Commit Graph

4887 Commits

Author SHA1 Message Date
Star Zeng aa57c0f096 MdeModulePkg PeiCore: More debug messages for pre-memory allocations
The debug messages can help developer to know the pre-memory
allocation usage.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-30 09:29:44 +08:00
Hao Wu 27daa8658e MdeModulePkg/AtaAtapiPassThru: Fix possible out of range left shift
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=699

Within function AhciModeInitialization(), left shift operations of 'BIT0'
in the following statements:
"if ((PortImplementBitMap & (BIT0 << Port)) != 0) {"

will incur possible out of range left shift when Port is 31, since
"1 << 31" is possible to exceed the range of type 'int' (signed).

According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
>   bits are filled with zeros. If E1 has an unsigned type, the value
>   of the result is E1 * 2^E2 , reduced modulo one more than the
>   maximum value representable in the result type. If E1 has a signed
>   type and nonnegative value, and E1 * 2^E2 is representable in the
>   result type, then that is the resulting value; otherwise, the
>   behavior is undefined.

This commit explicitly cast 'BIT0' with UINT32 to resolve this issue.

Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-29 16:14:17 +08:00
Hao Wu bd42d976d5 MdeModulePkg/DxeNetLib: Fix negative value left shift
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=698

Within function NetRandomInitSeed(), left shift a negative value is used
in:
"~Time.Hour << 24"

which involves undefined behavior.

Since Time.Hour is of type UINT8 (range from 0 to 23), hence ~Time.Hour
will be a negative value (of type int, signed).

According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
>   bits are filled with zeros. If E1 has an unsigned type, the value
>   of the result is E1 * 2^E2 , reduced modulo one more than the
>   maximum value representable in the result type. If E1 has a signed
>   type and nonnegative value, and E1 * 2^E2 is representable in the
>   result type, then that is the resulting value; otherwise, the
>   behavior is undefined.

This commit will remove the '~' operator before 'Time.Hour', since it
seems like an implementation choice for generating the seed.

Cc: Steven Shi <steven.shi@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-09-29 16:14:17 +08:00
Hao Wu d9be0f66ff MdeModulePkg/Tpl: Fix negative value left shift
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=695

Within function CoreRestoreTpl(), left shift a negative value -2 is used
in:
"while (((-2 << NewTpl) & gEventPending) != 0) {"

which involves undefined behavior.

According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
>   bits are filled with zeros. If E1 has an unsigned type, the value
>   of the result is E1 * 2^E2 , reduced modulo one more than the
>   maximum value representable in the result type. If E1 has a signed
>   type and nonnegative value, and E1 * 2^E2 is representable in the
>   result type, then that is the resulting value; otherwise, the
>   behavior is undefined.

This commit refines the code logic to avoid left shifting the negative
value.

Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-29 16:14:17 +08:00
Hao Wu 1dfb0bf20e MdeModulePkg/PrintLib: Fix possible negative value left shift
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702

Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"

which involves undefined behavior.

Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.

According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
>   bits are filled with zeros. If E1 has an unsigned type, the value
>   of the result is E1 * 2^E2 , reduced modulo one more than the
>   maximum value representable in the result type. If E1 has a signed
>   type and nonnegative value, and E1 * 2^E2 is representable in the
>   result type, then that is the resulting value; otherwise, the
>   behavior is undefined.

This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.

Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-29 16:14:17 +08:00
Ruiyu Ni 0e6584e386 MdeModulePkg/BdsDxe: Don't delete "BootNext" until booting it
Current implementation deletes the "BootNext" before calling
any PlatformBootManagerLib APIs, but if system resets in
PlatformBootManagerLib APIs, "BootNext" is not consumed but lost.

The patch defers the deletion of "BootNext" to before booting it.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
2017-09-29 15:23:15 +08:00
Fu Siyuan b07bbb4f73 MdeModulePkg/DxeNetLib: Check the actual packet size before trim data from Nbuf.
In NetbufTrim() function, the NetBuf TotalSize should be checked with 0 before
making the trim operation, otherwise the function will fall into infinite loop.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2017-09-28 15:36:49 +08:00
Ruiyu Ni 5db417ed25 MdeModulePkg/PciBusDxe: Enable Bus Master on P2P bridges on demand
The patch dynamically enables Bus Master on P2P bridges only
when requested by a device driver through PciIo.Attribute() to enable
the Bus Master.

Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
2017-09-28 12:54:53 +08:00
Hao Wu ce9aaba64e MdeModulePkg/UdfDxe: Resolve potential NULL pointer dereference
Within function GetAllocationDescriptorLsn():

The call to GetPdFromLongAd() may return NULL and it will be later
dereferenced in GetShortAdLsn().

This commit adds ASSERT to resolve the potential NULL pointer
dereference.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
2017-09-27 19:09:25 +08:00
Star Zeng e411f8ca38 MdeModulePkg Core: Support FFS_ATTRIB_DATA_ALIGNMENT_2
Follow PI 1.6 spec to support FFS_ATTRIB_DATA_ALIGNMENT_2 for
FFS alignment extended to support maximum 16MB.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-26 18:01:03 +08:00
Hao Wu 8932679df5 MdeModulePkg/DxeCore: Add check to ensure no possible NULL ptr deref
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-26 09:38:46 +08:00
Paulo Alcantara baaa3cee1e MdeModulePkg/UDF: Fix creation of UDF logical partition
Do not reserve entire block device size for an UDF file system -
instead, reserve the appropriate space (UDF logical volume space) for
it.

Additionally, only create a logical partition for UDF logical volumes
that are currently supported by EDK2 UDF file system implementation. For
instance, an UDF volume with a single LVD and a single Physical (Type 1)
Partition will be supported.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-09-25 15:36:27 +08:00
Dandan Bi 66918edd34 MdeModulePkg/SetupBrowser:Add NULL check before using a pointer
Add NULL pointer check before using a pointer to avoid possible
NULL pointer dereference.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
2017-09-22 14:58:41 +08:00
Amit Kumar 89f7f2cdf0 MdeModulePkg/DxeCore: Fixed Interface returned by CoreOpenProtocol
Change since v4: Revise the patch based on V4 sent by Amit Kumar
1) Only return the corresponding protocol interface in *Interface
if the return status is EFI_SUCCESS or EFI_ALREADY_STARTED.
2) Interface is returned unmodified for all error conditions except
EFI_UNSUPPORTED and EFI_ALREADY_STARTED, NULL will be returned in
*Interface when EFI_UNSUPPORTED and Attributes is not
EFI_OPEN_PROTOCOL_TEST_PROTOCOL, the protocol interface will be
returned in *Interface when EFI_ALREADY_STARTED.

Change since v3:
1) Fixed issue when Attributes = EFI_OPEN_PROTOCOL_TEST_PROTOCOL
and Inteface = NULL case. [Reported by:star.zeng at intel.com]

Change Since v2:
1) Modified to use EFI_ERROR to get status code

Change since v1:
1) Fixed typo protocal to protocol
2) Fixed coding style

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Amit Kumar <amit.ak@samsung.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Gabriel Somlo <gsomlo@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Amit Kumar <amit.ak@samsung.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
2017-09-22 10:02:53 +08:00
Dandan Bi 560a435df0 MdeModulePkg/SetupBrowser: Handle questions with Bit VarStore
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545

For oneof/numeric/CheckBox(storage can be Bit VarStore)
If the question value can be updated and shown correctly
in UI page, we need do enhancements in following cases:
1. Parse the Ifr data to get the bit VarStore info correctly.
2. Set/get value to/from bit VarStore correctly.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-21 16:17:42 +08:00
Dandan Bi 37cd16ac57 MdeModulePkg/HiiDatabase: Handle questions with Bit VarStore
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545

For oneof/numeric/checkbox, their storage may be bit field.
When generating <ConfigAltResp> string to get default value
for these questions, we need to parse the Ifr data to get
the bit Varstore info,and then generating the correct
<ConfigAltResp> string.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-21 16:17:42 +08:00
Dandan Bi 95a7135191 MdeModulePkg/UefiHiiLib: Validate question with bit fields
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545

In UefiHiiLib, there are codes to validate the current setting of
questions, now update the logic to handle question with bit storage.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-21 16:17:41 +08:00
Dandan Bi 01723271a8 MdeModulePkg: Add GUID/flags to implement BitField support
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=545

Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2017-09-21 16:17:41 +08:00
Jian J Wang 14dde9e903 MdeModulePkg/Core: Fix out-of-sync issue in GCD
From GCD perspective, its SetMemorySpaceAttributes() method doesn't accept page
related attributes. That means users cannot use it to change page attributes,
and have to turn to CPU arch protocol to do it, which is not be allowed by PI
spec.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-21 09:38:27 +08:00
Hao Wu 880ec68338 MdeModulePkg/UdfDxe: Refine enum member naming style
Similar to the naming style for variables, it's better for the name of
members in a enum type to avoid using only upper-case letters.

Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:44:05 +08:00
Hao Wu 3f92b10493 MdeModulePkg/Udf: Avoid declaring and initializing local GUID variable
The local GUID variable 'UdfDevPathGuid', it has been initialized during
its declaration.

For better coding style, this commit uses a global variable instead.

Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:44:03 +08:00
Hao Wu 32492fee2d MdeModulePkg/UdfDxe: Avoid short (single character) variable name
In ResolveSymlink(), replace the following variable:
CHAR16              *C;

with:
CHAR16              *Char;

Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:44:00 +08:00
Hao Wu 077f8c4372 MdeModulePkg/Udf: Refine function description comments
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:43:58 +08:00
Hao Wu 12b83f5664 MdeModulePkg/UdfDxe: Use compare operator for non-boolean comparisons
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:43:55 +08:00
Hao Wu fedec0a38e MdeModulePkg/UdfDxe: Fix operands of different size in bitwise OP
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:43:53 +08:00
Hao Wu 3fa40d588a MdeModulePkg/UdfDxe: Add checks to ensure no possible NULL ptr deref
Case 1 - Within DuplicateFid() & DuplicateFe():
The call to AllocateCopyPool() may return NULL.
Add ASSERTs as checks.

Case 2 - Within UdfRead():
Add ASSERT to ensure 'NewFileEntryData' returned from FindFileEntry()
will not be NULL pointer.

Case 3 - Within GetAllocationDescriptorLsn():
The return value of 'GetPdFromLongAd (Volume, ParentIcb)' may be NULL,
and it will be passed into function GetShortAdLsn() which will
dereference it.
Add ASSERT in GetShortAdLsn() as check.

Case 4 - Within ReadFile():
Add ASSERT to ensure 'Data' returned from GetAedAdsData() will not be NULL
pointer.

Case 5 - Within InternalFindFile():
If both 'Parent->FileIdentifierDesc' and 'Icb' are NULL, then possible
NULL pointer dereference will happen in ReadDirectoryEntry().
Add additional check to resolve.

Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 12:43:50 +08:00
Pankaj Bansal 91cc526b15 MdeModulePkg/SerialDxe: Fix not able to change serial attributes
Issue : When try to change serial attributes using sermode
command, the default values are set with the execute flow
as below.

The sermode command calls SerialSetAttributes, which sets H/W
attributes of Serial device. After that the SerialIo protocol is
reinstalled, which causes MdeModulePkg/Universal/Console/TerminalDxe
and MdeModulePkg/Universal/Console/ConPlatformDxe drivers' bindings
to stop and then start. This in turn calls SerialReset, which undoes
changes of SerialSetAttributes.

Cause : The SerialReset command resets the attributes' values
to default.
Fix : Serial Reset command should set the attributes which have
been changed by user after calling SerialSetAttributes.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-19 11:02:56 +08:00
Star Zeng 7f2f96f1a8 MdeModulePkg SmbiosMeasurementDxe: Skip measurement for OEM type
The generic driver has no way to know whether an OEM type should
be filtered or not.
This patch is to update the code to skip measurement for OEM type
and platform code can measure it by self if required.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
2017-09-18 10:19:40 +08:00
Jiewen Yao b575ca32c8 MdeModulePkg/XhciPei: Support IoMmu.
Update XHCI driver to consume IOMMU_PPI to allocate DMA buffer.

If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.

This is a compatible change.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-16 09:18:16 +08:00
Jiewen Yao 915a3a82e0 MdeModulePkg/Dec: Add IOMMU_PPI GUID.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-16 09:17:57 +08:00
Jiewen Yao 2b620ee1ff MdeModulePkg/Include: Add IOMMU_PPI.
This IOMMU_PPI is to provide IOMMU abstraction in PEI.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-16 09:17:55 +08:00
Paulo Alcantara 11b4463e09 MdeModulePkg/UdfDxe: Fix NULL pointer dereference
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=704

For root directory, the FID (File Identifier Descriptor) pointer is
accessible through PRIVATE_UDF_FILE_DATA.Root, whereas non-root
directory and regular files, their FIDs are accessible through
PRIVATE_UDF_FILE_DATA.File.

In UdfSetPosition(), the FID was retrieved through
PRIVATE_UDF_FILE_DATA.File, hence when calling it with a root directory,
PRIVATE_UDF_FILE_DATA.File.FileIdentifierDescriptor would be NULL and
then dereferenced.

This patch fixes the NULL pointer dereference by calling _FILE() to
transparently return the correct UDF_FILE_INFO * which points to a valid
FID descriptor of a specific file.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-15 09:38:05 +08:00
Star Zeng 54537008a2 MdeModulePkg UdfDxe: Fix VS2010/VS2012 build failure
VS2010/VS2012 build failure with below info:
warning C4701:
  potentially uninitialized local variable 'DataOffset' used
  potentially uninitialized local variable 'FilePosition' used
  potentially uninitialized local variable 'FinishedSeeking' used
  potentially uninitialized local variable 'Data' used
warning C4703:
  potentially uninitialized local pointer variable 'Data' used

In fact, DataOffset, FilePosition and FinishedSeeking are initialized
and then used if (ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ).
DoFreeAed will be set to TRUE when Data is allocated and returned from
GetAedAdsData(), and Data will be freed if (DoFreeAed) when exiting.

Use same method at 5afa5b8159 to fix
the build failure.

There is related discussion at
https://lists.01.org/pipermail/edk2-devel/2017-September/014641.html

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
2017-09-15 09:26:24 +08:00
Laszlo Ersek 5afa5b8159 MdeModulePkg/UdfDxe: suppress incorrect compiler warning in ReadFile()
When building the driver for DEBUG/RELEASE, GCC48/GCC49 warn about
ReadFile() possibly using "BytesLeft" without initializing it first.

This is not the case. The reads of "BytesLeft" are only reachable if
(ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ). But, in that case, we
also set "BytesLeft" to "ReadFileInfo->FileDataSize", near the top of the
function.

Assign "BytesLeft" zero at the top, and add a comment that conforms to the
pending Coding Style Spec feature request at
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.

This issue was reported by Ard's and Gerd's CI systems independently.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
2017-09-14 00:05:20 +02:00
Laszlo Ersek 998aee899e MdeModulePkg/UdfDxe: reject reserved values in ICB.Flags[2:0]
The ECMA-167 standard (3rd Edition, June 1997) reserves values 4 through 7
in the ICB.Flags[2:0] bit-field for future standardization; see "14.6 ICB
Tag" / "14.6.8 Flags (RBP 18)".

https://www.ecma-international.org/publications/standards/Ecma-167.htm

The

  switch (RecordingFlags)

statement in the ReadFile() function handles all the standard values,
using the constants of the UDF_FE_RECORDING_FLAGS enum type. However, the
reserved values are not caught with a "default" case label, which both
breaks the edk2 Coding Style Spec, and leaves the Status variable
un-initialized, before we return Status under the Done label.

Set Status to EFI_UNSUPPORTED if we encounter a reserved value.

This issue was reported by Ard's and Gerd's CI systems independently
(through build failures with GCC48/GCC49, DEBUG/RELEASE targets).

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
2017-09-14 00:05:06 +02:00
Bi, Dandan c3246da7bf MdeModulePkg: Add UdfDxe to the dsc file
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-13 18:24:40 +08:00
Liming Gao 5f56b0ff24 MdeModulePkg: Update PiDxeS3BootScriptLib Internal function name
To avoid the function name conflict, update the internal function name
to be the specific one.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-13 15:02:08 +08:00
Paulo Alcantara 35aec96c22 MdeModulePkg/UdfDxe: Remove negative comparison of unsigned number
This patch gets rid of a negative comparison of an UINT64 type (Offset)
as it'll never evaluate to true.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-13 14:28:21 +08:00
Laszlo Ersek b4e5807d24 MdeModulePkg/PartitionDxe: remove always false comparison
In the expression

  (RemainderByMediaBlockSize != 0 ||
   Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE)

the second expression is only evaluated if the first expression is false.

If the first expression is false, i.e.,

  RemainderByMediaBlockSize == 0

then UDF_LOGICAL_SECTOR_SIZE is a whole multiple of "Media->BlockSize",
which implies

  UDF_LOGICAL_SECTOR_SIZE >= Media->BlockSize.

Therefore whenever

  Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE

is evaluated, it is false.

The expression

  ((expression) || FALSE)

is equivalent to

  (expression).

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-12 12:12:31 +02:00
Laszlo Ersek b19aeeb91e MdeModulePkg/PartitionDxe: don't divide 64-bit values with C operators
In edk2, the division and shifting of 64-bit values are forbidden with
C-language operators, because the compiler may generate intrinsic calls
for them.

For example, clang-3.8 emits a call to "__umoddi3" for

  UDF_LOGICAL_SECTOR_SIZE % Media->BlockSize

in PartitionInstallUdfChildHandles(), if PartitionDxe is built for IA32,
which then fails to link.

UDF_LOGICAL_SECTOR_SIZE has type UINT64, while
EFI_BLOCK_IO_MEDIA.BlockSize has type UINT32(). Replace the % operator
with a DivU64x32Remainder() call.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-12 12:12:29 +02:00
Laszlo Ersek eb928b17c5 MdeModulePkg/UdfDxe: replace zero-init of local variables with ZeroMem()
In edk2, initialization of local variables is forbidden, both for
stylistic reasons and because such initialization may generate calls to
compiler intrinsics.

For the following initialization in UdfRead():

  CHAR16                          FileName[UDF_FILENAME_LENGTH] = { 0 };

clang-3.8 generates a memset() call, when building UdfDxe for IA32, which
then fails to link.

Replace the initialization with ZeroMem().

Do the same to "FilePath" in UdfOpen().

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-12 12:12:26 +02:00
Laszlo Ersek 131fd40ffc MdeModulePkg/UdfDxe: don't return unset Status if INLINE_DATA req succeeds
Ard reports that clang-3.8 correctly flags the following issue in the
ReadFile() function:

If "RecordingFlags" is INLINE_DATA, then there are three paths through the
code where we mean to return success, but forget to set Status
accordingly:

(1) when "ReadFileInfo->Flags" is READ_FILE_GET_FILESIZE, or

(2) when "ReadFileInfo->Flags" is READ_FILE_ALLOCATE_AND_READ and
    AllocatePool() succeeds, or

(3) when "ReadFileInfo->Flags" is READ_FILE_SEEK_AND_READ.

Set "Status" to EFI_SUCCESS when we are done processing the INLINE_DATA
request, i.e., when we reach the corresponding "break" statament under the
INLINE_DATA case label.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-12 12:12:24 +02:00
Laszlo Ersek a3240c63ec MdeModulePkg/UdfDxe: ASSERT() valid ReadFileInfo Flags for INLINE_DATA req
In the ReadFile() function, if "RecordingFlags" is INLINE_DATA, then we
cover the following values of "ReadFileInfo->Flags":

- READ_FILE_GET_FILESIZE
- READ_FILE_ALLOCATE_AND_READ
- READ_FILE_SEEK_AND_READ

We don't do anything (just proceed to the end of the function) if
"ReadFileInfo->Flags" is anything else.

In reality the above three values cover the domain of the
UDF_READ_FILE_FLAGS enum type fully, and "ReadFileInfo->Flags" is only
ever set internally to UdfDxe. Therefore any other flag value would be a
bug in UdfDxe.

ASSERT() specifically that "ReadFileInfo->Flags" has been set correctly,
so that the reader is not left wondering what happens if none of the enum
constants match.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-12 12:12:18 +02:00
Dandan Bi c05cae55eb MdeModulePkg/PartitionDxe: Initialize the array after declaration
Initialize the array DescriptorLBAs[] after declaration to fix
non-constant aggregate initializer warning in VS tool chains.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-12 17:22:07 +08:00
Bi, Dandan b434f75327 MdeModulePkg/UdfDxe: Initialize the array after declaration
Initialize the array DescriptorLBAs[] after declaration to fix
non-constant aggregate initializer warning in VS tool chains.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-12 17:22:06 +08:00
Bi, Dandan 0b4c8f003a MdeModulePkg/UdfDxe: Add type cast to fix build failure in VS tools
V3: Remove one unnecessay type cast in patch 1.
Codes:
if (FilePosition + ExtentLength > ReadFileInfo->FilePosition) {
  Offset = ReadFileInfo->FilePosition - FilePosition;
  if (Offset < 0) {
    Offset = -(Offset)
  }
...
}
Offset is UINT64 can not < 0, so the code logic may have some issue.
and Offset = -(Offset) may build failure in some circumstance.
Previously type cast Offset to INT64 to fix build break. Now remove
the type cast. Then can to check the code logic later.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-12 17:22:05 +08:00
Laszlo Ersek 1dac45f530 MdeModulePkg/UsbBusDxe: log warning message at DEBUG_WARN level
"UsbSelectConfig: failed to connect driver %r, ignored" is an error
message, but it states at once that the error condition will not affect
the control flow. Degrade the report to DEBUG_WARN.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-09-11 22:38:59 +02:00
Star Zeng 2f6ef874ac MdeModulePkg Xhci: Correct description of Timeout param in XhciReg.h
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=653

Correct description of Timeout param in XhciReg.h to be matched with
XhciReg.c.

Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-09-11 09:20:44 +08:00
Paulo Alcantara 99c9b94905 MdeModulePkg: Initial UDF/ECMA-167 file system support
This patch introduces UDF file system support in EDK2. All block devices
that support BlockIo and DiskIo protocols and contain a valid UDF file
system - as specified by OSTA Universal Disk Format (revisions 1.02
through 2.60) - will be installed EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to
provide access to underlying file system.

File system operations on regular, directory and symlink files are
supported.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-09-08 20:42:49 +02:00
Paulo Alcantara 8aafec2c13 MdeModulePkg/PartitionDxe: Add UDF file system support
Scan for UDF file systems on all block devices, as specified by OSTA
Universal Disk Format Specification 2.60, and install a Vendor-Defined
Media Device Path for each file system found.

The Vendor-Defined Media Device Path for the UDF file system is then
checked by UdfDxe to decide whether or not start the driver.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-09-08 20:42:47 +02:00