1) Produce PI SMBIOS protocol in MdeModulePkg
2) Update all consumers (in CorePkgs and native platform pkgs) to consume SMBIOS protocol instead of DataHub
3) Pass ECC tool; Verify Nt32, Duet, Unix platform
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9456 6f19259b-4bc3-4df7-8a09-765794883524
1. Rename EFI_PEI_NEXT_VARIABLE_NAME2 to EFI_PEI_GET_NEXT_VARIABLE_NAME2, as PI 1.2 specifies.
2. Add return status description for PEI Service FfsGetVolumeInfo.
3. Update parameter description for EFI_PEI_READ_ONLY_VARIABLE2_PPI.NextVariableName().
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9438 6f19259b-4bc3-4df7-8a09-765794883524
1) Add one structure member – IpHdrLen in the EFI_NET_SESSION_DATA data structure.
2) Pass IP header length to upper-layer through this new member. The length of IP header will be used for ICMP6 packet generation in upper-layer.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9437 6f19259b-4bc3-4df7-8a09-765794883524
2. Update DevicePathDxe to support VLAN device path node
3. Update GenericBdsLib function DevicePathToStr() to support VLAN device path node
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9421 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix UI hang issue in SuppressIf Form support checkin
3. Update DriverSample to demo storage width of OrderedList could be defined to types other than UINT8. (Note: this requires BaseTools >= r9397 for updated VfrCompiler.exe)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9418 6f19259b-4bc3-4df7-8a09-765794883524
2. Integrate IPsec functionality to IP4 driver.
3. Move IP_VERSION_4/IP_VERSION_6 definition from IpIoLib to NetLib.
4. Move the Ip6/Udp6 protocol declaration from driver INF to Library INF (DxeIpIoLib and DxeUdpIoLib) for better readability.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9413 6f19259b-4bc3-4df7-8a09-765794883524
1, Implement EFI_PEI_FIRMWARE_VOLUME_PPI for FFS2 format as build-in supporting FV format in PeiCore.
2, Reduce the assumption of memory-mapped FV in PeiCore. PeiCore should access FV via EFI_PEI_FIRMWARE_VOLUME_PPI interface but not cast FvHandle/FileHandle to EFI_FIRMWARE_VOLUME_HEADER/EFI_FV_FILE_HEADER directly.
3, Reduce AllFv[] and AllFvCount in PEI_CORE_INSTANCE structure. Original PEI_CORE_INSTANCE use AllFv[] and Fv[] array to manage discovered FV and dispatched FV. But not need to make thing too complex. Now PEI_CORE_FV_HANDLE array of Fv[] will take responsibility to manage all FV instance and status.
4, Fix the bug use PeiDispatcher use wrong index for PeiFfsFindNextVolume(),
5, Fix the bug in PeiFfsFindNextVolume(), if instance is not found, *VolumeHandle should be set to NULL but not VolumeHandle was set to NULL.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9407 6f19259b-4bc3-4df7-8a09-765794883524
1. Update NetLib to a combined NetLib support dual network stack:
1) Add Network Debug facility for IPv4 stack.
2) Extend the library APIs to support IPv6 stack:
a. NetIp6IsUnspecifiedAddr
b. NetIp6IsLinkLocalAddr
c. NetIp6IsNetEqual
d. NetLibCreateIPv6DPathNode.
e. NetIp6PseudoHeadChecksum
f. NetIp6IsValidUnicast
3) Update the structure definitions:
a. Update NET_BUF to add EFI_IP6_HEADER and EFI_UDP_HEADER
b. Add NET_IP6_PSEUDO_HDR
4) Update Ip4IsUnicast to NetIp4IsUnicast
2. Update the impacted modules to adopt the combined NetLib.
3. Clean up coding style errors in all network drivers and libraries.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9391 6f19259b-4bc3-4df7-8a09-765794883524
2. Update Dhcp4 and Mtftp4 driver to adopt the combined UdpIo.
3. Clean up coding style problems in combined IpIoLib/NetLib. Update Tcp4 and Udp4 to adopt the changes.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9382 6f19259b-4bc3-4df7-8a09-765794883524
1. Add new interface Ip6IsValidUnicast
2. Add new enum IP6_EXTENSION_HEADER_TYPE
3. Add new structure IP6_ICMP_* definitions
4. Update structure from EFI_UDP4_HEADER to EFI_UDP_HEADER
5. Add new macro EFI_IP6_EQUAL
IpIoLib:
1. Update the IpIoLib to a combined library for both v4 and v6 network stack
2. Fix a bug in IpIoIcmpHandler() - for IPv6 packet, the header length is variable (basic header + extension) rathar than fixed length.
The fix removes the IPv6 header fields and notify the user with the ICMPv6 packet only containing payload.
TcpDxe/UdpDxe:
1. Update to adapt the new combined IpIoLib
2. Add gEfiIp6ProtocolGuid/gEfiIp6ServiceBindingProtocolGuid to [Protocols] in INF file since the Ip6.h is included in IpIoLib and NetLib.
3. Pass the TCP4/UDP4 UEFI SCT test on NT32 platform.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9374 6f19259b-4bc3-4df7-8a09-765794883524
With this update, SendForm() could support formset class GUID other than EFI_HII_PLATFORM_SETUP_FORMSET_GUID, for example, the EFI_HII_DRIVER_HEALTH_FORMSET_GUID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9369 6f19259b-4bc3-4df7-8a09-765794883524
Note: with this update, the limitation for "OrderedList should use array of data type UINT8 as its storage" is removed; now OrderedList could use any data type (UINT8/UINT16/UINT32/UINT64) as its storage array.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9360 6f19259b-4bc3-4df7-8a09-765794883524
The old behavior is: if press ESC, it will exit the whole Formset.
The new behavior is: if press ESC, it will return to the parent Form; if current Form is the root Form of a FormSet, it will exit the whole FormSet.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9359 6f19259b-4bc3-4df7-8a09-765794883524
2. Sync HSD #210249 patch: Fix bug in handling certain network errors in EfiDhcp4TransmitReceive() for DHCP4 driver
3. Enhance DhcpCleanLease to clear Netmask as well, so that Dhcp4->GetModeData() could return clean data in Dhcp4Stopped state.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9354 6f19259b-4bc3-4df7-8a09-765794883524
a. Update PciBusDxe module, and move it from IntelFrameworkModulePkg to MdeModulePkg
b. Move IncompatiblePciDeviceSupportDxe module from IntelFrameworkModulePkg to MdeModulePkg
c. Update the related consumes in inf/dsc/fdf
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9347 6f19259b-4bc3-4df7-8a09-765794883524
Increase the value of USB_GENERAL_DEVICE_REQUEST_TIMEOUT from
50 milliseconds to 100 milliseconds. This provides a work around
for slower USB hubs and devices.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9330 6f19259b-4bc3-4df7-8a09-765794883524
PcdFlashNvStorageFtwWorkingBase and PcdFlashNvStorageFtwSpareBase are
now updated each time an FVB instance is installed. This allows the
PCDs to be set at runtime at any time before the FVB is installed.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9312 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
a. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
b. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
2. roll back serial drivers not to create child device, if the device speicifed by remainingdevicepath cannot find in the created devices list.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9267 6f19259b-4bc3-4df7-8a09-765794883524
a. Add check validation of RemainingDevicePath in Supported()
b. In Star() function, if RemaingDevicePath is the End of Device Path Node, don't create child device and return EFI_SUCCESS.
2. fixed one device path issue in ScsiBus driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9264 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
Add PcdEmuVariableNvStoreReserved which allows a platform to declare a
memory address for the EMU Variable driver to use for the NV variable
store. The EMU Variable driver will look to see if the contents of
this memory range appear to be a valid variable store, and if so
the EMU driver will use the variables.
If a platform can preserve a memory range across system resets, this
feature can allow the EMU Variable driver's NV variable store to be
preserved across a system reset.
In the default case this PCD will be set as a fixed PCD with a value
of 0. In this case this new feature should have minimal impact on
the EMU Variable driver. (Perhaps a slight increase in code size,
but no functional difference is expected.)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9240 6f19259b-4bc3-4df7-8a09-765794883524
1. Boot to shell
2. go to boot maint manager
3. Boot options
4. Add boot option
5. Add 15 or so unique boot options (just so the list scrolls)
6. go the boot maint manager
7. go to Boot options
8. go to Change boot order
9. the list is long enough that it scrolls when you push down once (to get to the commit option)
10. push down once and then up once (repeat) (from list selected to "commit" selected)
11. you will notice the list and text is getting corrupt
12. do it until all items in list are gone (system will assert)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9197 6f19259b-4bc3-4df7-8a09-765794883524
1. Boot to shell
2. go to boot maint manager
3. Boot options
4. Add boot option
5. Add 15 or so unique boot options (just so the list scrolls)
6. go the boot maint manager
7. go to Boot options
8. go to Change boot order
9. the list is long enough that it scrolls when you push down once (to get to the commit option)
10. push down once and then up once (repeat) (from list selected to "commit" selected)
11. you will notice the list and text is getting corrupt
12. do it until all items in list are gone (system will assert)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9196 6f19259b-4bc3-4df7-8a09-765794883524
2. Update DxeIpl PEIM to not use S3Lib and RecoveryLib since the dependent PPIs have been moved from IntelFrameworkPkg to MdePkg. This will help to reduce the library instance selection in platform DSC files.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9046 6f19259b-4bc3-4df7-8a09-765794883524
2. Simplify the implementation of PeiLoadImage() in PeiCore to skip the function call of PeiLoadImageLoadImage() because PeiCore itself produce one instance of EFI_PEI_LOAD_FILE_PPI.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9045 6f19259b-4bc3-4df7-8a09-765794883524
1. remove unused macro/remove unnecessary included header file
2. for those values defined by PCI spec, use the naming of definition in IndustryStandard/Pci.h
3. use BITX macro in Base.h rather than define one by self.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8992 6f19259b-4bc3-4df7-8a09-765794883524
Root cause is that Read Capacity command returns media not present error, then UsbMassStorage driver issues Sense Request command to get the sense data. However, the USB floppy drive still returns the previous error for the Sense Request command. UsbBootRequestSense() does not handle this case correctly and returns EFI_SUCCESS so that the block size of the Block IO protocol instance is set to be 0.
Solution is to fix the logic to handle the case and add protective logic to avoid setting block size to be 0.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8979 6f19259b-4bc3-4df7-8a09-765794883524
xli24
xdu2
AJFISH
vanjeff
klu2
lgao4
rsun3
davidhuang
qouyang
tye
mdkinney
jchen20
jljusten
eric_tian
qhuang8
gikidy