Currently, each ARM platform built with RVCT that uses ArmHvcLib
or ArmSmcLib needs to specify a CPU target that implements both the
security and virtualization extensions, so that the assembler does
not choke on the 'hvc' and 'smc' instructions in ArmHvcLib/ArmSvcLib.
Let's move these overrides into the module .INFs so we can lift this
requirement at the platform side.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Flash region needs to be set as cacheable (write back) to increase
performance, if PEI is still XIP on flash or DXE FV is decompressed
from flash FV. However some ARM platforms do not support to set flash
as inner shareable since flash is not normal DDR memory and it will
not respond to cache snoop request, which will causes system hang
after MMU is enabled.
So we need a new ARM memory region attribute WRITE_BACK_NONSHAREABLE
for flash region on these platforms specifically. This attribute will
set the region as write back but not inner shared.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peicong Li <lipeicong@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch adds a library that enables invocation of SVCs from Exception
Level EL0. It will be used by the Standalone MM environment to request
services from a software running in a privileged EL e.g. ARM Trusted
Firmware. The library is derived directly from Arm SMC Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: assign frame pointer (AArch64)
keep stack alignment (ARM)]
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Process any capsule HOBs that were left for us by CapsulePei. This
involves calling ProcessCapsules() twice, as explained in the comment
in DxeCapsuleLibFmp [sic].
1) The first call must be before EndOfDxe. The system capsules is processed.
If device capsule FMP protocols are exposted at this time and device FMP
capsule has zero EmbeddedDriverCount, the device capsules are processed.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule and
all capsules are processed.
If not all capsules are processed, reset will be defered to second call.
2) The second call must be after EndOfDxe and after ConnectAll, so that all
device capsule FMP protocols are exposed.
The system capsules are skipped. If the device capsules are NOT processed
in first call, they are processed here.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule
processed in first call and second call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARMv8.2-FP16 extension introduces support for half precision
floating point and the processor ID registers have been updated to
enable detection of the implementation.
The possible values for the FP bits in ID_AA64PFR0_EL1[19:16] are:
- 0000 : Floating-point is implemented.
- 0001 : Floating-point including Half-precision support is
implemented.
- 1111 : Floating-point is not implemented.
- All other values are reserved.
Previously ArmEnableVFP() compared the FP bits with 0000b to see if
the FP was implemented, before enabling FP. Modified this check to
enable the FP if the FP bits 19:16 are not 1111b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that we have a generic DmaLib implementation for non-coherent DMA,
let's get rid of the ARM specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that ArmDmaLib can take care of its own memory allocation needs,
let's get rid of UncachedMemoryAllocationLib entirely. This forces
platforms to declare the required semantics (non-cache coherent DMA,
whichever way it is implemented), rather than using uncached memory
allocations directly, which may not always be the right choice, and
prevents sharing of drivers between platforms if one is cache coherent
and the other is not.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that ArmDmaLib no longer uses uncached mappings for short-lived
bounce buffers used for streaming DMA, the only place we allocate
uncached memory is in DmaAllocateBuffer (), which is used for static
mappings shared between the host and the device, e.g., for packet
descriptor rings etc.
There is no performance concern around such long lived mappings, and
so we can really do without the overhead of UncachedMemoryAllocationLib,
which is a sizable chunk of poorly maintained code that never actually
releases any memory, and despite the fact that it implements pool based
routines, it always performs page based allocations anyway.
So let's invoke the DXE services directly to manage memory attributes
on allocations, and keep track of the allocations in a linked list so
we can restore the attributes and free the memory properly after use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ArmPkg implementation of DmaLib uses double buffering to ensure
that any attempt to perform non-coherent DMA on unaligned buffers cannot
corrupt adjacent unrelated data which happens to share cachelines with
the data we are exchanging with the device.
Such corruption can only occur on bus master write, in which case we have
to invalidate the caches to ensure the CPU will see the data written to
memory by the device. In the bus master read case, we can simply clean
and invalidate at the same time, which may purge unrelated adjacent data
from the caches, but will not corrupt its contents.
Also, this double buffer does not necessarily have to be allocated from
uncached memory: by the same reasoning, we can perform cache invalidation
on an ordinary pool allocation as long as we take the same alignment
constraints into account.
So update our code accordingly: remove double buffering from the bus
master read path, and switch to a pool allocation for the double buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Move IS_DEVICE_PATH_NODE into header to share it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This adds an implementation of the ResetSystemLib library class as
defined in MdeModulePkg. It is used as the platform glue by the generic
ResetSystemRuntimeDxe which lives in the same package.
This implementation is intended to replace the EfiResetSystemLib based
implementation that is deprecated now that we have decided that there is
no longer a reason to keep a different ResetSystem() implementation
under EmbeddedPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM ArmHvcLib looks like it was created from copy of ArmSmcLib which
looks like it was created from a copy of the AArch64 version.
Both of these files include AsmMacroIoLibV8.h instead of
AsmMacroIoLib.h, although since they only use macros that are identical
between the two, there was no functional issue caused by this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In order to be able to produce meaningful diagnostic output when taking
synchronous exceptions that have been caused by corruption of the stack
pointer, prepare the EL0 stack pointer and switch to it when handling the
'Sync exception using SPx' exception class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we only attempt to walk the call stack and print a backtrace
if the program counter refers to a location covered by a PE/COFF image.
However, regardless of the value of PC, the frame pointer may still have
a meaningful value, and so we can still produce the remainder of the
backtrace.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add the gEfiDebugImageInfoTableGuid, which is referenced in the code,
to both .INF files describing this module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the duplicated and outdated code in QuietBoot.c with a reference
to BootLogoLib, which provides the same functionality. This also allows
us to drop all references to IntelFrameworkModulePkg in this module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of indirecting the reference to the Shell binary via a PCD
that is defined in IntelFrameworkModulePkg, and which invariably
gets set to the same value by all users of this library, refer to
the UEFI Shell application by its declared symbolic GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit e7b24ec978 ("ArmPkg/UncachedMemoryAllocationLib: map uncached
allocations non-executable") adds code that manipulates the GCD memory
space attributes of a newly allocated uncached region without checking
whether this region expose these attributes in its capabilities mask.
Given that the intent is to remove executable permissions from the region,
this is a fairly pointless exercise to begin with, regardless of whether
it is correct or not. The reason is that RO/XP memory attributes in the
GCD memory space map or the UEFI memory map are completely disconnected
from the actual mapping permissions used in the page tables.
So instead, invoke the CPU arch protocol directly, and add the non-exec
attributes in the page tables directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
modsi3.S references the symbol '__divsi3' by '___divsi3' which assumes
the prefix is always required and supported. Use ASM_PFX() instead
to support all compilers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
The primary use case for UncachedMemoryAllocationLib is non-coherent DMA,
which implies that such regions are not used to fetch instructions from.
So let's map them as non-executable, to avoid creating a security hole
when the rest of the platform may be enforcing strict memory permissions
on ordinary allocations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Uncached pool allocations are aligned to the data cache line length under
the assumption that this is sufficient to prevent cache maintenance from
corrupting adjacent allocations. However, the value to use in such cases
is architecturally called the Cache Writeback Granule (CWG), which is
essentially the maximum Dcache line length rather than the minimum.
Note that this is mostly a cosmetical fix, given that the pool allocation
is turned into a page allocation later, and rounded up accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In order to play nice with platforms that use strict memory permission
policies, restore the original mapping attributes when freeing uncached
allocations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that we have the prerequisite functionality available in ArmMmuLib,
wire it up into ArmSetMemoryRegionNoExec, ArmClearMemoryRegionNoExec,
ArmSetMemoryRegionReadOnly and ArmClearMemoryRegionReadOnly. This is
used by the non-executable stack feature that is configured by DxeIpl.
NOTE: The current implementation will not combine RO and XP attributes,
i.e., setting/clearing a region no-exec will unconditionally
clear the read-only attribute, and vice versa. Currently, we
only use ArmSetMemoryRegionNoExec(), so for now, we should be
able to live with this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We no longer make use of the ArmMmuLib 'feature' to create aliased
memory ranges with mismatched attributes, and in fact, it was only
wired up in the ARM version to begin with.
So remove the VirtualMask argument from ArmSetMemoryAttributes()'s
prototype, and remove the dead code that referred to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
... where it belongs, since AARCH64 already keeps it there, and
non DXE users of ArmMmuLib (such as DxeIpl, for the non-executable
stack) may need its functionality as well.
While at it, rename SetMemoryAttributes to ArmSetMemoryAttributes,
and make any functions that are not exported STATIC. Also, replace
an explicit gBS->AllocatePages() call [which is DXE specific] with
MemoryAllocationLib::AllocatePages().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The routines ArmConfigureMmu(), SetMemoryAttributes() [*] and the
various set/clear read-only/no-exec routines are declared as returning
EFI_STATUS in the respective header files, so align the definitions with
that.
* SetMemoryAttributes() is declared in the wrong header (and defined in
ArmMmuLib for AARCH64 and in CpuDxe for ARM)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The debug implementation of the UncachedMemoryAllocationLib library
class relies on the creation of an uncached alias of a memory range,
while keeping the original cached mapping, but with read-only attributes
to trap inadvertent write accesses.
This is not a terribly good idea, given that the ARM architecture does
not allow mismatched attributes, and so creating them deliberately is
not something we should encourage by doing it in reference code.
So remove the library, and replace all references to it with a reference
to the non-debug version (unless the platform does not require a resolution
for it in the first place, in which case all UncachedMemoryAllocationLib
references can be removed altogether).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable the hardware stack alignment check, as mandated by the UEFI spec.
This ensures that the stack pointer is 16 byte aligned at each instance
where it is used as the base address in a load/store operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of enabling stack alignment checking, which is mandated
by the UEFI spec for AARCH64, add the code to manage this bit to ArmLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Stack and unstack the frame pointer according to the AAPCS in
AArch64AllDataCachesOperation ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Since the new DXE page protection for PE/COFF images may invoke
EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes() with only permission
attributes set, add support for this in the AARCH64 MMU code.
Move the EFI_MEMORY_CACHETYPE_MASK macro to a shared location between
CpuDxe and ArmMmuLib so we don't have to introduce yet another
definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current Arm CpuDxe driver uses EFI_MEMORY_WP for write protection,
according to UEFI spec, we should use EFI_MEMORY_RO for write protection.
The EFI_MEMORY_WP is the cache attribute instead of memory attribute.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit d32702d2c2.
Using a pool allocation for the root translation table seemed like
a good idea at the time, but as it turns out, such allocations are
handled in a way that makes them unsuitable for this purpose: they
are backed by HOBs that don't remain in the same place during the
various PI phase changes, which means the address programmed into
the TTBR register is no longer valid, and may refer to memory that
is reported as available to the OS.
So switch back to using a page based allocation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The generic timer support libraries call the actual system register
accessor function via a single pair of functions ArmArchTimerReadReg()
and ArmArchTimerWriteReg(), which take an enum argument to identify
the register, and return output values by pointer reference.
Since these functions are never called with a non-immediate argument,
we can simply replace each invocation with the underlying system register
accessor instead. This is mostly functionally equivalent, with the
exception of the bounds check for the enum (which is pointless given the
fact that we never pass a variable), the check for the presence of the
architected timer (which only makes sense for ARMv7, but is highly unlikely
to vary between platforms that are similar enough to run the same firmware
image), and a check for enum values that refer to the HYP view of the timer,
which we never referred to anywhere in the code in the first place.
So get rid of the middle man, and update the ArmGenericTimerPhyCounterLib
and ArmGenericTimerVirtCounterLib implementations to call the system
register accessors directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Commit 0a99a65d2c ("fix incorrect device address of double buffer")
retained an explicit cast on the variable "Buffer" which became
incorrect with the other changes, leading to compilation failures
with some toolchains. Drop the cast.
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some devices, such as the Raspberry Pi3, have a fixed offset between memory
addresses as seen by the host and as seen by the other bus masters. So add
a new PCD that allows this fixed offset to be recorded, and to be used when
returning device addresses from the DmaLib mapping routines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of adding support to ArmDmalib for DMA bus masters whose
view of memory is offset by a constant compared to the CPU's view, clean
up some abuse of the device address.
The device address is not defined in terms of the CPU's address space,
and so it should not be used in CopyMem () or cache maintenance operations
that require a valid mapping. This not only applies to the above use case,
but also to the DebugUncachedMemoryAllocationLib that unmaps the
primary, cached mapping of an allocation, and returns a host address
which is an uncached alias offset by a constant.
Since we should never access the device address from the CPU, there is
no need to record it in the MAPINFO struct. Instead, record the buffer
address in case of double buffering, since we do need to copy the contents
(in case of a bus master write) and free the buffer (in all cases) when
DmaUnmap() is called.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If double buffering is not required in DmaMap(), the returned device
address is passed through ConvertToPhysicalAddress () to convert the
host address (which in case of DebugUncachedMemoryAllocationLib is not
1:1 mapped) to a physical address, which is what a device would expect
to be able to perform DMA.
By the same reasoning, a double buffer allocated using DmaAllocateBuffer ()
should be converted in the same way, considering that the buffer is allocated
using UncachedAllocatePages (), to which the above equally applies.
So add the missing ConvertToPhysicalAddress () invocation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of depending on ArmLib to retrieve the CWG directly, use
the DMA buffer alignment exposed by the CPU arch protocol. This
removes our dependency on ArmLib, which makes the library a bit
more architecture independent.
While we're in there, rename gCpu to mCpu to better reflect its
local scope, and reflow some lines that we're modifying anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Translation table walks are always cache coherent on ARMv8-A, so cache
maintenance on page tables is never needed. Since there is a risk of
loss of coherency when using mismatched attributes, and given that memory
is mapped cacheable except for extraordinary cases (such as non-coherent
DMA), restrict the page table walker to performing cacheable accesses to
the translation tables.
For DEBUG builds, retain some of the logic so that we can double check
that the memory holding the root translation table is indeed located in
memory that is mapped cacheable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This missing dependency has gone unnoticed until now, but it is breaking
the Omap35xxPkg.dsc build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
AsciiStrCat() is deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
The caller of CpsrString() is required to pass in "ReturnStr" with 32
CHAR8 elements. (DefaultExceptionHandler() complies with this.) "Str" is
used to build "ReturnStr" gradually. Just before calling AsciiStrCat(),
"Str" points to the then-terminating NUL character in "ReturnStr".
The difference (Str - ReturnStr) gives the number of non-NUL characters
we've written thus far, hence (32 - (Str - ReturnStr)) yields the number
of remaining bytes in ReturnStr, including the ultimately terminating NUL
character.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Zimmermann <sigmaepsilon92@gmail.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=164
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
AsciiStrCat() is deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
The "Str" variable serves no particular purpose in the MRegList() and
ThumbMRegList() functions; replace it with the pointed-to "mMregListStr" /
"mThumbMregListStr" global variable (as appropriate), so that the new
AsciiStrCatS() calls are as clear as possible.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Zimmermann <sigmaepsilon92@gmail.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=164
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
All users have moved to the generic or accelerated versions in MdePkg,
so remove the obsolete BaseMemoryLibStm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As reported by Eugene, the practice of sizing the address space in the
virtual memory system based on the maximum address in the table passed
to ArmConfigureMmu() is problematic, since it fails to take into account
the fact that the GCD memory space may be extended at a later time, both
for memory and for MMIO. So instead, choose the VA size identical to the
GCD memory map size, which is based on PcdPrePiCpuMemorySize on ARM
systems.
Reported-by: Eugene Cohen <eugene@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we allocate a full page for the root translation table, even
if the configured translation only requires two entries (16 bytes) for
the root level, which happens to be the case for a 40 bit VA. Likewise,
for a 36-bit VA space, the root table only needs 16 entries of 8 bytes
each, adding up to 128 bytes.
So switch to a pool allocation for the root table if we can, but take into
account that the architecture requires it to be naturally aligned to its
size, i.e., a 64 byte table requires 64 byte alignment, whereas pool
allocations in general are only guaranteed to be aligned to 8 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In commit 7d189f99d8 ("ArmPkg/Mmu: Fix bug of aligning new allocated
page table"), we fixed a flaw in the logic regarding alignment of newly
allocated translation table pages. However, we all failed to spot that
aligning page based allocations to page size is rather pointless to
begin with, so simply allocate a single page each time we add new pages
to the translation tables.
Also, drop the unnecessary cast.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The relations between T0SZ, the number of translation levels and the
size/alignment of the root table can be expressed in simple arithmetic
expressions, so get rid of the lookup table.
Note that this disregards the fact that the maximum value of T0SZ is
39 not 42 (as one would expect for the smallest VA size using 2 levels)
but since this corresponds to a VA size of 32 MB and 4 MB, respectively,
neither of which are sufficient to run UEFI, we can safely ignore the
distinction.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As reported by Vishal, the new backtrace output would be more useful if
it did not contain the full absolute path of each module in the list.
So strip off everything up to the last forward slash or backslash in the
string.
Example output:
IRQ Exception at 0x000000005EF110E0
DxeCore.dll loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EF121F0) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EF1289C) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEFB6B4) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEFAA44) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEFB450) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEF938C) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEF8D04) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEFA8E8) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEF3C14) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEF3E48) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EF0C838) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEEF70C) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEEE93C) loaded at 0x000000005EEED000
called from DxeCore.dll (0x000000005EEEE024) loaded at 0x000000005EEED000
Suggested-by: "Oliyil Kunnil, Vishal" <vishalo@qti.qualcomm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For historical reasons, the files under ArmLib are split up into 'common'
files under Common/, containing common C files as well as AArch64 and Arm
specific asm files, and ArmV7 and AArch64 files under ArmV7/ and AArch64/,
respectively. This presumably dates back to the time when ArmLib supported
different revisions of the 32-bit architecture (i.e., pre-V7)
Since the PI spec requires V7 or later, we can simplify this to Arm/ and
AArch64, which aligns ArmLib with the majority of other modules that carry
ARM or AArch64 specific code.
So move the files around so that shared files live at the same level as
ArmBaseLib.inf, and ARM/AArch64 specific files live in Arm/ or AArch64/,
respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ArmBaseLib timer code does not depend on MemoryAllocationLib at
all, so remove the #includes referring to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This removes the following ArmLib implementation, which were, apart from
the fact that they targeted either ARM or AARCH64, fully identical:
ArmPkg/Library/ArmLib/AArch64/AArch64Lib.inf
ArmPkg/Library/ArmLib/AArch64/AArch64LibPei.inf
ArmPkg/Library/ArmLib/AArch64/AArch64LibPrePi.inf
ArmPkg/Library/ArmLib/AArch64/AArch64LibSec.inf
ArmPkg/Library/ArmLib/ArmV7/ArmV7Lib.inf
ArmPkg/Library/ArmLib/ArmV7/ArmV7LibPrePi.inf
ArmPkg/Library/ArmLib/ArmV7/ArmV7LibSec.inf
Only ArmBaseLib remains, which can fulfil the dependencies upon each of
the listed flavors.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Introduce a new ArmLib version ArmBaseLib, which encapsulates the ARM
version ArmV7Lib and the AArch64 version AArch64Lib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove the NULL instance of ArmLib: it is not currently used, and its
usefulness its dubious.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When dumping the CPU state after an unhandled fault, walk the stack
frames and decode the return addresses so we can show a minimal
backtrace. Unfortunately, we do not have sufficient information to
show the function names, but at least we can see the modules and the
return addresses inside the modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Clang does not like separate definitions for the __alias__ and the
__weak__ attributes, so merge the definitions into one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
After the recent update of CompilerIntrinsicsLib, our memset() is no
longer emitted as a weak symbol. On ARM, this may cause problems when
combining this library with another library that supplies memset() [e.g.,
CryptoPkg/IntrinsicLib], due to the fact that the object also supplies
the __aeabi_memXXX entry points, which can only be satisfied by this
object. So make our memset() weak again, to let the other implementation
take precedence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BaseMemoryLib has recently been extended with an API function
IsZeroBuffer(), so copy the default implementation into BaseMemoryLibStm
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BaseMemoryLib has recently been extended with an API function
IsZeroGuid(), so copy the default implementation into BaseMemoryLibStm
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseMemoryLibVstm implementation of BaseMemoryLib is ARM only, uses
the NEON register file despite the fact that the UEFI spec does not allow
it, and is currently not used anywhere. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This replaces the various implementations of memset and memcpy,
including the ARM RTABI ones (__aeabi_mem[set|clr]_[|4|8]) with
a single C implementation for each. The ones we have are either not
very sophisticated (ARM), or they are too sophisticated (memcpy() on
AARCH64, which may perform unaligned accesses) or already coded in C
(memset on AArch64).
The Tianocore codebase mandates the explicit use of its SetMem() and
CopyMem() equivalents, of which various implementations exist for use
in different contexts (PEI, DXE). Few compiler generated references to
these functions should remain, and so our implementations in this BASE
library should be small and usable with the MMU off.
So replace them with a simple C implementation that builds correctly
on GCC/AARCH64, CLANG/AARCH64, GCC/ARM, CLANG/ARM and RVCT/ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections. Note that in some cases, various entry points
refer to different parts of the same routine, so in those cases,
the files have been left untouched.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The C language is powerful enough to implement a function that does
absolutely nothing, so there is no need to resort to implementations
in assembler for various toolchains/architectures.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The function ArmReplaceLiveTranslationEntry() has been moved to
ArmMmuLib, so remove the old implementation from ArmLib.
Note that the new implementation was not exported from the object file,
and so references to it were satisfied by the old version residing in
ArmLib. Since we are removing that one, we need to export the new one
at the same time to prevent the linker from bailing with undefined
reference errors.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM compiler intrinsics library defines __aeabi_memset() and
memset() in the same object, which means that both will be pulled
in if either is referenced.
The IntrinsicLib in CryptoPkg defines its own, preferred memset(),
which may clash with our memset(). So make our version weak.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Building ArmSoftFloatLib with LTO results in errors like
.../bin/ld: softfloat.obj: plugin needed to handle lto object
.../bin/ld: __aeabi_dcmpge.obj: plugin needed to handle lto object
.../bin/ld: __aeabi_dcmplt.obj: plugin needed to handle lto object
.../bin/ld: internal error ../../ld/ldlang.c 6299
This library is only linked by OpensslLib at the moment, and only
marginally used at runtime, so just disable LTO for it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GCC in LTO mode interoperates poorly with non-standard libraries that
provide implementations of compiler intrinsics such as memcpy/memset
or the stack protector entry points. Such libraries need to be built
in non-LTO mode, and then referenced explicitly on the linker command
line using a -plugin-opt=-pass-through=-lxxx linker option.
However, if these intrinsics are also referenced directly, the LTO
version of the code will be pulled in, and will happily satisfy all
other references to the same symbol.
So add a pair of glue libraries, for ARM and AARCH64, that reference
the known intrinsics. Since the binaries live under ArmPkg directly,
we can reference them in tools_def.txt. Under LD garbage collection,
the object itself will be pruned, and so will the intrinsics that end
up unused by the module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmLib defines a prototype for the ArmReadSctlr() function, but the
AArch64 implementation is missing. So add it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: John Powell <john.powell@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: update commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This introduces a special version of ArmMmuLib for PEIMs that takes care
only to perform cache maintenance on the live entry replacement routine
if the module is not executing in place. Not only is such cache maintenance
unnecessary in that case, it may be actively harmful on some systems that
fail to tolerate cache maintenance operations on NOR flash regions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Switch all users of ArmLib that depend on the MMU routines to the new,
separate ArmMmuLib. This needs to occur in one go, since the MMU
routines are removed from ArmLib build at the same time, to prevent
conflicting symbols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This base library encapsulates the MMU manipulation routines that have been
factored out of ArmLib. The functionality covers initial creation of the 1:1
mapping in the page tables, and remapping regions to change permissions or
cacheability attributes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Putting DEBUG () code after an ASSERT (FALSE) statement is not very
useful, since the code will be unreachable on DEBUG builds and compiled
out on RELEASE builds. So move the ASSERT () statement after it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
On some platforms, performing cache maintenance on regions that are backed
by NOR flash result in SErrors. Since cache maintenance is unnecessary in
that case, create a PEIM specific version that only performs said cache
maintenance in its constructor if the module is shadowed in RAM. To avoid
performing the cache maintenance if the MMU code is not used to begin with,
check that explicitly in the constructor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This implements the platform glue for the new generic BDS implementation.
It is based on the ArmVirtQemu version, with the QEMU references removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of cleaning the data cache to the PoU by virtual address and
subsequently invalidating the entire I-cache, invalidate only the
range that we just cleaned. This way, we don't invalidate other
cachelines unnecessarily.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When we split a block entry into a table entry, the UXN/PXN/XN permission
attributes are inherited both by the new table entry and by the new block
entries at the next level down. Unlike the NS bit, which only affects the
next level of lookup, the XN table bits supersede the permissions of the
final translation, and setting the permissions at multiple levels is not
only redundant, it also prevents us from lifting XN restrictions on a
subregion of the original block entry by simply clearing the appropriate
bits at the lowest level.
So drop the code that sets the UXN/PXN/XN bits on the table entries.
Reported-by: "Oliyil Kunnil, Vishal" <vishalo@qti.qualcomm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DmaMap () only allows uncached mappings to be used for creating consistent
mappings with operation type MapOperationBusMasterCommonBuffer. However,
if the buffer passed to DmaMap () happens to be aligned to the CWG, there
is no need for a bounce buffer, and we perform the cache maintenance
directly without ever checking if the memory attributes of the buffer
adhere to the API.
So add some debug code that asserts that the operation type and the memory
attributes are consistent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In the DmaMap () operation, if the region to be mapped happens to be
aligned to the Cache Writeback Granule (CWG) (whose value is typically
64 or 128 bytes and 2 KB maximum), we remap the memory as uncached.
Since remapping memory occurs at page granularity, while the buffer and the
CWG may be much smaller, there is no telling what other memory we affect
by doing this, especially since the operation is not reverted in DmaUnmap().
So remove the remapping call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DmaMap () operations of type MapOperationBusMasterCommonBuffer should
return a mapping that is coherent between the CPU and the device. For
this reason, the API only allows DmaMap () to be called with this operation
type if the memory to be mapped was allocated by DmaAllocateBuffer (),
which in this implementation guarantees the coherency by using uncached
mappings on the CPU side.
This means that, if we encounter a cached mapping in DmaMap () with this
operation type, the code is either broken, or someone is violating the
API, but simply proceeding with a double buffer makes no sense at all,
and can only cause problems.
So instead, actively reject this operation type for cached memory mappings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Comparing a GCD attribute field directly against EFI_MEMORY_UC and
EFI_MEMORY_WT is incorrect, since it may have other bits set as well
which are not related to the cacheability of the region. So instead,
test explicitly against the flags EFI_MEMORY_WB and EFI_MEMORY_WT,
which must be set if the region may be mapped with cacheable attributes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We manage to use both an AND operation with 'gCacheAlignment - 1' and a
modulo operation with 'gCacheAlignment' in the same compound if statement.
Since gCacheAlignment is a global of which the compiler cannot guarantee
that it is a power of two, simply use the AND version in both cases.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The allocation function UncachedAllocatePages () may return NULL, in
which case our implementation of DmaAllocateBuffer () should return
EFI_OUT_OF_RESOURCES rather than silently ignoring the NULL value and
returning EFI_SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This adds a partial stack dump (256 bytes at either side of the stack
pointer) to the CPU state dumping routine that is invoked when taking an
unexpected exception. Since dereferencing the stack pointer may itself
fault, ensure that we don't enter the dumping routine recursively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
The default exception handler, which is essentially the one that is invoked
for unexpected exceptions, ends with an ASSERT (FALSE), to ensure that
execution halts after dumping the CPU state. However, ASSERTs are compiled
out in RELEASE builds, and since we simply return to wherever the ELR is
pointing, we will not make any progress in case of synchronous aborts, and
the same exception will be taken again immediately, resulting in the string
'Exception at 0x....' to be printed over and over again.
So use an explicit deadloop instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
On ARM, manipulating live page tables is cumbersome since the architecture
mandates the use of break-before-make, i.e., replacing a block entry with
a table entry requires an intermediate step via an invalid entry, or TLB
conflicts may occur.
Since it is not generally feasible to decide in the page table manipulation
routines whether such an invalid entry will result in those routines
themselves to become unavailable, use a function that is callable with
the MMU off (i.e., a leaf function that does not access the stack) to
perform the change of a block entry into a table entry.
Note that the opposite should never occur, i.e., table entries are never
coalesced into block entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Now XN attribute will be set automatically if the region is declared
as device memory. However, the function ArmMemoryAttributeToPageAttribute
is to get attribute for block and page descriptors, not for table
descriptors, so attribute TT_TABLE_*XN does not really take effect.
Need to use TT_*XN_MASK instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some minor typographical problems were noticed during previous commits.
This change corrects those, and contains no functional modifications.
The changes are in comments, and one diagnostic message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The TimerFreq variable in the TimerConstructor() is unused in RELEASE
builds since ASSERTs are then disabled.
The only use of the variable (in the ASSERT) is replaced by a direct
invocation of the function previously used to set it.
NOTE: The build tools suppress warnings of this using compiler options
eg. -Wno-unused-but-set-variable for GCC toolchain or
--diag_suppress=550 for RVCT toolchain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
FirmwarePerformanceDxe.c utilizes the Timer Library function
GetTimeInNanoSecond() which was not implemented by the ArmArchTimerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This refactors some timer code to define MultU64xN as a preprocessor
symbol rather than a function pointer, and to factor out the code that
obtains the timer frequency into GetPlatformTimerFreq ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
[ard.biesheuvel: split off from 'add GetTimeInNanoSecond() to ArmArchTimerLib']
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The function ArmClearMemoryRegionReadOnly() was supposed to undo the
effect of ArmSetMemoryRegionReadOnly(), but instead, it sets the permissions
to EL0-no access, EL1-read-only. Since the EL0 bit should be 1 to align
with EL2/3 (where the bit is SBO), use TT_AP_RW_RW instead, which makes the
entry read-write for EL0 when executing at EL1, and read-write for all other
levels.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This replaces the somewhat opaque preprocessor based stack/unstack macros
with open coded ldp/stp sequences to preserve the interrupted context
before handing over to the exception handler in C.
This removes various arithmetic operations on the stack pointer, and
reduces the exception return critical section to its minimum size (i.e.,
the bare minimum required to populate the ELR and SPSR registers and invoke
the eret).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
If we are using the vector table in place, there is no need to make an
indirect call to the common handler routine from the vector table entries,
so just use a straight branch instruction in that case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
The global gArmRelocateVectorTable is a build time constant, but due to
its external linkage and lack of constness, the compiler does not see that.
So turn it into a static boolean, and at the same time, make the function
CopyExceptionHandlers() (which is only called if gArmRelocateVectorTable is
set) static as well, so that the compiler can eliminate it completely if
we are using the vector table in place.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
ESR and FAR are populated by the hardware upon exception entry, and
describe the exception, not the interrupted context. So there is no point
in restoring their values before returning from the exception.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
We have three code paths to stack/unstack the exception context, one for
each of EL3, EL2 and EL1. However, they all access the same copy of FPSR
so move that access to the common path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Unlike the AArch32 vector table, which has room for a single instruction
for each exception type, the AArch64 exception table has 128 byte slots,
which can easily hold the shared prologues that are emitted out of line.
So refactor this code into a single macro, and expand it into each vector
table slot. Since the address of the command handler entry point is no
longer patched in by the C code, we can just emit the literal into each
vector entry directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Introduce ARM and AArch64 instances of the CpuExceptionHandlerLib which
provides exception handling and registration of handlers regardless of
execution phase.
Two variants of the ArmExceptionLib are provided: one where exception
handlers reside within the module (meeting appropriate architectural
alignment requirements for the vector table) and another one that will
relocate a copy of thee xception handlers to an address specified by
PcdCpuVectorBaseAddress. The ArmRelocateExceptionLib is intended for use
in cases where ArmExceptionLib is too large for the application
(uncompressed XIP images) as driven by the vector table alignment padding.
The AArch64 build of this library supports execution at EL1, EL2, and EL3
exception levels.
Tested on ARM, and AArch64 with SEC, DXE Core, and CpuDxe modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add ArmReadHcr() to ArmLib to enable read-modify-write of the HCR system
register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Architecturally, the TTBCR register value is undefined at reset for
Non-Secure.
On some platforms the reset value for TTBCR is not zero and
this causes a data abort exception once the MMU is enabled.
This patch configures the TTBCR register to enable translation table
walk using TTBR0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
The AArch64 DAIF bits are different for reading (mrs) versus writing
(msr). The bitmask definitions assumed they were the same causing
incorrect results when trying to determine the current interrupt
state through ArmGetInterruptState.
The logic for interpreting the DAIF read data using the csel instruction
was also incorrect and is fixed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Modify the DefaultExceptionHandler (uefi-variant) so it can be used by
DxeCore (via CpuExceptionHandlerLib) where the debug info table is not
yet published at library constructor time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some updates to SCR can cause a problem which manifests as an undefined opcode exception.
This may be when a speculative secure instruction fetch happens after the NS bit is set.
An isb is required to make the register change take effect fully.
Contributed-under: Tianocore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <Evan.Lloyd@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19778 6f19259b-4bc3-4df7-8a09-765794883524
The RVCT compiler may emit calls to the various __aeabi_c?cmp??
functions, which return their results via the CPU condition flags
C and Z. According to ARM doc IHI 0043D 'Run-time ABI for the ARM
architecture':
The 3-way comparison functions c*cmple, c*cmpeq and c*rcmple return
their results in the CPSR Z and C flags. C is clear only if the operands
are ordered and the first operand is less than the second. Z is set only
when the operands are ordered and equal.
Add implementations for the double and float variants of the above.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19327 6f19259b-4bc3-4df7-8a09-765794883524
Commit SVN r18778 made all mappings of normal memory (inner) shareable,
even on hardware that implements shareability as uncached accesses.
The original concerns that prompted the change, regarding coherent DMA
and virt guests migrating between CPUs, do not apply to such hardware,
so revert to the original behavior in that case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19285 6f19259b-4bc3-4df7-8a09-765794883524
The -fno-tree-vrp option is not required for GCC 4.8 or later, and is not
supported by CLANG. So restrict its use to GCC 4.6 and 4.7, which are the
oldest versions we support for ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19283 6f19259b-4bc3-4df7-8a09-765794883524
The open coded access to co-processor #10 to set FPEXC is not supported
by the CLANG assembler, but the architecturally correct VMSR instruction
is not supported by older binutils. So keep the former unless __clang__
is defined.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19282 6f19259b-4bc3-4df7-8a09-765794883524
CLANG for ARM may emit calls to __aeabi_memset(), which is subtly different
from the default memset() [arguments 2 and 3 are reversed]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19281 6f19259b-4bc3-4df7-8a09-765794883524
The CLANG assembler does not support the legacy, non-unified assembler syntax,
i.e., it does not support the reordering of the condition suffixes with the
increment/decrement before/after or byte/word suffixes, and it does not
recognize the 'empty descending' (ED) suffix at all. So move to the unified
syntax, and replace 'empty descending' with 'decrement after' or 'increment
before' as appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19280 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the ArmPkg variant of InvalidateInstructionCacheRange to
flush the data cache only to the point of unification (PoU). This improves
performance and also allows invalidation in scenarios where it would be
inappropriate to flush to the point of coherency (like when executing code
from L2 configured as cache-as-ram).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Added AARCH64 and ARM/GCC implementations of the above.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19174 6f19259b-4bc3-4df7-8a09-765794883524
This has the effect of splitting assembly functions into their own sections
so the linker can remove unused ones to save space.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19109 6f19259b-4bc3-4df7-8a09-765794883524
In SVN 18756 ("disallow whole D-cache maintenance operations")
InvalidateInstructionCache was modified to remove the full data cache
clean but left the full instruction cache invalidate. The change was
made to address issues in the set/way clean methodology but the
resulting code could lead someone to a painful debug. If a component
called this function, the proper code would not be flushed to the PoU,
since the intent of this function is not only to invalidate the I-cache
but to provide coherency after code loading / modification. This change
simply places an ASSERT(FALSE) in this function to avoid this hazard.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19084 6f19259b-4bc3-4df7-8a09-765794883524
The ARM softfloat library in ArmSoftfloatLib currently does not build
under RVCT, simply because the code includes system header files that
RVCT does not provide. However, nothing exported by those include files
is actually used by the library when built in SOFTFLOAT_FOR_GCC mode,
so we can just drop all of them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19031 6f19259b-4bc3-4df7-8a09-765794883524
In order to support software floating point in the context of
DXE drivers etc, this factors out the core ARM softfloat support
into a separate library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19030 6f19259b-4bc3-4df7-8a09-765794883524
The BdsLib implementation under ArmPkg never references
gArmGlobalVariableGuid so it should not list it as a dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18997 6f19259b-4bc3-4df7-8a09-765794883524
As of SVN 15115, the PEI core needs a MigratePeiServicesTablePointer function.
Background: The ArmPkg variant of the PeiServicesTablePointerLib implements
the standard PEI Services table retrieval mechanism as defined in the
PI Specification Volume 1 section 5.4.4 using the TPIDRURW registers.
No special action is required on ARM to migrate the PEI Services table
pointer after main memory initialization but a function must be implemented
nonetheless.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18953 6f19259b-4bc3-4df7-8a09-765794883524
RVCT (the proprietary 32-bit ARM compiler) warns about Node potentially being
used uninitialized, so initialize it to NULL explicitly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18952 6f19259b-4bc3-4df7-8a09-765794883524
The way the v7 MMU code is invoked by the Xen port is somewhat of
a pathological case, since it describes its physical memory space
using a single cacheable region that covers the entire addressable
range. When clipping this region to the part that is 1:1 addressable,
we end up with a region of exactly 4 GB in size, which just exceeds
the range of the UINT32 variable we use in FillTranslationTable() to
track our progress while populating the page tables. So promote it
to UINT64 instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18930 6f19259b-4bc3-4df7-8a09-765794883524
It is implied that the memory returned from UncachedMemoryAllocationLib
should have cache invalidated. So we invalidate memory range after
changing memory attribute to uncached.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18920 6f19259b-4bc3-4df7-8a09-765794883524
In ArmLib, there exists an alias for ArmDataSynchronizationBarrier,
named after one of several names for the pre-ARMv6 cp15 operation that
was formalised into the Data Synchronization Barrier in ARMv6.
This alias is also the one called from within ArmLib, in preference of
the correct name. Through the power of code reuse, this name slipped
into the AArch64 variant as well.
Expunge it from the codebase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18915 6f19259b-4bc3-4df7-8a09-765794883524
We currently rely on .align directives to ensure that each exception
vector entry is the appropriate offset from the vector base address.
This is slightly fragile, as were an entry to become too large (greater
than 32 A64 instructions), all following entries would be silently
shifted until they meet the next alignment boundary. Thus we might
execute the wrong code in response to an exception.
To prevent this, introduce a new macro, VECTOR_ENTRY, that uses .org
directives to position each entry at the precise required offset from
the base of a vector. A vector entry which is too large will trigger a
build failure rather than a runtime failure which is difficult to debug.
For consistency, the base and end of each vector is similarly annotated,
with VECTOR_BASE and VECTOR_END, which provide the necessary alignment
and symbol exports. The now redundant directives and labels are removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18904 6f19259b-4bc3-4df7-8a09-765794883524
As EDK2 runs in an idmap, we do not use TTBR1_EL1, nor do we configure
it. TTBR1_EL1 may contain UNKNOWN values if it is not programmed since
reset.
Prior to enabling the MMU, we do not set TCR_EL1.EPD1, and hence the CPU
may make page table walks via TTBR1_EL1 at any time, potentially using
UNKNOWN values. This can result in a number of potential problems (e.g.
the CPU may load from MMIO registers as part of a page table walk).
Additionally, in the presence of Cortex-A57 erratum #822227, we must
program TCR_EL1.TG1 == 0b1x (e.g. 4KB granule) regardless of the value
of TCR_EL1.EPD1, to ensure that EDK2 can make forward progress under a
hypervisor which makes use of PAR_EL1.
This patch ensures that we program TCR_EL1.EPD1 and TCR_EL1.TG1 as above
to avoid these issues. TCR_EL1.TG1 is set to 4K for all targets, as any
CPU capable of running EDK2 must support this granule, and given
TCR_EL1.EPD1, programming the field is not detrimental in the absence of
the erratum.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18903 6f19259b-4bc3-4df7-8a09-765794883524
The ARM_MEMORY_REGION_DESCRIPTOR array provided by the platform may
contain entries that extend beyond the 4 GB boundary, above which
we can't map anything on 32-bit ARM. If this is the case, map only
the 1:1 addressable part.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18900 6f19259b-4bc3-4df7-8a09-765794883524
Bits 0 and 6 of the TTBRx system registers have different meanings
depending on whether a system implements the Multiprocessing
Extensions. So use separate memory attribute definitions for MP and
non-MP.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18899 6f19259b-4bc3-4df7-8a09-765794883524
Even though mapping normal memory (inner) shareable is usually the
correct choice on coherent systems, it may be desirable in some cases
to use non-shareable mappings for normal memory, e.g., when hardware
managed coherency is not required and the memory system is not fully
configured yet. So introduce a PCD PcdNormalMemoryNonshareableOverride
that makes cacheable mappings of normal memory non-shareable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18897 6f19259b-4bc3-4df7-8a09-765794883524
To align with the way normal cacheable memory is mapped, set the
shareable bit for cached accesses performed by the page table walker.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18896 6f19259b-4bc3-4df7-8a09-765794883524
Some MMU manipulation is dependent on the presence of the multiprocessing
extensions. So add a function that returns this information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18895 6f19259b-4bc3-4df7-8a09-765794883524
Implement an accessor function for the ID_MMFR0 system register, which
contains information about the VMSA implementation. We will need this
to access the number of shareability levels and the nature of their
implementations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18894 6f19259b-4bc3-4df7-8a09-765794883524
The definition TTBR_WRITE_THROUGH_NO_ALLOC makes little sense, since
a) its meaning is unclear in the context of TTBRx, since write through
always implies Read-Allocate and no Write-Allocate
b) its definition equals the definition of TTBR_WRITE_BACK_ALLOC
So instead, rename it to TTBR_WRITE_THROUGH and update the definition
to reflect the name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18893 6f19259b-4bc3-4df7-8a09-765794883524
To prevent speculative intruction fetches from MMIO ranges that may
have side effects on reads, the architecture requires device mappings
to be created with the XN or UXN/PXN bits set (for the ARM/EL2 and
EL1&0 translation regimes, respectively.)
Note that, in the ARM case, this involves moving all accesses to a
client domain since permission attributes like XN are ignored from
a manager domain. The use of a client domain is actually mandated
explicitly by the UEFI spec.
Reported-by: Heyi Guo <heyi.guo@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18891 6f19259b-4bc3-4df7-8a09-765794883524
The function GcdAttributeToArmAttribute() is not used anywhere in the
code base, and is only defined for AARCH64 and not for ARM. It also
fails to set the bits for shareability and non-executability that we
require for correct operation. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18888 6f19259b-4bc3-4df7-8a09-765794883524
We force alignment to 2K after generating the DebugAgentVectorTable
symbol, and hence DebugAgentVectorTable itself may not be 2K-aligned,
and table entries may not be at the correct offset from the
DebugAgentVectorTable base address.
Fix this by forcing alignment before generating the
DebugAgentVectorTable symbol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18865 6f19259b-4bc3-4df7-8a09-765794883524
Mark all cached memory mappings as shareable (or inner shareable on
AArch64) so that our view of memory is kept coherent by the hardware.
This is relevant for things like coherent DMA and virtualization (where
a guest may migrate to another core) but in general, since UEFI on ARM
is mostly used in a context where the secure firmware and possibly a
secure OS are already up and running, it is best to refrain from using
any non-shareable mappings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18778 6f19259b-4bc3-4df7-8a09-765794883524
When allocating memory to perform non-coherent DMA, use the cache
writeback granule rather than the data cache linesize for alignment.
This prevents the explicit cache maintenance from corrupting
unrelated adjacent data if the cache writeback granule exceeds
the cache linesize.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18759 6f19259b-4bc3-4df7-8a09-765794883524
Add a function to ArmLib that provides access to the Cache Writeback
Granule (CWG) field in CTR_EL0. This information is required when
performing non-coherent DMA.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18758 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture provides no reliable way to clean or invalidate
the entire data cache at runtime. The reason is that such maintenance
requires the use of set/way maintenance operations, which are suitable
only for the kind of maintenance that is carried out when the cache is
taken offline entirely.
So ASSERT () when any of the CacheMaintenanceLib whole data cache routines
are invoked rather than pretending we can do anything meaningful here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18756 6f19259b-4bc3-4df7-8a09-765794883524
There is no need to issue a full data synchronization barrier and an
instruction synchronization barrier after each and every set/way or
MVA cache maintenance operation. For the set/way case, we can simply
remove them, since the set/way outer loop already issues the required
barriers after completing its traversal over all the cache levels.
For the MVA case, move the data synchronization barrier out of the
loop, and add the instruction synchronization barrier to the I-cache
invalidation by MVA routine.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18755 6f19259b-4bc3-4df7-8a09-765794883524
The stride used by the cache maintenance by MVA instructions should
be retrieved from CTR_EL0.DminLine and CTR_EL0.IminLine, whose values
reflect the actual geometry of the caches. Using CCSIDR for this purpose
violates the architecture.
Also, move the line length accessors to common code, since there is no
need to keep them separate between ARMv7 and AArch64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18754 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture does not allow the actual geometries of the caches
to be inferred from the CCSIDR cache info system register, since the
geometry it reports is intended for performing cache maintenance by
set/way and nothing else. Since the ArmLib cache info routines are
based solely on CCSIDR contents, they should not be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18753 6f19259b-4bc3-4df7-8a09-765794883524
The function ArmCleanDataCacheToPoU() has no users, and its purpose
is unclear, since it uses cache maintenance by set/way to perform
the clean to PoU, which is a dubious practice to begin with. So
remove the declaration and all definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18752 6f19259b-4bc3-4df7-8a09-765794883524
The ARM9 ArmLib implementation is not referenced anywhere in the
tree, and unlikely to be useful going forward, considering that
ARM9 outdates even ARMv6. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18750 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture requires a DSB to complete TLB maintenance, with a
subsequent ISB being required to synchronize subsequent items in the
current instruction stream against the completed TLB maintenance.
The ArmEnableMmu function is currently missing the DSB, and hence the
TLB maintenance is not guaranteed to have completed at the point the MMU
is enabled. This may result in unpredictable behaviour.
The DSB subsequent to the write to SCTLR_EL1 is unnecessary; the ISB
alone is sufficient to complete all prior instructions and to
synchronise the new context with any subsequent instructions.
This patch adds missing DSBs to complete TLB maintenance, and removes
the unnecessary trailing DSB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18749 6f19259b-4bc3-4df7-8a09-765794883524
When performing a tftp download from a server which does not support
rfc2349 transfer size option (such as netkit-tftpd), the existing code
falls back to allocating an 8MB buffer. Since this is insufficient for
an uncompressed AArch64 Linux kernel image, double the size to 16MB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ashutosh Singh <ashutosh.singh@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18748 6f19259b-4bc3-4df7-8a09-765794883524
Use the refactored UpdateRegionMapping () to traverse the translation
tables, splitting block entries along the way if required, and apply
a mask + or on each to set or clear the PXN/UXN/XN or RO bits.
For now, the 32-bit ARM versions remain unimplemented.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18587 6f19259b-4bc3-4df7-8a09-765794883524
Move the page table traversal and splitting logic to a separate function
UpdateRegionMapping() and refactor it slightly so we can reuse it later to
implement non-executable regions, for the stack. This primarly involves
adding a value/mask pair to the function prototype that allows us to flip
arbitrary bits on each block entry as the page tables are traversed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18586 6f19259b-4bc3-4df7-8a09-765794883524
The non-privileged execute never (UXN) page table bit defined for the
EL1&0 translation regime and the execute never (XN) bit defined for the
EL2 and EL3 translation regimes happen to share the same bit position,
but they are in fact defined distinctly by the architecture. So define
both bits explicitly, and add comments in places where we take advantage
of the fact that they share the same bit position.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18585 6f19259b-4bc3-4df7-8a09-765794883524
All our page tables are allocated from memory whose cacheability
attributes are inherited by the cacheability bits in the MMU control
register, so there is no need for explicit cache maintenance after
updating the page tables. And even if there were, Set/Way operations
are not appropriate anyway for ensuring that these changes make it to
main memory. So just remove the explicit cache maintenance completely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18570 6f19259b-4bc3-4df7-8a09-765794883524
Now that the AArch64 MMU code correctly identifies and handles
naturally aligned regions of more than 2 MB in size, it will happily
try to use block mappings at level 0 to map huge memory regions, such
as the single cacheable 1:1 mapping we use for Xen domU to map the
entire PA space. However, block mappings are not supported at level 0
so the resulting translation tables will be incorrect, causing
execution to fail as soon as the MMU is enabled.
So use level 1 as the minimum level at which to perform block
translations.
Reported-by: Julien Grall <julien.grall@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18568 6f19259b-4bc3-4df7-8a09-765794883524
During page entry attribute update, if there are table entries
between starting BlockEntry and LastBlockEntry, table entries will be
set as block entries and the allocated memory of the tables will be
leaked.
So instead, we break the inner loop when we find a table entry and run
outer loop again to step into the table by the same logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
[ardb: move termination condition check inside the loop]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18425 6f19259b-4bc3-4df7-8a09-765794883524
Below code has bug since *BlockEntrySize and *TableLevel are not
updated accordingly:
if (IndexLevel == PageLevel) {
// And get the appropriate BlockEntry at the next level
BlockEntry = (UINT64*)TT_GET_ENTRY_FOR_ADDRESS (TranslationTable, \
IndexLevel + 1, RegionStart);
// Set the last block for this new table
*LastBlockEntry = TT_LAST_BLOCK_ADDRESS(TranslationTable, \
TT_ENTRY_COUNT);
}
Also it doesn't check recursively to get the last level, e.g. the
initial PageLevel is 1 and we already have level 2 and 3 tables at
this address.
What's more, *LastBlockEntry was not updated when we get a table and
IndexLevel != PageLevel.
So we reorganize the sequence, only updating TranslationTable,
PageLevel and BlockEntry in the loop, and setting the other output
parameters with the final PageLevel before returning.
And LastBlockEntry is only an OUT parameter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18424 6f19259b-4bc3-4df7-8a09-765794883524
There is a hidden bug for below code:
(1 << BaseAddressAlignment) & *BlockEntrySize
From disassembly code, we can see the literal number 1 will be treated
as INT32 by compiler by default, and we'll get 0xFFFFFFFF80000000 when
BaseAddressAlignment is equal to 31. So we will always get 31 when
alignment is larger than 31.
if ((1 << BaseAddressAlignment) & *BlockEntrySize) {
5224: f9404be0 ldr x0, [sp,#144]
5228: 2a0003e1 mov w1, w0
522c: 52800020 mov w0, #0x1 // #1
5230: 1ac12000 lsl w0, w0, w1
5234: 93407c01 sxtw x1, w0
The bug can be replayed on QEMU AARCH64; by adding some debug print,
we can see lots of level 1 tables created (for block of 1GB) even
when the region is large enough to use 512GB block size.
Use LowBitSet64() in BaseLib instead to fix the bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18423 6f19259b-4bc3-4df7-8a09-765794883524
The bug can be triggered when alignment of Base is larger than Length
by 2 level of page granularity, e.g.
Base is 0x4000_0000, Length is 0x1000
The original code will change 2MB page level and we will get a
negative remaining length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18422 6f19259b-4bc3-4df7-8a09-765794883524
The code has a simple bug on calculating aligned page table address.
We can just use AllocateAlignedPages in MemoryAllocationLib instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18421 6f19259b-4bc3-4df7-8a09-765794883524
NewNode is the node we found, while Node is the last node in the
list. Also update mFreedBufferSize.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18390 6f19259b-4bc3-4df7-8a09-765794883524
No platforms use the ARMv6 (ARM11) support code anymore. In fact, the
only reference to it in ArmPkg.dsc was commented out by Andrew in SVN
r11298 (2011-02-03) so it may well be broken. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18237 6f19259b-4bc3-4df7-8a09-765794883524
Instead of inferring the GIC revision from the CPU id registers
and the presence/availability of the system register interface
upon each invocation, move the logic to a constructor and cache
the result.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18100 6f19259b-4bc3-4df7-8a09-765794883524
Clone ArmGicArchLib into a SEC phase specific ArmGicArchSecLib
so that we can modify the former in a subsequent patch to cache
the GIC revision in a global variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18099 6f19259b-4bc3-4df7-8a09-765794883524
The current implementation of ArmGicGetSupportedArchRevision ()
that is used by all ARM platforms is entirely stateless (in order
to support being executed from flash) so it needs to interrogate
the hardware for the supported GIC revision upon each invocation.
However, this statelessness is only needed for SEC type modules;
in all other cases, we could easily determine the GIC revision once,
and store the result in a global variable.
In preparation of having separate early and normal versions, this patch
introduces the ArmGicArchLib library class and default implementation,
and moves the existing ArmGicGetSupportedArchRevision () into it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18098 6f19259b-4bc3-4df7-8a09-765794883524
This change removes the embedded Linux Loder from BdsLib.
BdsLib becomes OS agnostic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17969 6f19259b-4bc3-4df7-8a09-765794883524
Replaced the function BdsLoadApplication() by two explicit
functions that load the EFI application either by its GUID
or its Name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17966 6f19259b-4bc3-4df7-8a09-765794883524
The TFTP Device Path might contain a list of File Path device
path nodes.
ConvertDevicePathToText() allows to concatenate these File Path
nodes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17539 6f19259b-4bc3-4df7-8a09-765794883524
We need to use msr instruction to write system register. It seems the
code was simply copied from ArmReadCntkCtl.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17440 6f19259b-4bc3-4df7-8a09-765794883524
Since there is now a formal definition of EFI_LOAD_OPTION, we can no
longer typedef it as a UINT8*. So update the code to use the common
definition, which is not a pointer type, hence the additional changes
to the C code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17410 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_FIRMWARE_VOLUME2_PROTOCOL::EFI_FV_READ_SECTION prototype
takes a pointer to a pointer to an output buffer, so we should
not dereference Image (which is a pointer to pointer type itself)
but pass its value directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17357 6f19259b-4bc3-4df7-8a09-765794883524
Other libraries/modules could use it (eg: EFI Shell command `runaxf`).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17297 6f19259b-4bc3-4df7-8a09-765794883524
This removes the range size threshold for virtual address based cache
maintenance instructions that operate on VA ranges to be 'promoted' to
use set/way instructions.
Doing so is unsafe: set/way operations are fundamentally different
from VA operations, and really only suitable for cleaning or invalidating
a cache when turning it on or off.
To quote the ARM ARM (DDI0487A_d G3.4):
"""
Since the set/way instructions are performed only locally, there is no
guarantee of the atomicity of cache maintenance between different PEs,
even if those different PEs are each performing the same cache maintenance
instructions at the same time. Since any cacheable line can be allocated
into the cache at any time, it is possible for [a] cache line to migrate
from an entry in the cache of one PE to the cache of a different PE in a
manner that the cache line avoids being affected by set/way based cache
maintenance. Therefore, ARM strongly discourages the use of set/way
instructions to manage coherency in coherent systems.
"""
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17176 6f19259b-4bc3-4df7-8a09-765794883524
InternalMemScanMem(8|16|32|64) was returning a pointer that was
post incremented from the expected returned value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <ronald.cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17108 6f19259b-4bc3-4df7-8a09-765794883524
PeCoffLoaderRelocateImageExtraAction() prints helpful debugger commands
for source level debugging. These messages should not be printed on the
EFI_D_ERROR level; they don't report errors. Change the debug level
(bitmask, actually) to EFI_D_LOAD | EFI_D_INFO, because the messages are
printed in relation to image loading, and they are informative.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16983 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
Some boot entries might not have a EFI Device Path FilePath
attached to it (eg: EFI device Path for removable device path).
This patch allows a support loader to edit the EFI Device Path
and for instance add \EFI\BOOT\BOOT(ARM|AA64).EFI
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16930 6f19259b-4bc3-4df7-8a09-765794883524
Allow a platform to set PcdArmArchTimerFreqInHz to zero, and consider it a
request to use the actual timer frequency.
No global variable is introduced, so that the library can be used in PEIMs
that execute from flash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16691 6f19259b-4bc3-4df7-8a09-765794883524
When loading an image from a file, close the file after reading from it.
Use OpenProtocol instead of HandleProtocol to retrieve the simple file
system protocol interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16586 6f19259b-4bc3-4df7-8a09-765794883524
Fix DHCP4 configuration as part of TFTP boot process to get the IP address of
the gateway and the subnet mask from the DHCP server.
Fix a memory leak when the download from the TFTP server fails as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16582 6f19259b-4bc3-4df7-8a09-765794883524
The memory reserved to load the device tree is over-allocated when
UEFI loads the blob to update the device tree with additional
information such as the command line, the initrd, etc.
This change ensures the total size declared by the device tree matches
the actual data (and not the over-allocated size value).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16517 6f19259b-4bc3-4df7-8a09-765794883524
Rework the downloading of an image from a TFTP server to do not
depend on any "PXE specific" setting of the DHCP server.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16516 6f19259b-4bc3-4df7-8a09-765794883524
Both MicroSeconds and PcdArmArchTimerFreqInHz are 32-bit values on
AArch32 so their multiplication produces 32-bit result that might
cause wrong calculation.
Example: With MicroSeconds = 200 us, PcdArmArchTimerFreqInHz = 24MHz.
200*24000000 = 0x1_1E1A_3000 => So 0x1E1A_3000 when the type is UINT32.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16329 6f19259b-4bc3-4df7-8a09-765794883524
- Fixed memmove when going backward: the copy started one byte
after the end of the region to copy
- memset: - removed unused register
- fixed arguments size and character arguments were
actually reversed
- Added memmove() to ARM32 GCC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16328 6f19259b-4bc3-4df7-8a09-765794883524
From the AArch64 Procedure Call Standard (ARM IHI 0055B):
5.2.2.1 Universal stack constraints
At all times the following basic constraints must hold:
- SP mod 16 = 0. The stack must be quad-word aligned.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16327 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16325 6f19259b-4bc3-4df7-8a09-765794883524
ArmInvalidateInstructionAndDataTlb() was doing the same thing as
ArmInvalidateTlb().
Both invalidate Data and Instruction TLBs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16253 6f19259b-4bc3-4df7-8a09-765794883524
Add library functions to rename a file and get a temporary name
for a file through the semi-hosting interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16238 6f19259b-4bc3-4df7-8a09-765794883524
Change mnemonic SEMIHOST_FILE_MODE_CREATE with mnemonic SEMIHOST_FILE_MODE_UPDATE.
The bit referred to by this mnemonic is for the semi-hosting open mode code the
equivalent of the + in the ISO C fopen mode terminology. This allows to select the
so called update mode for which both read and write are allowed on the open file.
The mnemonic SEMIHOST_FILE_MODE_UPDATE is more in line with the ISO C fopen mode
terminology. A description of the ISO C fopen modes can be found here :
http://pubs.opengroup.org/onlinepubs/009695399/functions/fopen.html.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16237 6f19259b-4bc3-4df7-8a09-765794883524
Prior to this change, when a new page table was created at level N+1,
the reference to the table was added to the level N translation table,
before being initialized.
It means if virtual addresses were in the address range defined by
this new table the CPU would crash as the address range was not
initialized.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16206 6f19259b-4bc3-4df7-8a09-765794883524
Keeping track of uncached memory allocations prevents doing expensive
cache operations (eg: clean & invalidate) on newly allocated regions
by reusing regions where possible
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16205 6f19259b-4bc3-4df7-8a09-765794883524
Only ArmVirtualizationPkg based platforms are expected to use
the dynamic method to choose between SMC and HVC to invoke PSCI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16204 6f19259b-4bc3-4df7-8a09-765794883524
As this library is used in the implementation of a Runtime Service,
make sure to access dynamic PCDs only in the constructor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16108 6f19259b-4bc3-4df7-8a09-765794883524
This implementation of EfiResetSystemLib uses ARM PSCI calls to perform
reboot and poweroff, using either HVC or SMC calls.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16089 6f19259b-4bc3-4df7-8a09-765794883524
This is a utility library closely modeled after ArmSmcLib, that allows
hypervisor call (HVC) instructions to be issued from C code.
Change-Id: I5f5c65f83e910ff98dbb2f5b031dad8c4f663daa
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16088 6f19259b-4bc3-4df7-8a09-765794883524
This fixes a bug in the stack handling in the RVCT .asm version
of the SMC wrapper.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16086 6f19259b-4bc3-4df7-8a09-765794883524
This changes the definition and a bunch of references to
gArmTokenSpaceGuid.PcdSystemMemoryBase and
gArmTokenSpaceGuid.PcdSystemMemorySize so they can be declared as dynamic PCDs
by the platform. Also, move the non-SEC call to
ArmPlatformInitializeSystemMemory() earlier, so a platform has a chance to set
these PCDs before they are first referenced.
The purpose is allowing dynamically instantiated virtual machines to declare
the system memory by passing a device tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16079 6f19259b-4bc3-4df7-8a09-765794883524
Move TimerDxe and ArmArchTimerLib to ArmGenericTimerCounterLib, and update all
platforms to select the physical counter instance they have been using
implicitly all along.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16078 6f19259b-4bc3-4df7-8a09-765794883524
The ArmArchTimerLib.h include file is not directly related to the TimerLib
instance ArmArchTimerLib, so the name is confusing. Rename to ArmArchTimer.h
instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16073 6f19259b-4bc3-4df7-8a09-765794883524
Allow the PCDs gArmTokenSpaceGuid.PcdGicDistributorBase and
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase to be redeclared
as PcdsDynamic by the platform, so virtual machines can set these
properties during boot. As the PcdGet32() calls now call into the
PCD database, cache the values that are required during the handling
of interrupts.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16072 6f19259b-4bc3-4df7-8a09-765794883524
- Fix ARM Thumb mask operator. This was flagged by a toolchain as warning
"use of logical '&&' with constant operand [-Wconstant-logical-operand]"
- AArch64 should not be building the ARM32 disassemblers.
- Add a AArch64 build target. The disassembler is still to be
implemented.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16069 6f19259b-4bc3-4df7-8a09-765794883524
Check Linux image and parameters are not overlapping with each other.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16013 6f19259b-4bc3-4df7-8a09-765794883524
It is actually the same sequence as AArch64.
Without cleaning the data cache prior to disable the cache, the LR value
pushed on the stack when entering in ArmCleanInvalidateDataCache()
might have been overwritten by this specific cache line maintenance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16012 6f19259b-4bc3-4df7-8a09-765794883524
Prior to this change the frequency was rounded to 1Mhz.
This change rounds the timer frequency to 1KHz.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15921 6f19259b-4bc3-4df7-8a09-765794883524
Replace tabs by spaces for indentation to comply to EDK2 coding standards.
Done in files with extension ".S", ".c", ".h", ".asm", ".dsc", ".inc", "*.inf",
"*.dec" or ".fdf" and located in ArmPkg, ArmPlatformPkg, EmbeddedPkg,
BeagleBoardPkg or Omap35xxPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15901 6f19259b-4bc3-4df7-8a09-765794883524
The function was not returning the expected value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15850 6f19259b-4bc3-4df7-8a09-765794883524
Some device paths were making BdsConnectDevicePath() hang.
To prevent these hangs we check if the handle returned by
gBS->LocateDevicePath() is the same after each iteration.
An example of a device path that hangs:
PciRoot(0x0)/Pci(0x1,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(...)
The connect controller function manages to find PciRoot()/Pci(0x1,0x0)
but the USB driver does not produce USB(0x0,0x0)/USB(0x3,0x0) and
returns EFI_SUCCESS on its initialization.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15835 6f19259b-4bc3-4df7-8a09-765794883524
The SMC helper functions were buggy as they were assuming that
the values in x1-x7 registers were preserved across an SMC call,
which is not the case. This patch fixes this issue.
It also simplifies the code by providing only 1 version of the SMC
helper function. We used to have 4 versions depending on the number
of arguments. The problem with this approach was that the number of
arguments also dictated the number of return values, which is
completely unrelated. E.g. you can have an SMC call that takes
1 argument but returns 4 values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15748 6f19259b-4bc3-4df7-8a09-765794883524
ArmPkg contains unused and outdated code for runtime PE/COFF image
relocation.
- Use the version in MdePkg instead.
- Remove references to this package from BeagleBoardPkg.
ArmPkg/BasePeCoffLib was added to deal with MOVT instruction that
was not part of the PE/COFF specification at that time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15712 6f19259b-4bc3-4df7-8a09-765794883524
The AArch64 Vector Table must be aligned on a 2K boundary.
The FDF specification does not support 2K alignment but support 4K.
A clear comment has been added to help integrator to understand why the
assertion fails when porting to a new AArch64 platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15659 6f19259b-4bc3-4df7-8a09-765794883524
Some platforms might decide to not support PSCI in their FDT-aware Linux
system even if their firmware supports it.
It is the responsibility of the platform engineer to provide the appropriate FDT.
The PCD gArmTokenSpaceGuid.PcdArmPsciSupport is not required anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15658 6f19259b-4bc3-4df7-8a09-765794883524
Data & Instruction Caches can be kept enabled while the new
translation table is filled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15647 6f19259b-4bc3-4df7-8a09-765794883524
In some case, the size of the downloaded TFTP image cannot be known.
An arbitrary larger buffer is allocated to receive the image.
We need to make sure when we free the buffer we free the size
of the allocated buffer and not the size of the actual image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15609 6f19259b-4bc3-4df7-8a09-765794883524
Cache maintenance operations by Set/Way require that the Write Buffer
be drained before the cache is flushed. Without that, the flush can
miss the most recent values written as they are still "pipelined".
That has unfortunate consequences, especially where code is being
copied to RAM.
The fix is to add DSB instructions before the affected operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15551 6f19259b-4bc3-4df7-8a09-765794883524
Some TFTP servers do not have 'tsize' extension.
This change allows to download files from TFTP servers that do not have
this extension by trying to download the file into a pre-allocated buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15539 6f19259b-4bc3-4df7-8a09-765794883524
Boot entries created by efibootmgr may contain a partial device path
to the EFI application to boot. These entries begin with a partition
device path whereas entries created via ARM Boot Manager contain a
full path to the EFI application. The ARM BDS code will fill in the
missing parts of this partial device path as it does for removeable
device paths. This allows the application to be loaded and started.
However, the current code passes the original partial device path to
gBS->LoadImage() and thus LoadImage is unable to find a DeviceHandle
for the path. This means the application being booted cannot find the
boot device from the Loaded Image Protocol structure. In the case of
grub, this prevents the grub config file from being found. This patch
fixes this by making sure the full path is propagated back to the
caller of gBS->LoadImage() so that a proper DeviceHandle gets passed
to the application being booted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15518 6f19259b-4bc3-4df7-8a09-765794883524
AARCH64 does not have a BIC-with-immediate instruction. GAS assembles it as a
AND with the immediate inverted, but Clang's integrated assembler emits an
error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15509 6f19259b-4bc3-4df7-8a09-765794883524
This ensures the .type directive is used to mark them as function symbols
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15506 6f19259b-4bc3-4df7-8a09-765794883524
Some non-GCC toolchain might support the GNU assembly language.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15504 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Peicong Li
Supreeth Venkatesh
Sami Mujawar
Jun Nie
Leif Lindholm
Marvin Häuser
Jiewen Yao
Daniil Egranov
Laszlo Ersek
Gary Lin
Heyi Guo
Evan Lloyd
Leendert van Doorn
Cohen, Eugene
Mark Rutland
Ashutosh Singh
Olivier Martin
Ronald Cron
Harry Liebel
Brendan Jackman
Mark Salter