The ArmMonitorLib provides an abstract interface to issue
an HyperVisor Call (HVC) or System Monitor Call (SMC) depending
on the default conduit.
The PcdMonitorConduitHvc PCD allows to select the default conduit.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
The ArmMonitorLib provides an abstract interface to issue
an HyperVisor Call (HVC) or System Monitor Call (SMC) depending
on the default conduit.
The PcdMonitorConduitHvc PCD allows to select the default conduit.
The new library relies on the ArmHvcLib and ArmSmcLib libraries.
A Null instance of these libraries can be used for the unused conduit.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Define a PCD 'PcdMonitorConduitHvc' to select the conduit to use for
monitor calls. PcdMonitorConduitHvc is defined as FALSE by default,
meaning the SMC conduit is enabled as default.
Adding PcdMonitorConduitHvc allows selection of HVC conduit to be used
by virtual firmware implementations.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
The NorFlashDxe driver in ArmPlatformPkg was shared between development
platforms built by ARM Ltd, and virtual platforms that were once modeled
after Versatile Express, but have very little in common with actual bare
metal implementations.
Both sides have migrated to a domain specific version of the driver, so
we can retire the old one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4125
EPT-violation #VE should be always on shared memory, which means the
shared bit of the GuestPA should be set. But in current #VE Handler
it is not checked. When it occurs, stop TD immediately and log out
the error.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Guorui Yu <ruogui.ygr@alibaba-inc.com>
Tested-by: Guorui Yu <ruogui.ygr@alibaba-inc.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4136
System will depend on Boot Mode value to do different behavior
Update during Capsule Update process. So UPL need to support
update boot mode.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: VictorX Hsu <victorx.hsu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4114
FSP specification supports input UPD as NULL cases which FSP will
use built-in UPD region instead.
FSP should not return INVALID_PARAMETER in such cases.
In FSP-T entry point case, the valid FSP-T UPD region pointer will be
passed to platform FSP code to consume.
In FSP-M and FSP-S cases, valid UPD pointer will be decided when
updating corresponding pointer field in FspGlobalData.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Ted Kuo <ted.kuo@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3387
Added use of SafeIntLib to validate values are not causing overflows or
underflows in user controlled values when calculating buffer sizes.
Signed-off-by: Miki Demeter <miki.demeter@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4126
Common functions will have either 32bit or 64bit instances which
having different return code size. Function header should support both
scenarios.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
Remove the header files those are already included in
CpuFeatureLib.h.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
This change stripped away the code that can be
shared with other archs or vendors from Intel
implementation and put in to the common file,
leaves the Intel X86 implementation in the
IntelSmmCpuFeatureLib. Also updates the header
file and INF file.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
Rename SmmCpuFeaturesLiCommon.c to
IntelSmmCpuFeaturesLib, because it was developed
specifically for Intel implementation. The code
that can be shared by other archs or vendors
will be stripped away and put in the common
file in the next patch.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4130
Remove TestBaseCryptLibHostAccel.inf and instead use FILE_GUID
override in DSC file to run the same unit test INF against
OpensslLibFull.inf and OpensslLibFullAccel.inf
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Fixes edk2 CI failure due to VM images being updated to Python 3.11
and the old pip modules not being compatible with Python 3.11.
Updates the following pip modules:
- edk2-pytool-library from 0.11.2 to 0.11.6
- edk2-pytool-extensions from 0.16 to 0.19.1
Needed to fix an issue with Python 3.11 compatibility.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4129
Always use the module name with FILE_GUID to generate the host-based
unit test executable image and symbol files. This allows the same
host-based unit test INF file to be used more than once in a single
DSC file with FILE_GUID override. This is valuable when there is a
requirement to run the same host-based unit test with different PCD
settings, library mappings, or build options.
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
After EdkiiMemoryAcceptProtocol is implemented in TdxDxe driver, we can
call it to accept pages in DXE phase.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
Memory usage may exceed the amount accepted at the begining (SEC), TDVF
needs to accept memory dynamically when OUT_OF_RESOURCE occurs.
Another usage is in SetOrClearSharedBit. If a memory region is changed from
shared to private, it must be accepted again.
EdkiiMemoryAcceptProtocol is defined in MdePkg and is implementated /
installed in TdxDxe for Intel TDX memory acceptance.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
EdkiiMemoryAcceptProtocol is defined in MdePkg, the method AcceptMemory()
can be called when memory needs to be accepted.
EdkiiMemoryAcceptProtocol can be installed by architecture-specific
drivers such as TdxDxe. This allows different isolation architectures
to realize their own low-level methods to accept memory.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Jiaqi Gao <jiaqi.gao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
There are below major changes in PlatformInitLib/PlatformPei
1. ProcessHobList
The unaccepted memory is accepted if it is under 4G address.
Please be noted: in current stage, we only accept the memory under 4G.
We will re-visit here in the future when on-demand accept memory is
required.
2. TransferTdxHobList
Transfer the unaccepted memory hob to EFI_RESOURCE_SYSTEM_MEMORY hob
if it is accepted.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
ShellCommandRunMemMap() is updated to handle the case of unaccepted
memory type.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
Unaccepted memory is a kind of new memory type,
CoreInitializeGcdServices() and CoreGetMemoryMap() are updated to handle
the unaccepted memory type.
Ref: microsoft/mu_basecore@97e9c31
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED is defined in MdeModulePkg. The
files which use the definition are updated as well.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED is defined for unaccepted memory.
But this defitinion has not been officially in the PI spec. Base
on the code-first we define EFI_RESOURCE_MEMORY_UNACCEPTED at
MdeModulePkg/Include/Pi/PrePiHob.h and update EFI_RESOURCE_MAX_MEMORY_TYPE
to 8. After BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED is officially published
in PI spec, we will re-visit here.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED is defined for unaccepted memory.
But this defitinion has not been officially in the PI spec. Base
on the code-first we define BZ3937_EFI_RESOURCE_MEMORY_UNACCEPTED at
MdeModulePkg/Include/Pi/PrePiHob.h.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Check the memory block pointer before freeing it.
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Signed-off-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Nickle Wang <nicklew@nvidia.com>
Add myself as reviewer for the DynamicTablesPkg.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ACPI specification updated some terms in accordance with:
s1.1.1 Principle of Inclusive Terminology
Update the PCCT parser accordincly with these new terms.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The following tables can now be generated by the DynamicTablesPkg:
- PCCT
- PPTT
- SRAT
Update the documentation accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
For Pcc address space, the AccessSize field of a Register is
used to delcare the Pcc Subspace Id. This Id can be up to 256.
Cf. ACPI 6.4, s14.7 Referencing the PCC address space
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Platform Communication Channel Table (PCCT) generator collates
the relevant information required for generating a PCCT table from
configuration manager using the configuration manager protocol.
The DynamicTablesManager then install the PCCT table.
From ACPI 6.4, s14 PLATFORM COMMUNICATIONS CHANNEL (PCC):
The platform communication channel (PCC) is a generic mechanism
for OSPM to communicate with an entity in the platform.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the following CmObj in the ArmNameSpaceObjects:
- CM_ARM_MAILBOX_REGISTER_INFO
- CM_ARM_PCC_SUBSPACE_CHANNEL_TIMING_INFO
- CM_ARM_PCC_SUBSPACE_GENERIC_INFO
- CM_ARM_PCC_SUBPSACE_TYPE0_INFO
- CM_ARM_PCC_SUBPSACE_TYPE1_INFO
- CM_ARM_PCC_SUBPSACE_TYPE2_INFO
- CM_ARM_PCC_SUBPSACE_TYPE3_INFO
- CM_ARM_PCC_SUBPSACE_TYPE4_INFO
- CM_ARM_PCC_SUBPSACE_TYPE5_INFO
These objects allow to describe mailbox registers, pcc timings
and PCCT subspaces. They prepare the enablement of a PCCT generator.
Also add the CmObjParsers associated to each object.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The second model of the _PRT object is used. Indeed:
- the interrupts described are not re-configurable
- OSes are aware of the polarity of PCI legacy interrupts,
so there is no need to accurately describe the polarity.
Also, fix a comment for the CM_ARM_PCI_INTERRUPT_MAP_INFO obj.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 13136cc311 ("DynamicTablesPkg: FdtHwInfoParserLib:
Parse Pmu info")
adds support for pmu parsing. Thus, remove the wrong comment.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 691c5f7762 ("DynamicTablesPkg: Deprecate Crs specific methods
in AmlLib")
deprecates some APIs. Finally remove them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add missing fields to the following CmObjParser objects:
- EArmObjGicDInfo
- EArmObjCacheInfo
and fix wrong formatting of:
- EArmObjLpiInfo
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The CmObjParsers of the following objects was inverted, probably
due to a wrong ordering placement in the file defining the structures:
-EArmObjGTBlockTimerFrameInfo
-EArmObjPlatformGTBlockInfo
Assign the correct parser for each object, and re-order the
structures in the file defining them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 0d23c447d6 ("DynamicTablesPkg: Add support to specify FADT
minor revision")
adds new 'MinorRevision' field to CM_STD_OBJ_ACPI_TABLE_INFO.
Reflect the change in this patch to the CmObjectParser.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit de200b7e2c ("DynamicTablesPkg: Update ArmNameSpaceObjects for
IORT Rev E.d")
adds new CmObj structures and fields to the ArmNameSpaceObjects.
Update the CmObjectParser accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add a PrintString to print strings in the CmObjParser.
String must be NULL terminated and no buffer overrun check
is done by this function.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In C, the 'long long' types are 64-bits. The 'll' printf length
specifier should be used to pring these values. Just '%x' allows to
print values that are on 16-bits or more. Use that instead.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4100
ScsiDiskDxe driver updates ControllerNameTable with common string
"SCSI Disk Device" for all SCSI disks. Due to this, when multiple
SCSI disk devices connected, facing difficulty in identifying correct SCSI
disk device. As per SCSI spec, standard Inquiry Data is having the fields
to know Vendor and Product information. Updated "ControllerNameTable" with
Vendor and Product information. So that, device specific name can be
retrieved using ComponentName protocol.
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan Selvaraj <sundaresans@ami.com>
Signed-off-by: Cheripally Gopi <gopic@ami.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Disable/Restore HpetTimer before and after running the Dxe
CpuExceptionHandlerLib unit test module. During the UnitTest, a
new Idt is initialized for the test. There is no handler for timer
intrrupt in this new idt. After the test module, HpetTimer does
not work any more since the comparator value register and main
counter value register for timer does not match. To fix this issue,
disable/restore HpetTimer before and after Unit Test if HpetTimer
driver has been dispatched. We don't need to send Apic Eoi in this
unit test module.When disabling timer, after RaiseTPL(), if there
is a pending timer interrupt, bit64 of Interrupt Request Register
(IRR) will be set to 1 to indicate there is a pending timer
interrupt. After RestoreTPL(), CPU will handle the pending
interrupt in IRR.Then TimerInterruptHandler calls SendApicEoi().
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Migrate to the virt specific NOR flash driver as the ArmPlatformPkg is
going away.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Switch to the virt specific NorFlashDxe driver implementation that was
added recently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
NOR flash emulation under KVM involves switching between two modes,
where array mode is backed by a read-only memslot, and programming mode
is fully emulated, i.e., the memory region is not backed by anything,
and the faulting accesses are forwarded to the VMM by the hypervisor,
which translates them into NOR flash programming commands.
Normally, we are limited to the use of device attributes when mapping
such regions, given that the programming mode has MMIO semantics.
However, when running under KVM, the chosen memory attributes only take
effect when in array mode, since no memory mapping exists otherwise.
This means we can tune the memory mapping so it behaves a bit more like
a ROM, by switching to EFI_MEMORY_WC attributes. This means we no longer
need a special CopyMem() implementation that avoids unaligned accesses
at all cost.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Currently, when dealing with small updates that can be written out
directly (i.e., if they only involve clearing bits and not setting bits,
as the latter requires a block level erase), we iterate over the data
one word at a time, read the old value, compare it, write the new value,
and repeat, unless we encountered a value that we cannot write (0->1
transition), in which case we fall back to a block level operation.
This is inefficient for two reasons:
- reading and writing a word at a time involves switching between array
and programming mode for every word of data, which is
disproportionately costly when running under KVM;
- we end up writing some data twice, as we may not notice that a block
erase is needed until after some data has been written to flash.
So replace this sequence with a single read of up to twice the buffered
write maximum size, followed by one or two buffered writes if the data
can be written directly. Otherwise, fall back to the existing block
level sequence, but without writing out part of the data twice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
NorFlashWriteSingleWord() switches into programming mode and back into
array mode for every single word that it writes. Under KVM, this
involves tearing down the read-only memslot, and setting it up again,
which is costly and unnecessary.
Instead, move the array mode switch into the callers, and only make the
switch when the writing is done.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Pierre Gondois
Sami Mujawar
Ard Biesheuvel
Min M Xu
VictorX Hsu
Sivaparvathi C
Chasel Chiu
Miki Demeter
Abner Chang
Michael D Kinney
Michael Kubacki
Jiaqi Gao
Cheripally Gopi
Tan, Dun