Current implementation only exchanges the APIC ID and BIST, this updating is to
exchange all CPU data.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19085 6f19259b-4bc3-4df7-8a09-765794883524
So that we can use write-protection for code later.
It is REPOST.
It includes suggestion from Michael Kinney <michael.d.kinney@intel.com>:
- "For IA32 assembly, can we combine into a single OR instruction that
sets both page enable and WP?"
- "For X64, does it make sense to use single OR instruction instead of 2
BTS instructions as well?"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19068 6f19259b-4bc3-4df7-8a09-765794883524
So that we can use write-protection for code later.
This is REPOST.
It includes the bug fix from "Paolo Bonzini" <pbonzini@redhat.com>:
Title: fix generation of 32-bit PAE page tables
"Bits 1 and 2 are reserved in 32-bit PAE Page Directory Pointer Table
Entries (PDPTEs); see Table 4-8 in the SDM. With VMX extended page
tables, the processor notices and fails the VM entry as soon as CR0.PG
is set to 1."
And thanks "Laszlo Ersek" <lersek@redhat.com> to validate the fix.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Signed-off-by: "Paolo Bonzini" <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19067 6f19259b-4bc3-4df7-8a09-765794883524
SmmCpuFeaturesCompleteSmmReadyToLock() is a hook point to
allow CPU specific code to do more registers setting after
the gEfiSmmReadyToLockProtocolGuid notification is completely
processed.
SmmCpuFeaturesAllocatePageTableMemory() is an API to allow
CPU to allocate a specific region for storing page tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18979 6f19259b-4bc3-4df7-8a09-765794883524
Always set RW+P bit for page table by default.
So that we can use write-protection for code later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18960 6f19259b-4bc3-4df7-8a09-765794883524
Add NULL func for 2 new APIs in SmmCpuFeaturesLib.
SmmCpuFeaturesCompleteSmmReadyToLock() is a hook point to allow
CPU specific code to do more registers setting after
the gEfiSmmReadyToLockProtocolGuid notification is completely processed.
Add SmmCpuFeaturesCompleteSmmReadyToLock() to PerformRemainingTasks() and PerformPreTasks().
SmmCpuFeaturesAllocatePageTableMemory() is an API to allow
CPU to allocate a specific region for storing page tables.
All page table allocation will use AllocatePageTableMemory().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18958 6f19259b-4bc3-4df7-8a09-765794883524
We had better separate code from data in tile in page level,
so that other program may use page level protection on that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18957 6f19259b-4bc3-4df7-8a09-765794883524
This module initializes the ACPI_CPU_DATA structure and registers the
address of this structure in the PcdCpuS3DataAddress PCD. This is a
generic/simple version of this module. It does not provide a machine
check handler or CPU register initialization tables for ACPI S3 resume.
It also only supports the number of CPUs reported by the MP Services
Protocol, so this module does not support hot plug CPUs. This module
can be copied into a CPU specific package and customized if these
additional features are required.
This patch series is in response to the OvmfPkg patch series from
Laszlo Ersek that enables SMM on OVMF. The v4 version of the patch
series from Laszlo includes an OVMF specific CPU module to initialize
the ACPI_CPU_DATA structure.
This proposed patch series replaces the patches listed below.
[PATCH v4 27/41] OvmfPkg:
add skeleton QuarkPort/CpuS3DataDxe
[PATCH v4 28/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.StartupVector
[PATCH v4 29/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle IDT, GDT and MCE in ACPI_CPU_DATA
[PATCH v4 30/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle StackAddress and StackSize
[PATCH v4 31/41] OvmfPkg:
import CpuConfigLib header from Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg
[PATCH v4 32/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.NumberOfCpus
[PATCH v4 33/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.MtrrTable
[PATCH v4 34/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle register tables in ACPI_CPU_DATA
[PATCH v4 35/41] OvmfPkg:
port CpuS3DataDxe to X64
patch originally authored by Paolo Bonzini
[PATCH v4 36/41] OvmfPkg:
build QuarkPort/CpuS3DataDxe for -D SMM_REQUIRE
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18951 6f19259b-4bc3-4df7-8a09-765794883524
Provide a more detailed description of each field of the
ACPI_CPU_DATA and CPU_REGISTER_TABLE structures.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18950 6f19259b-4bc3-4df7-8a09-765794883524
SmmDebug feature is implemented in ASM, which is not easy to maintain.
So we move it to C function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18946 6f19259b-4bc3-4df7-8a09-765794883524
In this way, we can centralize the silicon configuration in
PerformRemainingTasks()/PerformPreTasks() function.
If there are more features need to be configured, they can put in
PerformRemainingTasks()/PerformPreTasks() only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18938 6f19259b-4bc3-4df7-8a09-765794883524
Move Gdt initialization from InitializeMpServiceData() to CPU Arch specific function.
We create SmmFuncsArch.c for hold CPU specific function, so that
EFI_IMAGE_MACHINE_TYPE_SUPPORTED(EFI_IMAGE_MACHINE_X64) can be removed.
For IA32 version, we always allocate new page for GDT entry, for easy maintenance.
For X64 version, we fixed TssBase in GDT entry to make sure TSS data is correct.
Remove TSS fixup for GDT in ASM file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18937 6f19259b-4bc3-4df7-8a09-765794883524
TSS segment should use (SIZE - 1) as limit, and do not set G bit (highest bit of LimitHigh) because limit means byte count.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18935 6f19259b-4bc3-4df7-8a09-765794883524
If x2APIC flag is set, enable x2APIC mode on all APs and BSP. Before we wakeup
APs to enable x2APIC mode, we should wait all APs have finished initialization.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18934 6f19259b-4bc3-4df7-8a09-765794883524
If there are any logical processor reporting an APIC ID of 255 or greater, set
X2ApicEnable flag.
GetInitialApicId() will return x2APIC ID if CPUID leaf B supported.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18933 6f19259b-4bc3-4df7-8a09-765794883524
The CpuDxe driver may run before the gEfiMetronomeArchProtocolGuid
protocol is installed. gBS->Stall does not work until this arch
protocol is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18914 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
We need to check if SmmFeatureControl support or not by checking
SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP.
Because MSR_SMM_MCA_CAP is SMM-RO register, we should move this check from
SmmCpuFeaturesLibConstructor (non-SMM) to SmmCpuFeaturesInitializeProcessor
(SMM).
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18906 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18905 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module is using PcdFrameworkCompatibilitySupport to
provide compatibility with the SMM support in the IntelFrameworkPkg.
This change removes the Framework compatibility and requires all SMM
modules that provide SMI handlers to follow the PI Specification.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18726 6f19259b-4bc3-4df7-8a09-765794883524
In ConfigSmmCodeAccessCheck(), we used gSmst->CurrentlyExecutingCpu to get the
current SMM BSP. But ConfigSmmCodeAccessCheck() maybe invoked before executing
SmmCoreEntry() and gSmst->CurrentlyExecutingCpu hasn't been updated to the
latest value. The code flow is as below:
BSPHandler()
gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu = CpuIndex;
//
// when mRestoreSmmConfigurationInS3 is set:
//
ConfigSmmCodeAccessCheck()
//
// reads gSmst->CurrentlyExecutingCpu to early
//
gSmmCpuPrivate->SmmCoreEntry (&gSmmCpuPrivate->SmmCoreEntryContext)
//
// sets gSmst->CurrentlyExecutingCpu with CopyMem() too late
//
CopyMem (&gSmmCoreSmst.SmmStartupThisAp,
SmmEntryContext, sizeof (EFI_SMM_ENTRY_CONTEXT));
Instead, we should use
gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18715 6f19259b-4bc3-4df7-8a09-765794883524
The LocalApicLib does not provide a function to manage the state of the
Local APIC SoftwareEnable bit in the Spurious Vector register. There
are cases where this bit needs to be managed without side effects to.
other Local APIC registers. One use case is in the DebugAgent in the
SourceLevelDebugPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18711 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module makes some assumptions about GDT selectors
that are based on the GDT layout from the DxeIplPeim. For example,
the protected mode entry code and (where appropriate) the long mode
entry code in the UefiCpuPkg/PiSmmCpuDxeSmm/*/MpFuncs.* assembly
files, which are used during S3 resume, open-code segment selector
values that depend on DxeIplPeim's GDT layout.
This updates the CpuDxe module to use the same GDT layout as the
DxeIplPeim. This enables modules that are dispatched after
CpuDxe to find, and potentially save and restore, a GDT layout that
matches that of DxeIplPeim. The DxeIplPeim has a 2 GDT entries for
data selectors that are identical. These are LINEAR_SEL (GDT Offset
0x08)and LINEAR_DATA64_SEL (GDT offset 0x30). LINEAL_SEL is used for
for IA32 DXE and the LINEAR_DATA64_SEL is used for X64 DXE. This
duplicate data selector was added to the CpuDxe module to keep the
GDT and all selectors consistent.
Using a consistent GDT also improves debug experience.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3568
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18710 6f19259b-4bc3-4df7-8a09-765794883524
Add support for the reading and writing MSR_SMM_FEATURE_CONTROL
through the SmmCpuFeaturesIsSmmRegisterSupported(),
SmmCpuFeaturesGetSmmRegister(), and SmmCpuFeaturesSetSmmRegister()
functions. This MSR is supported if the Family/Model is 06_3C,
06_45, or 06_46.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18690 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about
whether the set operation is successful or not. PcdSet##S were added to
return error status and PcdSet## APIs were put in ifndef
DISABLE_NEW_DEPRECATED_INTERFACES condition. To adopt PcdSet##S and
further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined,
we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii
PCD set failure is a legal case. So for DynamicDefault, we add assert
when set failure. For DynamicHii, we add logic to handle it.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18686 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module does not use any services from the SmmLib.
This change removes the SmmLib from PiSmmCpuDxeSmm module and also
removes the lib mapping in the UefiCpuPkg DSC file because no other
modules in the UefiCpuPkg use the SmmLib.
Removal of SmmLib is now possible because the only API call to it,
ClearSmi(), was ultimately removed from PiSmmCpuDxeSmm -- see the
"BUGBUG" comment in git commit 529a5a86.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18673 6f19259b-4bc3-4df7-8a09-765794883524
Add the PiSmmCpuDxeSmm module to the UefiCpuPkg DSC file along
with this modules dependent libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18648 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18647 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18646 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
Changes between [PATCH v1] and [PATCH v2]:
1) Swap PTE init order for QEMU compatibility.
Current PTE initialization algorithm works on HW but breaks QEMU
emulator. Update the PTE initialization order to be compatible
with both.
2) Update comment block that describes 32KB SMBASE alignment requirement
to match contents of Intel(R) 64 and IA-32 Architectures Software
Developer's Manual
3) Remove BUGBUG comment and call to ClearSmi() that is not required.
SMI should be cleared by root SMI handler.
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
[pbonzini@redhat.com: InitPaging: prepare PT before filling in PDE]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18645 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuHotPlugData.h that defines a data structure that is shared between
modules and is required for to support hot plug CPUs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18643 6f19259b-4bc3-4df7-8a09-765794883524
Add AcpuCpuData.h that defines a data structure that is shared between
modules and is required for ACPI S3 support.
APState field removed between V1 and V2 patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18642 6f19259b-4bc3-4df7-8a09-765794883524
Add SmramSaveStateMap.h file that defines the 32-bit and 64-bit CPU
SMRAM Save State Map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18641 6f19259b-4bc3-4df7-8a09-765794883524
Add definition of the SMM CPU Service Protocol that is produced by
the PiSmmCpuDxeSmm module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18640 6f19259b-4bc3-4df7-8a09-765794883524
Add SmmCpuPlatformHookLib that provides platform specific functions
that are used to initialize SMM and process SMIs. A Null instance
of this library is provided that should work for most platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18639 6f19259b-4bc3-4df7-8a09-765794883524
Add SmmCpuFeaturesLib that provides CPU specific functions that are
used to initialize SMM and process SMIs. A functional implementation
of this library class is provided that is based on the
Intel(R) 64 and IA-32 Architectures Software Developer's Manual
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18638 6f19259b-4bc3-4df7-8a09-765794883524
Add declaration of PlatformSecLib library class to DEC file
Add declaration of PcdPeiTemporaryRamStackSize PCD to DEC/UNI file
Add build of PlatformSecLibNull to DSC file
Add build of SecCore to DSC file
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18637 6f19259b-4bc3-4df7-8a09-765794883524
Add SecCore module that uses the PlatformSecLib class for platform
specific actions. The SecCore module also uses a new PCD to
configure the size of the stack used in the SEC phase. If the
stack size PCD is set to 0, the stack is configured to use half
of the available temporary RAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18636 6f19259b-4bc3-4df7-8a09-765794883524
Add PlatformSecLib class and PlatformSecLibNull instance
that is used by the SecCore. PlatformSecLibNull should
not be used in a platform build. Instead, it should be
used as a template for implementing a platform specific
instance of the PlatformSecLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18635 6f19259b-4bc3-4df7-8a09-765794883524
Add modules that produce the SMM Communications PPI and
install a SW SMI handler for SMM Communication requests
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18634 6f19259b-4bc3-4df7-8a09-765794883524
Move CPUID related defines from LocalApic.h to Cpuid.h
Update LocalApicLib instances to include Cpuid.h
Update CpuMpPei module to include Cpuid.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18633 6f19259b-4bc3-4df7-8a09-765794883524
The Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuArchDxe
driver applies any MTRR changes to APs, if the
EFI_MP_SERVICES_PROTOCOL is available. We should do the same.
Additionally, the broadcast should occur at MP startup as well,
not only when MTRR settings are changed. The inspiration is
taken from
Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuMpDxe/
(see the EarlyMpInit() function and its call sites in
"ProcessorConfig.c").
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18632 6f19259b-4bc3-4df7-8a09-765794883524
Address a race condition in first call to StartupAllAPs() with
SingleThread set to TRUE in the MP initialization. If the APs
have not entered their idle loop before StartupAllAPs() is called,
then some of the APs will be in an unexpected state, and
StartupAllAPs() will hang. This is the hang condition that is
only seen when SingleThread parameter is set to TRUE and
StartupAllAPs() is called very shortly after mAPsAlreadyInitFinished
is set to TRUE that releases the APs to complete their initialization.
An internal function has been added to check if all APs are in the
sleeping state in their idle loop. On the first call to
StartupAllAPs(), this internal function is used in a loop to make
sure the APs are in a state that is compatible with the use of
StartupAllAPs(). PcdCpuApInitTimeOutInMicroSeconds is used as the
maximum wait time for the APs to enter their idle loop. If all
APs have not entered their idle loop within the timeout, then
an ASSERT() is generated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18631 6f19259b-4bc3-4df7-8a09-765794883524
Use PcdCpuApInitTimeOutInMicroSeconds instead of hardcoded 100ms for
the time to wait for all APs to respond to first INIT SIPI SIPI
wake request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18630 6f19259b-4bc3-4df7-8a09-765794883524
Only perform AP detection if PcdCpuMaxLogicalProcessorNumber > 1
Only free AP related structures of they were allocated
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18629 6f19259b-4bc3-4df7-8a09-765794883524
Add an ASSERT in GetApicTimerState() to check if the local APIC is
software enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18595 6f19259b-4bc3-4df7-8a09-765794883524
When the local APIC is not configurated properly, function
GetApicTimerInitCount() in LocalApicLib may return zero, which will lead
to a divide by zero exception in SecPeiDxeTimerLibUefiCpu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18594 6f19259b-4bc3-4df7-8a09-765794883524
CpuData buffer should be located in allocated buffer instead of at end of
WakeupBuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18550 6f19259b-4bc3-4df7-8a09-765794883524
Per IA32 SDM, if CPUID.80000008H is not available, software may assume that the
processor supports a 36-bit physical address size.
However, for such old processors (For example, Quark processor),
MtrrValidBitsMask and MtrrValidAddressMask values are reverted and wrong in
MtrrLib. MtrrValidBitsMask should be 0xFFFFFFFFFULL and MtrrValidAddressMask
should be 0xFFFFFF000ULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18396 6f19259b-4bc3-4df7-8a09-765794883524
CPU Healthy state maybe changed by software. We should return Healthy state
from Healthy bit instead of from CPU BIST hardware information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18374 6f19259b-4bc3-4df7-8a09-765794883524
when stack NX has been enabled for BSP.
DxeIpl may have enabled Execute Disable for BSP,
APs need to get the status and sync up the settings,
otherwise EFI_MP_SERVICES_PROTOCOL->StartupAllAPs
may not work.
Got positive comments and test result from Laszlo
for the early draft patch, thanks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18191 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuMpEndOfPeiCallback () to restore wakeup buffer data on S3 path and flag
flag wakeup buffer to be un-used type on normal boot path. Set one EndOfPei
flag save/restore wakeup buffer when wakeup APs every time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18014 6f19259b-4bc3-4df7-8a09-765794883524
Add AsmHltLoop () in assembly code, it will not be copied into AP wakeup
buffer and invoked at end of ApCFunction (). To make sure AP work in case
AP wakeup buffer is restored to original data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18013 6f19259b-4bc3-4df7-8a09-765794883524
Get CPU BIST information from SEC Platform Information(2) PPIs and update them
accordingly. Install(Reinstall) SEC Platform Information2 PPI to published the
new CPU BIST.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18004 6f19259b-4bc3-4df7-8a09-765794883524
Add DetectMicrocode() to load microcode on BSP and APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18002 6f19259b-4bc3-4df7-8a09-765794883524
Add PCDs PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize that
are used to detect microcode patch from microcode region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18000 6f19259b-4bc3-4df7-8a09-765794883524
BSP will send broadcast INIT Startup IPI to all APs and collect APs count and
BIST information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17997 6f19259b-4bc3-4df7-8a09-765794883524
This PCD is used to specify timeout value for BSP to detect all APs for the
first time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17996 6f19259b-4bc3-4df7-8a09-765794883524
Get AP wakeup buffer and copy AP reset code into it. Allocate APs' stack and CPU
MP data buffer. Fill CPU MP data fields accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17995 6f19259b-4bc3-4df7-8a09-765794883524
Invoke InitializeFloatingPointUnits() to initialize FPU per UEFI specification
before call C function in assembly code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17993 6f19259b-4bc3-4df7-8a09-765794883524
Search memory resource HOB list to find one available system memory under 1MB
for AP reset code and exchange information between BSP and APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17989 6f19259b-4bc3-4df7-8a09-765794883524
This module is to provide MP PPI services defined in PI 1.4.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17987 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17744.
AsciiStrCpyS (PerfData->Token, PERF_TOKEN_SIZE, Token);
The above using of AsciiStrCpyS will cause ASSERT if Token is longer than
PerfData->Token. Therefore, AsciiStrnCatS is used here to resolve the
issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17934 6f19259b-4bc3-4df7-8a09-765794883524
Add exception type decoder to print exception name string beside print
exception type value. The exception names are from IA32 SDM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17877 6f19259b-4bc3-4df7-8a09-765794883524
Should check NumberOfData value instead of treat its value as one BOOLEAN type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shuming Qiu <shuming.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17672 6f19259b-4bc3-4df7-8a09-765794883524
Get CPU BIST information from gEfiSecPlatformInformation2PpiGuid or
gEfiSecPlatformInformationPpiGuid Guided HOB and update the CPU healthy status
for CPU MP Service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17641 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17221 6f19259b-4bc3-4df7-8a09-765794883524
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17217 6f19259b-4bc3-4df7-8a09-765794883524
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17216 6f19259b-4bc3-4df7-8a09-765794883524
The DDK3790 tool chain fails when the PAUSE instruction is assembled:
error A2085: instruction or register not accepted in current CPU mode The solution is to use the .686 directive along with the .xmm directive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17134 6f19259b-4bc3-4df7-8a09-765794883524
For avoid the compiler optimizing the code, we let Parameter and Procedure in CpuData volatile.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17024 6f19259b-4bc3-4df7-8a09-765794883524
Add a new sleeping state for APs, when no procedure execution, put AP to sleep. when need to execute
procedure, only need to wake up this AP by sent SIPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17023 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
Make code consistence between ASM and S files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16530 6f19259b-4bc3-4df7-8a09-765794883524
when gBS->ExitBootServices() is called, the APs should avoid to access
the unsafed buff datas which were allocated by boot services.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16397 6f19259b-4bc3-4df7-8a09-765794883524
This sequence should happen:
* CpuMp.c: Allocate a stack for the APs
* ApStartup.c: Send Start IPI to wake APs in 16-bit real mode
* MpAsm.S: AP enters CpuDxe driver code without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16370 6f19259b-4bc3-4df7-8a09-765794883524
If timeout expires before AP returns from Procedure, the AP should
be terminated, we introduce ResetApStackLess() to send init IPI
to let AP exit Procedurce and re-available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16366 6f19259b-4bc3-4df7-8a09-765794883524
Due to the implementation of AcquireSpinLock() is not MP safe,
so we should use AcquireSpinLockOrFail directly instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16357 6f19259b-4bc3-4df7-8a09-765794883524
All APs use the same common stack to initialization. after
initialization, APs should switch to the stack of its own.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16351 6f19259b-4bc3-4df7-8a09-765794883524
introduce PCD value: PcdCpuMaxLogicalProcessorNumber and PcdCpuApStackSize,
used for initialize APs stacks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16350 6f19259b-4bc3-4df7-8a09-765794883524
This routine starts the APs and directs them to run the specified
code.
The specified code is entered without a stack being available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16349 6f19259b-4bc3-4df7-8a09-765794883524
We'll want to use the structures for AP startup.
Note: It seems previously we were not using '#pragma pack ()' in
CpuGdt.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16348 6f19259b-4bc3-4df7-8a09-765794883524
The AP startup code simply jumps into this code with the CpuDxe driver
without setting up a stack for the processor.
Therefore, this code must setup the stack before calling into C code.
This is the basic flow:
* AP enters CpuDxe driver code (AsmApEntryPoint) without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
- If ApEntryPointInC returns, the lock is freed, and another AP may
run
- The AP C code may call AsmApDoneWithCommonStack to indicate that
the AP is no longer using the stack, and another may therefore
proceed to use the stack and then call ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16347 6f19259b-4bc3-4df7-8a09-765794883524
This is the function the AP assembly code will expect to call after
getting a lock and setting up the stack.
Only one AP will enter this routine at a time.
If ApEntryPointInC exits, then the assembly code will loop around to
grab the lock, setup the stack, and call ApEntryPointInC again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16346 6f19259b-4bc3-4df7-8a09-765794883524
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16345 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16100 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16098 6f19259b-4bc3-4df7-8a09-765794883524
CpuExceptionHandlerLib has code that contains absolute relocations, not supported by
Xcode for X64, and it then copies this code to an alternate location in memory. It is
very hard to write IP relative self-modifiying code. I had to update AsmVectorNumFixup()
to also patch in the absolute addressess after the code was copied.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anderw Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16068 6f19259b-4bc3-4df7-8a09-765794883524
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16047 6f19259b-4bc3-4df7-8a09-765794883524
5. Add PACKAGE_UNI_FILE UNI file that contains the localized Abstract and Description of a package and localized strings associated with PCDs.
a. Addresses an information gap between DEC files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume PACKAGE_UNI_FILE and associated UNI file during UDP creation that performs the DEC -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce PACKAGE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> DEC conversion.
6. Add Package Extra UNI file that provides the localized Name of a package.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a package to specify extra files to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a package to go along with the localized Abstract and Description from the PACKAGE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15936 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15935 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15934 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15933 6f19259b-4bc3-4df7-8a09-765794883524
We strongly prefer that contribtions be offered using the same license
as the project/module. But, we should document other acceptable
licenses for contributions.
This will allow package owners to more easily know if they can accept
a contribution under a different source license.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Mark Doran <mark.doran@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
This implements the older VTF ResetVector code often used on EDK II
IA32 & X64 platforms.
This VTF requires build time fixups in order to find the SEC entry
point. The BaseTools GenFv tool has code that patches the jump target
of the reset vector code to match the entry point of the SEC image in
the PEI Firmware Volume.
v2:
* Rename from OldVtf to FixupVtf
* Use EDK II extension of .nasmb rather than .nasmbin
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15826 6f19259b-4bc3-4df7-8a09-765794883524
Previously, we would build the page tables in
Tools/FixupForRawSection.py.
In order to let NASM build VTF0 from source during the EDK II build
process, we need to move this into the VTF0 NASM code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15822 6f19259b-4bc3-4df7-8a09-765794883524
Using NASM we build VTF0 as part of the EDK II build process.
v2:
* Use EDK II extension of .nasmb rather than .nasmbin
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15821 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Yao, Jiewen
Laszlo Ersek
Michael Kinney
Jordan Justen
Hao Wu
Star Zeng
Qiu Shumin
Scott Duplichan
Chen Fan
Nikolai Saoukh
Anderw Fish
Gao, Liming