Rename TPM_ENABLE to TPM2_ENABLE so naming is in line with the
ArmVirtPkg config option name.
Add separate TPM1_ENABLE option for TPM 1.2 support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Split Tcg2ConfigPei.inf into two variants: Tcg12ConfigPei.inf with
TPM 1.2 support included and Tcg2ConfigPei.inf supporting TPM 2.0 only.
This allows x86 builds to choose whenever TPM 1.2 support should be
included or not by picking the one or the other inf file.
Switch x86 builds to Tcg12ConfigPei.inf, so they continue to
have TPM 1.2 support.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Drop TPM_CONFIG_ENABLE config option. Including TPM support in the
build without also including the TPM configuration menu is not useful.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
With this in place the tpm configuration is not duplicated for each of
our four ovmf config variants (ia32, ia32x64, x64, amdsev) and it is
easier to keep them all in sync when updating the tpm configuration.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Prefer the e820 map provided via qemu firmware config interface
for memory detection. Use rtc cmos only as fallback, which should
be rarely needed these days as qemu supports etc/e820 since 2013.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add a bool parameter to ScanOrAdd64BitE820Ram to explicitly specify
whenever ScanOrAdd64BitE820Ram should add HOBs for high memory (above
4G) or scan only.
Also add a lowmem parameter so ScanOrAdd64BitE820Ram
can report the memory size below 4G.
This allows a more flexible usage of ScanOrAdd64BitE820Ram,
a followup patch will use it for all memory detection.
No functional change.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add virtio-mmio support (VirtioMmioDeviceLib and VirtioFdtDxe).
With this patch added and a new enough qemu version (6.2+) edk2
will detect virtio-mmio devices, so it is possible to boot from
storage (virtio-blk, virtio-scsi) or network (virtio-net).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
FdtClient is unhappy without a device tree, so add an empty fdt
which we can use in case etc/fdt is not present in fw_cfg.
On ARM machines a device tree is mandatory for hardware detection,
that's why FdtClient fails hard.
On microvm the device tree is only used to detect virtio-mmio devices
(this patch series) and the pcie host (future series). So edk2 can
continue with limited functionality in case no device tree is present:
no storage, no network, but serial console and direct kernel boot
works.
qemu release 6.2 & newer will provide a device tree for microvm.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add fdt parser from EmbeddedPkg (FdtLib and FdtClientDxe) to MicrovmX64.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Building grub.efi for AmdSev is difficult because it depends on patches
not yet merged to upstream grub. So shortcut the grub build by simply
creating an empty grub.efi file. That allows to at least build-test the
AmdSev variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Skip the qemu boot test in case QEMU_SKIP is set to true.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Move SettingsManager and PlatformBuilder classes to PlatformBuildLib.py
file, keep only CommonPlatform class in PlatformBuild.py. Allows
reusing these classes for other builds. Pure code motion, no functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes build failure:
build.py...
/home/kraxel/projects/edk2/OvmfPkg/Bhyve/BhyveX64.dsc(...): error 1001: Module type [SEC] is not supported by library instance [/home/kraxel/projects/edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [/home/kraxel/projects/edk2/OvmfPkg/Sec/SecMain.inf]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In FvbInitialize Function,
PcdFlashNvStorageVariableBase64 PcdFlashNvStorageFtwWorkingBase
PcdFlashNvStorageFtwSpareBase will not exceed 0x100000000,
Due to truncation and variable type limitations.
That leads to the NV variable cannot be saved to the memory above 4G.
Modify as follows:
1.Remove the forced type conversion of UINT32.
2.Use UINT64 type variables.
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 202fb22be6 "OvmfPkg/SecMain: validate the memory used for
decompressing Fv" broke building OvmfXen with:
edk2/OvmfPkg/OvmfXen.dsc(...): error 1001: Module type [SEC] is not
supported by library instancer
[edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [edk2/OvmfPkg/Sec/SecMain.inf]
The above commit added a reference to MemEncryptSevLib into SecMain.inf,
but OvmfXen.dsc doesn't have a MemEncryptSevLib entry for SEC. Add one
like OvmfPkgX64.dsc has.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Adding support for retrieving the Cloud Hypervisor ACPI tables as a
fallback mechanism if tables are not found through fw_cfg.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Don't make the package Qemu centric so that we can introduce some
alternative support for other VMMs not using the fw_cfg mechanism.
This patch is purely about renaming existing files with no functional
change.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a fallback on the SMBIOS code to find the SMBIOS table for Cloud
Hypervisor if it couldn't be found for Qemu through fw_cfg.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the generic entry point part out of Qemu.c to anticipate the
addition of new ways of retrieving the SMBIOS table.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
PrintDxe produces gEfiPrint2ProtocolGuid and gEfiPrint2SProtocolGuid,
and those are consumed by the following PrintLib instance:
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf
However, none of the OVMF DSC files contain such a PrintLib class
resolution, so none of the OVMF platforms need PrintDxe.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3744
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Now that both the secrets and cpuid pages are reserved in the HOB,
extract the location details through fixed PCD and make it available
to the guest OS through the configuration table.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
When SEV-SNP is active, the CPUID and Secrets memory range contains the
information that is used during the VM boot. The content need to be persist
across the kexec boot. Mark the memory range as Reserved in the EFI map
so that guest OS or firmware does not use the range as a system RAM.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
The SetMemoryEncDec() is used by the higher level routines to set or clear
the page encryption mask for system RAM and Mmio address. When SEV-SNP is
active, in addition to set/clear page mask it also updates the RMP table.
The RMP table updates are required for the system RAM address and not
the Mmio address.
Add a new parameter in SetMemoryEncDec() to tell whether the specified
address is Mmio. If its Mmio then skip the page state change in the RMP
table.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSev{Set,Clear}PageEncMask() functions are used to set or
clear the memory encryption attribute in the page table. When SEV-SNP
is active, we also need to change the page state in the RMP table so that
it is in sync with the memory encryption attribute change.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Version 2 of the GHCB specification added the support to query the
hypervisor feature bitmap. The feature bitmap provide information
such as whether to use the AP create VmgExit or use the AP jump table
approach to create the APs. The MpInitLib will use the
PcdGhcbHypervisorFeatures to determine which method to use for creating
the AP.
Query the hypervisor feature and set the PCD accordingly.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MpInitLib uses the ConfidentialComputingAttr PCD to determine whether
AMD SEV is active so that it can use the VMGEXITs defined in the GHCB
specification to create APs.
Cc: Michael Roth <michael.roth@amd.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
When SEV-SNP is active, a memory region mapped encrypted in the page
table must be validated before access. There are two approaches that
can be taken to validate the system RAM detected during the PEI phase:
1) Validate on-demand
OR
2) Validate before access
On-demand
=========
If memory is not validated before access, it will cause a #VC
exception with the page-not-validated error code. The VC exception
handler can perform the validation steps.
The pages that have been validated will need to be tracked to avoid
the double validation scenarios. The range of memory that has not
been validated will need to be communicated to the OS through the
recently introduced unaccepted memory type
https://github.com/microsoft/mu_basecore/pull/66, so that OS can
validate those ranges before using them.
Validate before access
======================
Since the PEI phase detects all the available system RAM, use the
MemEncryptSevSnpValidateSystemRam() function to pre-validate the
system RAM in the PEI phase.
For now, choose option 2 due to the dependency and the complexity
of the on-demand validation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The VMM launch sequence should have pre-validated all the data pages used
in the Reset vector. The range does not cover the data pages used during
the SEC phase (mainly PEI and DXE firmware volume decompression memory).
When SEV-SNP is active, the memory must be pre-validated before the access.
Add support to pre-validate the memory range from SnpSecPreValidatedStart
to SnpSecPreValidatedEnd. This should be sufficent to enter into the PEI
phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The initial page built during the SEC phase is used by the
MemEncryptSevSnpValidateSystemRam() for the system RAM validation. The
page validation process requires using the PVALIDATE instruction; the
instruction accepts a virtual address of the memory region that needs
to be validated. If hardware encounters a page table walk failure (due
to page-not-present) then it raises #GP.
The initial page table built in SEC phase address up to 4GB. Add an
internal function to extend the page table to cover > 4GB. The function
builds 1GB entries in the page table for access > 4GB. This will provide
the support to call PVALIDATE instruction for the virtual address >
4GB in PEI phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSevSnpPreValidateSystemRam() is used for pre-validating the
system RAM. As the boot progress, each phase validates a fixed region of
the RAM. In the PEI phase, the PlatformPei detects all the available RAM
and calls to pre-validate the detected system RAM.
While validating the system RAM in PEI phase, we must skip previously
validated system RAM to avoid the double validation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide the hardware isolated
abstraction layers with a VM. The VMPL0 is the highest privilege, and
VMPL3 is the least privilege. Certain operations must be done by the
VMPL0 software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SEV-SNP support assumes that the guest is running on VMPL0.
Let's add function in the MemEncryptSevLib that can be used for checking
whether guest is booted under the VMPL0.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The guest can request the
hypervisor to add pages in the RMP table via the Page State Change VMGEXIT
defined in the GHCB specification section 2.5.1 and 4.1.6. Inside each RMP
entry is a Validated flag; this flag is automatically cleared to 0 by the
CPU hardware when a new RMP entry is created for a guest. Each VM page
can be either validated or invalidated, as indicated by the Validated
flag in the RMP entry. Memory access to a private page that is not
validated generates a #VC. A VM can use the PVALIDATE instruction to
validate the private page before using it.
During the guest creation, the boot ROM memory is pre-validated by the
AMD-SEV firmware. The MemEncryptSevSnpValidateSystemRam() can be called
during the SEC and PEI phase to validate the detected system RAM.
One of the fields in the Page State Change NAE is the RMP page size. The
page size input parameter indicates that either a 4KB or 2MB page should
be used while adding the RMP entry. During the validation, when possible,
the MemEncryptSevSnpValidateSystemRam() will use the 2MB entry. A
hypervisor backing the memory may choose to use the different page size
in the RMP entry. In those cases, the PVALIDATE instruction should return
SIZEMISMATCH. If a SIZEMISMATCH is detected, then validate all 512-pages
constituting a 2MB region.
Upon completion, the PVALIDATE instruction sets the rFLAGS.CF to 0 if
instruction changed the RMP entry and to 1 if the instruction did not
change the RMP entry. The rFlags.CF will be 1 only when a memory region
is already validated. We should not double validate a memory
as it could lead to a security compromise. If double validation is
detected, terminate the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Commit 85b8eac59b added support to ensure
that MMIO is only performed against the un-encrypted memory. If MMIO
is performed against encrypted memory, a #GP is raised.
The AmdSevDxe uses the functions provided by the MemEncryptSevLib to
clear the memory encryption mask from the page table. If the
MemEncryptSevLib is extended to include VmgExitLib then depedency
chain will look like this:
OvmfPkg/AmdSevDxe/AmdSevDxe.inf
-----> MemEncryptSevLib class
-----> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
-----> VmgExitLib class
-----> "OvmfPkg/VmgExitLib" instance
-----> LocalApicLib class
-----> "UefiCpuPkg/BaseXApicX2ApicLib/BaseXApicX2ApicLib.inf" instance
-----> TimerLib class
-----> "OvmfPkg/AcpiTimerLib/DxeAcpiTimerLib.inf" instance
-----> PciLib class
-----> "OvmfPkg/DxePciLibI440FxQ35/DxePciLibI440FxQ35.inf" instance
-----> PciExpressLib class
-----> "MdePkg/BasePciExpressLib/BasePciExpressLib.inf" instance
The LocalApicLib provides a constructor that gets called before the
AmdSevDxe can clear the memory encryption mask from the MMIO regions.
When running under the Q35 machine type, the call chain looks like this:
AcpiTimerLibConstructor () [AcpiTimerLib]
PciRead32 () [DxePciLibI440FxQ35]
PciExpressRead32 () [PciExpressLib]
The PciExpressRead32 () reads the MMIO region. The MMIO regions are not
yet mapped un-encrypted, so the check introduced in the commit
85b8eac59b raises a #GP.
The AmdSevDxe driver does not require the access to the extended PCI
config space. Accessing a normal PCI config space, via IO port should be
sufficent. Use the module-scope override to make the AmdSevDxe use the
BasePciLib instead of BasePciExpressLib so that PciRead32 () uses the
IO ports instead of the extended config space.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The SEV-SNP guest requires that GHCB GPA must be registered before using.
See the GHCB specification section 2.3.2 for more details.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
SEV-SNP firmware allows a special guest page to be populated with
guest CPUID values so that they can be validated against supported
host features before being loaded into encrypted guest memory to be
used instead of hypervisor-provided values [1].
Add handling for this in the CPUID #VC handler and use it whenever
SEV-SNP is enabled. To do so, existing CPUID handling via VmgExit is
moved to a helper, GetCpuidHyp(), and a new helper that uses the CPUID
page to do the lookup, GetCpuidFw(), is used instead when SNP is
enabled. For cases where SNP CPUID lookups still rely on fetching
specific CPUID fields from hypervisor, GetCpuidHyp() is used there as
well.
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The SEV-SNP guest requires that GHCB GPA must be registered before using.
See the GHCB specification section 2.3.2 for more details.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Create a function that can be used to determine if VM is running as an
SEV-SNP guest.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
CPUID instructions are issued during early boot to do things like probe
for SEV support. Currently these are handled by a minimal #VC handler
that uses the MSR-based GHCB protocol to fetch the CPUID values from
the hypervisor. When SEV-SNP is enabled, use the firmware-validated
CPUID values from the CPUID page instead [1].
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
An SEV-SNP guest requires that private memory (aka pages mapped encrypted)
must be validated before being accessed.
The validation process consist of the following sequence:
1) Set the memory encryption attribute in the page table (aka C-bit).
Note: If the processor is in non-PAE mode, then all the memory accesses
are considered private.
2) Add the memory range as private in the RMP table. This can be performed
using the Page State Change VMGEXIT defined in the GHCB specification.
3) Use the PVALIDATE instruction to set the Validated Bit in the RMP table.
During the guest creation time, the VMM encrypts the OVMF_CODE.fd using
the SEV-SNP firmware provided LAUNCH_UPDATE_DATA command. In addition to
encrypting the content, the command also validates the memory region.
This allows us to execute the code without going through the validation
sequence.
During execution, the reset vector need to access some data pages
(such as page tables, SevESWorkarea, Sec stack). The data pages are
accessed as private memory. The data pages are not part of the
OVMF_CODE.fd, so they were not validated during the guest creation.
There are two approaches we can take to validate the data pages before
the access:
a) Enhance the OVMF reset vector code to validate the pages as described
above (go through step 2 - 3).
OR
b) Validate the pages during the guest creation time. The SEV firmware
provides a command which can be used by the VMM to validate the pages
without affecting the measurement of the launch.
Approach #b seems much simpler; it does not require any changes to the
OVMF reset vector code.
Update the OVMF metadata with the list of regions that must be
pre-validated by the VMM before the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Platform features and capabilities are traditionally discovered via the
CPUID instruction. Hypervisors typically trap and emulate the CPUID
instruction for a variety of reasons. There are some cases where incorrect
CPUID information can potentially lead to a security issue. The SEV-SNP
firmware provides a feature to filter the CPUID results through the PSP.
The filtered CPUID values are saved on a special page for the guest to
consume. Reserve a page in MEMFD that will contain the results of
filtered CPUID values.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
During the SNP guest launch sequence, a special secrets page needs to be
inserted by the VMM. The PSP will populate the page; it will contain the
VM Platform Communication Key (VMPCKs) used by the guest to send and
receive secure messages to the PSP.
The purpose of the secrets page in the SEV-SNP is different from the one
used in SEV guests. In SEV, the secrets page contains the guest owner's
private data after the remote attestation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The OvmfPkgX86 build reserves memory regions in MEMFD. The memory regions
get accessed in the SEC phase. AMD SEV-SNP require that the guest's
private memory be accepted or validated before access.
Introduce a Guided metadata structure that describes the reserved memory
regions. The VMM can locate the metadata structure by iterating through
the reset vector guid and process the areas based on the platform
specific requirements.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
In preparation for SEV-SNP support move clearing of the GHCB memory from
the ResetVector/AmdSev.asm to SecMain/AmdSev.c. The GHCB page is not
accessed until SevEsProtocolCheck() switch to full GHCB. So, the move
does not make any changes in the code flow or logic. The move will
simplify the SEV-SNP support.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Move all the SEV specific function in AmdSev.c.
No functional change intended.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the OvmfPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3731
Fix VS2019 NOOPT build issues with OvmfPkg/Microvm/MicrovmX64.dsc
by fixing typecast of MICROVM_GED_MMIO_BASE_REGS to a VOID *.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3724
Add typecast to fix build error with VS2019 X64 NOOPT converting
a UINT64 value to UINT32 value.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3722
Fix VS2019 NOOPT build issues related to converting
a larger integer value to a smaller integer value.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3688
Use DEBUG_LINE_NUMBER instead of __LINE__.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Michael Kubacki <michael.kubacki@microsoft.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
Note: Intel TDX is only available on X64, so the Tdx related changes are
in X64 path. In IA32 path, there may be null stub to make the build
success.
This patch includes below major changes.
1. Ia32/IntelTdx.asm
IntelTdx.asm includes below routines used in ResetVector
- IsTdx
Check if the running system is Tdx guest.
- InitTdxWorkarea
It initialize the TDX_WORK_AREA. Because it is called by both BSP and
APs and to avoid the race condition, only BSP can initialize the
WORK_AREA. AP will wait until the field of TDX_WORK_AREA_PGTBL_READY
is set.
- ReloadFlat32
After reset all CPUs in TDX are initialized to 32-bit protected mode.
But GDT register is not set. So this routine loads the GDT then jump
to Flat 32 protected mode again.
- InitTdx
This routine wrap above 3 routines together to do Tdx initialization
in ResetVector phase.
- IsTdxEnabled
It is a OneTimeCall to probe if TDX is enabled by checking the
CC_WORK_AREA.
- CheckTdxFeaturesBeforeBuildPagetables
This routine is called to check if it is Non-TDX guest, TDX-Bsp or
TDX-APs. Because in TDX guest all the initialization is done by BSP
(including the page tables). APs should not build the tables.
- TdxPostBuildPageTables
It is called after Page Tables are built by BSP.
byte[TDX_WORK_AREA_PGTBL_READY] is set by BSP to indicate APs can
leave spin and go.
2. Ia32/PageTables64.asm
As described above only the TDX BSP build the page tables. So
PageTables64.asm is updated to make sure only TDX BSP build the
PageTables. TDX APs will skip the page table building and set Cr3
directly.
3. Ia16/ResetVectorVtf0.asm
In Tdx all CPUs "reset" to run on 32-bit protected mode with flat
descriptor (paging disabled). But in Non-Td guest the initial state of
CPUs is 16-bit real mode. To resolve this conflict, BITS 16/32 is used
in the ResetVectorVtf0.asm. It checks the 32-bit protected mode or 16-bit
real mode, then jump to the corresponding entry point.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX when host VMM creates a new guest TD, some initial set of
TD-private pages are added using the TDH.MEM.PAGE.ADD function. These
pages typically contain Virtual BIOS code and data along with some clear
pages for stacks and heap. In the meanwhile, some configuration data
need be measured by host VMM. Tdx Metadata is designed for this purpose
to indicate host VMM how to do the above tasks.
More detailed information of Metadata is in [TDVF] Section 11.
Tdx Metadata describes the information about the image for VMM use.
For example, the base address and length of the TdHob, Bfv, Cfv, etc.
The offset of the Metadata is stored in a GUID-ed structure which is
appended in the GUID-ed chain from a fixed GPA (0xffffffd0).
In this commit there are 2 new definitions of BFV & CFV.
Tdx Virtual Firmware (TDVF) includes one Firmware Volume (FV) known
as the Boot Firmware Volume (BFV). The FV format is defined in the
UEFI Platform Initialization (PI) spec. BFV includes all TDVF
components required during boot.
TDVF also include a configuration firmware volume (CFV) that is
separated from the BFV. The reason is because the CFV is measured in
RTMR, while the BFV is measured in MRTD.
In practice BFV is the code part of Ovmf image (OVMF_CODE.fd). CFV is
the vars part of Ovmf image (OVMF_VARS.fd).
Since AMD SEV has already defined some SEV specific memory region in
MEMFD. TDX re-uses some of the memory regions defined by SEV.
- MailBox : PcdOvmfSecGhcbBackupBase|PcdOvmfSecGhcbBackupSize
- TdHob : PcdOvmfSecGhcbBase|PcdOvmfSecGhcbSize
[TDVF] https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-virtual-firmware-design-guide-rev-1.pdf
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously WORK_AREA_GUEST_TYPE was cleared in SetCr3ForPageTables64.
This is workable for Legacy guest and SEV guest. But it doesn't work
after Intel TDX is introduced. It is because all TDX CPUs (BSP and APs)
start to run from 0xfffffff0, thus WORK_AREA_GUEST_TYPE will be cleared
multi-times if it is TDX guest. So the clearance of WORK_AREA_GUEST_TYPE
is moved to Main16 entry point in Main.asm.
Note: WORK_AREA_GUEST_TYPE is only defined for ARCH_X64.
For Intel TDX, its corresponding entry point is Main32 (which will be
introduced in next commit in this patch-set). WORK_AREA_GUEST_TYPE will
be cleared there.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously OvmfPkg/ResetVector uses the Main.asm in
UefiCpuPkg/ReseteVector/Vtf0. In this Main.asm there is only Main16
entry point.
This patch-set is to introduce Intel TDX into Ovmf. Main32 entry point
is needed in Main.asm by Intel TDX. To reduce the complexity of Main.asm
in UefiCpuPkg, OvmfPkg create its own Main.asm to meet the requirement
of Intel TDX. This Main.asm is an unmodified copy (so no functional
change) and the actual changes for tdx come as incremental patches.
UefiCpuPkg/ResetVector/Vtf0/main.asm -> OvmfPkg/ResetVector/Main.asm
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The commit 80e67af9af added support for the generic work area concept
used mainly by the encrypted VMs but missed update the AmdSev package.
Fixes: 80e67af9af ("OvmfPkg: introduce a common work area")
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The commit 80e67af9af added support for the generic work area concept
used mainly by the encrypted VMs. In the past, the work area was
preliminary used by the SEV-ES VMs. The SEV-ES support is available for
the X64 builds only. But now, that work area header contains fields that
nonencrypted VMs and SEV VMs can use. They can be built for IA32. So,
moving the work area defines outside of X64.
Fixes: 80e67af9af ("OvmfPkg: introduce a common work area")
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate VirtioFdtDxe to OvmfPkg/Fdt, this driver is leverage by
both ARM and RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs. Also use
PcdPciMmio32Translation and PcdPciMmio64Translation
PCDs provided by MdePkg instead of ArmPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate QemuFwCfgLib to OvmfPkg/Library/QemuFwCfgLib and rename
it to QemuFwCfgLibMmio, this library is leverage by both ARM and
RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Add RISC-V VM in the file header.
Add RISC-V to the supported arch.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate HighMemDxe to OvmfPkg/Fdt, this library is leverage by
both ARM and RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Relocate PciPcdProducerLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs.
Add OvmfPkg/Fdt maintainers in Maintainers.txt
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Microvm has no LPC bridge, so drop the PciSioSerialDxe driver.
Use SerialDxe instead, with ioport hardcoded to 0x3f8 aka com1 aka ttyS0.
With this tianocore boots to uefi shell prompt on the serial console.
Direct kernel boot can be used too.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Shortcut PCI support for now (proper PCIe
support will be wired up later).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Microvm has no acpi timer, so go use XenTimerDxe
which uses the local apic instead.
Set PcdFSBClock to 1000 MHz, which is the lapic
timer frequency used by KVM.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Microvm has no acpi timer, so use the generic lib instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Microvm focus is virtio, so go drop support
for emulated scsi host adapters.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Guests depending on BIOS will probably not work that well with microvm
due to legacy hardware being not available.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Microvm has no TPM support.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Without SMM secure boot isn't actually secure, so drop it too.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Rename the firmware volume files (s/OVMF/MICROVM/).
Fix includes so they work with microvm config being in a subdirectory.
With this patch applied the build works.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Create Microvm subdirectory. Copy OvmfPkgX64 .dsc and .fdf files
unmodified as starting point for MicrovmX64.
Changes come as separate patches, to simplify patch review and rebases.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Compile the Tcg2PlatformPei related code now to support TPM 2 platform
hierachy disablement if the TPM state cannot be resumed upon S3 resume.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Handle the TPM 2 physical presence interface (PPI) opcodes in
PlatformBootManagerBeforeConsole() before the TPM 2 platform hierarchy
is disabled. Since the handling of the PPI opcodes may require inter-
action with the user, initialize the keyboard before handling PPI codes.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Activate the default console when user interaction is required for
the processing of TPM 2 physical presence interface opcodes.
Background:
TPM 2 physical presence interface (PPI) opcodes need to be handled before
the TPM 2 platform hierarchy is disabled. Due to this requirement we will
move the function call to handle the PPI opcodes into
PlatformBootManagerBeforeConsole() which runs before the initialization
of the consoles. However, since for interaction with the user we need
the console to be available, activate it now before displaying any message
to the user.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
SEC checks in IsSevGuest if the PCD defined WorkAreaHeader size
matches the size of the WorkAreaHeader struct definition. Set a
default value for the PCD to avoid unnecessary DSC/FDF file
changes in all OVMF DSC/FDF files.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3621
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3631
Refactor initialization of CPU features during S3 resume.
In addition, the macro ACPI_CPU_DATA_STRUCTURE_UPDATE is used to fix
incompatibility issue caused by ACPI_CPU_DATA structure update. It will
be removed after all the platform code uses new ACPI_CPU_DATA structure.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Ard Biesheuvel
Gerd Hoffmann
lixianglai
Jason Andryuk
Sebastien Boeuf
Philippe Mathieu-Daude
Brijesh Singh
Brijesh Singh via groups.io
Michael Roth
Michael Kubacki
Michael D Kinney
Min Xu
Abner Chang
Stefan Berger
Corvin Köhne
Lou, Yun