Reposition blocks of code to remove redundant forward function
declarations in order to reduce the code size.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1964
If the file begin with single line Feed ('\n'), then
"AsciiChar == '\n' && ((CHAR8*)Buffer)[LoopVar-1] != '\r'"
would cause a underflow. Add this condition
"(AsciiChar == '\n' && LoopVar == 0)" before it to make sure
(LoopVar - 1) would never encounter a underflow.
Same change in Unicode section.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Make the -h command line option a binary flag. Now, colour
highlighting is enabled whenever this flag is set (stateless),
instead of being dependent on previous acpiview command
invocations.
By removing the parameter required with the -h flag the command
line parsing logic becomes simpler.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Remove redundant whitespace characters at the beginning of the strings
describing IORT table field names.
When dumping ACPI table contents, the indentation level for printing
field names is controled using the 'Indent' argument to the 'ParseAcpi'
function. In the IORT acpiview parser, both 'Indent' and extra
whitespace characters are used for indentation, which results in
excess indentation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to the acpiview documentation, the -v flag enables verbose
output and it is set on default.
Moreover, the acpiview UEFI shell tool dumps the same output with
and without this flag set.
Therefore this patch removes the superfluous -v flag from allowed
command line parameters.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Replace the enum defining valid node types in the IORT table with
macros from IoRemappingTable.h.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The current documentation for the acpiview UEFI shell tool states
that the '-c' flag enables consistency checks on ACPI table data.
However, these checks are enabled anyway by default.
This patch keeps ACPI table validation as a default option, but it
makes it possible to turn ACPI table validation off by setting the
newly-introduced '-q' flag. Consequently, the '-c' flag is removed.
The remaining code changes in this patch make a number of consistency
checks optional (but enabled by default):
1. ACPI table field offset mismatch.
2. ACPI table field validation functions provided in the ACPI_PARSER
arrays.
3. Table checksum computation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Print an extra newline character at the end DBG2 table parsing in order
to make the output resemble the one for other ACPI table parsers.
With this change, there is now a blank line between the DBG2 table dump
and the 'Table Statistics' section.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Move printing double newline character ('\n\n') from the beginning of
ACPI table checksum validation message to the end of the raw binary
data dump.
This way acpiview table dump looks similar regardless of whether Table
Checksum is validated or not.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acpiview currently allows displaying help info by specifying both
-? and /? flags. This patch removes /? from valid command line
flags that can be passed to the acpiview tool, as this
flag is not used for such purpose in other UEFI shell commands.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1906
While failed to allocate memory to save the response,
set the input/output parameter 'Response'(VOID **) to
NULL to indicate the failure not only depend on the
returned status.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The ACPI 6.3 specification introduces a 'SPE overflow
Interrupt' field as part of the GICC structure.
Update the MADT parser to decode this field and validate
the interrupt ID used.
References:
- ACPI 6.3 Specification - January 2019
- Arm Generic Interrupt Controller Architecture Specification,
GIC architecture version 3 and version 4, issue E
- Arm Server Base System Architecture 5.0
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1498
This patch fix following bugs in func DisplaySysEventLogData:
1. Log increment (Log = (LOG_RECORD_FORMAT *) (LogData + Offset);)
should happened in the end of while loop, not in the very beginning.
2. DisplaySELTypes function should be used in while loop instead of
DisplaySELVarDataFormatType.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ACPI 6.3 specification introduces support to describe
the ARMv8.1 virtual EL2 timers. This patch updates the GTDT parser
of acpiview to decode the EL2 virtual timer fields.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
NetLib will be moved from MdeModulePkg and NetworkPkg.
So, the module that consumes NetLib need to depend on NetworkPkg.dec.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ID Type Structure (Type 2) inside the Processor Properties
Topology Table (PPTT) has a VENDOR_ID field which identifies the
node vendor. The approved values are listed in the ACPI ID Registry
and they are meant to be interpreted as arrays of ASCII characters.
This change to the acpiview parser for PPTT aims to reflect that.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removed conditional pre-compiling for ARM CPUs because function
ValidateCacheAttributes(..) is based on ACPI PPTT specification.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ACPI 6.2 specification mandates that the Generic Timer (GT) Block
Timer Structures must have a frame number in the range 0-7.
Update the GTDT parser to warn if this condition is violated.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
ExtendedSalBootService.h, ExtendedSalServiceClasses.h and
McaInitPmi.h will be deleted. So remove the Guids defined
in these Protocols. And also remove strings in uni file.
https://bugzilla.tianocore.org/show_bug.cgi?id=1560
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
With Itanium architecture unsupported, gEfiSalSystemTableGuid
and gEfiMpsTableGuid will be no longer used.
https://bugzilla.tianocore.org/show_bug.cgi?id=1560
v2:Withdraw the removal of #include <Guid/Mps.h> and
gEfiMpsTableGuid.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1153
The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The parameter FilePath of ShellOpenFileByName defined in
ShellLib.h is incorrect. It should be FileName.
https://bugzilla.tianocore.org/show_bug.cgi?id=1221
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1146
Add DSDT and SSDT description in the help information. Depend
on the implement of UefiShellAcpiViewCommandLib, the "acpiview"
command support to show all present type in the system not only
support the listed type in the help information. So change the
help information of this command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1528
Shell delay option without parameters do not check the
index of shell parameter argv. Add index check to avoid
invalid pointer references.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Substitute InternalShellCharToUpper with CharToUpper which is a public
function with the same effect.
Remove the implement of InternalShellCharToUpper.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Substitute InternalShellCharToUpper with a public function
CharToUpper which has the same function.
Remove the implement of InternalShellCharToUpper.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1491
This patch is to update the data type of variable "Offset"
from UINT8 to UINT32 to fix following build issue.
...\Parsers\Pptt\PpttParser.c(193): error C2220:
warning treated as error - no 'object' file generated
...\Parsers\Pptt\PpttParser.c(193): warning C4244: '=':
conversion from 'UINT32' to 'UINT8', possible loss of data
Cc: Krzysztof Koch <krzysztof.koch@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Tftp command always returned "SHELL_NOT_FOUND" which is treated as an
error by callers. Add missing line to clean the ShellStatus on
successful operation. If operation has failed, return the error status
if available.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1487
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Added the acpiview parser for the PPTT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
v2: Remove an unused variable.
Current logic of shell tftp download was writing file after tftp
download finished, when the file is large, it looks like the shell
tftp command hanged after download was finished. To improve
end-user experience, the solution is using split file writing
instead.
This patch update the code to open and close file inside
DownloadFile(), and save each packet to file within callback
function CheckPacket().
Since AllocatePage() is no-longer needed, This patch can also
remove the memory limitation. The download file can be larger
than system free memory now.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
These wrapper header files are not referenced by all
open source, so they are removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=158
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
[-c <retry count>] is to define the number of times to transmit request
packets and wait for a response. The default value is 6. But it doesn't
specify the behavior of zero value. Here, The patch is to clear that:
Set to zero also means to use the default value.
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Provide fully-qualified path to shell scripts
Section 3.6.2 of version 2.2 of the shell specification requires that
the first positional argument (i.e. arg 0) of a shell script resolves
to "the full path name of the script itself."
Ensure that the startup script and any scripts launched by the shell
meet this requirement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a function to return a clean, fully-qualified version of some path.
This function handles a (possibly "dirty") input path that may or may
not include a file system reference.
If it does not include a file system reference, then if the input path
does not begin with a forward or backward slash, then the input path is
relative to the current working directory of the current file system.
Otherwise, it is an absolute path within the current file system.
If it does include a file system reference, it may be a reference to the
current or some other file system. If the file system reference is not
immediately followed by a forward or backward slash, then the input path
is relative to the current working directory of the given file system.
Otherwise, it is an absolute path within the given file system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1236
When "dmem" runs without additional arguments, it dumps the memory
content of EFI_SYSTEM_TABLE. But today's implementation dumps 512
bytes. It's not correct because sizeof (EFI_SYSTEM_TABLE) is less
than 512, the 512-read causes page fault exception in a heap-guard
enabled environment.
The patch changes the implementation to only dump
sizeof (EFI_SYSTEM_TABLE) bytes for gST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@.com>
ShellPkg-Cd: Ensure all valid cd targets are handled properly
Make sure that PathCleanUpDirectories() is called on all valid targets
of the cd command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Create a homefilesystem environment variable whose value is the file
system on which the executing shell is located. For example: "FS14:".
This eliminates the need for people to have to try and find the "boot"
file system in their startup script. After this change they can simply
execute %homefilesystem% to set the cwd to the root of the file system
where the shell is located.
A future enhancement could be to add "homefilesystem" to the list of
predefined, read-only variables listed in the EfiShellSetEnv function of
file ShellProtocol.c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCD below is unused, so it has been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellPrintBufferSize
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in DpApp.inf
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in
DpDynamicCommand.inf
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize
gEfiShellPkgTokenSpaceGuid.PcdShellMapNameLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1217
Local variable 'Mtftp4Token' might be uninitialized when error happen. This patch is to
resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch updates DpDynamicCommand to use new
EfiLocateFirstAcpiTable() and remove the duplicated code.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to define one new option for TFTP shell command to specify the
windowsize option as defined in RFC 7440. Valid range is between 1 and 64,
default value is 1.
Note that: RFC 7440 does not mention max window size value, but for the
stability reason, the value is limited to 64.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The unused global variable InvalidChars is removed.
It is only used in the function IsValidCommandName which
was removed previously.
https://bugzilla.tianocore.org/show_bug.cgi?id=1066
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The redundant functions which are never called have been
removed. They are InternalShellProtocolDebugPrintMessage,
UpdateFileName,RemoveFileTag and IsValidCommandName.
https://bugzilla.tianocore.org/show_bug.cgi?id=1066
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Update SmbiosView to parse the new definitions which
are introduced in SMBIOS3.2.0
V2:
1. Add structure length check before dump the fileds in
Type 9 and Type 17 in case some fileds are not organized
and reported by drivers.
2. Dump the InterfaceTypeSpecificData in Type 42.
V3:
1. Correct the structure length in Type17.
2. Remove the redundant check "if (PeerGroupCount > 0)" in Type 9.
3. Use the Uint16 filed instead of Bits field in union
MEMORY_DEVICE_OPERATING_MODE_CAPABILITY to dump data.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The issue was found when heap guard is turned on.
PrintLib somehow receives a non-null terminated string in var-arg.
When the PrintLib implementation reads the string it keeps
reading because no null-terminator is met, which triggers the page
fault set by the heap guard.
The issue is caused by a bug in FileBufferPrintLine().
When "edit" opens a binary file, in FileBufferPrintLine(),
the Line->Buffer may start with \x00 \x00, but the Line->Size is
larger than MainEditor.ScreenSize.Column, it causes the PrintLine is
set to an empty string by below call:
StrnCpyS (
PrintLine, BufLen/sizeof(CHAR16), Buffer,
MIN(Limit, MainEditor.ScreenSize.Column)
);
But since Limit (equals to Line->Size) is larger than
MainEditor.ScreenSize.Column, below for-loop doesn't successfully
set the whole PrintLine to all-empty-space.
for (; Limit < MainEditor.ScreenSize.Column; Limit++) {
PrintLine[Limit] = L' ';
}
So after the for-loop, PrintLine is still an empty string.
Later in below call, the PrintLine2 is created based on PrintLine.
ShellCopySearchAndReplace (
PrintLine, PrintLine2,
BufLen * 2, L"%", L"^%", FALSE, FALSE
);
But due to the implementation of ShellCopySearchAndReplace(),
PrintLine2 is untouched and INVALID_PARAMETER is returned.
Finally an uninitialized string is passed to ShellPrintEx()
which causes the #PF exception.
The fix is to reset Limit to StrLen(PrintLine) before for-loop.
So that PrintLine can be converted from an empty string to a
string containing all spaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1080
Per Shell spec 2.2 chapter 3.4.4.2, Unicode file tag should be
inserted in the output from the input redirected variable, to ensure
it looks like a UCS-2 encode file.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "<a" is used to redirect ASCII file to an application, Shell
core reads the ASCII file and converts the ASCII to Unicode as the
input source of the application.
But per Shell spec, the input source should have \xFEFF to indicate
it's a Unicode stream.
The patch adds the missing \xFEFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
Per Shell spec, the environment variable has a case-sensitive name.
But today's implementation of EfiShellSetEnv() compares the
environment variable name case insensitively, which causes variable
like "CWD" cannot be set due to "cwd" is pre-defined variable.
The patch fixes this issue.
The EfiShellGetEnv() doesn't have such issue because it will
call into ShellFindEnvVarInList() which uses StrCmp().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@dell.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Currently DP tool will cumulate the performance data for
Driver Binding Support/Start, will count the number they
appears, and record the maximum/minimum time value...
Now add Driver Binding Stop performance data to the
cumulative data to keep consistency.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch adds UefiShellAcpiViewCommandLib INF file into
[Components] section of ShellPkg.dsc so this library can be built
in ShellPkg level build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is to fix the issue reported from
https://bugzilla.tianocore.org/show_bug.cgi?id=925.
DataSize variable was not assigned the value if ShellOpenFileByName returns error.
In the such a case, it should not be used to FreePages. Instead, DataSize can be
used to record the file size once DownloadFile successfully.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
New added checkers includes:
1. Too many invalid parameters
2. Too few parameter
3. Invalid number parameter for -n and -t flag
4. Conflict parameter of -A and -R.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Since performance library instances have been updated
to create new FPDT records for new Perf macros.
So enhance dp tool to parse the new FPDT records.
Enhancement mainly includes:
1. parse the single records for PERF_EVENT macro
2. Parse the new added FPDT_DUAL_GUID_STRING_EVENT_RECORD
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Today's implementation returns 0 even when compared files are
different.
The patch returns 27 (SHELL_NOT_QUAL) in such case to follow
the shell spec.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Currently in DP, the Trace mode is enabled by default.
And the profile mode is not implemented. but the help info
of DP tool doesn't match current implementation. Which will
make user confused. So now remove the unused source code
related to the profile mode and update the help information
of DP tool.
V2: Remove the unused code related to profile mode.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Issue:
When run "dp -s" or ("dp -v") command in shell several times,
the summary reuslts are different each time.
The root cause is that the previous global data "SummaryData"
is not cleaned when the dp command is callled next time.
This patch initializes the global data "SummaryData"
when the dp dymanic command is called.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Run dp command now:
Firstly it will get performance records from FPDT and then
parse the DP command. And if encounter invalid parameters,
it will exit directly. Thus the performance records got before
are invalid. And what's worse is that the memory allocated in
getting performance records phase is not freed.
This patch update the code to parse the command firstly and
then get the performance records. And make sure that all the
clean work has been done before exiting.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Separate variable definition and initialization.
2. Make the variable naming following Edk2 rule.
V2: Remove the updates of guard macros in header files.
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Evan Lloyd <evan.lloyd@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
TrEE is deprecated. We need use Tcg2.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Within function UpdateDisplayFromHistory():
When getting a character with different attribute with the current one,
the statement to compare the character with a 'NULL' char should be:
*StringSegmentEnd != CHAR_NULL
rather than:
StringSegmentEnd != CHAR_NULL
This commit resolves this typo.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Neither the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL nor the EFI_CPU_IO2_PROTOCOL
impose any restrictions when it comes to the range of valid I/O
addresses. Even so, the 'mm' command in -IO mode refuses to perform
accesses to addresses >= 0xffff.
It is not up to 'mm' to impose this restriction, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Issue:
Reply for first ping packet was getting dropped.
Cause:
Sometimes reply message comes even before trasmit
function returns, hence missing 1st reply
Fix:
Prepare the TxList before calling Transmit function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
After commit 20ddbc133f
* MdeModulePkg/ConSplitter: ReadKeyStrokeEx always return key state
When one physical console supports to report the shift key state,
the key data returned from ConSplitter driver at least carries
the shift key valid bit.
The patch fixes the edit/hexedit to accept Unicode (1) when
the no shift key is pressed or reported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
TimerLib had to be resolved in commit 5ab97a64b5 ("ShellPkg/bcfg: Add
Shell Spec 2.2 modification functionality", 2017-03-01) because:
- the BCFG command started making calls to UefiBootManagerLib
(EfiBootManagerVariableToLoadOption(),
EfiBootManagerLoadOptionToVariable(), EfiBootManagerFreeLoadOption()),
- and "MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf"
depended on TimerLib.
Because TimerLib is platform-specific, but "ShellPkg/ShellPkg.dsc" is
meant to produce a UEFI shell binary that is platform-independent (see
"ShellBinPkg/ReadMe.txt"), we resolved TimerLib to
"BaseTimerLibNullTemplate.inf". (TimerLib functionality was never actually
needed on UefiBootManagerLib code paths that were exercised by the shell /
BCFG.)
Thanks to the last patch, UefiBootManagerLib no longer depends on
TimerLib, thus we can drop the TimerLib resolution entirely.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Shell core was enhanced to find the manual string in PE resource
section. But the finding algorithm is too strict: If the manual is
written beginning with:
.TH command 0 "descripton of command"
but user types "COMMAND.efi -?". The finding algorithm uses
case-sensitive compare between "command" and "COMMAND" resulting
in the manual cannot be found.
The patch fixes this issue by using existing ManFileFindTitleSection
and ManFileFindSections which compare command case-insensitive.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Make the error message clearer if fail to get ACPI/FPDT table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
An ordinary empty directory should contain "." and ".." entries.
When an empty directory even doesn't contain "." or ".." entry,
FileHandleFindFirstFile() may return error status and a NULL
FileInfo.
IsDirectoryEmpty() implementation in Rm.c doesn't consider this
case and the deference of FileInfo->FileName causes page fault
exception because FileInfo is NULL.
The patch checks the return status of FileHandleFindFirstFile()
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Krzysztof Koch
Zhichao Gao
Bret Barkelew
Dandan Bi
Pierre Gondois
Liming Gao
Shenglei Zhang
Michael D Kinney
Vladimir Olovyannikov via edk2-devel
Songpeng Li
Ruiyu Ni
Jiaxin Wu
Jim.Dailey@dell.com
Star Zeng
Fu Siyuan
Laszlo Ersek
AlexeiFedorov
chenc2
dann frazier
Jiewen Yao
Hao Wu
Ard Biesheuvel
Meenakshi Aggarwal