Updates to Driver1 profile commands response output.
Updating Driver1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16727 6f19259b-4bc3-4df7-8a09-765794883524
1. Updates to the general command response output.
2. Re-wording some of common shell messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16725 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
This was copied from MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16723 6f19259b-4bc3-4df7-8a09-765794883524
This was copied from MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16722 6f19259b-4bc3-4df7-8a09-765794883524
This was copied from MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16721 6f19259b-4bc3-4df7-8a09-765794883524
The code left behind in Qemu.c has some PCAT dependencies, and might
not be able to build on all platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16696 6f19259b-4bc3-4df7-8a09-765794883524
Roughly, there are two ways to "measure ticks" in UEFI:
- the SetTimer() boot service, which sets up a one-shot or periodic event
callback, and takes the interval length in units of 100ns,
- the Stall() boot service, which stalls the caller (but does not yield
the CPU) for the interval specified. The interval is taken as a number
of microseconds.
If the platform in question also follows the PI (Platform Init)
specification, then it is recommended to implement the above UEFI services
on top of the following DXE Architectural Protocols (described in PI
Volume 2):
- Timer Architectural Protocol:
"Used to set up a periodic timer interrupt using a platform specific
timer, and a processor-specific interrupt vector. This protocol enables
the use of the SetTimer() Boot Service. [...]"
- Metronome Architectural Protocol:
"Used to wait for ticks from a known time source in a platform. This
protocol may be used to implement a simple version of the Stall() Boot
Service. [...]"
Edk2 in general, and ArmVirtualizationQemu in particular, follow the above
pattern.
SetTimer() works correctly. The underlying Timer Architectural Protocol is
provided by "ArmPkg/Drivers/TimerDxe", and that driver calls the internal
function ArmGenericTimerGetTimerFreq() to retrieve the timer frequency.
Ultimately it boils down to reading the CNTFRQ_EL0 register.
The correct behavior of SetTimer() can be observed for example:
- in the grub-efi countdown ("grub-core/kern/arm/efi/init.c"),
- in the Intel BDS front page countdown
("IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c").
However, Stall() doesn't work correctly. The underlying Metronome
Architectural Protocol is provided by "EmbeddedPkg/MetronomeDxe", which
further delegates the job to the TimerLib library class. That in turn is
resolved to the "ArmPkg/Library/ArmArchTimerLib" instance, which
(finally!) takes the timer frequency from "PcdArmArchTimerFreqInHz".
In ArmVirtualizationQemu we currently specify 100MHz for this PCD. Alas,
that's incorect for:
- both QEMU/TCG (which emulates 62.5MHz, see GTIMER_SCALE in
"target-arm/internals.h"),
- and KVM (where the host's virtualized timer can tick at 50 MHz, for
example).
Set the PCD to 0, asking ArmArchTimerLib to interrogate CNTFRQ_EL0 as
well.
The change can be tested with eg. the following callers of Stall():
- the UEFI Shell's countdown -- before it runs "startup.nsh" -- relies on
Stall(),
- the UEFI shell command "stall" also uses Stall(). (Time it with a
stopwatch.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16692 6f19259b-4bc3-4df7-8a09-765794883524
Allow a platform to set PcdArmArchTimerFreqInHz to zero, and consider it a
request to use the actual timer frequency.
No global variable is introduced, so that the library can be used in PEIMs
that execute from flash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16691 6f19259b-4bc3-4df7-8a09-765794883524
for trying to reclaim variable space at EndOfDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16688 6f19259b-4bc3-4df7-8a09-765794883524
for trying to reclaim variable space at EndOfDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16687 6f19259b-4bc3-4df7-8a09-765794883524
And leave the variable error flag in NV flash as the last boot variable error flag.
After EndOfDxe in InitializeVarErrorFlag (), the variable error flag in NV flash
will be initialized to this local current boot variable error flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16686 6f19259b-4bc3-4df7-8a09-765794883524
And leave the variable error flag in NV flash as the last boot variable error flag.
After EndOfDxe in InitializeVarErrorFlag (), the variable error flag in NV flash
will be initialized to this local current boot variable error flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16685 6f19259b-4bc3-4df7-8a09-765794883524
And leave the variable error flag in NV flash as the last boot variable error flag.
After EndOfDxe in InitializeVarErrorFlag (), the variable error flag in NV flash
will be initialized to this local current boot variable error flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16684 6f19259b-4bc3-4df7-8a09-765794883524
The override fixed Showing IPv4 and IPv6 string format as
"EFI Network <MAC Address><IP version>" in Boot Manager Group under BIOS setup.
This override will be removed after core fixing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shifei Lu <shifeix.a.lu@intel.com>
Reviewed-by: Tim He <tim.he@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16675 6f19259b-4bc3-4df7-8a09-765794883524
Align the overrider with EDK2 trunk.(The override fixed default console text color)
This override will be removed after core fixing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shifei Lu <shifeix.a.lu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16671 6f19259b-4bc3-4df7-8a09-765794883524
when pressed hot key to enter BIOS setup.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shifei Lu <shifeix.a.lu@intel.com>
Reviewed-by: Tim He <tim.he@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16666 6f19259b-4bc3-4df7-8a09-765794883524
Modify DxeMain.c which displays incorrect debug message regarding FV Hob.
Specifically, the BaseAddress and Length are not related to the same FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16660 6f19259b-4bc3-4df7-8a09-765794883524
The code in AcpiTableDxe handles the installation of FADT and FACS in both
possible orders. In the [FADT, FACS] installation order, the FACS is at
once linked into the FADT. In the [FACS, FADT] installation order, the
FACS is stashed temporarily, and it is linked into the FADT when the FADT
is installed later.
According to the ACPI specification, *at most one* of FADT.FirmwareCtrl
and FADT.XFirmwareCtrl may be nonzero. The code is aware of this
requirement, and it never sets both of them to nonzero values at once.
However, the code doesn't expect the following:
- The caller first installs the FACS, which is stashed. The address that
is saved happens to fall below 4GB.
- The caller then installs a FADT, with a zero FirmwareCtrl field, and a
nonzero (pre-populated) XFirmwareCtrl field.
In this case the code sets FADT.FirmwareCtrl to the less-than-4GB address
of the stashed FACS, and leaves the different nonzero value in
FADT.XFirmwareCtrl. This violates the ACPI specification.
Prevent this by always zeroing the field that we do *not* set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16659 6f19259b-4bc3-4df7-8a09-765794883524
Fix the Windows MNW2 build by updating the library paths and adding support for VS2012 and VS2013.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce.cran@gmail.com>
Reviewed-by: David Wei <david.wei@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16657 6f19259b-4bc3-4df7-8a09-765794883524
pl011 releases earlier than r1p5 has a fifo depth of 16 bytes, whereas
version r1p5 upwards has a fifo depth of 32 bytes. The pl011 driver was
hardwired to 32 byte depth, causing dropped characters on some platforms
(including default settings on FVP Base and Foundation models).
Update driver to select 16 or 32 on port initialization by checking the
component revision.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16656 6f19259b-4bc3-4df7-8a09-765794883524
Fix the check to prevent any reading past the end of the nor flash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16655 6f19259b-4bc3-4df7-8a09-765794883524
Tapan Shah
Jordan Justen
Jaben Carsey
Ruiyu Ni
Roy Franz
Laszlo Ersek
Yao, Jiewen
Star Zeng
Qiu Shumin
Eric Dong
David Wei
Shifei Lu
Mang Guo
Feng Tian
Hao Wu
Bruce Cran
Leif Lindholm
Ronald Cron
Olivier Martin