Some redundant library classes Ppis and GUIDs
have been removed in inf, .c and .h files.
v2:
1.Remove ReadOnlyVariable2.h in S3Resume.c which should be
deleted in last version in which gEfiPeiReadOnlyVariable2PpiGuid
was removed.
2.Remove the library class BaseLib in CpuPageTable.c
which is included elsewhere.
3.Add library classes in SecCore.inf which are removed
at last version.
They are DebugAgentLib and CpuExceptionHandlerLib.
4.Add two Ppis in SecCore.inf which are removed
at last version.
They are gEfiSecPlatformInformationPpiGuid and
gEfiSecPlatformInformation2PpiGuid.
https://bugzilla.tianocore.org/show_bug.cgi?id=1043https://bugzilla.tianocore.org/show_bug.cgi?id=1013https://bugzilla.tianocore.org/show_bug.cgi?id=1032https://bugzilla.tianocore.org/show_bug.cgi?id=1016
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
After admin password reach the TryLimit value, code logic will direct return
error password result no matter which password been inputted. So even correct
user password will return TryLimit error.
Now update code logic to also check user password. Only when both user/admin
password reach the TryLimit count, code will return exceed TryLimit error.
Change-Id: I17fbd1425b77150eb933a5002a1f87a0f0032e9b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Remove two redundant Guids which are not used.
They are gEfiCertTypeRsa2048Sha256Guid and
gEfiCertPkcs7Guid.This is an improved version of
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1182
Some devices can be non removable (such as eMMC) and checking
Present State Register on host controller may falsely return
an information that device is not present. Execute this
check conditionally on the SloType field value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1185
SdMmcHcReset used to set all bits of Software Reset Register to 1
including reserved ones, which on some controllers may result in
timeout.
Now only first bit is set, which means "Software Reset for All".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
currently created for 3 different purposes and saved once.
this makes it created once and saved and then referenced.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
FlexibleFieldName was never used not set.
DefinitionPosition (file and line number) are recalculated
and never used outside the function. remove the saving of the
data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use namedtuple instead of custom class when apropriate
2) rename collections.OrderedDict to OrderedDict since we import it already
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use decorators
2) also change some private functions to public when all callers are
external
3) change external callers to use functions instead of directly
accessing private data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
use decorators and auto cache those that were cached manually
remove properties never used
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Now that Itanium support has been dropped, we can remove the various
occurrences of the ELILO on Itanium PE/COFF header workaround.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=816
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
Fix a regression issue caused by ac4578af36, when there doesn't exist
not used PCD, it also display the not used Pcd section in the report.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1170
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
regression by 15e2022825
and 9f3594782d
Linux execute script must use '\n' not '\r\n' for end of line
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1152
v2: Sync the same logic to Ipv6 and update code comments.
The PXE driver installs a SNP and open this SNP with attribute BY_DRIVER
to avoid it being opened by MNP driver, this SNP is also expected not to
be opened by other drivers with EXCLUSIVE attribute. In some cases, other
drivers may happen to do this by error, and thus cause a system crash.
This patch adds EXCLUSIVE attribute when opening SNP in PXE driver, and
will reject all OpenProtocol requests by EXCLUSIVE.
Cc: Subramanian, Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=1165
InitSmmS3Cr3 () will update SmmS3ResumeState so moving the calling of
it into else block to keep the logic consistency.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=1165
HOB gEfiAcpiVariableGuid is a must have data for S3 resume if
PcdAcpiS3Enable is set to TRUE. Current code in CpuS3.c doesn't
embody this strong binding between them. An error message and
CpuDeadLoop are added in this patch to warn platform developer
about it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1169
Current code checks HeaderType of Function 0 even Function 0 is not
implemented. HeaderType value will be 0xFF if Function 0 is not
implemented, then MaxFunction will be set to PCI_MAX_FUNC + 1.
The code can be optimized to only check HeaderType if Function 0 is
implemented.
Test done:
With this patch, the result is same with the result after the patch at
https://lists.01.org/pipermail/edk2-devel/2018-September/029623.html.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Tomson Chang <tomson.chang@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1169
PCI spec:
They are also required to always implement function 0 in the device.
Implementing other functions is optional and may be assigned in any
order (i.e., a two-function device must respond to function 0 but
can choose any of the other possible function numbers (1-7) for the
second function).
This patch updates ScanPciBus() to not scan other functions if
function 0 is not implemented.
Test done:
Added debug code below in the second loop of ScanPciBus(),
compared the debug logs with and without this patch, many
non-0 unimplemented functions are skipped correctly.
DEBUG ((
DEBUG_INFO,
"%a() B%02xD%02xF%02x VendorId: %04x DeviceId: %04x\n",
__FUNCTION__,
Bus,
Device,
Function,
VendorID,
DeviceID
));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Tomson Chang <tomson.chang@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
GUID C format must conform to {8,4,4,{2,2,2,2,2,2,2,2}}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
This patch align the boolean type PCD value's display in the build
report. Original it may display 0x0, also may use 0 for the same PCD.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is to resolve the lock-up issue if the value of HTTP header
is blank. The issue is recorded @
https://bugzilla.tianocore.org/show_bug.cgi?id=1102.
Cc: Stephen Benjamin <stephen@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Stephen Benjamin <stephen@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2: use "IP & Netmask" directly instead of defining an additional variable.
This patch is to sync the direct route entry setting in both the default
and Instance route table {Subnet, Mask, NextHope} (
https://bugzilla.tianocore.org/show_bug.cgi?id=1143).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The bug is that it cause the RaiseError always be set to TRUE even we
call the function with FALSE parameter.
Cc: Hess Chen <hesheng.chen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Hess Chen <hesheng.chen@intel.com>
Add NmakeSubdirs.py to replace NmakeSubdirs.bat in VS Makefile. This script will
invoke nmake in multi thread mode. It can save more than half time of BaseTools
C clean build.
GCC make supports multiple thread in make phase. So, GNUmakefile doesn't need apply
this script.
single task or job=1:
just single thread and invoke subprocess,subprocess will use
system.stdout to print output.
multi task:
thread number is logic cpu count.All subprocess output will pass to
python script by PIPE and then script print it to system.stdout.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo<dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Test-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If the SkuB's parent SkuA is not in SKUID_IDENTIFIER, then
make SkuB inherit from SkuA as if the SKUID_INDENTIFIER
is ALL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Build tool should report warning if a platform
defines [DefaultStores] but forgets to defined
PcdNvStoreDefaultValueBuffer as PcdsDynamicExVpd in dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the issue that
The Pcd field value is override incorrectly when there
is no Pcd overall value assignment in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is user use 0x1} as a hex value for Pcd, it directly cause
tool report traceback info. This patch add more error info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Today's implementation does an exact device path match to check
whether the device path of a console is in ConIn/ConOut/ErrOut.
But that doesn't work for the USB keyboard.
Because when a platform have multiple USB port, ConIn needs to
carry all device paths corresponding to each port.
Even worse, today's BDS core logic removes the device path from
ConIn/ConOut/ErrOut when the connection to that device path fails.
So if user switches the USB keyboard from one port to another across
boot, the USB keyboard doesn't work in the second boot.
ConPlatform driver solved this problem by adding the
IsHotPlugDevice() function. So that for USB keyboard, ConPlatform
doesn't care whether its device path is in ConIn or not.
But the rule is too loose, and now causes platform BDS cannot control
whether to enable USB keyboard as an active console.
The patch changes ConPlatform to support USB short-form device path
when checking whether the device path of a console is in
ConIn/ConOut/ErrOut.
The logic to always accept USB/PCCARD device as active console is
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1164
The left operand is 64-bit but right operand could be 32-bit.
A typecast is a must because of '~' op before it.
Cc: Hao A Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=1160
There're two parameters which have different name in comment and prototype.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
When build with WinSDK <= Win10 TH2, the terminal over CMD.exe
doesn't work. Because Win10 later than TH2 starts to support VT
terminal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
shenglei
Eric Dong
Marcin Wojtas
Tomasz Michalec
Chasel, Chiu
Carsey, Jaben
Ard Biesheuvel
zhijufan
Yunhua Feng
Jiaxin Wu
edk2-devel-bounces@lists.01.org
Jian J Wang
Star Zeng
Dandan Bi
Chen A Chen
Yonghong Zhu
Dongao Guo
Zhao, ZhiqiangX
Feng, Bob C
Ruiyu Ni