When building without LTO, gcc incorrectly resolves the hazards for
'PciRegBase’ when inlining, leading to "may be used uninitialized"
warnings (and hence build failure with -Werror).
Eliminate this warning by explicitly initializing the variable to 0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Having a three way conditional with callbacks would make sense if the
callbacks weren't (a) identical and (b) didn't return TRUE all the
time. So get rid of the kludge.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We are switching the Juno platform to the generic host bridge driver,
which involves implementing PciHostBridgeLib for this platform, and
plugging it into MdeModulePkg's PciHostBridgeDxe.inf.
Since the platform descriptions no longer live in upstream EDK2, the
PciHostBridgeLib implementation (which reuses some of the code removed
here) will live there as well. But this PciHostBridgeDxe driver is no
longer used, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ArmJunoDxe driver code registers a callback for the EndOfDxe event,
at which time it does some manipulation of the PCI peripherals on the
board. Given that R0 has no working PCIe, instead of conditionally
performing these operations, omit the registration of the
callback altogether on that platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the open coded reimplementation of 'PCI emulation' with a pair
of calls into NonDiscoverableDeviceRegistrationLib to register the OHCI
and EHCI controllers. These will be picked up by the generic driver instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ArmJunoDxe driver does not actually depend on the deprecated BdsLib
so remove the dependency declaration from the INF file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Marvell Yukon MAC address load supported only on Juno R1 and R2.
It disabled for Juno R0 due to PCI issues on this board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The patch reads a valid MAC address from the Juno IOFPGA registers
and pushes it into onboard Marvell Yukon NIC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniil Egranov <daniil.egranov@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
On ARM systems, mapping normal memory as device memory may have unintended
side effects, given that unaligned accesses or loads and stores with special
semantics (e.g., load/store exclusive) may fault or may not work as expected.
Similarly, DC ZVA instructions are only supported on normal memory, not
device memory.
So remove the EFI_MEMORY_UC attribute that we set by default on system RAM.
If any region requires this attribute, it is up to the driver to set this
attribute, and to ensure that no offending operations are performed on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
While we're at it, replace some inefficient uses of LoadConstantToReg()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that the code to detect the Juno revision is in
the header go ahead and covert the ArmJunoDxe to use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The code to detect what juno revision we are running on
is fairly small put it in a common header where it may be
used in a couple places.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The AXI<->PCIe translation comments are out of date with
respect to the code. In the first case the AXI master port
is incorrectly called a slave. In the second case the the
translation direction indicated for the slave port is the
wrong direction.
Correct both of these comments to reflect what the code is
doing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Juno PIO mapping is 8M, so it should be using a 32-bit
PIO address translation. Further, PIO addresses should start
at 0 and be translated to/from the ARM MMIO region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Juno has several serial ports, one of which may be used for a remote
debug interface (e.g. gdb, WinDbg). The debug serial port needs to
be distinct from that used for UEFI trace to prevent corruption of
debugger protocol messaging.
The UEFI spec requires that serial devices be initialised to default
settings. (11.8 Serial I/O Protocol - "The default attributes for all
UART-style serial device interfaces are: 115,200 baud, ..."
and 17.3.3 EFI Debugport Variable - "These defaults must be used in the
absence of a DEBUGPORT variable...")
This change adds initialization of the serial device reported in the
ACPI DBG2 table. The initialisation is done early in the boot to allow
the possibility of remote debug of UEFI itself.
NOTE: This is functionally dependent on the DBG2 table being updated in
OpenPlatformPkg, but is required as a precursor to that change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PCI related PCDs are not platform specific, and architectural
protocols such as CpuIo2 are based on PCI provided MMIO to IO
translation, so these PCDs belong in ArmPkg not ArmPlatformPkg.
NOTE: this *WILL* break some out-of-tree platforms, the fix is changing
all consumers of gArmPlatformTokenSpaceGuid.PcdPci* to
gArmTokenSpaceGuid.PcdPci*
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Juno .dsc and .fdf files were recently deleted (currently held
in OpenPlatformPkg), but a spurious Makefile for building using it
was left in place. Drop the Makefile to complete the cleanup.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Juno is now managed in OpenPlatformPkg, including the ACPI
tables - so delete this unmaintained copy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file,
called "board.dtb" and the motherboard configuration makes the right
choice about which DTB file gets written as board.dtb in NOR.
The code attempts to select which DTB it should use based on the board
variant or configuration. And this doesn't work because those DTB files
aren't present in NOR flash.
So remove the DTB variants and only load board.dtb.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Code was inserted to create default boot entries for Juno R1. These
don't work, but they are also preventing the board from booting into the
default options that Intel BDS would otherwise boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, Juno exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
We can't remove ArmJuno.dec yet because ACPI still uses it to set the
include path to ArmPlatform.h.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
[2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/Juno
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19240 6f19259b-4bc3-4df7-8a09-765794883524
ArmJunoDxe does not use gArmGlobalVariableGuid so drop the declaration
from the .inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18999 6f19259b-4bc3-4df7-8a09-765794883524
We can remove all mention of ArmPlatformGlobalVariableLib now that
there are no remaining [transitive] dependencies on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18988 6f19259b-4bc3-4df7-8a09-765794883524
The JunoR1 has a GICv2m which is a GICv2 with a little piece of hardware
that has some memory mapped locations that can trigger traditional SPI
interrupts. This allows some basic PCIe MSI capabilities.
Setup the SPI range that is mapped by the MSI window. This range is
described in the JunoR1 SoC TRM, table 3-3. Under Interrupt ID 244-351 is
described as "GICv2m PCI Express MSI". In the future when these tables
are generated programmatically the information may be found in the
MSI_TYPER register as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18723 6f19259b-4bc3-4df7-8a09-765794883524
These patches correct a number of problems with the JUNO ACPI tables.
First, put CCA attributes on the devices which can do DMA. This is
because the linux kernel now requires ARM64 devices specify a coherency
model. Without CCA the devices are unable to perform DMA.
Update the EHCI window to a full 64k as documented in the
Juno Platform SoC TRM. This makes it match the values used in some
other places.
Finally, add some _DSD entries for the SMSC ethernet chip.
The latter changes are required for the mainline kernels to use the adapter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18628 6f19259b-4bc3-4df7-8a09-765794883524
All of AcpiSsdtRootPci.asl and some bits of Gtdt.aslc used LF-only
line separators. Fix before committing new modifications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18627 6f19259b-4bc3-4df7-8a09-765794883524
Currently the MADT signature and revision is mapped to v1.0 macros
which results in MADT with incorrect entries in the header for Juno.
This patch fixes these EFI_ACPI_*_0_MULTIPLE_APIC_DESCRIPTION_TABLE
macros by using appropriate v5.0 versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18572 6f19259b-4bc3-4df7-8a09-765794883524
Remove the ARMGCC and ARMLINUXGCC from comments in the respective
Makefiles of ArmPlatformPkg and ArmJunoPkg. Also drop the wildly
outdated Versatile Express instructions, since they refer to ARMGCC
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18209 6f19259b-4bc3-4df7-8a09-765794883524
No need to hardcode the TE alignment anymore, now that GenFw sets
the PE/COFF alignment according to the alignment requirements of
the ELF input sections.
Also enable FIXED FFS placement so that we can reclaim some of the
space wasted to padding when using clang with 4 KB section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18195 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI .aslc files contain a ReferenceAcpiTable() function whose
sole purpose is to ensure that the table itself does not get optimized
away. However, when using clang, these dummy functions result in a 4 KB
section alignment requirement, which is silly since everything except
the .data section is discarded later anyway.
So instead, make ReferenceAcpiTable a CONST pointer to VOID*. This way,
we still have a .text section, which is mandatory for the PE/COFF
conversion, but no executable code with small model relocations that
impose additional alignment requirements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18194 6f19259b-4bc3-4df7-8a09-765794883524
There are still ARM/AArch64 Linux kernels that do not support EFI Stub.
By using the EFI Linux loader as the default option we can boot any
Linux kernel from UEFI as Linux kernel with EFI stub can also be
booted with the legacy way.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17975 6f19259b-4bc3-4df7-8a09-765794883524
PcdDefaultBootType has been removed when the embedded
Linux Loader has been removed from BdsLib.
The boot arguments (defined by PcdDefaultBootArgument)
are now always targetting EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17971 6f19259b-4bc3-4df7-8a09-765794883524
Add the legacy Linux Loader EFI application to the ARM
development platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17968 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Therefore we can remove Ip4ConfigDxe driver from this build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17911 6f19259b-4bc3-4df7-8a09-765794883524
By default, a MemoryMap() EFI Device Path is created
for the Firmware Volumes.
It means it is difficult to build a Non-Volatile permanent
Device Path for the Firmware Volume as the location in
System Memory may change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17827 6f19259b-4bc3-4df7-8a09-765794883524
The PCI Root bridge is defined by PciRoot(0x0)/Pci(0x0,0x0).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17528 6f19259b-4bc3-4df7-8a09-765794883524
PCI support is only present on Juno R1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17415 6f19259b-4bc3-4df7-8a09-765794883524
We keep UID=0 for the 'real' PCI root complex on the Juno board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17342 6f19259b-4bc3-4df7-8a09-765794883524
PcdOverridePlatformFdt was set with its default value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17306 6f19259b-4bc3-4df7-8a09-765794883524
The Fdt platform driver has been moved at the end of the list
of the DXE/UEFI drivers to ensure the device drivers have been
dispatched prior to load the FDT platform driver.
For instance, if we want to load FDT from TFTP we must have
the ethernet driver to be already loaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17305 6f19259b-4bc3-4df7-8a09-765794883524
Leif Lindholm
Ard Biesheuvel
Daniil Egranov
Daniil Egranov
Jeremy Linton
Evan Lloyd
Ryan Harkin
Star Zeng
Supreeth Venkatesh
Sudeep Holla
Olivier Martin
Ronald Cron
Jiaxin Wu