https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add an implementation of a sample unit test that
demonstrates the use of the UnitTestLib services and
macros and supports being built for execution in a
host environment or for execution on a target in PEI,
DXE, SMM, or UEFI Shell.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add the following library instances that are used to
build unit tests for host and target environments.
* CmockaLib with cmocka submodule to:
https://git.cryptomilk.org/projects/cmocka.git
* DebugLibPosix - Instance of DebugLib based on POSIX
APIs (e.g. printf).
* MemoryAllocationLibPosix - Instance of MemoryAllocationLib
based on POSIX APIs (e.g. malloc/free).
* UnitTestBootLibNull - Null instance of the UnitTestBootLib
* UnitTestBootLibUsbClass - UnitTestBootLib instances that
supports setting boot next to a USB device.
* UnitTestLib - UnitTestLib instance that is designed to work
with PEI, DXE, SMM, and UEFI Shell target environments.
* UnitTestLibCmocka - UintTestLib instance that uses cmocka
APIs and can only be use in a host environment.
* UnitTestPersistenceLibNull - Null instance of the
UnitTestPersistenceLib
* UnitTestPersistenceLibSimpleFileSystem - UnitTestPersistenceLib
instance that can safe the unit test framework state to a
media device that supports the UEFI Simple File System
Protocol.
* UnitTestResultReportLibConOut - UnitTestResultReportLib
instance that sends report results to the UEFI standard
output console.
* UnitTestResultReportLibDebugLib - UnitTestResultReportLib
instance that sends report results to a DebugLib using
DEBUG() macros.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add public interfaces for use by unit test implementations.
* Include path to cmocka library interfaces.
* PcdUnitTestLogLevel to set the unit test logging message
level to filter log messages.
Add private interfaces that are used by UnitTestLib
implementations.
* [Private] UnitTestBootLib - Set boot next to continue unit
tests across a reboot.
* [Private] UnitTestPersistenceLib - Save unit test framework
state to a persistent storage device.
* [Private] UnitTestResultLib - Output unit test results to a
console device.
* [Private] UnitTestFrameworkTypes.h - Internal structures
used by UnitTestLib implementations to keep track if unit
test frameworks, unit test suites, and unit tests along with
the serialized storage format to save a unit test framework
state to persistent storage.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add UnitTestLib class to MdePkg that provides services
and macros to implement unit tests. These services and
macros support the following features:
* Create a Unit Test Framework
* Add a Unit Test Suite to a Unit Test Framework
+ Support optional step that executes before a Unit
Test Suite is started.
+ Support optional step that executes after a Unit
Test Suite is finished.
* Add a Unit Test to a Unit Test Suite
+ Support optional step that executes before a Unit
Test is started.
+ Support optional step that executes after a Unit
Test is finished.
* Run all unit tests added to a Unit Test Framework
* Save Unit Test Framework state to persistent storage
* Support assertion checks in a unit test for TRUE, FALSE,
EQUAL, MEM_EQUAL, NOT_EFI_ERROR, STATUS_EQUAL, and NOT_NULL.
* Support generation of log messages at ERROR, WARN, INFO,
and VERBOSE levels.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add plugin to BaseTools to run host based unit tests.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
* Add plugin to build and run host based unit tests
* Add plugin that performs a DSC complete check DSC files
used to build host based tests
* Update DscCompleteCheck plugin to ignore module INFs with
a MODULE_TYPE of HOST_APPLICATION and library INFs that
only support a module type of HOST_APPLICATION.
* Fix issues in XML reports from checkers.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add Crypto library instances and modules that consume/produce
the EDK II Crypto Protocols/PPIs to the CryptoPkg DSC file.
The default build of CryptoPkg performs a package verification
build.
The CRYPTO_SERVICES define is added that supports the following
settings.
* PACKAGE - Package verification build of all components. Null
versions of libraries are used to minimize build times.
* ALL - Build PEIM, DXE, and SMM drivers. Protocols and PPIs
publish all services.
* NONE - Build PEIM, DXE, and SMM drivers. Protocols and PPIs
publish no services. Used to verify compiler/linker
optimizations are working correctly.
* MIN_PEI - Build PEIM with PPI that publishes minimum required
services.
* MIN_DXE_MIN_SMM - Build DXE and SMM drivers with Protocols that publish
minimum required services.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add the PeiCryptLib, DxeCryptLib, and SmmCryptLib instances
of the BaseCryptLib library classes that are implemented using
the services of EDK II Crypto Protocols/PPIs.
These library instances all set a dependency expression on the
EDK II Crypto Protocols/PPIs, so any modules that use these
library instances are not dispatched until the modules that
produce the EDK II Crypto Protocols/PPIs are dispatched.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add the CryptoPei, CryptoDxe, and CryptoSmm modules that produce
EDK II Crypto Protocols/PPIs that provide the same services as
the BaseCryptLib class.
In order to optimize the size of CryptoPei, CryptoDxe, and
CryptoSmm modules for a specific platform, the FixedAtBuild
PCD gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable
is used to determine if a specific service is enabled or
disabled. If a service is enabled, then a call is made to
the BaseCryptLib service. If the service is disabled, then
a DEBUG() message and ASSERT() are performed and a default
return value is returned. This provides simple detection
of a service that is disabled but is used by another module
when DEBUG()/ASSERT() macros are enabled.
The use of a FixedAtBuild PCD is required so the compiler
and linker know each services enable/disable setting at
build time and allows disabled services to be optimized away.
CryptoPei supports both pre-mem and post-mem use cases.
If CryptoPei is initially dispatched pre-mmem, the the
register for shadow service is used so the Crypto PPI can
be reinstalled post-mem.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add the EDK II Crypto Protocol, EDK II SMM Crypto Protocol
and EDK II Crypto PPI that provide the same services as the
BaseCryptLib. One additional GetVersion() services is provided
to support backward compatible extensions to these new
Protocols/PPIs if new services are added to BaseCryptLib in the
future. The EDK II Crypto Protocols/PPIs are located in a
private directory so they are only available CryptoPkg components.
In order to optimize the size of modules that produce the
EDK II Crypto Protocols/PPIs define a FixedAtBuild PCD
gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.
This PCD is type VOID* and is associated with the structure
PCD_CRYPTO_SERVICE_FAMILY_ENABLE. This structure contains
bitfields and unions that allow a platform DSC files to
enable/disable entire families of services or enable/disable
individual services in the produced EDK II Crypto
Protocols/PPIs.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Add X509ConstructCertificateStackV() to BaseCryptLib that is
identical in behavior to X509ConstructCertificateStack(), but
it takes a VA_LIST parameter for the variable argument list.
The VA_LIST form of this function is required for BaseCryptLib
functions to be wrapped in a Protocol/PPI.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2001
For S3BootScriptLib APIs:
S3BootScriptSaveIoWrite
S3BootScriptSaveMemWrite
S3BootScriptSavePciCfgWrite
S3BootScriptSavePciCfg2Write
S3BootScriptSaveSmbusExecute
S3BootScriptSaveInformation
S3BootScriptSaveInformationAsciiString
S3BootScriptLabel (happen in S3BootScriptLabelInternal())
possible numeric truncations will happen that may lead to S3 boot script
entry with improper size being returned to store the boot script data.
This commit will add checks to prevent this kind of issue.
Please note that the remaining S3BootScriptLib APIs:
S3BootScriptSaveIoReadWrite
S3BootScriptSaveMemReadWrite
S3BootScriptSavePciCfgReadWrite
S3BootScriptSavePciCfg2ReadWrite
S3BootScriptSaveStall
S3BootScriptSaveDispatch2
S3BootScriptSaveDispatch
S3BootScriptSaveMemPoll
S3BootScriptSaveIoPoll
S3BootScriptSavePciPoll
S3BootScriptSavePci2Poll
S3BootScriptCloseTable
S3BootScriptExecute
S3BootScriptMoveLastOpcode
S3BootScriptCompare
are not affected by such numeric truncation.
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Current UpdateCapsule service will reject all non-reset capsule images and
return EFI_OUT_OF_RESOURCE if the system is at runtime. This will block a
platform CapsuleLib from implementing ProcessCapsuleImage() with runtime
capsule processing capability.
This patch removes this restriction. The change is controled by a feature
PCD PcdSupportProcessCapsuleAtRuntime, and the default value is FALSE
which means not enable this feature.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2501
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2472
Replace the ASSERT with the error code return in the TpmPhysicalPresence
and GetTpmCapability.
Add missing error checking after call TpmPhysicalPresence in
TcgPhysicalPresenceLibProcessRequest.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2495
Update the WindowsVsToolChain plugin to setup the VS2017
or VS2019 development environment. This is required to
build BaseTools and Structured PCD host applications.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2495
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Reduce the build and env dependencies for the Structured PCD
application by removing the dependency on Common.lib that
is only built when BaseTools is built which does not
happen if pre-compiled BaseToools are used. Change the
makefile for the Structure PCD application to build all
files from sources which adds PcdValueCommon.c to the
makefile. Also remove PcdValueCommon.c from Common.lib.
With the change to the makefile for the Structured PCD
application, multiple C files are compiled. Only
PcdValueInit.c contains the extra information expected
by the error/warning message parser. Only parse the
DSC line number into an error message if there is an
error/warning in PcdValueInit.c. Errors/warnings in
other files should be passed through. This fixes a build
failure with no useful log information that was observed
when there was a compiler error in PcdValueCommon.c.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2487
The call stack unwindability of the COFF X64 binary requires
the binary to remain the pdata and xdata sections.
Details see the MSVC X64 calling convertion doc in below link:
https://docs.microsoft.com/en-us/cpp/build/x64-calling-convention
Current build options discard or zero the data in pdata and xdata
sections which cause the debugger cannot correctly unwind the
X64 binary call stack in the runtime.
Enhance the build options to force emit the unwind tables and
keep the data of pdata and xdata sections correct in the binary.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2502
This option is required to make GCC49 tool chain work with the high
version GCC compiler.
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Before writing data to FIFO, wait for the serial port to be ready,
to make sure both the transmit FIFO and shift register empty. Code
comment was saying the right thing but code was missing a check.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
The "-tc" option of the iasl compiler allows to generate a
.hex file containing a C array storing AML bytecode.
An online discussion suggested that this "-tc" option
was specific to the iasl compiler and it shouldn't be relied
on. This conversation is available at:
https://edk2.groups.io/g/devel/topic/39786201#49659
A way to address this issue is to implement a compiler
independent script that takes an AML file as input, and
generates a .hex file.
This patch implements a Python script that converts an AML
file to a .hex file, containing a C array storing AML bytecode.
This scipt has been tested with the AML output from the
following compilers supported by the EDKII implementation:
* Intel ASL compiler
* Microsoft ASL compiler
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
We check the author/committer name/email are properly displayed
since commits 8ffa47fb3ab..c0328cf3803. However if PatchCheck.py
uses the mailmap, it will check sanitized names/emails.
Use the --no-use-mailmap option so PatchCheck.py will check
unsanitized input.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Due to strict DMARC / DKIM / SPF rules, Groups.Io sometimes rewrite
the author email. See for example commit df851da3ce.
Add a check to detect these rewrites with PatchCheck.py.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
We added .mailmap to the repository in commit 4a1aeca3bd
to display commit mistakes fixed. Use this option by default in our
git setup.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2415
Avoid using __clang__ to specify CLANGPDB because this macro is also defined
in CLANG38 and this causes CLANG38 build failure.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2463
Perform Data and Address line test only if not ignore memory test.
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2498
Commit fd30b00707 updated the logic in function MicrocodeDetect() that
will directly use the CPUID and PlatformID information from the 'CpuData'
field in the CPU_MP_DATA structure, instead of collecting these
information for each processor via AsmCpuid() and AsmReadMsr64() calls
respectively.
At that moment, this approach worked fine for APs. Since:
a) When the APs are waken up for the 1st time (1st MpInitLibInitialize()
entry at PEI phase), the function InitializeApData() will be called for
each AP and the CPUID and PlatformID information will be collected.
b) During the 2nd entry of MpInitLibInitialize() at DXE phase, when the
APs are waken up again, the function InitializeApData() will not be
called, which means the CPUID and PlatformID information will not be
collected. However, the below logics in MicrocodeDetect() function:
CurrentRevision = GetCurrentMicrocodeSignature ();
IsBspCallIn = (ProcessorNumber == (UINTN)CpuMpData->BspNumber) ? TRUE : FALSE;
if (CurrentRevision != 0 && !IsBspCallIn) {
//
// Skip loading microcode if it has been loaded successfully
//
return;
}
will ensure that the microcode detection and application will be
skipped due to the fact that such process has already been done in the
PEI phase.
But after commit 396e791059, which removes the above skip loading logic,
the CPUID and PlatformID information on APs will be used upon the 2nd
entry of the MpInitLibInitialize(). But since the CPUID and PlatformID
information has not been collected, it will bring issue to the microcode
detection process.
This commit will update the logic in MicrocodeDetect() back to always
collecting the CPUID and PlatformID information explicitly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Now that the SMRAM at the default SMBASE is honored everywhere necessary,
implement the actual detection. The (simple) steps are described in
previous patch "OvmfPkg/IndustryStandard: add MCH_DEFAULT_SMBASE* register
macros".
Regarding CSM_ENABLE builds: according to the discussion with Jiewen at
https://edk2.groups.io/g/devel/message/48082http://mid.mail-archive.com/74D8A39837DF1E4DA445A8C0B3885C503F7C9D2F@shsmsx102.ccr.corp.intel.com
if the platform has SMRAM at the default SMBASE, then we have to
(a) either punch a hole in the legacy E820 map as well, in
LegacyBiosBuildE820() [OvmfPkg/Csm/LegacyBiosDxe/LegacyBootSupport.c],
(b) or document, or programmatically catch, the incompatibility between
the "SMRAM at default SMBASE" and "CSM" features.
Because CSM is out of scope for the larger "VCPU hotplug with SMM"
feature, option (b) applies. Therefore, if the CSM is enabled in the OVMF
build, then PlatformPei will not attempt to detect SMRAM at the default
SMBASE, at all. This is approach (4) -- the most flexible one, for
end-users -- from:
http://mid.mail-archive.com/868dcff2-ecaa-e1c6-f018-abe7087d640c@redhat.comhttps://edk2.groups.io/g/devel/message/48348
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200129214412.2361-12-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the DXE phase and later, it is possible for a module to dynamically
determine whether a CSM is enabled. An example can be seen in commit
855743f717 ("OvmfPkg: prevent 64-bit MMIO BAR degradation if there is no
CSM", 2016-05-25).
SEC and PEI phase modules cannot check the Legacy BIOS Protocol however.
For their sake, introduce a new feature PCD that simply reflects the
CSM_ENABLE build flag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200129214412.2361-11-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
During normal boot, when EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed
by platform BDS, the SMM IPL locks SMRAM (TSEG) through
EFI_SMM_ACCESS2_PROTOCOL.Lock(). See SmmIplReadyToLockEventNotify() in
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c".
During S3 resume, S3Resume2Pei locks SMRAM (TSEG) through
PEI_SMM_ACCESS_PPI.Lock(), before executing the boot script. See
S3ResumeExecuteBootScript() in
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume.c".
Those are precisely the places where the SMRAM at the default SMBASE
should be locked too. Add such an action to SmramAccessLock().
Notes:
- The SMRAM at the default SMBASE doesn't support the "closed and
unlocked" state (and so it can't be closed without locking it, and it
cannot be opened after closing it).
- The SMRAM at the default SMBASE isn't (and shouldn't) be exposed with
another EFI_SMRAM_DESCRIPTOR in the GetCapabilities() members of
EFI_SMM_ACCESS2_PROTOCOL / PEI_SMM_ACCESS_PPI. That's because the SMRAM
in question is not "general purpose"; it's only QEMU's solution to
protect the initial SMI handler from the OS, when a VCPU is hot-plugged.
Consequently, the state of the SMRAM at the default SMBASE is not
reflected in the "OpenState" / "LockState" fields of the protocol and
PPI.
- An alternative to extending SmramAccessLock() would be to register an
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL notify in SmmAccess2Dxe (for locking
at normal boot), and an EDKII_S3_SMM_INIT_DONE_GUID PPI notify in
SmmAccessPei (for locking at S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-10-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When OVMF runs in a SEV guest, the initial SMM Save State Map is
(1) allocated as EfiBootServicesData type memory in OvmfPkg/PlatformPei,
function AmdSevInitialize(), for preventing unintended information
sharing with the hypervisor;
(2) decrypted in AmdSevDxe;
(3) re-encrypted in OvmfPkg/Library/SmmCpuFeaturesLib, function
SmmCpuFeaturesSmmRelocationComplete(), which is called by
PiSmmCpuDxeSmm right after initial SMBASE relocation;
(4) released to DXE at the same location.
The SMRAM at the default SMBASE is a superset of the initial Save State
Map. The reserved memory allocation in InitializeRamRegions(), from the
previous patch, must override the allocating and freeing in (1) and (4),
respectively. (Note: the decrypting and re-encrypting in (2) and (3) are
unaffected.)
In AmdSevInitialize(), only assert the containment of the initial Save
State Map, in the larger area already allocated by InitializeRamRegions().
In SmmCpuFeaturesSmmRelocationComplete(), preserve the allocation of the
initial Save State Map into OS runtime, as part of the allocation done by
InitializeRamRegions(). Only assert containment.
These changes only affect the normal boot path (the UEFI memory map is
untouched during S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-9-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The 128KB SMRAM at the default SMBASE will be used for protecting the
initial SMI handler for hot-plugged VCPUs. After platform reset, the SMRAM
in question is open (and looks just like RAM). When BDS signals
EFI_DXE_MM_READY_TO_LOCK_PROTOCOL (and so TSEG is locked down), we're
going to lock the SMRAM at the default SMBASE too.
For this, we have to reserve said SMRAM area as early as possible, from
components in PEI, DXE, and OS runtime.
* QemuInitializeRam() currently produces a single resource descriptor HOB,
for exposing the system RAM available under 1GB. This occurs during both
normal boot and S3 resume identically (the latter only for the sake of
CpuMpPei borrowing low RAM for the AP startup vector).
But, the SMRAM at the default SMBASE falls in the middle of the current
system RAM HOB. Split the HOB, and cover the SMRAM with a reserved
memory HOB in the middle. CpuMpPei (via MpInitLib) skips reserved memory
HOBs.
* InitializeRamRegions() is responsible for producing memory allocation
HOBs, carving out parts of the resource descriptor HOBs produced in
QemuInitializeRam(). Allocate the above-introduced reserved memory
region in full, similarly to how we treat TSEG, so that DXE and the OS
avoid the locked SMRAM (black hole) in this area.
(Note that these allocations only occur on the normal boot path, as they
matter for the UEFI memory map, which cannot be changed during S3
resume.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-8-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The permanent PEI RAM that is published on the normal boot path starts
strictly above MEMFD_BASE_ADDRESS (8 MB -- see the FDF files), regardless
of whether PEI decompression will be necessary on S3 resume due to
SMM_REQUIRE. Therefore the normal boot permanent PEI RAM never overlaps
with the SMRAM at the default SMBASE (192 KB).
The S3 resume permanent PEI RAM is strictly above the normal boot one.
Therefore the no-overlap statement holds true on the S3 resume path as
well.
Assert the no-overlap condition commonly for both boot paths in
PublishPeiMemory().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Q35SmramAtDefaultSmbaseInitialization() function for
detecting the "SMRAM at default SMBASE" feature.
For now, the function is only a skeleton, so that we can gradually build
upon the result while the result is hard-coded as FALSE. The actual
detection will occur in a later patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Before adding another SMM-related, and therefore Q35-only, dynamically
detectable feature, extract the current board type check from
Q35TsegMbytesInitialization() to a standalone function.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In Intel datasheet 316966-002 (the "q35 spec"), Table 5-1 "DRAM Controller
Register Address Map (D0:F0)" leaves the byte register at config space
offset 0x9C unused.
On QEMU's Q35 board, for detecting the "SMRAM at default SMBASE" feature,
firmware is expected to write MCH_DEFAULT_SMBASE_QUERY (0xFF) to offset
MCH_DEFAULT_SMBASE_CTL (0x9C), and read back the register. If the value is
MCH_DEFAULT_SMBASE_IN_RAM (0x01), then the feature is available, and the
range mentioned below is open (accessible to code running outside of SMM).
Then, once firmware writes MCH_DEFAULT_SMBASE_LCK (0x02) to the register,
the MCH_DEFAULT_SMBASE_SIZE (128KB) range at 0x3_0000 (SMM_DEFAULT_SMBASE)
gets closed and locked down, and the register becomes read-only. The area
is reopened, and the register becomes read/write, at platform reset.
Add the above-listed macros to "Q35MchIch9.h".
(There are some other unused offsets in Table 5-1; for example we had
scavenged 0x50 for implementing the extended TSEG feature. 0x9C is the
first byte-wide register standing in isolation after 0x50.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In a subsequent patch, we'll introduce new DRAM controller macros in
"Q35MchIch9.h". Their names are too long for the currently available
vertical whitespace, so increase the latter first.
There is no functional change in this patch ("git show -b" displays
nothing).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
For supporting VCPU hotplug with SMM enabled/required, QEMU offers the
(dynamically detectable) feature called "SMRAM at default SMBASE". When
the feature is enabled, the firmware can lock down the 128 KB range
starting at the default SMBASE; that is, the [0x3_0000, 0x4_FFFF]
interval. The goal is to shield the very first SMI handler of the
hotplugged VCPU from OS influence.
Multiple modules in OVMF will have to inter-operate for locking down this
range. Introduce a dynamic PCD that will reflect the feature (to be
negotiated by PlatformPei), for coordination between drivers.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=2493
The BaseCryptLib was expanded to add the HkdfSha256ExtractAndExpand()
service in the following commit:
4b1b7c1913
When BaseCryptLibNull was added in the commit below, this new
service was not included.
d95de082da
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2494
When using structured PCDs, a C application is auto generated
to fill in the structured PCD value. The C application uses
the standard include files <stdio.h>, <stdlib.h>, and <string.h>.
This C application also supports include paths from package DEC
files when a structured PCD declaration provides a <Packages>
list. The complete list of include paths are -I options for
include paths from package DEC files and the compiler's standard
include paths.
-I include paths are higher priority than the standard include
paths. If the -I included paths from package DEC files contain
<stdio.h>, <stdlib.h>, or <string.h> the wrong include files are
used to compile the C application for the structured PCD value.
Update GenerateByteArrayValue() to skip a package DEC include
paths that contain <stdio.h>, <stdlib.h>, or <string.h>.
Build failures were observed when adding a structured PCD to
CryptoPkg. CryptoPkg contains <stdio.h>, <stdlib.h>, and
<string.h> in the path CryptoPkg/Library/Include to support
building Open SSL. The Library/Include path is listed as a
private include path in CryptoPkg.dec. Without this change, the
standard include files designed to support build OpenSLL are
used to build the structured PCD C application, and that build
fails.
Other packages that provide a standard C lib or a gasket for
a subset of the standard C lib will run into this same issue
if they also define and use a Structured PCD. So this issue
is not limited to the CryptoPkg.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2151
This commit introduces a Unified Hash API to calculate hash using a
hashing algorithm specified by the PCD, PcdHashApiLibPolicy. This library
interfaces with the various hashing API, such as, MD4, MD5, SHA1, SHA256,
SHA512 and SM3_256 implemented in BaseCryptLib. The user can calculate
the desired hash by setting PcdHashApiLibPolicy to appropriate value.
This feature is documented in the Bugzilla,
https://bugzilla.tianocore.org/show_bug.cgi?id=2151.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Amol N Sukerkar <amol.n.sukerkar@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2151
Added CryptoPkg Token Space GUID to be able to define PCDs.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Amol N Sukerkar <amol.n.sukerkar@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The "--function-context" ("-W") option of git-diff displays the entire
body of a modified function, not just small modified hunks within the
function. It is useful for reviewers when the code changes to the function
are small, but they could affect, or depend on, control flow that is far
away in the same function.
Of course, the size of the displayed context can be controlled with the
"-U" option anyway, but such fixed-size contexts are usually either too
small, or too large, in the above scenario.
It turns out that "--function-context" does not work correctly for C
source files in edk2. In particular, labels for the goto instruction
(which the edk2 coding style places in the leftmost column) appear to
terminate "--function-context".
The "git" utility contains built-in hunk header patterns for the C and C++
languages. However, they do not take effect in edk2 because we don't
explicitly assign the "cpp" git-diff driver to our C files. The
gitattributes(5) manual explains that this is required:
> There are a few built-in patterns to make this easier, and
> tex is one of them, so you do not have to write the above in
> your configuration file (you still need to enable this with
> the attribute mechanism, via .gitattributes). The following
> built in patterns are available:
>
> [...]
>
> * cpp suitable for source code in the C and C++
> languages.
The key statement is the one in parentheses.
Grab the suffix lists from the [C-Code-File] and [Acpi-Table-Code-File]
sections of "BaseTools/Conf/build_rule.template", add "*.h" and "*.H", and
mark those as belonging to the "cpp" git-diff driver.
This change has a dramatic effect on the following command, for example:
$ git show -W 2ef0c27cb8
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200120094245.9010-1-lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In DxeImageVerificationHandler(), we should return EFI_SECURITY_VIOLATION
for a rejected image only if the platform sets
DEFER_EXECUTE_ON_SECURITY_VIOLATION as the policy for the image's source.
Otherwise, EFI_ACCESS_DENIED must be returned.
Right now, EFI_SECURITY_VIOLATION is returned for all rejected images,
which is wrong -- it causes LoadImage() to hold on to rejected images (in
untrusted state), for further platform actions. However, if a platform
already set DENY_EXECUTE_ON_SECURITY_VIOLATION, the platform will not
expect the rejected image to stick around in memory (regardless of its
untrusted state).
Therefore, adhere to the platform policy in the return value of the
DxeImageVerificationHandler() function.
Furthermore, according to "32.4.2 Image Execution Information Table" in
the UEFI v2.8 spec, and considering that edk2 only supports (AuditMode==0)
at the moment:
> When AuditMode==0, if the image's signature is not found in the
> authorized database, or is found in the forbidden database, the image
> will not be started and instead, information about it will be placed in
> this table.
we have to store an EFI_IMAGE_EXECUTION_INFO record in both the "defer"
case and the "deny" case. Thus, the AddImageExeInfo() call is not being
made conditional on (Policy == DEFER_EXECUTE_ON_SECURITY_VIOLATION); the
documentation is updated instead.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Fixes: 5db28a6753
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-12-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
It makes no sense to call AddImageExeInfo() with (Signature == NULL) and
(SignatureSize > 0). AddImageExeInfo() does not crash in such a case -- it
avoids the CopyMem() call --, but it creates an invalid
EFI_IMAGE_EXECUTION_INFO record. Namely, the
"EFI_IMAGE_EXECUTION_INFO.InfoSize" field includes "SignatureSize", but
the actual signature bytes are not filled in.
Document and ASSERT() this condition in AddImageExeInfo().
In DxeImageVerificationHandler(), zero out "SignatureListSize" if we set
"SignatureList" to NULL due to AllocateZeroPool() failure.
(Another approach could be to avoid calling AddImageExeInfo() completely,
in case AllocateZeroPool() fails. Unfortunately, the UEFI v2.8 spec does
not seem to state clearly whether a signature is mandatory in
EFI_IMAGE_EXECUTION_INFO, if the "Action" field is
EFI_IMAGE_EXECUTION_AUTH_SIG_FAILED or EFI_IMAGE_EXECUTION_AUTH_SIG_FOUND.
For now, the EFI_IMAGE_EXECUTION_INFO addition logic is not changed; we
only make sure that the record we add is not malformed.)
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-11-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
"FileBuffer" is a non-optional input (pointer) parameter to
DxeImageVerificationHandler(). Normally, when an edk2 function receives a
NULL argument for such a parameter, we return EFI_INVALID_PARAMETER or
RETURN_INVALID_PARAMETER. However, those don't conform to the
SECURITY2_FILE_AUTHENTICATION_HANDLER prototype.
Return EFI_ACCESS_DENIED when "FileBuffer" is NULL; it means that no image
has been loaded.
This patch does not change the control flow in the function, it only
changes the "Status" outcome from API-incompatible error codes to
EFI_ACCESS_DENIED, under some circumstances.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Fixes: 570b3d1a72
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-10-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
The "Status" variable is set to EFI_ACCESS_DENIED at the top of the
function. Then it is overwritten with EFI_SECURITY_VIOLATION under the
"Failed" (earlier: "Done") label. We finally return "Status".
The above covers the complete usage of "Status" in
DxeImageVerificationHandler(). Remove the variable, and simply return
EFI_SECURITY_VIOLATION in the end.
This patch is a no-op, regarding behavior.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-9-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
Michael D Kinney
Bret Barkelew
Hao A Wu
Siyuan Fu
Zhichao Gao
Sean Brogan
Steven
Liming Gao
Ashish Singhal
Pierre Gondois
Philippe Mathieu-Daude
Liu, Zhiguang
Heng Luo
Laszlo Ersek
Amol N Sukerkar