UEFI spec:
Each load option entry resides in a Boot####, Driver####, SysPrep####,
OsRecovery#### or PlatformRecovery#### variable where #### is replaced
by a unique option number in printable hexadecimal representation using
the digits 0-9, and the upper case versions of the characters A-F
(0000-FFFF).
The patch also makes L"HwErrRec####" follow this rule.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Per UEFI spec UpdateImageSize may or may not include Firmware Image
Authentication information. so for FMP auth capsule, UpdateImageSize
should include the Image auth info.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we now have EBC support for AArch64, enable it by default
on both QEMU and Xen platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is not to allocate reset vector buffer after SaveRestoreFlag is set to
TRUE in MpInitExitBootServicesCallback(). Instead AllocateResetVector() will use
the previous allocated buffer address and save the contents before copying reset
vector code. At the same time, FreeResetVector() will restore original contents
after if SaveRestoreFlag is TRUE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Just move BackupAndPrepareWakeupBuffer() and RestoreWakeupBuffer() from
PeiMpLib.c to MpLib.c.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
It will be used by DxePeiLib also.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is to move allocating reserved memory for AP loop code to
InitMpGlobalData() and save the memory address in one global variable.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
After sending the 1st broadcast INIT-SIPI-SIPI, BSP will collect APs count after
one specified timeout delay. However, WakupAp() will restore reset vector
immediately after sending 1st broadcast INIT-SIPI-SIPI. Some processors may not
complete executing reset vector code.
This fix is to move MicroSecondDelay() from CollectProcessorCount() to the place
that is after sending 1st broadcast INIT-SIPI-SIPI and before FreeResetVector()
in WakupAp().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This reverts commit c0bcd3433f.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 0fcf8d4df8.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This reverts commit 95fc5a8775.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
If a FQDN contains 3 dots '.' like "a.b.c.com", the AsciiStrToIp4
will return success as the HostName has a valid IP address. So we
need to check if it is a decimal character before using AsciiStrDecimalToUintn.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
When building PIE (ET_DYN) executables, an additional RELA section is
emitted (in addition to the per-section .rela.text and .rela.data sections)
that is intended to be resolved at runtime by a ET_DYN compatible loader.
At the moment, due to the fact that we don't support GOT based relocations,
this dynamic RELA section only contains relocations that are redundant,
i.e., each R_xxx_RELATIVE relocation it contains duplicates a R_xxx_xx64
relocation appearing in .rela.text or .rela.data, and so we can simply
ignore this section (and we already ignore it in practice due to the fact
that it points to the NULL section, which has the SHF_ALLOC bit cleared).
For example,
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .text PROGBITS 0000000000000240 000000c0
000000000000427c 0000000000000008 AX 0 0 64
[ 2] .rela.text RELA 0000000000000000 00009310
0000000000001bf0 0000000000000018 I 7 1 8
[ 3] .data PROGBITS 00000000000044c0 00004340
00000000000046d0 0000000000000000 WA 0 0 64
[ 4] .rela.data RELA 0000000000000000 0000af00
0000000000000600 0000000000000018 I 7 3 8
[ 5] .rela RELA 0000000000008bc0 00008a10
0000000000000600 0000000000000018 0 0 8
[ 6] .shstrtab STRTAB 0000000000000000 0000b500
0000000000000037 0000000000000000 0 0 1
[ 7] .symtab SYMTAB 0000000000000000 00009010
0000000000000210 0000000000000018 8 17 8
[ 8] .strtab STRTAB 0000000000000000 00009220
00000000000000eb 0000000000000000 0 0 1
Relocation section '.rela.data' at offset 0xaf00 contains 64 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000004800 000100000001 R_X86_64_64 0000000000000240 .text + 3f5b
000000004808 000100000001 R_X86_64_64 0000000000000240 .text + 3f63
000000004810 000100000001 R_X86_64_64 0000000000000240 .text + 3f79
000000004818 000100000001 R_X86_64_64 0000000000000240 .text + 3f90
000000004820 000100000001 R_X86_64_64 0000000000000240 .text + 3fa6
...
Relocation section '.rela' at offset 0x8a10 contains 64 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000004800 000000000008 R_X86_64_RELATIVE 419b
000000004808 000000000008 R_X86_64_RELATIVE 41a3
000000004810 000000000008 R_X86_64_RELATIVE 41b9
000000004818 000000000008 R_X86_64_RELATIVE 41d0
000000004820 000000000008 R_X86_64_RELATIVE 41e6
000000004828 000000000008 R_X86_64_RELATIVE 41ff
...
Note that GOT based relocations result in entries that *only* appear in the
dynamic .rela section and not in .rela.text or .rela.data. This means two
things if we intend to add support for GOT based relocations:
- we must check that a dynamic RELA section exists;
- we must filter out duplicates between .rela and .rela.xxx, to prevent
emitting duplicate fixups into the PE/COFF .reloc section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We have added a new policy to get default value for question:
get default from other default id if current default is not specified.
But when getting default value for checkbox, if the default
flag is not set, it will set the default value to FALSE for checkbox.
This behavior in checkbox conflicts with the new added policy,
so now we move this behavior to the end of getting default form other
default id.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1) Fixed the VBT size from 0x1C00(7KB) to 0x1800(6KB) and typos, indentation
2) Updated offsets in hex values and offset from start of OPREGION
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
we need to locate the FSP Info Header before the stack is initialized to
access the cfg region for any UPD. Hence adding the
AsmGetFspInfoHeaderNoStack function to support it.
Note: This function is there in IntelFspPkg but got removed in IntelFsp2Pkg
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Satya Yarlagadda <satya.p.yarlagadda@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
add Pkcs7Sign.exe and related pem file into BinaryFiles.txt for build
server to automatically build the binary win32 files.
Cc: Liming Gao <liming.gao@intel.com>
CC: Erik Bjorge <erik.c.bjorge@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
in last commit 91ae29, it missed to add the
EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER for the auth FMP capsule.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The .rtf files in BaseTools/UserManuals still tell users to Report bugs
to sourceforge mail address. Since we no longer use the sourceforge
mailing lists we should update it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit removes the internal implementation of the function
InternalIsZeroBuffer(). Instead, it will use the API IsZeroBuffer() from
BaseMemoryLib in MdePkg.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of API IsZeroBuffer() via assembly in
BaseMemoryLibSse2.
The assembly codes use SSE2 XMM registers and related instructions.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of API IsZeroBuffer() via assembly for the
following library instances:
BaseMemoryLibMmx
BaseMemoryLibOptDxe
BaseMemoryLibOptPei
BaseMemoryLibRepStr
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of API IsZeroBuffer() via C language for the
following library instances:
BaseMemoryLib
PeiMemoryLib
UefiMemoryLib
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The CLANG38 toolchain creates a PIE binary at link time. This is
necessary since the LTO code generation may otherwise result in
code that cannot execute correctly when loaded above 2 GB.
PIE executables contain a RELA section consisting of dynamic
relocation entries that are intended for consumption by the loader
at runtime. For this reason, it has the SHF_ALLOC attribute set by
default, and will be identified by GenFw as a section that needs to
be copied into the PE/COFF binary, resulting in waste of space since
the PE/COFF loader does not use this data at all.
So mark the RELA section as informational: this will prevent the
linker from setting the SHF_ALLOC attribute, causing GenFw to
ignore it.
DxeCore.efi before:
Detected 'X64' type PE/COFF image consisting of 3 sections
Section alignment: 0x40
File alignment: 0x40
Section '.text' @ 0x00000240
File offset: 0x240
Virtual size: 0x21000
Raw size: 0x21000
Section '.data' @ 0x00021240
File offset: 0x21240
Virtual size: 0x3640
Raw size: 0x3640
Section '.reloc' @ 0x00024880
File offset: 0x24880
Virtual size: 0x280
Raw size: 0x280
DxeCore.efi after:
Detected 'X64' type PE/COFF image consisting of 3 sections
Section alignment: 0x40
File alignment: 0x40
Section '.text' @ 0x00000240
File offset: 0x240
Virtual size: 0x1f440
Raw size: 0x1f440
Section '.data' @ 0x0001f680
File offset: 0x1f680
Virtual size: 0x3640
Raw size: 0x3640
Section '.reloc' @ 0x00022cc0
File offset: 0x22cc0
Virtual size: 0x280
Raw size: 0x280
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Added missing dependency of FileExplorerLib, which was causing
build error for ArmVirtXen, due to inclusion of ramdisk support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If PE image has no relocation section, and has not set RELOCS_STRIPPED,
after it is converted to TE image, GenFw will set its relocation section
VirtualAddress to non-zero address, and keep Size value as Zero. MdePkg
BasePeCoffLib applied this rule to get RelocationsStripped attribute. But,
it is missing in BaseTools BasePeCoffLib.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Adds the RAMDisk support to ArmVirtPkg platforms.
This patch actually ports OvmfPkg commit 259d87146b to
ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since ArmVirt.dsc.inc is included in all the ArmVirt dsc files,
move inclusion of AcpiTableDxe.inf to ArmVirt.dsc.inc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Current BaseTools query the BuildOptions not cover the case that use
'COMMON' as CodeBase, while DSC spec allow this usage. This Patch add
support for such 'common.DXE_RUNTIME_DRIVER' as the Scope2 in the query
Condition.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Kurt Kennett <Kurt.Kennett@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current BaseTools cannot generate EFI_FIRMWARE_IMAGE_AUTHENTICATION
for FMP capsule. this patch fix it by FDF spec's update to add the
definition for CERTIFICATE_GUID and MONOTONIC_COUNT. BaseTools call
the tool by CERTIFICATE_GUID to generate the certdata and fill the header
info.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the EFI_FIRMWARE_IMAGE_AUTHENTICATION struct require the AuthInfo which
is a signature across the image data and the Monotonic Count value, so we
add the new option to support Monotonic count.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Provide the PKCS7 Tool to support the CertType - EFI_CERT_TYPE_PKCS7_GUID,
then user can use this tool to add EFI_FIRMWARE_IMAGE_AUTHENTICATION
for a binary.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Zhang, Chao B
Star Zeng
Giri P Mudusuru
Hao Wu
Yonghong Zhu
Jiewen Yao
Leif Lindholm
Jeff Brasen
Jeff Fan
Ruiyu Ni
Zhang Lubo
Ard Biesheuvel
Liming Gao
Yarlagadda, Satya P
Vikas C Sajjan