a. Add check validation of RemainingDevicePath in Supported()
b. In Star() function, if RemaingDevicePath is the End of Device Path Node, don't create child device and return EFI_SUCCESS.
2. fixed one device path issue in ScsiBus driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9264 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
1. remove unused macro/remove unnecessary included header file
2. for those values defined by PCI spec, use the naming of definition in IndustryStandard/Pci.h
3. use BITX macro in Base.h rather than define one by self.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8992 6f19259b-4bc3-4df7-8a09-765794883524
Root cause is that Read Capacity command returns media not present error, then UsbMassStorage driver issues Sense Request command to get the sense data. However, the USB floppy drive still returns the previous error for the Sense Request command. UsbBootRequestSense() does not handle this case correctly and returns EFI_SUCCESS so that the block size of the Block IO protocol instance is set to be 0.
Solution is to fix the logic to handle the case and add protective logic to avoid setting block size to be 0.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8979 6f19259b-4bc3-4df7-8a09-765794883524
///
/// Standard INQUIRY data format
///
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 DeviceType_Modifier : 7;
UINT8 Rmb : 1;
UINT8 Version;
UINT8 Response_Data_Format;
UINT8 Addnl_Length;
UINT8 Reserved_5_95[95 - 5 + 1];
} EFI_SCSI_INQUIRY_DATA;
is longer than 36 bytes and EFI_BAD_BUFFER_SIZE may be returned if the actual inquiry data is less than that of EFI_SCSI_INQUIRY_DATA.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8329 6f19259b-4bc3-4df7-8a09-765794883524
The "HiiLib" prefix for all HII Library API function names changed to "Hii".
Remove:
HiiLibPreparePackageList(), replaced by HiiAddPackages()
HiiLibNewString(), replaced by HiiSetString()
HiiLibGetStringFromHandle(), replaced by HiiGetString()
HiiLibGetStringFromToken(), replaced by HiiGetPackageString()
HiiLibExtractGuidFromHiiHandle()
HiiLibDevicePathToHiiHandle()
HiiLibGetSupportedSecondaryLanguages()
HiiLibGetSupportedLanguageNumber()
HiiLibExportPackageLists()
HiiLibListPackageLists()
Interface change:
HiiAddPackages()
HiiSetString()
HiiGetString()
HiiGetHiiHandles()
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8083 6f19259b-4bc3-4df7-8a09-765794883524
Our UEFI Driver supports both SCSI Passthru (SPT) and Ext SCSI Passthru (That is our driver installs both SCSI Passthru and Ext SCSI Passthru). When we unload our driver SCSI Bus driver closes only ESPT and keeps SPT open. Due to this when I load my driver second time the SPT installation will fail and now attempting to unload will either crash the system or hang the system.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7906 6f19259b-4bc3-4df7-8a09-765794883524
vanjeff
eric_tian
rsun3
gikidy
mdkinney
jljusten
qhuang8
jji4
xli24
qwang12