It provides sample on Platform VTd policy protocol.
This protocol is optional.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It provides AllocateBuffer/FreeBuffer/Map/Unmap function.
It also provides VTd capability yet.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds logic to probe the media change for physical
block devices. So that when media change happens, the BlockIo
is re-installed again.
It fixes the issue when CDROM is removed UEFI Shell still shows
the BlockIo in the output of "map -r".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=644
According to XHCI spec:
4.10.2.1 Stall Error
4.10.2.4 Babble Detected Error
When a device transmits more data on the USB than the host controller
is expecting for a transaction, it is defined to be babbling.
In general, this is called a Babble Error. When a device sends more
data than the TD Transfer Size bytes (TD Babble), unexpected activity
that persists beyond a specified point in a (micro)frame (Frame Babble),
or a packet greater than Max Packet Size (Packet Babble), the host
controller shall set the Babble Detected Error in the Completion Code
field of the TRB, generate an Error Event, and halt the endpoint
(refer to Section 4.10.2.1).
This patch is to also check for EFI_USB_ERR_BABBLE error returned as
a TransferResult and then proceed to XhcRecoverhaltedEndPoint.
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=593
Currently, SmmCommunciate fails in RestoreLockBox after
SmmReadyToLock since COMM buffer is in stack instead of
using SmmCommRegion by gEdkiiPiSmmCommunicationRegionTableGuid.
This patch is to get SmmCommRegion by
gEdkiiPiSmmCommunicationRegionTableGuid for COMM buffer
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
UEFI Spec uses UnRegisterResetNotify in protocol structure
definition but uses UnregisterResetNotify in the function
prototype definition.
By searching the entire spec, Unregister* is used for
SIMPLE_TEXT_INPUT_EX_PROTOCOL.UnregisterKeyNotify(). So choose
to use UnregisterResetNotify for consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the definition, the warn() function takes at least 2 arguments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch add some comments to explain why we use .PrebuildEnv file to
save environment variable settings set by the prebuild script.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdGetSize() returns UINTN data type. The consumer code should use UINTN data
to get its size.
This issue is found when PcdCpuFeaturesSupport is configured as patchable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
UEFI spec 2.6 errata B update Status Codes Returned table of the
EFI_USBFN_IO_PROTOCOL.GetDeviceInfo function as follows:
1. Update EFI_INVALID_PARAMETER description:
Original text:
A parameter is invalid.
New text:
One or more of the following conditions is TRUE:
BufferSize is NULL.
*BufferSize is not 0 and Buffer is NULL.
Id in invalid.
2. Update EFI_BUFFER_TOO_SMALL description:
Original text:
Supplied buffer isn’t large enough to hold the request string.
New text:
The buffer is too small to hold the buffer.
*BufferSize has been updated with the size needed to hold the
request string.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Senter feature could not be a single feature,
it has been merge to Smx feature, so remove it.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Disable CPU feature may return error, add error handling
code to handle it instead of assert it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The patch fixes two kinds of bugs in DxeCore that accesses memory
which might be freed or owned by other modules.
The two bugs don't cause functionality issue.
1. CoreValidateHandle() checks whether the handle is valid by
validating its signature. The proper way is to check whether
the handle is in the handle database.
2. CoreDisconnectControllersUsingProtocolInterface() and
CoreOpenProtocol() de-reference Link pointer which is
already freed. The proper way is to not de-reference the pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
The Hsti returned from InternalHstiFindAip() and temporally
allocated NewHsti need to be freed after used.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The definition for 1.1a has no difference with 1.0.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Adjust FIFO threshold according to FIFO depth. Skip
the adjustment if we do not have FIFO depth info.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some boards may have max clock limitation. Add a Pcd to notify
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ZTE/SanChip version pl011 has different reg offset and bit offset
for some registers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 0df6c8c157 ("BaseTools/tools_def AARCH64: avoid SIMD registers
in XIP code") updated the compiler flags used by AARCH64 when building
modules (including BASE libraries) that may execute before the MMU is
enabled.
This broke the build for OpensslLib/OpensslLibCrypto because the SIMD
register file is shared with the FPU, and since OpenSSL contains some
references to float/double types (which are mostly unused for UEFI btw),
disabling floating point prevents the compiler from building OpenSSL
at all. So for OpensslLib[Crypto], we need to override the XIP CC flags,
to remove the -mgeneral-regs-only compiler flag again.
When introducing the support for XIP CC flags, we were aware that this
would affect BASE libraries as well, but were not expecting this to
have any performance impact. However, in the case of software crypto,
it makes sense not to needlessly inhibit the compiler's ability to
generate fast code, and even if OpenssLib is a BASE library, it is
guaranteed not to run with the MMU off. So omit -mstrict-align from the
local XIP CC flags override as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
XIP code may execute with the MMU off, in which case all memory accesses
should be strictly aligned to their size. Some versions of GCC violate
this restriction even when -mstrict-align is passed, when performing
loads and stores that involve SIMD registers. This is clearly a bug in
the compiler, but we can easily work around it by avoiding SIMD registers
altogether when building code that may execute in such a context. So add
-mgeneral-regs-only to the AARCH64 XIP CC flags.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The AArch64 ABI classifies register x18 as a platform register, which
means it should not be used unless the code is guaranteed to run on a
platform that doesn't use it in such a capacity.
GCC does not honour this requirement by default, and so we need to tell
it not to touch it explicitly, by passing the -ffixed-x18 command line
option.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=625
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add error handling code when initialize the CPU feature failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
NumPages variable was introduced in commit 66c548be50. In this commit
we allocate an intermediate buffer when SEV is enabled. The 'BounceBuffer'
variable points to the intermediate buffer pointer and NumPages variables
stores the number of pages. Later in the code, 'BounceBuffer' variable is
checked to see if we need to free the intermediate buffers. The code looks
correct, suppress the warning.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: s/warnigns/warnings/ in the code comment]
[lersek@redhat.com: add Gerd's Reported-by]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This patch enables PciHostBridgeDxe driver to use Platform IoMMU detection
library to ensure that PciHostBridgeDxe is run after platform IoMmuDxe
driver has checked whether platform need to install IOMMU protocol provider.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled, use a bounce buffer to perform the DMA operation.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Update InternalQemuFwCfgDmaBytes() to work with DMA Access pointer.
The change provides the flexibility to dynamically allocate the "Access"
when SEV is enabled.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled, the DMA must be performed on unencrypted pages.
So when get asked to perfom FWCFG DMA read or write, we allocate a
intermediate (bounce buffer) unencrypted buffer and use this buffer
for DMA read or write.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add SEV specific internal functions which will be used while intergrating
the SEV support into QemuFwCfgLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Current QemuFwCfgLib.inf is used in both Pei and Dxe phases. Add Pei
and Dxe inf file to provide a seperate QemuFwCfgLib instances for Pei
and Dxe phases.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
Due to security reasons all DMA operations inside the SEV guest must
be performed on shared (i.e unencrypted) pages. The IOMMU protocol
driver for the SEV guest uses a bounce buffer to map guest DMA buffer
to shared pages inorder to provide the support for DMA operations inside
SEV guest.
IoMmuDxe driver looks for SEV capabilities, if present then it installs
the real IOMMU protocol otherwise it installs placeholder protocol.
Currently, PciHostBridgeDxe and QemuFWCfgLib need to know the existance
of IOMMU protocol. The modules needing to know the existance of IOMMU
support should add
gEdkiiIoMmuProtocolGuid OR gIoMmuAbsentProtocolGuid
in their depex to ensure that platform IOMMU detection has been performed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Jiewen Yao
Ruiyu Ni
Star Zeng
HuajingLi
Fu Siyuan
Yonghong Zhu
Liming Gao
Eric Dong
Jun Nie
Ard Biesheuvel
Michael Kinney
Brijesh Singh