specs 3.4.0 table-51 bit5&6, these fields moved
from specific MemoryArrayLocationCXLFlexbus10AddonCard
to generic MemoryArrayLocationCXLAddonCard
to address both CXL1.0 and 2.0 CXL revisions.
2. Smbios specs 3.4.0 table-79, The memory technology name changed
from MemoryTechnologyIntelPersistentMemory
to MemoryTechnologyIntelOptanePersistentMemory.
Signed-off-by: Thotala Gopi <gopi.thotala@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
cmd_load_symbols.py can only load symbols from FV. Add the possibility to
use UEFI console output to calculate dll load address and send
add-symbol-file commands directly to ArmDS debugger
dll load address can't be used directly from UEFI output, see comment in
DebugPeCoffExtraActionLib: "This may not work correctly if you generate
PE/COFF directly as then the Offset would not be required".
1) Use objdump -S module.dll | grep <_ModuleEntryPoint> to get offset
in dll (offset)
2) Use Entrypoint=<address> from UEFI console output (entrypoint)
3) dll load address is (entrypoint)-(offset)
Signed-off-by: Artem Kopotev <artem.kopotev@arm.com>
Tested-by: Pierre Gondois <Pierre.Gondois@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3482
This patch adds a search function in the Config Editor GUI at
the top right corner. Once users key in the words to search,
it will look for the option containing the string in the
same page and display it. It also includes a README for this
function.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Loo Tung Lun <tung.lun.loo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
PCD_DYNAMIC_AS_DYNAMICEX is recently added to Edk2, and it can treat
Dynamic PCD to Dynamic Ex PCD, which is Uefi Payload needs.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3485
CacheLib EfiProgramMtrr Function takes MTRR number as a input parameter,
in the function the parameter is defined as UINTN were as the caller
calling MTTR number in UINT32.
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Digant H Solanki <digant.h.solanki@intel.com>
Cc: Sangeetha V <sangeetha.v@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3483
This patch initializes the linked list RegisteredRamDisks in
RamDiskDxeEntryPoint before the registration of gEfiRamDiskProtocolGuid
with InstallMultipleProtocolInterfaces, allowing ramdisks to be created
via a callback installed with RegisterProtocolNotify as soon as the
protocol is registered.
Without this, calling RamDisk->Register() in the callback causes a crash:
ASSERT [RamDiskDxe] MdePkg/Library/BaseLib/LinkedList.c(75): List->ForwardLink != ((void *) 0)
Signed-off-by: Trammell Hudson <hudson@trmm.net>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
V1: Assign the length and revision of UniversalPayload ExtraData
V2: Force int to UINT16
V3: Create a local variable to hold the size of ExtraData
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Change the PldHeader to Header in UNIVERSAL_PAYLOAD_EXTRA_DATA
The meaning of Pld is too general
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V1:
Universal Payload will consume Hobs from boot loader.
Dump all hobs in the Universal Payload entry.
V2:
Add function comments
V3:
minor change, for example Hobsize -> HobLength, SMBiosTable -> SmBiosTable
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Thiyagu Kesavan Balakrishnan <thiyagux.kesavan.balakrishnan@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When running Ecc on other repositories (e.g.: edk2-platforms with
edk2 as a submodule), edk2 modules are referenced.
E.g.: MdePkg/..
The PACKAGES_PATH env var can be used to reference other directories
containing packages. Set it so that Ecc can find these packages.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
'workspace_path' being an absolute path leads to 'ecc_csv' being
an absolute path. Then it won't be found among 'file' as they
are relative paths.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The edk2 path and the workspace path are identical when running
Ecc on edk2. When running Ecc on another repository
(e.g.: edk2-platforms with edk2 as a submodule of edk2-platforms),
these directories are different. Indeed, in the latter configuration,
Ecc must run git commands on the tested repository, i.e. the workspace
directory, edk2-platforms.
Thus, rename edk2_path as workspace_path.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The BaseTools directory is currently being located as a
sub-directory of the WORKSPACE env var. This might not be
true in other environments. Cf EDKII Build Specification,
s4.1.3 "Build Process Restrictions":
There is no restriction on the location of the EDK_TOOLS_PATH,
it may be located within a directory identified as the
WORKSPACE directory, or in any other location that is
accessible on the development workstation.
Locate the BaseTools directory using EDK_TOOLS_PATH instead.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1688
In order to support binary build, build tool add a
flag to convert type of Dynamic Pcd to DynamicEx Pcd
User can append -D PCD_DYNAMIC_AS_DYNAMICEX to build command
to enable this function.
Also, user can add "PCD_DYNAMIC_AS_DYNAMICEX = TRUE/FALSE" to the
defines section of Dsc file to enable this function.
PCD_DYNAMIC_AS_DYNAMICEX is a new reserved key word for this function.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the ConvertFceToStructurePcd.py tool generate
StructurePcd dsc file with comments from UNI file including
non-ascii character. Following DSC spec, there should not have
non-ascii character in DSC file. This patch removes the non-ascii
character when adding the comment and changes the circle R to (R).
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add STATIC_ASSERT() macros to verify that the compiler is
configured correctly for the use of L'' and L"" strings.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Remove 10 second delay workarounds for issues observed
when Mergify was originally enabled. These issues are
no longer present when GitHub branch protections are
used for status checks.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
* Enable Mergify queue feature to support auto rebase when
'push' label is set and gauarntee that all EDK II CI checks
are run before merging in changes with linear history.
* Use status checks configured in GitHub branch protections
* Allow non EDK II Maintainers to create a PR
Requires an EDK II Maintainer to accept the change and
request merge by adding 'push' label. Only EDK II Maintainers
have ability to set/clear labels.
* Do not automatically close PRs for personal builds.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Mergify adds merge commits to a PR when processing PRs using
the queue feature with auto rebase. Update PatchCheck.py
to ignore commit message issues with these merge commits.
These merge commits are not added to the base branch when
the PR is merged by Mergify.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
I'm relinquishing all my roles listed in "Maintainers.txt", for personal
reasons.
My email address <lersek@redhat.com> remains functional.
To my understanding, my employer is working to assign others engineers to
the edk2 project (at their discretion).
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3454
On Linux the shell expands the wildcard paths and causes multiple files
to be missed. This change adds additional quotes to defer expansion in
order to bring parity in cspell result.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Sunny Wang
Dov Murik
James Bottomley
Brijesh Singh via groups.io
Brijesh Singh
Heng Luo
Zachary Clark-Williams
Christopher Zurcher
Michael D Kinney
Yang Gang
Abner Chang
Sunil V L
Daniel Schaefer
gthotala
Artem Kopotev
Zhiguang Liu
Loo, Tung Lun
S, Ashraf Ali
Trammell Hudson
Tan, Dun
Pierre Gondois
Bob Feng
Chen, Christine
Laszlo Ersek
Sean Brogan