Fix build warnings for potentially uninitialized local variables
in the functions ShellMmLocateIoProtocol() and ShellCommandRunMm()
in the Shell implementation of the 'mm' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19233 6f19259b-4bc3-4df7-8a09-765794883524
This patch is used to fix ifconfig hang issue with incomplete
parameters. In addition, some error related output information
is added to increase the interactivity.
Cc: Leekha Shaveta <shaveta@freescale.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Tested-by: Leekha Shaveta <shaveta@freescale.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19212 6f19259b-4bc3-4df7-8a09-765794883524
In multiple root bridge platforms, different root bridges may
share the same segment but occupy different range of buses,
or may occupy different segments.
The fix is to find the correct root bridge IO instance by
comparing not only the segment but also the bus ranges.
It tries to access the MMIO and IO in the following order:
PciRootBridgeIo, CpuIo and direct IO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19181 6f19259b-4bc3-4df7-8a09-765794883524
When using 'dh' to dump all protocols installed on a handle, some of
them are shown as 'UnknownDevice'.
Device patch make 'dh' support all spec defined protocols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19177 6f19259b-4bc3-4df7-8a09-765794883524
In some platform 'map -r' may cost more than 1 min. This patch filter the target handles by
BlockIO and SimpleFileSystem protocol to reduce the time cost.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19149 6f19259b-4bc3-4df7-8a09-765794883524
When CustomCumulativeToken is not NULL, the CustomCumulativeData is expected non-NULL.
Add 'ASSERT' statement to ensure this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18956 6f19259b-4bc3-4df7-8a09-765794883524
CatSPrint allocates return buffer for the caller. The caller doesn't have to allocate one, and has to free the used buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18902 6f19259b-4bc3-4df7-8a09-765794883524
The value of PERF_CUM_DATA.Count and PERF_CUM_DATA.Duration field
keep cumulating on every execution of dp.
Initialize the CumData at dp's entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18727 6f19259b-4bc3-4df7-8a09-765794883524
Same as the beginning of function to use DP_GAUGE_STRING_LENGTH, but not
DXE_PERFORMANCE_STRING_LENGTH.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18725 6f19259b-4bc3-4df7-8a09-765794883524
Changing 'tftp' command's help output .uni file to match other EDK2 Shell commands as well as adjusting error messages text.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18659 6f19259b-4bc3-4df7-8a09-765794883524
In Shell spec 2.1 the return name of EFI_SHELL_PROTOCOL.GetCurDir() is defined as 'fs0:\current-dir' while in current implementation it's 'fs0:\current-dir\'.
To follow spec the patch removed the redundant '\' char.
Since it has been broken for a long time, some codes may depend on the broken behavior.
After this change 'EFI_SHELL_PROTOCOL.GetCurDir()' and 'UefiShellLib.ShellGetCurrentDir()'
will return a current directory string without tailing '\' (fs0:\current-dir), the value of Shell environment variable 'cwd' will become 'fs0:\current-dir' as well.
This patch has updated all the code in EDKII to make them depend on the new behavior.
Developers should check whether 'GetCurDir()' and 'ShellGetCurrentDir' are used in their source code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18653 6f19259b-4bc3-4df7-8a09-765794883524
If you try to 'set' a read only environment variable and it fails without printing any information.
This patch add error message printing when 'set' environment variable fails.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18598 6f19259b-4bc3-4df7-8a09-765794883524
Add the missing EFIAPI calling convention to the CheckPacket() function.
Without it, the gcc build breaks due to the incompatible pointer
assignment in "Mtftp4Token.CheckPacket = CheckPacket".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18553 6f19259b-4bc3-4df7-8a09-765794883524
Added SMBIOS 3.0 support in dmdem Shell command since SMBIOS 3.0 uses a different GUID in the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18506 6f19259b-4bc3-4df7-8a09-765794883524
There are other libraries with similarly named functions that could be linked with the Shell
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18456 6f19259b-4bc3-4df7-8a09-765794883524
Since Shell will remove the quotes in parameters, setvar cannot receive the quotes from ="ascii" or =L"unicode". User should add ^ to escape quotes in setvar data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18454 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update to use NetLibDetectMedia() directly.
This patch is used to get media status in ifconfig command.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18363 6f19259b-4bc3-4df7-8a09-765794883524
Some of the libraries under ShellPkg/Library/ are only intended to be
loaded into the Shell by means of a NULL LibraryClass resolution, and
serve no other purpose. Since the Shell itself is a UEFI_APPLICATION, it
makes sense to set the module type of those libraries to UEFI_APPLICATION
as well.
This allows us to use different compiler flags for the Shell application
itself but also for the majority of its constituent parts that are built
separately via these libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18310 6f19259b-4bc3-4df7-8a09-765794883524
R18201 fix caused ifconfig in shell failed to get the address from dhcp with the
command "ifconfig -s eth0 dhcp" since the default policy is dhcp already.
We can fix it by following the rule to starting the Ip4 auto configuration.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18244 6f19259b-4bc3-4df7-8a09-765794883524
1. Refine parameter name to consistent with function headers.
2. To avoid potential bug BOOLEAN values should not use explicit comparisons to TRUE or FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18222 6f19259b-4bc3-4df7-8a09-765794883524
EDK II C coding style requires use of 'm' or 'g' for module globals.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18184 6f19259b-4bc3-4df7-8a09-765794883524
Initialize local variable before it is passed into a function by reference.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18183 6f19259b-4bc3-4df7-8a09-765794883524
Fix issue about ping fail with IPv4, which is caused by the incorrect
checksum in request message.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18167 6f19259b-4bc3-4df7-8a09-765794883524
EFI_UNSPECIFIED_TIMEZONE means display local time. TZ of 0 is UTC.
Thus EFI_UNSPECIFIED_TIMEZONE means ignore TZ, 0 means UTC. When this code is
fixed to adust file TZ to local TZ you need to preserve
EFI_UNSPECIFIED_TIMEZONE.
FAT always return EFI_UNSPECIFIED_TIMEZONE.
Modern filesystems, HFS+, NTFS, ext3, etc store time in UTC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18051 6f19259b-4bc3-4df7-8a09-765794883524
This 'tftp' command allows to download a file from a TFTP server.
A specific network interface can be chosen in case there are multiple
interfaces.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18015 6f19259b-4bc3-4df7-8a09-765794883524
Serial console driver may not support all databits / stopbits attribute values.
But ‘sermode’ command only displays a general error indicating operation failure.
Instead it should decode error status and report more accurate error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17978 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Tapan Shah <<tapandshah@hp.com>>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17894 6f19259b-4bc3-4df7-8a09-765794883524
that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17888 6f19259b-4bc3-4df7-8a09-765794883524
also fixes a few out of date comments.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17816 6f19259b-4bc3-4df7-8a09-765794883524
In order to indicate the catena length use StrnCatS instead of StrCatS to generate Destination string, and update the DestMax of Destination string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17795 6f19259b-4bc3-4df7-8a09-765794883524
When doing the mv we should check whether source is 'above' dest on file path tree. This patch make the check logic more precise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17750 6f19259b-4bc3-4df7-8a09-765794883524
parse command does not remove escape character ^ if used to pass special characters like ^ , “ in a quoted -sfo output string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17556 6f19259b-4bc3-4df7-8a09-765794883524
parse reads data from StdIn when pipe is used and does not require –sfo output stored in a file. (e.g.: fs0:\> ls *.nsh –sfo | parse FileInfo 2)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17555 6f19259b-4bc3-4df7-8a09-765794883524
This updates help output to put dynamic commands in correct alphabetical location mixed into the other commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17534 6f19259b-4bc3-4df7-8a09-765794883524
The list of handles needs to be freed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17199 6f19259b-4bc3-4df7-8a09-765794883524
Some protocols still had this at the end of protocol name. remove to standardize.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17194 6f19259b-4bc3-4df7-8a09-765794883524
If this function fails in release build then the error was
not handled and SourceHandle was not valid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17184 6f19259b-4bc3-4df7-8a09-765794883524
1.mv deletes file/directory when trying to move it to non-existing file system.
2.mv causes RSOD in system when trying to move same file at the same location.
3.Refactor mv and cp command with command name passed-in.
remove redundant move status error message when file failed to move across file system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17129 6f19259b-4bc3-4df7-8a09-765794883524
The ShellCommandRunSetVar() function calls the ShellIsHexOrDecimalNumber()
UefiShellLib function to determine if the data string in the SETVAR
command is a string of hexadecimal bytes.
However, ShellIsHexOrDecimalNumber() calls ShellConvertStringToUint64()
for validation. Therefore SETVAR rejects hex strings that cannot be
interpreted as UINT64 values due to range errors, despite the fact that
the hexadecimal data string of the SETVAR command is supposed to describe
an arbitrary array of bytes, rather than UINT64 values.
The internal library function InternalShellIsHexOrDecimalNumber() comes
close, as the first idea for the fix, however it is not quite right
either; it removes a leading minus sign, plus it allows 0x / 0X prefixes.
This would not be correct for the SETVAR command.
Instead, add a trivial utility function that is specific to the SETVAR
implementation. IsStringOfHexNibbles() accepts empty strings for
simplicity, but where we call it we have already ensured that the data
string is not empty (because that is handled earlier by the "delete
variable" branch of SETVAR). An even number of nibbles is also enforced
near the call site.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17128 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers (such as ARM toolchain) complain if there is
no new line at the end of a source file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17105 6f19259b-4bc3-4df7-8a09-765794883524
smbiosview can dump 64-bit entry point and table
as long as SMBIOS 3.0 table exists in system configuration table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17060 6f19259b-4bc3-4df7-8a09-765794883524
Updates to various profile commands help and error message output with better wordings.
Fix few inconsistency issues found in error messages across various profile commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17032 6f19259b-4bc3-4df7-8a09-765794883524
Fixed smbiosview to use correct value to parse Type 27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17007 6f19259b-4bc3-4df7-8a09-765794883524
ARM Compiler version 5 raises the warning/error (warning treated as error):
#191-D: type qualifier is meaningless on cast type
The compiler team said the warning is valid because from the C90 standard,
section 6.5.3 it is specified that "The properties associated with
qualified types are meaningful only for expressions that are lvalues."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16888 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Level3 profile commands response output.
Updating Level3 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16732 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Network1 profile commands response output.
Updating Network1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16731 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Level2 profile commands response output.
Updating Level2 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16730 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Debug1 profile commands response output.
Updating Debug1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16729 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Level1 profile commands response output.
Updating Level1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16728 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Driver1 profile commands response output.
Updating Driver1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16727 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16601 ("MdeModulePkg, MdePkg, NetworkPkg, OvmfPkg, PerformancePkg,
ShellPkg: Library Migration.") incorporated ShellPkg/Library/BasePathLib
into MdePkg/Library/BaseLib. BasePathLib had been the only instance of
library class PathLib.
Even so, SVN r16606 ("ShellPkg: allow creating of files to create required
directory path") added a PathLib dependency to
"ShellPkg/Library/UefiShellLib/UefiShellLib.inf".
This breaks edk2 platforms that build the "new" UEFI shell from source.
Undo the wrong dependency.
Similarly, update the <Library/PathLib.h> #include directive to
<Library/BaseLib.h> (example function prototype: PathRemoveLastItem()).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16609 6f19259b-4bc3-4df7-8a09-765794883524
Move libraries from ShellPkg into MdeModulePkg and MdePkg.
The following libraries are being migrated out of ShellPkg in order to make
their functionality more widely available.
• PathLib: Incorporate into MdePkg/Library/BaseLib
• FileHandleLib: MdePkg/Library/UefiFileHandleLib
• BaseSortLib: MdeModulePkg/Library/BaseSortLib
• UefiSortLib: MdeModulePkg/Library/UefiSortLib
Diffs showing file changes are in the attached file, LibMigration.patch.
A description of the changes follows:
• Move ShellPkg/Include/Library/FileHandleLib.h to MdePkg/Include/Library/FileHandleLib.h
• Move ShellPkg/Include/Library/SortLib.h to MdeModulePkg/Include/Library/SortLib.h
• Move ShellPkg/Library/BaseSortLib to MdeModulePkg/Library/BaseSortLib
• Move ShellPkg/Library/UefiSortLib to MdeModulePkg/Library/UefiSortLib
• Move ShellPkg/Library/BasePathLib/BasePathLib.c to MdePkg/Library/BaseLib/FilePaths.c
• Merge ShellPkg/Include/Library/PathLib.h into MdePkg/Include/Library/BaseLib.h
• Delete ShellPkg/Library/BasePathLib; Includes BasePathLib.c and BasePathLib.inf
• NetworkPkg/NetworkPkg.dsc
• PerformancePkg.dsc
• OvmfPkg/OvmfPkgX64.dsc
• OvmfPkg/OvmfPkgIa32X64.dsc
• OvmfPkg/OvmfPkgIa32.dsc
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
• MdeModulePkg/MdeModulePkg.dec
o Add SortLib library class
• MdePkg/MdePkg.dec
o Add FileHandleLib library class
o Add PcdUefiFileHandleLibPrintBufferSize PCD
• MdePkg/Library/BaseLib/BaseLib.inf
o Add FilePaths.c to [Sources]
• MdePkg/Include/Library/BaseLib.h
o Update file description to include "file path functions"
• ShellPkg/ShellPkg.dsc
o Change PACKAGE_GUID to { C1014BB7-4092-43D4-984F-0738EB424DBF }
o Update PACKAGE_VERSION to 1.0
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
o Remove ShellPkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf from [Components]
• ShellPkg/ShellPkg.dec
o Update PLATFORM_VERSION to 1.0
o Remove declarations of the FileHandleLib, SortLib, and PathLib Library Classes
o Update comment for the PcdShellPrintBufferSize PCD.
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
• ShellPkg/Application/Shell/Shell.inf
o Remove PathLib from [LibraryClasses]
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.h
• ShellPkg/Application/Shell/Shell.h
o Remove #include <Library/PathLib.h>
• ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
o Add PathLib to [LibraryClasses]
• ShellPkg/Library/UefiShellLevel1CommandsLib/If.c
o Remove #include <Library/PathLib.h>
• ShellPkg/Application/ShellSortTestApp/ShellSortTestApp.inf
o Add MdeModulePkg/MdeModulePkg.dec to [Packages]
• MdeModulePkg/Library/BaseSortLib/BaseSortLib.inf
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
o Replace ShellPkg.dec with MdeModulePkg.dec in [Packages]
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.c
o Remove #include <ShellBase.h>
o Define USL_FREE_NON_NULL() to replace SHELL_FREE_NON_NULL()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16601 6f19259b-4bc3-4df7-8a09-765794883524
This warning/error raised by ARM toolchain prevents to build
the EFI Shell for ARM 32-bit with this toolchain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16323 6f19259b-4bc3-4df7-8a09-765794883524
Following commit 7fe3fbad05, building
OvmfPkg on Linux breaks with an "incompatible pointer type" error.
This patch adds a cast to supress the warning and allow the build
to complete
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16198 6f19259b-4bc3-4df7-8a09-765794883524
- Use Shell Help print function that understands Shell Man Page format.
- Move Dynamic help print above the catchall case otherwise the help is
printed multiple times in case of man page format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16053 6f19259b-4bc3-4df7-8a09-765794883524
Shell Libraries can now be used from Platform Drivers with the
introduction of the Shell Dynamic Command Protocol.
Adding DXE_DRIVER class allows to use these libraries with this
class of driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16052 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16005 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16004 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16003 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16002 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16001 6f19259b-4bc3-4df7-8a09-765794883524
* Follow a consistent style
* Add consistent sections: NOTES, EXAMPLES, RETURN VALUES, etc.
* Wrap the text to fit in 80x25 formatted console output
* Remove excessive and very verbose examples output
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15994 6f19259b-4bc3-4df7-8a09-765794883524
* Follow a consistent style
* Add consistent sections: NOTES, EXAMPLES, RETURN VALUES, etc.
* Wrap the text to fit in 80x25 formatted console output
* Remove excessive and very verbose examples output
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15986 6f19259b-4bc3-4df7-8a09-765794883524
For Invalid character ‘-’ in Pci.c line 806 and line 811, using ASCII
encoding byte 0x2d to replace.
Example error from GCC 4.9:
ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c:806:5: error: converting to execution character set: Invalid or incomplete multibyte or wide character
L"Ethernet (802.11a � 5 GHz)",
^
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15889 6f19259b-4bc3-4df7-8a09-765794883524
This updated the strings to be compliant with PCI CODE AND ID ASSIGNMENT SPECIFICATION 1.5.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15885 6f19259b-4bc3-4df7-8a09-765794883524
- Update 'devices -sfo' format to match UEFI Shell 2.1 spec
- Update help output for easier viewing
- Update 'devices' output format for better alignment when there are many device handles:
T D
Y C I
P F A
CTRL E G G #P #D #C Device Name
==== = = = == == === =========================================================
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15884 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCpy with StrnCpy or refactors out the usage of StrCpy through some other means.
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15882 6f19259b-4bc3-4df7-8a09-765794883524
- Update 'drivers -sfo' format to match UEFI Shell 2.1 spec
- Update help output for easier viewing
- Update 'drivers' output format for better alignment
T D
Y C I
P F A
DRV VERSION E G G #D #C DRIVER NAME IMAGE PATH
=== ======== = = = === === =================================== ==========
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15870 6f19259b-4bc3-4df7-8a09-765794883524
- Update 'date -sfo' format to match UEFI Shell 2.1 spec
- Fixes to correctly initialize Second
- Set correct sign when setting timezone with the 'time -tz' command. Now matches UEFI spec calculation of "Localtime = UTC - TimeZone"
- Display "LOCAL" when TimeZone == EFI_UNSPECIFIED_TIMEZONE
- Allow a timezone of '_local' to be provided by user
- Better invalid command line checking
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15840 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCpy with StrnCpy or refactors out the usage of StrCpy through some other means.
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15839 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCpy with StrnCpy or refactors out the usage of StrCpy through some other means.
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15771 6f19259b-4bc3-4df7-8a09-765794883524
As the shell inverts foreground and background it needs to be sure that it properly masks off the reserved bits and this is important since the foreground and background are not the same numbers of bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15681 6f19259b-4bc3-4df7-8a09-765794883524
The comp command was potentially displaying the incorrect offset into the file due to comparing 3 extra bytes for difference groups.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15558 6f19259b-4bc3-4df7-8a09-765794883524
This patch correctly displays map information when a filter was applied such as “map fs*” or “map f*”, including the use of “-c” to display the consist names first in this situation.
It also moves a statement from both clauses of an “if/else” to above the “if” statement for efficiency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15548 6f19259b-4bc3-4df7-8a09-765794883524
This patch adds support to display driver handles which has AdapterInfo protocol installed using ‘dh’ command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15499 6f19259b-4bc3-4df7-8a09-765794883524
This patch adds detailed information from the GOP protocol for commands (i.e. DH), that display details about the protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15493 6f19259b-4bc3-4df7-8a09-765794883524
This allows near complete use of drive roots “fs0:” and “fs0:\” as directories and arguments to commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15463 6f19259b-4bc3-4df7-8a09-765794883524
This function was not exposed outside the library and is not used internally.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15353 6f19259b-4bc3-4df7-8a09-765794883524
It's invalid to set a variable that's available from runtime services but not
from boot services.
Currently if you pass '-rt' without '-bs' you get a generic
'Invalid Parameter' message. We should either print a more useful message in
this case, or make '-rt' imply '-bs' (as this patch does). The Shell Spec is
ambiguous on the matter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <Brendan.Jackman@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15323 6f19259b-4bc3-4df7-8a09-765794883524
This makes sure that recursion into sub directories looks through all subdirectories, not just those that match the initial search pass. Also only prints out any information for directories in which at least one matching file is found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.Carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15250 6f19259b-4bc3-4df7-8a09-765794883524
This means we can use ShellExecute without thinking which shell
environment is in use. However it still isn't ideal: if
mEfiShellEnvironment2->Execute returns EFI_INVALID_PARAMETER, we can't tell
whether Execute() received an invalid parameter (e.g. ParentImageHandle was
NULL), or whether we tried to execute a command with an invalid parameter
(for example CommandLine "ls -hurdygurdy").
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <Brendan.Jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15183 6f19259b-4bc3-4df7-8a09-765794883524
This has no change in the behavior of the LS command, but it removes the printing logic from the main recursive function. This is the first step toward changing the code flow without affecting the look and feel.
The long term goal is correcting the recursion to be more clean and useful to users.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15179 6f19259b-4bc3-4df7-8a09-765794883524
This change removes ASSERT statements and replaces them with logic to break out of the loop. This both prevents spinning forever and prevents processing the returned data from the function that failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15133 6f19259b-4bc3-4df7-8a09-765794883524
This pointer never gets free when running new apps on the old shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15095 6f19259b-4bc3-4df7-8a09-765794883524
This pointer gets free twice and this does not work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15094 6f19259b-4bc3-4df7-8a09-765794883524
The file format is as below:
<File> := <Variable>+
<Variable> := <Name-Size> <Data-Size> <Name> <GUID> <Attributes> <Data> <Crc32>
Each variable representation in the file has a CRC32 value which can provide a mechanism to detect the file modification.
When any CRC32 is incorrect, dmpstore rejects to load the variables from the file.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15083 6f19259b-4bc3-4df7-8a09-765794883524
The shell was not freeing sufficient memory when freeing a list of files. The structure contained a pointer which was being left behind. I made a new function to replace the shared freeing function which frees the “Path” member of the SHELL_COMMAND_FILE_HANDLE structure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15073 6f19259b-4bc3-4df7-8a09-765794883524
there is a new non-spec parameter "-_e" which allows additional information output to be controlled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15070 6f19259b-4bc3-4df7-8a09-765794883524
This change allows DmpStore command to delete all variables whereas before it would stop after a single deletion due to looping errors. It uses a recursive function and deletes the last item returned from GetNextVariableName() first and then goes "backwards" to the first items.
This can't delete authenticated variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15014 6f19259b-4bc3-4df7-8a09-765794883524
The shell was failing to correctly parse up to the space only for “run (1 3)” and also losing the space for “in ” a b” c” for loop initialization. This fixes for initialization to be correct.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14997 6f19259b-4bc3-4df7-8a09-765794883524
There was an assumption that this API would never fail. That is not true and the return value is checked just a few lines later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14951 6f19259b-4bc3-4df7-8a09-765794883524
This allows for the user to get out of answering a question with CTRL-C
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14950 6f19259b-4bc3-4df7-8a09-765794883524
When “map –c” is run, the mapped items should be displayed with the consistent name as the one listed to the left and all other names listed as “alias(s)”
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Chris Phillips <chrisp@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14881 6f19259b-4bc3-4df7-8a09-765794883524
- Automatically use non-interactive mode during script execution.
- Automatically use non-interactive mode when a specific value is read (omitting this behavior was a violation of the UEFI Shell Spec)
- Only output the value read in when reading a value in a script; this allows automated use of the MM command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Chris Phillips <chrisp@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14874 6f19259b-4bc3-4df7-8a09-765794883524
Since this is expected to use a string with spaces between some of the numbers, the function must halt on spaces and not skip them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14854 6f19259b-4bc3-4df7-8a09-765794883524
There were 2 "STR_UCS2" strings. This renames one of them so they are unique.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14852 6f19259b-4bc3-4df7-8a09-765794883524
- Add DiskIO2 to list of known protocols
- Fix string check to be case insensitive for commands like ‘dh –p protocolname’
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14851 6f19259b-4bc3-4df7-8a09-765794883524
- Better handling to skip byte order mark in Unicode files.
- Only display valid ASCII characters.
- Change to use ShellPrintEx() instead of Print().
- Print each character instead of %s to avoid possible overrun when not NULL terminated.
- Check for ExecutionBreak.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14788 6f19259b-4bc3-4df7-8a09-765794883524
- Better output to print header and file not found text
- Fix file attribute argument handling
- Fix so path ending with ‘\’ or ‘*’ is handled correctly
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14786 6f19259b-4bc3-4df7-8a09-765794883524
- Fixes shell application launch version output to match ‘ver’ command, as specified by the UEFI Shell spec.
- Adds PcdShellSupplier for <shell-supplier-specific-data> line of version output. Defaulted to “EDK II”.
- Display only 1 startup.nsh countdown line per second instead of 10 per second.
- Fix issue where command line is just 1 or more “ “ characters and displayed garbage.
- Fix for @echo –off and @echo –on to not restore echo state
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14784 6f19259b-4bc3-4df7-8a09-765794883524
FreePool() will receive NULL if AllocateZeroPool() fails.
So a check for NULL is needed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sergei Antonov <saproj@gmail.com>
reviewed-by: jaben carsey <jaben.carsey@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14689 6f19259b-4bc3-4df7-8a09-765794883524
If AllocateZeroPool() returns NULL,
GetVariable() will return EFI_BUFFER_TOO_SMALL,
FreePool() will receive NULL.
So check for NULL before FreePool().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14688 6f19259b-4bc3-4df7-8a09-765794883524
- variable "TempLocation" was set but never used
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14605 6f19259b-4bc3-4df7-8a09-765794883524
There was a case where an copy operation of a small file overwriting a larger file would not correctly remove the extra space in the old file. The resultant file would have the entire source file and then what remained of the original file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
reviewed-by: El-Haj-Mahmoud, Samer <samer.el-haj-mahmoud@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14584 6f19259b-4bc3-4df7-8a09-765794883524
Some storage subsystems benefit by having shell file operation sizes (affecting copy and type commands right now) larger than 2^16. This patch changes the PcdShellFileOperationSize type to 32-bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14534 6f19259b-4bc3-4df7-8a09-765794883524
This is required when recursively removing directories with files on file systems other than the current one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Eugene Cohen <eugene@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14441 6f19259b-4bc3-4df7-8a09-765794883524
Please find the attached patch that fixes the ShellPkg when gRT->GetTime() returns an error (eg: early UEFI platform bringup with a RTC controller that is not supported).
On some platforms, gRT->GetTime() might not return EFI_SUCCESS. The Shell must check the return status before to assume the returned time is valid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14337 6f19259b-4bc3-4df7-8a09-765794883524
also, adds a footer to the bottom of the “help” command to explain help switches.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Matt Stanbro <Matthew.A.Stanbro@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14202 6f19259b-4bc3-4df7-8a09-765794883524
This command is only included in the build with command line option "-D INCLUDE_DP". The user must also update the DSC with appropriate library instances that match the platform for the build to succeed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14160 6f19259b-4bc3-4df7-8a09-765794883524
This function allows for easier access to printing standard command help.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Matt Stanbro <Matthew.A.Stanbro@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14159 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
1) ShellPkg/Library/UefiHandleParsingLib
a. UefiHandleParsingLib.c – ConvertHandleToHandleIndex() and ConvertHandleIndexToHandle()
i. Update to work correctly when handles are destroyed due to driver disconnect operations. Same handle index is never reused.
b. UefiHandleParsingLib.c – ParseHandleDatabaseByRelationshipWithType() and ParseHandleDatabaseForChildControllers()
i. Expand to handle Service Binding Protocol usage such as Network stack.
2) ShellPkg/Library/UefiShellDriver1CommandsLib
a. DevTree.c – Fix bug where the same handle is shown more than once.
b. Dh.c – Fix use of GetDriverName() and GetDriverImageName(). The status returned must always be evaluated.
c. Disconnect.c – Remove requirement that a handle being disconnected must support Device Path Protocol. This prevents driver model handles without device paths from being disconnected (i.e. Network Stack)
d. OpenInfo.c – Fix bug when showing open info about a ControllerHandle that has been destroyed due to a disconnect or an unload operation.
e. UefiShellDriver1CommandsLib.uni – Fix “drivers” command formatting when handle indexes have more than 2 characters.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13786 6f19259b-4bc3-4df7-8a09-765794883524
1.Refine the logic about show different attribute.
2.Refine the logic about allocate memory for variable name and data.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13558 6f19259b-4bc3-4df7-8a09-765794883524
Note: Some one should port smbiosview to use the edk2 MdePkg/Include/IndustryStandard/SmBios.h and not carry it's own definitions, that are now out of date.
signed-off-by:andrewfish
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12971 6f19259b-4bc3-4df7-8a09-765794883524
This indirectly updates the DH command since it will automatically call the new function.
signed-off-by: jcarsey
reviewed-by: leegrosenbaum
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12922 6f19259b-4bc3-4df7-8a09-765794883524
Currently hexedit thinks all files that are non-existent (i.e. new) or empty must be a memory error since the pointer is checked, but the file size is not referenced.
Signed-off-by: jcarsey
Reviewed-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12797 6f19259b-4bc3-4df7-8a09-765794883524
This fix corrects the logic that checks number length such that is functions correctly without a trailing space.
Signed-off-by: jcarsey
Reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12736 6f19259b-4bc3-4df7-8a09-765794883524
This patch changes the file redirection support to allow for quote delimited filenames that contain spaces and updates the edit command to allow spaces in the filename. This also properly fails for attempts to redirect to "" (empty quotes).
signed-off-by: jcarsey
reviewed-by: jliu66
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12685 6f19259b-4bc3-4df7-8a09-765794883524
This adds lots of pointer verification with ASSERTs only used when the condition should be impossible and never for memory allocation.
signed-off-by: jcarsey
reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12524 6f19259b-4bc3-4df7-8a09-765794883524
This adds lots of pointer verification with ASSERTs only used when the condition should be impossible and never for memory allocation.
signed-off-by: jcarsey
reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12523 6f19259b-4bc3-4df7-8a09-765794883524
Cp command fixed to allow for copying single or multiple files to the root of the drive with destination directory \.
Cd command fixed to allow for changing CWD to the root of the drive with destination directory \.
signed-off-by: jcarsey
reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12392 6f19259b-4bc3-4df7-8a09-765794883524
* Fix the search bug: if word to be searched at the beginning of the line, it can not be found out.
Signed-off-by: kidzyoung
reviewed-by: jcarsey
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12116 6f19259b-4bc3-4df7-8a09-765794883524
* Add Ctrl based hotkey alternatives to function hotkeys.
* Update help menu for hexedit.
Signed-off-by: kidzyoung
Reviewed-by: jljusten
Reviewed-by: jcarsey
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12082 6f19259b-4bc3-4df7-8a09-765794883524
* Add Ctrl-E hotkey for help
* Add Ctrl based hotkey alternatives to function hotkeys
* Don't show hotkey help on the main screen
* Change the file buffer's row count for display to adjust the new screen format
* Change the edit status bar location, the new edit status bar is in the last line
* Change the location of the edit bar, the new edit input bar is in the last line
Signed-off-by: kidzyoung
reviewed-by: jcarsey
reviewed-by: jljusten
reviewed-by: jiang
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12036 6f19259b-4bc3-4df7-8a09-765794883524
1) Remove the 3 functions out of the shell's internal library (ShellCommandLib)
2) Add a new library class (PathLib)
3) Add an instance of this class (BasePathLib)
4) Change all internal shell callers to use this new library class.
signed-off-by: jcarsey
reviewed-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11936 6f19259b-4bc3-4df7-8a09-765794883524
This removes the non-shared gEfiShellProtocol and gEfiShellParametersProtocol and renames the shared version to those names.
This removes the m-versions of those protocol pointers.
signed-off-by: jcarsey
reviewed-by: darylm503
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11900 6f19259b-4bc3-4df7-8a09-765794883524
TimeDate.c: replace magic number with constant.
Ls.c: use new warning printout string and remove an ASSERT. also replace magic number with constant.
The UNI file: add new warning printout string.
Signed-off-by: jcarsey
Reviewed-by: geekboy15a
Reviewed-by: lgrosenb
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11703 6f19259b-4bc3-4df7-8a09-765794883524
update connect and reconnect to account for ignoring the child handle in the connect operation.
update disconnect to output correctly.
hexedit corrected to properly display status bar and title bar and refresh when required.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11525 6f19259b-4bc3-4df7-8a09-765794883524
echo - add input verificaiton.
help - prints out commands in sorted order.
touch - add comments.
type - add error when file not found. add comments.
main lib files:
add comments, clarify error messages.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11427 6f19259b-4bc3-4df7-8a09-765794883524
Cp - support "\" as root of drive indicator.
Load - invert "-nc" to not connect.
Ls - ignore archive file attribute.
Map - add more input verification. fix add by handle.
Mv - support overwrite question. support "\" as root of drive indicator.
Parse - add comments.
Rm - add comments.
TimeDate - add more input verification. add comments.
Vol - add new command.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11426 6f19259b-4bc3-4df7-8a09-765794883524
Samer El-Haj-Mahmoud
Michael Kinney
Qiu Shumin
Jiaxin Wu
Ruiyu Ni
Jaben Carsey
Jordan Justen
Cecil Sheng
Cinnamon Shia
Star Zeng
Tapan Shah
Laszlo Ersek
Samer El-Haj-Mahmoud
Eric Dong
Ard Biesheuvel
Tapan Shah
Andrew Fish
Ronald Cron
Bruce Cran
Samer El-Haj-Mahmoud
Liming Gao
Olivier Martin
Elvin Li
Daryl McDaniel
Chris Phillips
jcarsey
Gabriel Somlo
jcarsey
Harry Liebel
Samer El-Haj-Mahmoud elhaj
Scott Duplichan
Jeff Bobzin (jeff.bobzin
Brendan Jackman
Leandro G. Biss Becker
Tian, Hot
Sergei Antonov
Eugene Cohen
Gary Ching-Pang Lin
jcarsey
lgao4
darylm503
ydong10
niruiyu
sfu5
lzeng14
mdkinney
rsun3
andrewfish
hhtian
jljusten