The original BdsDxe driver has "Enter Setup" status code
while current code not. This patch restores it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If 'ReadKeyStroke' function return EFI_NOT_READY then skip it.
If the return value is EFI_DEVICE_ERROR clean the currentString buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
EDKII build spec and DEC spec updated to support private package
definition.
If GUID, Protocol or PPI is listed in a DEC file, where the Private
modifier is used in the section tag ([Guids.common.Private] for example),
only modules within the package are permitted to use the GUID, Protocol
or PPI. If a module or library instance outside of the package attempts
to use the item, the build must fail with an appropriate error message.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This can accommodate 10 bridges (including root bridges, PCIe upstream and
downstream ports, etc -- see
<https://bugzilla.redhat.com/show_bug.cgi?id=1333238#c12> for more
details).
10 is not a whole lot, but closer to the architectural limit of 15 than
our current 4, so it can be considered a stop-gap solution until all
guests manage to migrate to virtio-1.0, and no longer need PCI IO BARs
behind PCIe downstream ports.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Make PcdPciIoBase and PcdPciIoSize dynamic PCDs, and set them in
MemMapInitialization(), where we produce our EFI_RESOURCE_IO descriptor
HOB. (The PCD is consumed by the core PciHostBridgeDxe driver, through our
PciHostBridgeLib instance.)
Take special care to keep the GCD IO space map unchanged on all platforms
OVMF runs on.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
In this patch, the AcpiTimerLib instances, ResetSystemLib, and PlatformPei
are modified together in order to keep VMs functional across a bisection:
they all must agree on the PMBA value used.
ResetSystemLib must not use dynamic PCDs. With SOURCE_DEBUG_ENABLE, it
gets linked into the debug agent, therefore the same restrictions apply to
it as to BaseRomAcpiTimerLib. Luckily, AcpiPmControl() is only used for
powering off the virtual machine, thus the extra cost of a PCI config
space read, compared to a PcdGet16(), should be negligible.
This is the patch that moves the PMBA to IO port 0x0600 on Q35 in
practice.
The ResetSystemLib change is easiest to verify with the "reset -s" command
in the UEFI shell (which goes through gRT->ResetSystem() and, in OVMF,
PcAtChipsetPkg/KbcResetDxe).
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
According to the ICH9 spec, PMBASE "provides 128 bytes of I/O space for
ACPI, GPIO, and TCO logic. This is placed on a 128-byte boundary".
On the Q35 machine type of QEMU, our current PMBASE setting of 0xB000 is
the only thing that prevents us from lowering the base of the PCI IO port
aperture from 0xC000. (The base must be aligned to 0x1000 due to PCI
bridge requirements.)
By moving our PMBASE to 0x0600 (moving the register block to
0x0600..0x067F inclusive), which is also what SeaBIOS uses on Q35, we will
be able to lower the PCI IO port aperture base to 0x6000 (the next IO port
under it being taken by the "vmport" device, at fixed 0x5658), while
steering clear of other QEMU devices.
On PIIX4, freeing up the 0x1000 IO ports at 0xB000 wouldn't help much,
because the 0xA000 block right below it is occupied by unmovable devices
(see <https://bugzilla.redhat.com/show_bug.cgi?id=1333238#c19> for
details).
Doing this for Q35 only has two more benefits:
- It won't interfere with Xen guests,
- The Q35 machine type with the smallest version number is "pc-q35-2.4",
which is guaranteed to have an ACPI generator. This matters because the
ACPI tables (FACP, DSDT) have to reflect the PM base address that we
program.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We already have the identical purpose (but different value) macro for
ICH9, namely ICH9_PMBASE_MASK in
"OvmfPkg/Include/IndustryStandard/Q35MchIch9.h".
Also, stop bit-negating signed integer constants.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
In the next patches, we'll differentiate the PMBA IO port address that we
program on PIIX4 vs. Q35.
Normally we'd just turn PcdAcpiPmBaseAddress into a dynamic PCD. However,
because we need this value in BaseRomAcpiTimerLib too (which cannot access
RAM and dynamic PCDs), it must remain a build time constant. We will
introduce its Q35 counterpart later.
As first step, replace the PCD with a new macro in "OvmfPlatforms.h";
Jordan prefers the latter to fixed PCDs in this instance.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We should store the right value to the PMBA (if the PMBA needs
initialization) before setting mAcpiTimerIoAddr from the PMBA.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: f122712b42
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
CorebootPayloadPkg has been changed to use generic SerialDxe driver
from MdeModulePkg. As part of the clean-up, the overridden SerialDxe
and PciSioSerialDxe drivers in CorebootModulePkg need to be removed.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
When copy new string content to BufferValue, need to clean the
BufferValue firstly, or the BufferValue may contain some
content that doesn't belong to the new string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When submit form fail, the progress point to the first fail part
in ConfigResp, so should free the ConfigResp after Progrss has
been processed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Static storage duration objects that are internal to a library instance
should:
- either have internal linkage (i.e., be declared STATIC),
- or, if they are referenced in multiple files of the library instance,
prefixed with a word that is specific to the library instance, and
minimizes namespace collisions.
In this case, the "gHiiDriverList" variable (with static storage duration
and external linkage) is defined in both BootMaintenanceManagerUiLib and
UiApp. When these are linked together, GCC catches the multiple external
definitions and aborts the build. (GCC notices this due to commit
214a3b79417f.) Fix the error by applying the first rule above.
Fixes: a85be3ae48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Use the MSR MSR_IA32_MISC_ENABLE definition defined in UefiCpuPkg/Include and
remove the local definition.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BTS used DS save area by IA32_DS_AREA MSR to get invoker IP instead of the
Last Branch Record Stack. So, removed the unnecessary BTS MSRs.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
SmmProfile feature depends on BTS feature to get the invoker IP (in SMM) from
last branch record. If this feature is not supported, SmmProfile cannot get the
invoker IP (in SMM). Per IA-32 Architectures Software Developer's Manual, BTS
feature is detected by IA32_MISC_ENABLE. If BIT11 of IA32_MISC_ENABLE is set,
BTS is not supported. But current implementation check BIT11 opposite. Also, BTS
feature does not depends on PEBS feature if supported or not.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Shifflett, Joseph <joseph.shifflett@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Code changes enables HttpDxe to handle PUT/POST operations.
EfiHttpRequest assumes "Request" and "HttpMsg->Headers" can
never be NULL. Also, HttpResponseWorker assumes HTTP Reponse
will contain headers. We could have response which could contain
only a string (HTTP 100 Continue) and no headers. Code changes
tries to do-away from these assumptions, which would enable
HttpDxe to support PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P nagaraj-p.hegde@hpe.com
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Enable AES cipher support for SmmCryptLib instance.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The bug is use FILE_GUID override to build the same module more than
once, GenFds report warning "xxx NOT found in DSC file; Is it really
a binary module?". The root cause is the module path with FILE_GUID
overridden has the file name FILE_GUIDmodule.inf, then
PlatformDataBase.Modules use FILE_GUIDmodule.inf as key which cause
__GetPlatformArchList__ return empty.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
in the generated Asbuilt inf would include the driver's complete
dependency expression, and it would be wrote as comment format. Original
bug is mix the depex expression with real comment in the depex section.
this patch is ignore the real comment, and list the depex expression.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patches rename CoreGetMemoryMapPropertiesTable to
CoreGetMemoryMapWithSeparatedImageSection.
The reason is that CoreGetMemoryMapPropertiesTable is called
by MemoryAttributesTable.c to get separated PE image section
information.
It is confusing to use *PropertiesTable, because it is NOT
related to PropertiesTable.c
We rename it to avoid confusing.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister) &
EnableMask) != EnableMask)) {
The bracket place is not right, I think it should be
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister)) &
EnableMask) != EnableMask)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: wang xiaofeng <winggundum82@163.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Use generic SerialDxe driver in MdeModulePkg instead of the one
in CorebootModulePkg. By doing this the reference for
PciSioSerialDxe driver will also be removed from DSC and FDF file.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Add the missing EFIAPI to fix the inconsistent routine declaration and
implementation of a protocol service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Fix variable set but not used errors detected by GCC 4.8.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Fix build errors detected with GCC 4.8.4: local variable set but not
used!
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add FSP2.0 support.
This series of patch is to support FSP2.0 specification at
https://firmware.intel.com/sites/default/files/FSP_EAS_v2.0_Draft%20External.pdf
Some major updates include:
1) One FSP binary is separated to multiple components:
FSP-T, FSP-M, FSP-S, and optional FSP-O.
Each component has its own configuration data region.
2) All FSP-APIs use same UPD format - FSP_UPD_HEADER.
3) Add EnumInitPhaseEndOfFirmware notifyphase.
4) FSP1.1/FSP1.0 compatibility is NOT maintained.
5) We also add rename Fsp* to FspWrapper* in IntelFsp2WrapperPkg,
to indicate that it is for FspWrapper only.
IntelFspPkg and IntelFspWrapperPkg will be deprecated.
The new Intel platform will follow FSP2.0 and use IntelFsp2Pkg
and IntelFsp2WrapperPkg.
The old platform can still use IntelFspPkg and IntelFspWrapperPkg
for compatibility consideration.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Ravi P Rangarajan <ravi.p.rangarajan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Ravi P Rangarajan <ravi.p.rangarajan@intel.com>
Change file arrangement to let user easy customize the front page UI.
After this change:
1. UiCustomizeFrontPage function in FrontPageCustomizedUi.c use to
let user customize front page menus. UiFrontPageCallbackHandler
function use to handle the callback for the added menus.
2. FrontPageCustomizedUiSupport.c file used to add support functions
used by FrontPageCustomizedUi.c file.
3. After this change, only above two files need to be updated if front page
menus needed to be changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Change file arrangement to let user easy customize the BMM UI.
After this change:
1. UiCustomizeBMMPage function in BootMaintenanceManagerCustomizedUi.c
use to let user customize BMM first page menus. UiBMMCallbackHandler
function use to handle the callback for the added menus.
2. BootMaintenanceManagerCustomizedUiSupport.c file used to add support
functions used by BootMaintenanceManagerCustomizedUi.c file.
3. After this change, only above two files need to be updated if BMM
first page menus needed to be changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add HII definitions from UEFI 2.6 for HII Image Variability and PNG
Blocks
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Per the description of HttpBootGetBootFile, the function should return
EFI_BUFFER_TOO_SMALL if the given buffer is smaller than the remote image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
HttpGenRequestMessage assumes that HTTP message would always
contain a request-line, headers and an optional message body.
However, subsequent to a HTTP PUT/POST request, HTTP requests
would contain just the message body. This patch supports
creation of such request messages with additional checks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Eric Dong
Zenith432
Pedroa Liu
Yonghong Zhu
Laszlo Ersek
Maurice Ma
Jiaxin Wu
Dandan Bi
Liming Gao
Jeff Fan
Samer El-Haj-Mahmoud
Nagaraj Hegde
Qin Long
Zhang, Chao B
Michael Zimmermann
Jiewen Yao
Star Zeng
wang xiaofeng
Lee Leahy
Jaben Carsey
Gary Lin