The variable TimeOut is actually a retry, not a timeout, so I renamed
the variable accordingly.
This patch makes no functional change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch makes a few minor DEBUG output changes:
- Fix typo in DEBUG output: Negociation->Negotiation
- Change DEBUG occurrences of "Lan9118" to "LAN9118" to make grepping
the log output easier.
- Change the warning that auto-negotiation is not supported when
AutoNegotiate() returns an error.
The function already reports if the feature is supported or not and
can also return an error for other reasons.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a PCD for the link negotiation timeout so the platform can over-ride
the default value.
The code previously did 2000 iterations of the loop with a 2us stall, so
the code has been changed subtly to set the number of iterations equal
to the PCD value divided by the stall time.
Since the stall time has not changed, the default PCD value is set at
4000 so the original behaviour is not changed.
The problems were discovered when the ARM Juno Development Platform used
the "EFI Network" option with then LAN9118 driver. It fails to boot the
first time and so the board drops back to Shell again:
Warning: LAN9118 Driver in stopped state
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
EhcExecTransfer: transfer failed with 2
EhcControlTransfer: error - Device Error, transfer - 2
Buffer: EFI Hard Drive
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
Warning: LAN9118 Driver not initialized
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
Booting EFI Internal Shell
Exiting Shell drops the user back to the Intel BDS UI. Selecting
"Continue" then succeeds in booting from the EFI Network:
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
..MnpFreeTxBuf: Duplicated recycle report from SNP.
MnpFreeTxBuf: Duplicated recycle report from SNP.
[snip repeated errors]
Discussion on the edk2-devel mailing list [1] prompted Laszlo Ersek to
suggest the time taken for the NIC to negotiate was causing a problem.
He suggested the solution contained in this patch to provide a PCD
configurable by the platform.
The default PCD value does not work for Juno. Setting the PCD to a
larger value works for Juno R0, R1 and R2.
[1] http://article.gmane.org/gmane.comp.bios.edk2.devel/7341
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When reviewing my LAN9118 driver PCD patch [1], Ard Biesheuvel noted
that most calls to gBS->Stall() in this driver seem to be used to
prevent timing issues between the device updating data and the host
reading the values. And that replacing most of these calls with a
MemoryFence() would be more robust.
The only exceptions are the stalls that are enclosed inside retry loops:
- in the AutoNegotiate() function.
This stall is waiting for the link to negotiate, which may require
stalling until it is ready.
- in the Lan9118Initialize() function.
These two stalls are waiting for devices and time out after a number
of retries.
- in the SoftReset() function.
This stall is inside a loop where the comment states:
"If time taken exceeds 100us, then there was an error condition"
In these instances, I kept the stall, but also added a MemoryFence().
[1] http://article.gmane.org/gmane.comp.bios.edk2.devel/7389
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Spurious error might appear during network transaction,
ignore them when there are not relevant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18028 6f19259b-4bc3-4df7-8a09-765794883524
UEFI drivers should not depend on TimerLib. They should
use BS.Stall() instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17343 6f19259b-4bc3-4df7-8a09-765794883524
The Lan9118 driver did not recover after a receiver error as the error
handling code stopped the transmitter but did not restart it. Added the
restart of the transmitter.
Added also the restart of the receiver after a transmitter error and
the reactivation of the LEDs after all resets.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17106 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI specification does not require the initialisation and reset
interface to check if an Ethernet cable is connected or not, and provides
the GetStatus() interface to do this. Furthermore, the 'Managed Network
Protocol' take care of the cable connection check in edk2 network stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16326 6f19259b-4bc3-4df7-8a09-765794883524
Correct the setting of the hardware filters according to what it asked
to the driver through the ReceiveFilters() interface function.
Keep track of the hardware settings in the "ReceiveFilterSetting" field of
the EFI_SIMPLE_NETWORK_MODE structure.
From now, after initialization, all filters are disabled and thus no packet
received.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16243 6f19259b-4bc3-4df7-8a09-765794883524
Add or fix checking of the input parameters of the functions that constitute
the EFI_SIMPLE_NETWORK_PROTOCOL interface provided by the LAN9118 driver.
In case of invalid calls, the returned error codes are now compliant with the
UEFI specificationi and the SCT tests checking for those error codes do not
fail anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16239 6f19259b-4bc3-4df7-8a09-765794883524
TxBuff argument is optional in SNP.GetStatus(). This argument can be NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16236 6f19259b-4bc3-4df7-8a09-765794883524
Replace tabs by spaces for indentation to comply to EDK2 coding standards.
Done in files with extension ".S", ".c", ".h", ".asm", ".dsc", ".inc", "*.inf",
"*.dec" or ".fdf" and located in ArmPkg, ArmPlatformPkg, EmbeddedPkg,
BeagleBoardPkg or Omap35xxPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15901 6f19259b-4bc3-4df7-8a09-765794883524
- Make the function PhySoftReset() return EFI_STATUS
- EFI_STATUS was treated as a signed integer by the caller which is not correct.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15630 6f19259b-4bc3-4df7-8a09-765794883524
Ryan Harkin
Ronald Cron
Olivier Martin