1. Add delay after set device address and get configuration descriptor.
2. Sync the change at R15876 in XhciDxe to do not access transfer ring when endpoint is isochronous type or control type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16105 6f19259b-4bc3-4df7-8a09-765794883524
In XCODE tool chain, the 64-bit bit wise and operation is causing the compiler to emit an __umoddi3.
This patch uses BaseLib API to replace 64-bit bit operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16065 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
5. Add PACKAGE_UNI_FILE UNI file that contains the localized Abstract and Description of a package and localized strings associated with PCDs.
a. Addresses an information gap between DEC files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume PACKAGE_UNI_FILE and associated UNI file during UDP creation that performs the DEC -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce PACKAGE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> DEC conversion.
6. Add Package Extra UNI file that provides the localized Name of a package.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a package to specify extra files to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a package to go along with the localized Abstract and Description from the PACKAGE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15965 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15964 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
The code FvCheck() will check FFS file checksum to verify if FFS file is valid when the file is
with FFS_ATTRIB_CHECKSUM set. The whole file will be read through when doing checksum check.
So we can cache FFS file to memory buffer for following checksum calculating first.
And then, the cached file buffer can be also used for FvReadFile.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15958 6f19259b-4bc3-4df7-8a09-765794883524
Previous DxeCore FwVol code will cache whole FvMain FV from flash that may be
uncached if platform reports FvMain FVB, it will impact DXE performance.
The code already has file level cache, so don’t need to cache memory mapped IO FV.
It can also reduce memory consumption of caching memory mapped IO FVs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15916 6f19259b-4bc3-4df7-8a09-765794883524
2. CapsuleLongModeBuffer variable should be set to Read-Only. It should not be changed by someone else.
3. Introduce a new PCD PcdIdentifyMappingPageTablePtr to share the same range of page table between AcpiS3 and Capsule.
4. Capsule stack size is allocated from PcdCapsulePeiLongModeStackSize.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15909 6f19259b-4bc3-4df7-8a09-765794883524
We strongly prefer that contribtions be offered using the same license
as the project/module. But, we should document other acceptable
licenses for contributions.
This will allow package owners to more easily know if they can accept
a contribution under a different source license.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Mark Doran <mark.doran@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add support for RSA 2048 SHA 256 signing and verification encoded in a PI FFS GUIDED Encapsulation Section. The primary use case of this feature is in support of signing and verification of encapsulated FVs for Recovery and Capsule Update, but can potentially be used for signing and verification of any content that can be stored in a PI conformant FFS file. Signing operations are performed from python scripts that wrap OpenSsl command line utilities. Verification operations are performed using the OpenSsl libraries in the CryptoPkg.
The guided encapsulation sections uses the UEFI 2.4 Specification defined GUID called EFI_CERT_TYPE_RSA2048_SHA256_GUID. The data layout for the encapsulation section starts with the UEFI 2.4 Specification defined structure called EFI_CERT_BLOCK_RSA_2048_SHA256 followed immediately by the data. The signing tool included in these patches performs encode/decode operations using this data layout. HashType is set to the UEFI 2.4 Specification defined GUID called EFI_HASH_ALGORITHM_SHA256_GUID.
MdePkg/Include/Guid/WinCertificate.h
=================================
//
// WIN_CERTIFICATE_UEFI_GUID.CertType
//
#define EFI_CERT_TYPE_RSA2048_SHA256_GUID \
{0xa7717414, 0xc616, 0x4977, {0x94, 0x20, 0x84, 0x47, 0x12, 0xa7, 0x35, 0xbf } }
///
/// WIN_CERTIFICATE_UEFI_GUID.CertData
///
typedef struct {
EFI_GUID HashType;
UINT8 PublicKey[256];
UINT8 Signature[256];
} EFI_CERT_BLOCK_RSA_2048_SHA256;
MdePkg/Include/Protocol/Hash.h
=================================
#define EFI_HASH_ALGORITHM_SHA256_GUID \
{ \
0x51aa59de, 0xfdf2, 0x4ea3, {0xbc, 0x63, 0x87, 0x5f, 0xb7, 0x84, 0x2e, 0xe9 } \
}
The verification operations require the use of public key(s). A new PCD called gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer is added to the SecurityPkg that supports one or more SHA 256 hashes of the public keys. A SHA 256 hash is performed to minimize the FLASH overhead of storing the public keys. When a verification operation is performed, a SHA 256 hash is performed on EFI_CERT_BLOCK_RSA_2048_SHA256.PublicKey and a check is made to see if that hash matches any of the hashes in the new PCD. It is recommended that this PCD always be configured in the DSC file as storage type of [PcdsDynamixExVpd], so the public keys are stored in a protected read-only region.
While working on this feature, I noticed that the CRC32 signing and verification feature was incomplete. It only supported CRC32 based verification in the DXE Phase, so the attached patches also provide support for CRC32 based verification in the PEI Phase.
I also noticed that the most common method for incorporating guided section extraction libraries was to directly link them to the DXE Core, which is not very flexible. The attached patches also add a generic section extraction PEIM and a generic section extraction DXE driver that can each be linked against one or more section extraction libraries. This provides a platform developer with the option of providing section extraction services with the DXE Core or providing section extraction services with these generic PEIM/DXE Drivers.
Patch Summary
==============
1) BaseTools - Rsa2049Sha256Sign python script that can perform test signing or custom signing of PI FFS file GUIDed sections
a. Wrapper for a set of OpenSsl command line utility operations
b. OpenSsl command line tool must be installed in location that is in standard OS path or in path specified by OS environment variable called OPENSSL_PATH
c. Provides standard EDK II command line arguments for a tool that encodes/decodes guided encapsulation section
Rsa2048Sha256Sign - Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.
usage: Rsa2048Sha256Sign -e|-d [options] <input_file>
positional arguments:
input_file specify the input filename
optional arguments:
-e encode file
-d decode file
-o filename, --output filename
specify the output filename
--private-key PRIVATEKEYFILE
specify the private key filename. If not specified, a
test signing key is used.
-v, --verbose increase output messages
-q, --quiet reduce output messages
--debug [0-9] set debug level
--version display the program version and exit
-h, --help display this help text
2) BaseTools - Rsa2049Sha256GenerateKeys python script that can generate new private/public key and PCD value that is SHA 256 hash of public key using OpenSsl command line utilities.
a. Wrapper for a set of OpenSsl command line utility operations
b. OpenSsl command line tool must be installed in location that is in standard path or in path specified by OS environment variable called OPENSSL_PATH
Rsa2048Sha256GenerateKeys - Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.
usage: Rsa2048Sha256GenerateKeys [options]
optional arguments:
-o [filename [filename ...]], --output [filename [filename ...]]
specify the output private key filename in PEM format
-i [filename [filename ...]], --input [filename [filename ...]]
specify the input private key filename in PEM format
--public-key-hash PUBLICKEYHASHFILE
specify the public key hash filename that is SHA 256
hash of 2048 bit RSA public key in binary format
--public-key-hash-c PUBLICKEYHASHCFILE
specify the public key hash filename that is SHA 256
hash of 2048 bit RSA public key in C structure format
-v, --verbose increase output messages
-q, --quiet reduce output messages
--debug [0-9] set debug level
--version display the program version and exit
-h, --help display this help text
3) BaseTools\Conf\tools_def.template
a. Define GUID/Tool to perform RSA 2048 SHA 256 test signing and instructions on how to use alternate private/public key
b. GUID is EFI_CERT_TYPE_RSA2048_SHA256_GUID
c. Tool is Rsa2049Sha256Sign
4) MdeModulePkg\Library\PeiCrc32GuidedSectionExtractionLib
a. Add peer for DxeCrc32GuidedSectionExtractionLib so both PEI and DXE phases can perform basic integrity checks of PEI and DXE components
5) MdeModulePkg\Universal\SectionExtractionPei
a. Generic PEIM that can link against one or more NULL section extraction library instances to provided one or more GUIDED Section Extraction PPIs
6) MdeModulePkg\Universal\SectionExtractionDxe
a. Generic DXE Driver that can link against one or more NULL section extraction library instances to provide one or more GUIDED Section Extraction Protocols.
7) SecurityPkg\Library\PeiRsa2048Sha256GuidedSectionExtractLib
a. NULL library instances that performs PEI phase RSA 2048 SHA 256 signature verification using OpenSsl libraries from CryptoPkg.
b. Based on algorithms from SecurityPkg Authenticated Variable services
c. Uses public key from gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer.
8) SecurityPkg\Library\DxeRsa2048Sha256GuidedSectionExtractLib
a. NULL library instances that performs DXE phase RSA 2048 SHA 256 signature verification using OpenSsl libraries from CryptoPkg.
b. Based on algorithms from SecurityPkg Authenticated Variable services
c. Uses public key from gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer.
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15799 6f19259b-4bc3-4df7-8a09-765794883524
It changes some of the PCD declarations to add more supported PCD storage types and
the change in the PCD access methods is associated with that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15798 6f19259b-4bc3-4df7-8a09-765794883524
This library has one depex of SerialPortPpi. Then, the PEIM linked it has this depex so that it is dispatched after SerialPortPpi is installed. SerialPortPpi notifies the platform initialization done, then serial port will work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15782 6f19259b-4bc3-4df7-8a09-765794883524
If GUIDED section has AUTH attribute only, DxeCore may wrongly set its AuthenticationStatus to 0 when its matched GUIDED extraction handler is not installed and Auth data is not verified. For this case, the return AuthenticationStatus should be EFI_AUTH_STATUS_NOT_TESTED.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15781 6f19259b-4bc3-4df7-8a09-765794883524
FALSE evaluates to 0. This was flagged by LLVM compiler as a
warning:
"expression which evaluates to zero treated as a null pointer
constant of type 'EFI_MTFTP4_OVERRIDE_DATA *'
[-Wnon-literal-null-conversion]"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye, Ting (ting.ye@intel.com)
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15741 6f19259b-4bc3-4df7-8a09-765794883524
Original code check if Attribute > 0x7FFFFFFF, this is wrong and fail to check valid case per UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15734 6f19259b-4bc3-4df7-8a09-765794883524
UEFI spec mentioned that the color mask can be set even when the device is in an invalid text mode. But the current code add text mode check. Removed the check now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15721 6f19259b-4bc3-4df7-8a09-765794883524
Check for 8th bit being reserved as per UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15680 6f19259b-4bc3-4df7-8a09-765794883524
Eric Dong
Feng Tian
Star Zeng
Fu, Siyuan
Nikolai Saoukh
Gao, Liming
Dong, Guo
Elvin Li
Samer El-Haj-Mahmoud elhaj
Jordan Justen
Qiu Shumin
Sergey Isakov
Michael Kinney
Harry Liebel
Jaben Carsey