Create a helper function to query whether ID_AA64MFR1_EL1 indicates
presence of the Virtualization Host Extensions. This feature is only
visible in AARCH64 state.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Jake reports that the IS_ARM_MEMORY_REGION_ATTRIBUTES_SECURE() macro is
no longer accurate since commit 852227a9d5 ("ArmPkg/Mmu: Remove
handling of NONSECURE memory regions").
Fortunately, it only affects the NS bit in level 1 short descriptors,
which is ignored when executing in non-secure mode. And given that
running UEFI in the secure world is not a use case we aim to support,
let's just drop this logic altogether.
Reported-by: Jake Garver <jake@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
If gST->ConOut is available when Arm's DefaultExceptionHandler is
running, AsciiPrint will get called to attempt to print to ConOut, in
addition to the serial output.
AsciiPrint calls AsciiInternalPrint in UefiLibPrint.c which in turn
calls AllocatePool to allocate a buffer to convert the Ascii input
string to a Unicode string to pass to ConOut->OutputString.
Per the comment on DefaultExceptionHandler, we should not be allocating
memory in the exception handler, as this can cause the exception handler
to fail if we had a memory exception or the system state is such that we
cannot allocate memory.
It has been observed on ArmVirtQemu that exceptions generated in the
memory handling code will fail to output the stack dump and CPU state
that is critical to debugging because the AllocatePool will fail.
This patch fixes the Arm and AARCH64 DefaultExceptionHandlers to not
allocate memory when ConOut is available and instead use stack memory to
convert the Ascii string needed for SerialPortWrite to the Unicode
string needed for ConOut->OutputString. Correspondingly, ArmVirtQemu can
now output the stack dump and CPU state when hitting an exception in
memory code.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
The OP-TEE secure OS exposes a non-secure memory region for
communication between the secure OS itself and any clients in the
non-secure firmware. This memory is writable by non-secure and is not
used for code only data, and so it should be mapped non-executable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Now that we have a sane API to set and clear memory permissions that
works the same on ARM and AArch64, we no longer have a need for the
individual set/clear no-access/read-only/no-exec helpers so let's drop
them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Currently, ArmSetMemoryAttributes () takes a combination of
EFI_MEMORY_xx constants describing the memory type and permission
attributes that should be set on a region of memory. In cases where the
memory type is omitted, we assume that the memory permissions being set
are final, and that existing memory permissions can be discarded.
This is problematic, because we aim to map memory non-executable
(EFI_MEMORY_XP) by default, and only relax this requirement for code
regions that are mapped read-only (EFI_MEMORY_RO). Currently, setting
one permission clears the other, and so code managing these permissions
has to be aware of the existing permissions in order to be able to
preserve them, and this is not always tractable (e.g., the UEFI memory
attribute protocol implements an abstraction that promises to preserve
memory permissions that it is not operating on explicitly).
So let's add an AttributeMask parameter to ArmSetMemoryAttributes(),
which is permitted to be non-zero if no memory type is being provided,
in which case only memory permission attributes covered in the mask will
be affected by the update.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
The PCD gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable
indicates if a variable driver will emulate the variable NV mode.
This PCD is defined as [PcdsFixedAtBuild, PcdsPatchableInModule,
PcdsDynamic, PcdsDynamicEx].
Some firmware builds may define this PCD as a dynamic PCD and
initialise the value at runtime. Therefore, move the PCD declaration
from the [FixedPcd] section to the [Pcd] section in the platform
boot manager library file PlatformBootManagerLib.inf. Without this
change the build would not succeed.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The helper that updates live page table entries writes a zero entry,
invalidates the covered address range from the TLBs, and finally writes
the actual entry. This ensures that no TLB conflicts can occur.
Writing the final entry needs to complete before any translations can be
performed, as otherwise, the zero entry, which describes an invalid
translation, may be observed by the page table walker, resulting in a
translation fault. For this reason, the final write is followed by a DSB
barrier instruction.
However, this barrier will not stall the pipeline, and instruction
fetches may still hit this invalid translation, as has been observed and
reported by Oliver. To ensure that the new translation is fully active
before returning from this helper, we have to insert an ISB barrier as
well.
Reported-by: Oliver Steffen <osteffen@redhat.com>
Tested-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The UEFI Shell is a non-active boot option, at the opposite of UiApp.
If no valid boot option is found, UiApp is selected. UiApp requires a
human interaction. When installing a new EDKII image in CIs or when
scripting is required, this is problematic.
If no valid boot option is discovered, add a path to directly go to
the UEFI Shell where the startup.nsh script is automatically executed.
The UEFI Shell is launched after connecting possible devices, but
before the reset that is meant to automatically make them visible.
The new PcdUefiShellDefaultBootEnable must be set to TRUE to enable
this behaviour. The Pcd is set to false by default.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Patrik Berglund <patrik.berglund@arm.com>
ArmCpuInfo uses those to read system registers and other parts of EDK2
may find them useful.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
As the ASM_FUNC() macro performs a section switch, the preceding
.balign directive applies the alignment constraint to the current
location in the previous section. As the linker may not merge the
sections in-order, ArmReplaceLiveTranslationEntry() may be left
unaligned.
Replace the explicit invocation of .balign with the ASM_FUNC_ALIGN()
macro, which guarantees the alignment constraint is applied correctly.
To make sure related issues are reliably caught in the future, align the
end of the function before checking the total occupied size. This
ensures crossing a 0x200 boundary will cause a compilation error.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
ArmPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The ELF based toolchains use objcopy to create HII object files, which
contain only a single .hii section. This means no GNU note is inserted
that describes the object as compatible with BTI, even though the lack
of executable code in such an object makes the distinction irrelevant.
However, the linker will not add the note globally to the resulting ELF
executable, and this breaks BTI compatibility.
So let's insert a GNU BTI-compatible ELF note by hand when generating
such object files.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
The GccLto helper library does not contain any code, as its only purpose
is to pull in other libraries that implement intrinsics to which the
linker's codegen pass may emit calls.
So mark it as BTI compatible, so that the linker does not complain about
unannotated objects.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
When building with -mbranch-protection=bti, which affects the compiler
codegen only, ensure that the assembler based codegen is aligned with
this, by emitting the BTI C opcode at the start of each exported
function. While most exported functions are not in fact ever called
indirectly, whether or not this is the case is a property of the caller
so annotating every exported function is a reasonable default.
While at it, fix two occurrences in ArmPkg of exported functions that
did not use the ASM_FUNC() macro.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
To prepare for the enablement of booting EFI with the SCTLR.WXN control
enabled, which makes all writeable memory regions non-executable by
default, introduce a memory type that we will use to describe the flash
region that carries the SEC and PEIM modules that execute in place. Even
if these are implicitly read-only due to the ROM nature, they need to be
mapped with read-only attributes in the page tables to be able to
execute from them.
Also add the XP counterpart which will be used for all normal DRAM right
at the outset.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Non-secure memory is a distinction that only matters when executing code
in the secure world that reasons about the secure vs non-secure address
spaces. EDK2 was not designed for that, and the AArch64 version of the
MMU handling library already treats them as identical, so let's just
drop the ARM memory region types that mark memory as 'non-secure'
explicitly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Currently, the ARM MMU page table logic will break down any block entry
that overlaps with the region being mapped, even if the block entry in
question is using the same attributes as the new region.
This means that creating a non-executable mapping inside a region that
is already mapped non-executable at a coarser granularity may trigger a
call to AllocatePages (), which may recurse back into the page table
code to update the attributes on the newly allocated page tables.
Let's avoid this, by preserving the block entry if it already covers the
region being mapped with the correct attributes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Implement support for read-protected memory by wiring it up to the
access flag in the page table descriptor. The resulting mapping is
implicitly non-writable and non-executable as well, but this is good
enough for implementing this attribute, as we never rely on write or
execute permissions without read permissions.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Currently, the MMU code that is supposed to clear the RO or XP
attributes from a region just clears both unconditionally. This
approximates the desired behavior to some extent, but it does mean that
setting the RO bit first on a code region, and then clearing the XP bit
results both RO and XP being cleared, and we end up with writable code,
and avoiding that is the point of all these protections.
Once we introduce RP support, this will only get worse, so let's fix
this up, by reshuffling the attribute update code to take the entry mask
from the caller, and use the mask to preserve other attributes when
clearing RO or XP.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Split the ARM permission fields in the short descriptors into an access
flag and AP[2:1] as per the recommendation in the ARM ARM. This makes
the access flag available separately, which allows us to implement
EFI_MEMORY_RP memory analogous to how it will be implemented for
AArch64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
With large page support out of the picture, we can treat bits 1 and 0 of
the page descriptor as individual valid and XN bits, instead of treating
XN as a page type. Doing so aligns the handling of the attribute with
the section descriptor layout, as well as the XN handling on AArch64,
and this is beneficial for maintainability.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Large page support on 32-bit ARM is essentially a glorified contiguous
bit where 16 consecutive entries describing a contiguous range with the
same attributes are presented in a way that permits the TLB to cache its
translation with a single entry.
This was never wired up completely, and does not add a lot of value in
EFI, where the page granularity is 4k and we expect to be able to set RO
and XP permissions on individual pages.
Given that large page support complicates the handling of the XN bit at
the page level (which is in a different place depending on whether the
page is small or large), let's just rip it out.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The RealView Debugger is related to RVCT, which is no longer supported.
Given that, remove RvdPeCoffExtraActionLib and code from
RvdPeCoffExtraActionLib which prints lines for use with the RealView
Debugger.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Bob Feng <bob.c.feng@intel.com>
Remove ASSERTs in ArmTrngLibConstructor() that prevent from
booting on DEBUG builds.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4150
GetArmTrngVersion() is used to check the presence of an Arm
Trng. If not found, an ASSERT prevents from booting in DEBUG
builds.
Remove this ASSERT.
Reported-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
ArmTrngLib crashes when run in DEBUG mode due to the fact that it passed
the [truncated] GUID value to a DEBUG() print statement instead of a
pointer to the GUID which is what the %g conversion expects.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The Arm True Random Number Generator Firmware, Interface 1.0,
Platform Design Document
(https://developer.arm.com/documentation/den0098/latest/)
defines an interface between an Operating System (OS) executing
at EL1 and Firmware (FW) exposing a conditioned entropy source
that is provided by a TRNG back end.
The conditioned entropy, that is provided by the Arm TRNG interface,
is commonly used to seed deterministic random number generators.
This patch adds an ArmTrngLib library that implements the Arm TRNG
interface.
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Add a Null instance of ArmHvcLib in case of library dependencies.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The ArmMonitorLib provides an abstract interface to issue
an HyperVisor Call (HVC) or System Monitor Call (SMC) depending
on the default conduit.
The PcdMonitorConduitHvc PCD allows to select the default conduit.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
In order to reduce the likelihood that we will need to rely on the logic
that disables and re-enables the MMU for updating a page table entry
safely, expose the XIP version of the helper routine via a HOB and use
it instead of the one that is copied into DRAM. Since the XIP copy is
already clean to the PoC, and will never end up getting unmapped during
a block entry split, we can use it safely without any cache maintenance,
and without running the risk of pulling the rug from under our feet when
updating an entry by going through an invalid mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Permit the use of this library with the MMU and caches already enabled.
This removes the need for any cache maintenance for coherency, and is
generally better for robustness and performance, especially when running
under virtualization.
Note that this means we have to defer assignment of TTBR0 until the
page tables are ready to be used, and so UpdateRegionMapping() can no
longer read back TTBR0 directly to discover the root table address.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
When updating a page table descriptor in a way that requires break
before make, we temporarily disable the MMU to ensure that we don't
unmap the memory region that the code itself is executing from.
However, this is a condition we can check in a straight-forward manner,
and if the regions are disjoint, we don't have to bother with the MMU
controls, and we can just perform an ordinary break before make.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Drop the optimization that replaces table entries with block entries and
frees the page tables in the subhierarchy that is being replaced. This
rarely occurs in practice anyway, and will require more elaborate TLB
maintenance once we switch to a different approach where we no longer
disable the MMU and nuke the TLB entirely every time we update a
descriptor in a way that requires break-before-make (BBM).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
In an effort to clean the documentation of the above
package, remove duplicated words, and fix a typo while at it.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The warm reboot requests from OSPM are mapped to cold reboot. To handle
the warm reboot separately from a cold reboot, update
ArmSmcPsciResetSystemLib and to invoke the PSCI call with parameters
for warm reboot.
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Hide the Exception implementation details in CpuExcetionHandlerLib and
caller only need to provide buffer
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
CpuExceptionHandlerLib has been refactored with following changes:
1. Removed InitializeCpuInterruptHandlers in 2a09527ebc
2. Removed InitializeCpuExceptionHandlersEx and
added InitializeSeparateExceptionStacks in e7abb94d1f
The patch updates ARM version of CpuExceptionHandlerLib to follow
the API changes.
The functionality to ARM platforms should be none.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
We never run any code at EL0, and so it would seem that any access
permissions set for EL0 (via the AP[1] attribute in the page tables) are
irrelevant. We currently set EL0 and EL1 permissions to the same value
arbitrarily.
However, this causes problems on hardware like the Apple M1 running the
MacOS hypervisor framework, which enters EL1 with SCTLR_EL1.SPAN
enabled, causing the Privileged Access Never (PAN) feature to be enabled
on any exception taken to EL1, including the IRQ exceptions that handle
our timer interrupt. When PAN is enabled, EL1 has no access to any
mappings that are also accessible to EL0, causing the firmware to crash
if it attempts to access such a mapping.
Even though it is debatable whether or not SCTLR_EL1.SPAN should be
disabled at entry or whether the firmware should put all UNKNOWN bits in
all system registers in a consistent state (which it should), using EL0
permissions serves no purpose whatsoever so let's fix that regardless.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Leif Lindholm <leif@nuviainc.com>
New SMC helper functions have been added to reduce the amount of
template code. Update ArmSmcPsciResetSystemLib and
Smbios/ProcessorSubClassDxe to use them.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add functions ArmCallSmc0/1/2/3 to do SMC calls with 0, 1, 2 or 3
arguments.
The functions return up to 3 values.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
LinuxBoot is a firmware that replaces specific firmware functionality
like the UEFI DXE phase with a Linux kernel and runtime. It is built-in
UEFI image like an application, which is executed at the end of DXE
phase.
To achieve the LinuxBoot boot flow "SEC->PEI->DXE->BDS->LinuxBoot",
today we use the common well-known GUID of UEFI Shell for LinuxBoot
payload, so LinuxBoot developers can effortlessly find the UEFI Shell
Application and replace it with the LinuxBoot payload without
recompiling platform EDK2 (There might be an issue with a few systems
that don't have a UEFI Shell). Also, we have a hard requirement to force
the BDS to boot into the LinuxBoot as it is essentially required that
only the LinuxBoot boot option is permissible and UEFI is an
intermediate bootstrap phase. Considering all the above, it is
reasonable to just have a new GUID for LinuxBoot and require a LinuxBoot
specific BDS implementation. In addition, with making the BDS
implementation simpler, we can reduce many DXE drivers which we think it
is not necessary for LinuxBoot booting.
This patch adds a new PlatformBootManagerLib implementation which
registers only the gArmTokenSpaceGuid.PcdLinuxBootFileGuid for LinuxBoot
payload as an active boot option. It allows BDS to jump to the LinuxBoot
quickly by skipping the UiApp and UEFI Shell.
The PlatformBootManagerLib library derived from
ArmPkg/Library/PlatformBootManagerLib.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Moritz Fischer <moritzf@google.com>
This commit adds code which check BootDiscoveryPolicy variable and
calls Boot Policy Manager Protocol to connect device specified by
the variable. To enable that mechanism for platform
EfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy PCD must be
added to DSC file and BootDiscoveryPolicyUiLib should be added to
UiApp libraries.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Changes in ArmPkg to prepare building StandaloneMm firmware for
32bit Arm architectures.
Adds ArmmmuStandaloneMmLib library to the list of the standard
components build for ArmPkg on when ARM architectures.
Changes path of source file AArch64/ArmMmuStandaloneMmLib.c
and compile it for both 32bit and 64bit architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Many of the cache definitions in ArmLibPrivate.h are being used outside
of ArmLib, in Universal/Smbios. Move them into ArmCache.h to make them
public, and remove the include of ArmLibPrivate.h from files in
Universal/Smbios.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The 'cspell' CI test detected some small typos in ArmPkg.
Correct them.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Leif Lindholm
Ard Biesheuvel
Oliver Smith-Denny
Sami Mujawar
Pierre Gondois
Marcin Juszkiewicz
Marvin Häuser
Rebecca Cran
Pranav Madhu
Liu, Zhiguang
Ray Ni
Rebecca Cran
Rebecca Cran
Michael Kubacki
Michael D Kinney
Nhi Pham
Grzegorz Bernacki
Etienne Carriere