Remove the functions now provided by TimeBaseLib from
PL031RealTimeClockLib. Add TimeBaseLib resolution to ArmVirtPkg
in same commit to prevent breakage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The EBL alternative shell depends indirectly on the deprecated ARM
BdsLib via EblCmdLib, which only uses a single helper function that
can easily be cloned. So clone it, and remove the dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove ArmShellCmdRunAxf's dependency on the deprecated BdsLib by
cloning the ShutdownUefiBootServices() routine into a local source
file; this is the only BdsLib feature 'runaxf' depends on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The InitializeConsolePipe() routine takes care to only set its output
argument *Interface if it is not already set, to prevent overwriting
the ConSplitter interface pointer that may have already been assigned.
However, the associated OUT argument 'Handle' is clobbered by the
subsequent unnecessary LocateDevicePath() invocation, which should
similarly be made dependent on whether *Interface has been set
already.
Reported-by: "Lee, Terry Ping-Chung" <terry.lee@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The entry code in ArmPlatformStackSet () is a 1:1 transliteration of the
ARM version, which uses the callee preserved registers r3 - r7 (*) to
preserve the function arguments and the link register across a call to
ArmPlatformIsPrimaryCore ().
However, x3 - x7 are not callee preserved on AARCH64, and so we should use
registers >= x19 instead. While we're at it, drop an unnecessary preserve
of the link register, and simplify/deobfuscate the calculation of the
secondary stack position.
(*) Note that r3 is not actually a callee saved register even on ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SerialPortInitialize() set the BaudRate variable (type UINT64) as:
BaudRate = (UINTN)FixedPcdGet64 (PcdUartDefaultBaudRate);
This commit fixes a potential problem on ARM 32-bit builds, where the
UINTN type is defined as UINT32, by removing the cast:
BaudRate = FixedPcdGet64 (PcdUartDefaultBaudRate);
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Correct some obviously incorrect comments that have invalid details for
the returned values. (Copy /Paste problem?)
There are no functional changes in this commit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the ACPI 6.0/6.1 spec, the physical base address of GICC,
GICD, GICR and GIC ITS is 64-bit. So change the type of the various GIC
base address PCDs to 64-bit, and fix up all users.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
While we're at it, replace some inefficient uses of LoadConstantToReg(),
and remove the workaround that was added to allow conditional branches
to functions with external linkage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
While we're at it, replace some inefficient uses of LoadConstantToReg()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The RVCT .asm files include AsmMacroIoLib.h only for the definition of
LoadConstantToReg (), which makes it tedious to make change to that file
without the risk of making the RVCT assembler unhappy. So simply replace
LoadConstantToReg() with mov32, which does the right thing in all cases.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
On some platforms the UART clock is not the same for all the serial
ports. The PL011 driver must be capable of handling serial ports with
different clock rates, so must not rely on a PCD for the clock rate.
This patch allows the UART clock rate to be passed as a parameter
to PL011UartInitializePort(), which is called from the serial port
library. This patch also contains the corresponding changes in the
serial port library.
The PCD in Drivers/PL011Uart is replaced by an extra parameter for
PL011UartInitializePort. The PCD is moved to Library/PL011SerialPortLib
to supply the value to pass.
A corresponding patch to ArmVirtPkg is included in the same bundle to
align that with these changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
The PCDs used in the PL011 UART Driver and Serial Port Library are
inherently "fixed at build". This change updates the source to use
Fixed PCDs for these values. This improves clarity and efficiency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
This cosmetic change only tidies things up in preparation for actual
updates. (This reflects responses to a previously submitted patch,
which has been split into several discrete changes.)
There are no functional changes in this commit.
Changes comprise:
Minor corrections to comment typos.
Minor formatting mods.
Expansion of function comments.
Remove OUT from UartBase parameter.
Addition of #define for "magic mumbers".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Since the only reason for keeping a local copy mRT of the gRT pointer
is to be able to call GetVariable/SetVariable at runtime, use the
UefiRuntimeLib helpers instead, so that we can drop mRT altogether.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PL031RealTimeClockLib is a base library that could potentially (although
unlikely) be incorporated into other modules than the DXE_RUNTIME_DRIVER
module that it was intended to complement.
This means the library has no business whatsoever setting the Runtime
Service table pointers directly (since we have no way of knowing which
instance will 'win', and the pointers may end up referring to a module
that is not a DXE_RUNTIME_DRIVER). So remove the assignment altogether.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we don't pick up removable media (USB drives) or storage
devices connected via plug-in cards. Take the sledge hammer approach
for now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19787 6f19259b-4bc3-4df7-8a09-765794883524
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19239 6f19259b-4bc3-4df7-8a09-765794883524
PlatformIntelBdsLib does not use gArmGlobalVariableGuid so drop
the declaration from the .inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19002 6f19259b-4bc3-4df7-8a09-765794883524
EblCmdLib does not use anything that is declared by ArmGlobalVariableHob.h,
so remove the include.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19001 6f19259b-4bc3-4df7-8a09-765794883524
This removes the SEC, PEI and DXE variants of ArmPlatformGlobalVariableLib,
which is no longer used, and should not be used since it violates the PI
spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18990 6f19259b-4bc3-4df7-8a09-765794883524
This removes the PeiServicesTablePointerLib implementation under
ArmPlatformPkg that violates the PI spec, and hence should not be
used. Instead, the implementation that resides under ArmPkg should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18989 6f19259b-4bc3-4df7-8a09-765794883524
This updates the PrePiHobListPointerLib implementation in ArmPlatformPkg
to move away from ArmPlatformGlobalVariableLib and instead use the thread
ID CPU registers (TPIDRURW and TPIDR_EL0 for v7 and v8, respectively)
for storing the HobList pointer.
Since PrePiHobListPointerLib is specific to PrePi (where PEI core is skipped)
we can share these registers with the PEI services table pointer. By the
same reasoning, the PEI services table pointer and the HobList pointer
already shared the same offset in the ArmPlatformGlobalVariable array.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18982 6f19259b-4bc3-4df7-8a09-765794883524
Like the ArmVirtPkg platforms up until SVN r17713, the ArmPlatformPkg
platforms built with the Intel BDS fail to signal the end-of-DXE event
'gEfiEndOfDxeEventGroupGuid' when entering the BDS phase, which results
in some loss of functionality, i.e., variable reclaim in the VariableDxe
drivers, and the splitting of the memory regions that is part of the recently
added UEFI 2.5 properties table feature.
As discussed on the edk2-devel mailing list here:
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16109
it is up to the platform BDS to signal that event, since there may be
platform specific ordering constraints with respect to the signalling
of the event that are difficult to honor at the generic level.
So add the SignalEvent () call to PlatformBdsInit () of ArmPlatformPkg's
PlatformBdsLib implementation for the Intel BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18394 6f19259b-4bc3-4df7-8a09-765794883524
Add a call to EnableQuietBoot () to BdsPlatformPolicyBehavior(),
so that a splash screen is shown in case one is present under the
correct GUID in the FV, and we have graphics support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18377 6f19259b-4bc3-4df7-8a09-765794883524
InitializeConsolePipe () shadowed its own Status variable, and then
clobbered the top one before printing its error message. Instead,
use a NULL check on the LocateProtocol () output argument.
Also clean up coding style on the error path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18376 6f19259b-4bc3-4df7-8a09-765794883524
The Intel BDS platform library still depends on the ARM BDS specific
BdsLib. So replace its invocations with GenericBdsLib counterparts,
and fix up where needed, so that we can drop the dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18375 6f19259b-4bc3-4df7-8a09-765794883524
This change allows to change the top of the System Memory that
was hardcoded by:
FixedPcdGet64 (PcdSystemMemoryBase) + FixedPcdGet64 (PcdSystemMemorySize)
It allows to add support when the Trusted Firmware reserves the
top of the System Memory as Trusted. The size of this region
might not be known in advance.
Note: The reason why the start of the System Memory has not been
made dynamic is because the early code calculates where to place
the stack from the top of the System Memory.
So there is no need to make the start of the System Memory a
dynamic value at the early stage of the boot phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17835 6f19259b-4bc3-4df7-8a09-765794883524
1. Data type for GcdMemoryType and GcdIoType is enumeration type
rather than bit field, so we need to use strict equation "=="
instead of bit-and "&";
2. Testing for GcdIoType should use EfiGcdIoType*** constants
rather than EfiGcdMemoryType***;
3. As we are going to use strict equation, it is clearer to use
switch-case than if-else.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17527 6f19259b-4bc3-4df7-8a09-765794883524
Other libraries/modules could use it (eg: EFI Shell command `runaxf`).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17297 6f19259b-4bc3-4df7-8a09-765794883524
This is a copy/paste of the exact same code in both cases: Buffer
should only be freed on the success path, otherwise it will be
NULL
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17078 6f19259b-4bc3-4df7-8a09-765794883524
This moves the reference to gArmTokenSpaceGuid.PcdFdBaseAddress
from the [FixedPcd] to the [Pcd] section in the INF file of
PrePiArmPlatformGlobalVariableLib so that its users may choose
to use a patchable PCD instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16955 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16325 6f19259b-4bc3-4df7-8a09-765794883524
Rework the PL011UartGetControl() function removing a TODO by the way.
Update of the header comment blocks of (PL011Uart|SerialPort)GetControl() functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16252 6f19259b-4bc3-4df7-8a09-765794883524
Rework of PL011UartSetControl() as a consequence as well as update of
function header comment blocks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16251 6f19259b-4bc3-4df7-8a09-765794883524
Use the command to load and start a ARM Executable File from mass storage.
This is basically just an ELF file. The program is copied to memory and
the Entrypoint is called. Control is not expected to return back to the
Shell. This has only been tested on AArch64 with a limited set of AXF
binaries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16247 6f19259b-4bc3-4df7-8a09-765794883524
Some platforms do not have SysConfig controller used by the ARM
Versatile Express.
Some peripheral drivers currently rely on SysConfigLib (eg: PL031
RTC driver, LCD driver).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16143 6f19259b-4bc3-4df7-8a09-765794883524
This library accesses SystemTable->RuntimeServices at runtime,
which means it should take care to use its updated value after
SetVirtualAddressMap () is called.
Replace references to gRT with mRT, which we initialize to gRT
and update to its virtual value on a virtual address change event.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16091 6f19259b-4bc3-4df7-8a09-765794883524
This changes the definition and a bunch of references to
gArmTokenSpaceGuid.PcdSystemMemoryBase and
gArmTokenSpaceGuid.PcdSystemMemorySize so they can be declared as dynamic PCDs
by the platform. Also, move the non-SEC call to
ArmPlatformInitializeSystemMemory() earlier, so a platform has a chance to set
these PCDs before they are first referenced.
The purpose is allowing dynamically instantiated virtual machines to declare
the system memory by passing a device tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16079 6f19259b-4bc3-4df7-8a09-765794883524
This PCD has been replaced by ArmPlatformIsPrimaryCore() function.
Althrough this PCD is still used in some occasions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16026 6f19259b-4bc3-4df7-8a09-765794883524