We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marc-André Lureau to have his/her name and email
address displayed properly in the git history.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-19-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Maciej Rabeda to have his/her name and email
address displayed properly in the git history.
Cc: Maciej Rabeda <maciej.rabeda@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-18-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Liming Gao to have his/her name and email
address displayed properly in the git history.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-17-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Laszlo Ersek to have his/her name and email
address displayed properly in the git history.
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-16-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Jim Dailey to have his/her name and email
address displayed properly in the git history.
Cc: Jim Dailey <Jim.Dailey@Dell.com>
Reviewed-by: Jim Dailey <Jim.Dailey@Dell.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-15-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Jiewen Yao to have his/her name and email
address displayed properly in the git history.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-14-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Hot Tian to have his/her name and email address
displayed properly in the git history.
Cc: Hot Tian <hot.tian@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-13-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Hao Wu to have his/her name and email address
displayed properly in the git history.
Cc: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-12-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Erik Bjorge to have his/her name and email
address displayed properly in the git history.
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-11-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Eric Dong to have his/her name and email
address displayed properly in the git history.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-10-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Christopher J Zurcher to have his/her name and
email address displayed properly in the git history.
Cc: Christopher J Zurcher <christopher.j.zurcher@intel.com>
Reviewed-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-9-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Chasel Chiu to have his/her name and email
address displayed properly in the git history.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-8-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Baraneedharan Anbazhagan to have his/her name
and email address displayed properly in the git history.
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-7-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Ashley DeSimone to have his/her name and email
address displayed properly in the git history.
Cc: Ashley DeSimone <ashley.e.desimone@intel.com>
Reviewed-by: Ashley DeSimone <ashley.e.desimone@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-6-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Ard Biesheuvel to have his/her name and email
address displayed properly in the git history.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-5-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Antoine Cœur to have his/her name and email
address displayed properly in the git history.
Cc: Antoine Cœur <coeur@gmx.fr>
Reviewed-by: Antoine Cœur <coeur@gmx.fr>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-4-philmd@redhat.com>
[lersek@redhat.com: fix up valid PatchCheck.py error in Reviewed-by]
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Aaron Li to have his/her name and email address
displayed properly in the git history.
Cc: Aaron Li <aaron.li@intel.com>
Cc: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Aaron Li <aaron.li@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-3-philmd@redhat.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Test: detachable keyboard on Google Pixel Slate now works.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
Use EV_EFI_PLATFORM_FIRMWARE_BLOB2 if the TCG PFP revision is >= 105.
Use FvName as the description for the FV.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
Report EV_EFI_HANDOFF_TABLES2 if the platform chooses PFP >= 105.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
This PCD is to control the TCG PFP spec revision.
The PFP 105 added new event type to support NIST SP800-155,
and deprecated old event type.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
In current implementation, the SMBIOS table is measured multiple
time in every readytoboot event.
This causes Smbios Table record appears multiple time in the TCG event log
and confuses people.
This issue makes it hard to implement 800-155 reference measurement.
This patch closes the event to make sure Smbios is measured only once.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
The TCG2 DXE supports to parse the 800-155 event GUID from PEI
and puts to the beginning of the TCG2 event.
The TCG2 DXE also supports a DXE driver produces 800-155 event
and let TCG2 DXE driver record.
The 800-155 is a NO-ACTION event which does not need extend
anything to TPM2. The TCG2 DXE also supports that.
Multiple 800-155 events are supported. All of them will be put
to the beginning of the TCG2 event, just after the SpecId event.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
The PEIM can produce the 800-155 event and the event
will be recorded to TCG event log by the TCG2 DXE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In SD card voltage switch flow we used to redo the
entire internal clock setup after voltage switch.
Since internal clock has already been setup this
is wasting time on polling the internal clock stable.
This commit changes it to only start the SD clock.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
For eMMC modules we used to notify the platform about frequency
change only after sending CMD13 which meant that platform
might not get a chance to apply required post frequency
change fixes to get the clock stable. To fix this
notification has been moved to SdMmcHcClockSupply function
just after we start the SD clock. During first time setup
the notification won't be sent to avoid changing old behavior.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Former change (9caaa79dd7) missed
PROCEDURE_TOKEN part, this change covers it.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Add PS2 keyboard support.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2316
This patch adds PS2 keyboard support in boot manager, and
add a build flag PS2_KEYBOARD_ENABLE for PS2 keyboard to
build PS2 keyboard driver and SIO driver. Be default the
build flag is not enabled since PS2 keyboard is not common
used. could use -DPS2_KEYBOARD_ENABLE to enable build it
if need this feature.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Previous commits have introduced below fields in structure CPU_AP_DATA:
UINT32 ProcessorSignature;
UINT8 PlatformId;
UINT64 MicrocodeEntryAddr;
which store the information of:
A. CPUID
B. Platform ID
C. Detected microcode patch entry address (including the microcode patch
header)
for each processor within system.
Therefore, the below fields in structure CPU_MP_DATA:
UINT32 ProcessorSignature;
UINT32 ProcessorFlags;
UINT64 MicrocodeDataAddress;
UINT32 MicrocodeRevision;
which store the BSP's information of:
A. CPUID
B. Platform ID
C. The address and revision of detected microcode patch
are redundant and can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The below 2 microcode patch related fields in structure CPU_MP_DATA:
UINT64 MicrocodePatchAddress;
UINT64 MicrocodePatchRegionSize;
They will be passed from PEI phase and be reused DXE phase.
Previously, these 2 fields were placed after some fields with type
'UINTN', this will lead to different field offset in different
architecture for them.
This commit will move them before the fields with different size in
different architecture to ensure they can be properly used in DXE phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will update the MpInitLib to:
A. Collect the base address and size information after microcode patches
being loaded into memory;
B. Collect the detected microcode patch for each processor within system;
C. Based on the collected information, produce the EDKII microcode patch
HOB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will add the definitions for EDKII microcode patch HOB.
The intention of adding this HOB is to provide a scheme to store the below
information:
A. The base address and size of the microcode patches that are being
loaded (from flash) into memory;
B. The information of detected microcode patch for each processor within
the system.
The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
detect and apply of the microcode happen). The consumer of the HOB can be
modules that want to detect/apply the microcode patch by themselves again
later during the boot flow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will attempt to reduce the copy size when loading the
microcode patches data from flash into memory.
Such optimization is done by a pre-process of the microcode patch headers
(on flash). A microcode patch will be loaded into memory only when the
below 3 criteria are met:
A. With a microcode patch header (which means the data is not padding data
between microcode patches);
B. The 'ProcessorSignature' & 'ProcessorFlags' fields in the header match
at least one processor within system;
C. If the Extended Signature Table exists in a microcode patch, the
'ProcessorSignature' & 'ProcessorFlag' fields in the table entries
match at least one processor within system.
Criterion B and C will require all the processors to be woken up once to
collect their CPUID and Platform ID information. Hence, this commit will
move the copy, detect and apply of microcode patch on BSP and APs after
all the processors have been woken up.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will collect the CPUID and Platform ID information for each
processor within system. They will be stored in the CPU_AP_DATA structure.
These information will be used in the next commit to decide whether a
microcode patch will be loaded into memory.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If git finds a '\r' character in the message, then it
converts the entire message content into Quoted-Printable
encoding. It appears that when groups.io converts the QP
encoding back to text format, the '\r' characters somehow
become '\n'. To workaround this, the SetupGit.py script
will now explicitly set the sendemail.transferEncoding git
config option to '8bit'
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The size for the array of mSmmMpSyncData->CpuData[] is 0 ~
mMaxNumberOfCpus -1. But current code may use
mSmmMpSyncData->CpuData[mMaxNumberOfCpus].
This patch fixed this issue.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2268
In current implementation, when check whether APs called by StartUpAllAPs
or StartUpThisAp, it checks the Tokens value used by other APs. Also the AP
will update the Token value for itself if its task finished. In this
case, the potential race condition issues happens for the tokens.
Because of this, system may trig ASSERT during cycling test.
This change enhance the code logic, add new attributes for the token to
remove the reference for the tokens belongs to other APs.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
This issue happens under two conditions.
1. Unicode language environment in Windows
2. Python2 (Not reproducible with Python3)
Step to reproduce
C:\edk2>edksetup.bat forcerebuild
The edksetup.bat stuck at 'nmake cleanall'.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The latest TCG PFP specification (TCG PC Client Platform Firmware Profile
Specification, Revision 1.05) added new data structure. For example,
the SPDM device measurement. This patch adds the new content.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2393
CLANGPDB does not define __GNUC__, but it does define __clang__. Check
for the __clang__ preprocessor definition to use __builtin_offsetof to
implement the OFFSET_OF macro.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Device Control 2 Structure have an issue.
LtrMechanism - there is 2 bits instead of 1.
Signed-off-by: Daniel Pawel Banaszek <daniel.pawel.banaszek@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2395
Errors happened in the arguments parsing is not a critical error.
And it would miss the error status code in the release version of shell.
So replace the ASSERT with returning error status code while fail
parsing command-line in UpdateArgcArgv.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Linson Augustine <linson.augustine@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
In patch set 13c5e34a - 0c3e8e99, we implemented incremental build with
using compiler/pre-processor generate dependent header file function.
A issue is found for MSVC compiler, that the cl.exe /showIncludes
build option generate header file list to either stdout or stderr.
For .c file, the header file list is print out to stdout while for
.vfr, .aslc and .nasm file, the file list is print out to stderr.
The build tool use two threads to process the message from stdout and
stderr, but to generate correct *.deps file, build tool need to
combine the header file list from stderr and other messages from stdout
together with correct time sequence order.
So this patch is trying to combine the stdout and stderr together for
the process which is for calling make program.
The impact of this patch is that the output message of build with -q
will be changed. The compiler error message will not print out.
The build behavior of other log level setting will not be impacted.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Created new email account that will not append legal disclaimers to
my responses/patches.
Switching to NetworkPkg maintainer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2423
That commit 13c5e34a1b introduces the first two UTF-8
characters (the quote ') in an otherwise all-ascii file.
In Conf\tools_def.template
There is tow lines of
Notes: Since this tool chain is obsolete, it doesn't enable
the compiler option for included header file list generation,
we replaces the two offending quotes by proper ascii quotes
The patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2371
This patch is to fix a regression issue that build fails
if multiple build targets given.
Two changes cause this regression issue.
One is AutoGen object __hash__ function only
hash file path and arch, missing ToolChain and build target.
The other is changing the multiple-thread-genfds function as default
build behavior. To generate the genffs command to Makefile, there
is a global data set is used, GenFdsGlobalVariable, which cause build
tool use the data of first build-target build in
the second build-target build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Philippe Mathieu-Daude
MrChromebox
Jiewen Yao
Albecki, Mateusz
Eric Dong
Dong, Guo
Hao A Wu
Desimone, Nathaniel L
Park, Aiden
Alex James
Daniel Pawel Banaszek
Zhichao Gao
Bob Feng
Maciej Rabeda
Fan, Zhiju