PCI_REG_PCIE_SLOT_CONTROL contains a typo. It is defined as:
typedef union {
struct {
UINT32 AttentionButtonPressed : 1;
UINT32 ...
...
} Bits;
UINT16 Uint16;
} PCI_REG_PCIE_SLOT_CONTROL;
The bit field data type should be UINT16 instead of UINT32,
results sizeof (PCI_REG_PCIE_SLOT_CONTROL) equals to 4 instead of 2.
Because this structure is used in PCI_CAPABILITY_PCIEXP as below:
typedef struct {
...
PCI_REG_PCIE_SLOT_CONTROL SlotControl;
PCI_REG_PCIE_SLOT_STATUS SlotStatus;
} PCI_CAPABILITY_PCIEXP;
It cause the OFFSET_OF (PCI_CAPABILITY_PCIEXP, SlotStatus) equal
to a wrong value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated. Also update
some function descriptors accordingly.
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Add the comments to address security problems in the Pkcs7Verify Protocol
per UEFI 2.7 updates.
The Pkcs7Verifier function VerifySignature() has problematic use cases
where it might be used to unwittingly bypass security checks. The specific
problem is that if the supplied hash is a different algorithm from the
blacklist hash, the hash will be approved even if it should have been
denied. The added comments place a strong warning about the problem.
It is possible to use the protocol reliably, either by agreeing a hash to
use for all time (like sha256) or by looping over all supported hashes when
using the protocol.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Add BuildFv3Hob API in HobLib.h and implement the API
in HobLib instances PeiHobLib, DxeHobLib and DxeCoreHobLib.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
CalculateCrc32() bases on the initialized mCrcTable. When CalculateCrc32()
is used, mCrcTable will take 1KB size in the image. When CalculateCrc32()
is not used, mCrcTable will not be built in the image, and no size impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Revision 2.2 of the PCI Spec defines Capability IDs 0 through 6,
inclusive, in Appendix H. It reserves IDs 7 through 255.
Revision 2.3 of the PCI Spec adds Capability IDs 7 through 0xC, inclusive,
in Appendix H. Capability ID 9 stands for "Vendor Specific".
Add the EFI_PCI_CAPABILITY_ID_VENDOR macro and the
EFI_PCI_CAPABILITY_VENDOR_HDR structure type to MdePkg/IndustryStandard,
in order to describe this capability header.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Follow PI 1.6 spec to add FFS_ATTRIB_DATA_ALIGNMENT_2 definition for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds a few more UDF volume structures in order to detect an
UDF file system which is supported by current EDK2 UDF file system
implementation in Partition driver.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch adds basic volume structure definitions necessary to identify
a valid UDF file system on a block device, as specified by OSTA
Universal Disk Format Specification 2.60.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Follow PI 1.6 spec to add FreePages definition and comments for
AllocatePages that will support pre permanent memory page allocation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In PI 1.5 version, system management mode name(SMM) has been changed
to Management Mode(MM). It impacts the current code which still use
SMM/Smram/SMI keywords. This patch update the original files which
related to old SMM modules, also keep the compatible with old SMM
related drivers.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In PI 1.5 version, system management mode name(SMM) has been changed
to Management Mode(MM). It impacts the current code which still use
SMM/Smram/SMI keywords. This patch add new definition which use
MM/MmRam/MMI keywords to follow new spec definitions.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds the new library class S3PciSegmentLib to carry out
PCI configuration and enable the PCI operations to be replayed during
an S3 resume. This library class maps directly on top of the
PciSegmentLib class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds PciSegmentInfoLib library class which is used
by PciSegmentLib (commit in next patch) to support multiple
segment PCI configuration access.
BasePciSegmentInfoLibNull instance is added but it shouldn't be
used by any real platform.
Any single segment platform that wants to use PciSegmentLib could
use BasePciSegmentLibPci instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds new macro PCI_ECAM_ADDRESS into PciExpress21.h,
to align to the PCIE spec, and also update PciExpressLib.h to
redirect PCI_EXPRESS_LIB_ADDRESS to the new macro.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add definitions for HII Popup Protocol according to UEFI2.7.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds IsNodeInList() to BaseLib, which verifies the given
Node is part of the doubly-linked List provided.
V2:
- Rename "List" to "FirstEntry" and "Node" to "SecondEntry" to clarify that
"FirstEntry" does not need to be the doubly-linked list's head node.
V3:
- Remove ASSERTs from IsNodeInList() which are present in
InternalBaseLibIsListValid().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds the DNS device path node definition.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Update the comments of Ip4Config2/Ip6Config Protocol to consistent
with UEFI Spec 2.7, which provides the capability to clear specific
individual data types.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This PPI is introduced in PI Version 1.5.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EFI_FTP4_DATA_CALLBACK is a function pointer and defined as follows:
> typedef
> EFI_STATUS
> (EFIAPI *EFI_FTP4_DATA_CALLBACK)(
> IN EFI_FTP4_PROTOCOL *This,
> IN EFI_FTP4_COMMAND_TOKEN *Token
> );
And EFI_FTP4_COMMAND_TOKEN structure declared it as:
> EFI_FTP4_DATA_CALLBACK *DataCallback
Which ended up being a pointer to function pointer and clearly wrong.
This patch fixes it by removing the misleading '*' from declaration.
It's also fixed in new UEFI 2.7 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to follow latest (>= 1.5) PI spec to add description
for notification PPI from SEC
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Delete PiSmmCommunicationAcpiTable.h and delete SMM Communication ACPI
Table definition in UefiAcpiDataTable.h.
As EFI_SMM_COMMUNICATE_HEADER is defined in both PI spec vol 4
and UEFI spec, move its definition to SmmCommunication.h.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
UEFI Spec uses UnRegisterResetNotify in protocol structure
definition but uses UnregisterResetNotify in the function
prototype definition.
By searching the entire spec, Unregister* is used for
SIMPLE_TEXT_INPUT_EX_PROTOCOL.UnregisterKeyNotify(). So choose
to use UnregisterResetNotify for consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
UEFI spec 2.6 errata B update Status Codes Returned table of the
EFI_USBFN_IO_PROTOCOL.GetDeviceInfo function as follows:
1. Update EFI_INVALID_PARAMETER description:
Original text:
A parameter is invalid.
New text:
One or more of the following conditions is TRUE:
BufferSize is NULL.
*BufferSize is not 0 and Buffer is NULL.
Id in invalid.
2. Update EFI_BUFFER_TOO_SMALL description:
Original text:
Supplied buffer isn’t large enough to hold the request string.
New text:
The buffer is too small to hold the buffer.
*BufferSize has been updated with the size needed to hold the
request string.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The definition for 1.1a has no difference with 1.0.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This updates the IORT header to include the definitions that were added
in revision C of the IORT spec that was made public recently.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update comments for GetNextVariableName to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to new PI spec, add new Status Code to indicate BDS starts
attempting booting from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
This commit updates the Firmware Error Record related definitions
according to UEFI 2.7 spec Section N.2.10 Table 281:
a. Adds definitions for 2 Firmware Error Record types
b. Update the structure EFI_FIRMWARE_ERROR_DATA
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
update Base.h in MdePkg to check the _MSC_VER and define
GLOBAL_REMOVE_IF_UNREFERENCED to nothing for VS2013 and higher tool
chain tags.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the definition.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is used to update supplicant.h and wifi2.h
to meet UEFI 2.7 definition. Add EfiSupplicant80211PMK
field in EFI_SUPPLICANT_DATA_TYPE and change **NetworkDesc
to NetworkDesc[1] in EFI_80211_GET_NETWORKS_RESULT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
UEFI Spec 2.7 introduces BluetoothAttribute and BluetoothLeConfig
protocols. The patch adds the definitions for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
UEFI spec 2.7 adds new EFI_BLUETOOTH_CONFIG_DATA_TYPE types.
The patch adds them to the header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This SmmIoLib is used to check if an IO resource
is valid in SMM.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This adds #defines and struct typedefs for the various node types in
the ACPI 6.0 IO Remapping Table (IORT).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <yiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
This new API only works on DEBUG build. It will search the PE/COFF image base
forward the input address in this PE/COFF image and returns it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
All the Shell 2.2 features are implemented except DMEM/MM
changes which are pending on spec change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Kinney D Michael <kinney.d.michael@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The reason is that we observe that a platform may use same Handler
for different context.
In order to support Unregister such handler, we have to input
context information as well.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The commit refines the comment description for PrintLib API
AsciiValueToStringS.
This API will not ASSERT when the input/output parameter 'Buffer' is not
aligned on a 16-bit boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The UEFI spec differs between architectures in the minimum alignment
and granularity of page allocations that are visible to the OS as
EFI_MEMORY_RUNTIME regions.
So define macros that carry these values to the respective ProcessorBind.h
header files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds 4 APIs to convert ASCII string to GUID, bytes
buffer, IP v4 address and IP v6 address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
The patch adds 4 APIs to convert Unicode string to GUID, bytes
buffer, IP v4 address and IP v6 address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Since the following patch needs to add API converting string
to IP address in BaseLib, define the IP address as base types
in Base.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This library should be linked by SmmChildDispatch to
report the hardware SMI handler maintained by SmmChildDispatch.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the following 2 APIs:
UnicodeValueToStringS
AsciiValueToStringS
These safe version APIs are used to enhance their counterpart (APIs
without trailing 'S' in function names).
They perform checks to the input parameters and will return relative
status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the following 12 APIs in MdePkg/BasePrintLib:
UnicodeVSPrint
UnicodeBSPrint
UnicodeSPrint
UnicodeVSPrintAsciiFormat
UnicodeBSPrintAsciiFormat
UnicodeSPrintAsciiFormat
AsciiVSPrint
AsciiBSPrint
AsciiSPrint
AsciiVSPrintUnicodeFormat
AsciiBSPrintUnicodeFormat
AsciiSPrintUnicodeFormat
They will ASSERT when:
1) The input parameter 'StartOfBuffer' is NULL if 'BufferSize' indicates
at least 1 Ascii/Unicode character can be held.
2) The input parameter 'FormatString' is NULL if 'BufferSize' indicates at
least 1 Ascii/Unicode character can be held.
3) The input parameter 'FormatString' contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
4) The produced string contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
This commits removes the ASSERT case 4) and add the following new ASSERT
case:
4) The input parameter 'BufferSize' is greater than
(PcdMaximumAsciiStringLength * sizeof (CHAR8)) for Ascii format string or
(PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for Unicode format
string.
And for those ASSERT cases, 0 will be returned by those 12 APIs.
For the following 2 APIs in MdePkg/BasePrintLib:
SPrintLength
SPrintLengthAsciiFormat
They will ASSERT when:
1) The input parameter 'FormatString' is NULL.
2) The input parameter 'FormatString' contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
And for those ASSERT cases, 0 will be returned by those 2 APIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=363
The definition name for ACPI IO Remapping Table signature is incorrect
in Acpi60.h and Acpi61.h as below:
EFI_ACPI_6_0_INTERRUPT_SOURCE_OVERRIDE_SIGNATURE
EFI_ACPI_6_1_INTERRUPT_SOURCE_OVERRIDE_SIGNATURE
The name should be changed to
EFI_ACPI_6_0_IO_REMAPPING_TABLE_SIGNATURE
EFI_ACPI_6_1_IO_REMAPPING_TABLE_SIGNATURE
The comments
///
/// "IORT" Interrupt Source Override
///
will be also changed to
///
/// "IORT" I/O Remapping Table
///
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
DEVICE_ID_NOCARE is defined as 0xFFFF but Spec says (UINT64) -1
should be used to match any VendorId/DeviceId/RevisionId/
SubsystemVendorId/SubsystemDeviceId.
PCI_BAR_OLD_ALIGN/PCI_BAR_EVEN_ALIGN/PCI_BAR_SQUAD_ALIGN/
PCI_BAR_DQUAD_ALIGN are defined but Spec doesn't have such
definitions.
PCI_BAR_ALL is defined as 0xFF but Spec says (UINT64)-1 should be
used to match all BARs.
PCI_ACPI_UNUSED and PCI_BAR_NOCHANGE are defined as 0 which
compliant with Spec but the name is too general and causes confusing.
IncompatiblePciDeviceSupport could directly use 0.
All of the above macros are marked as deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340
TPM Device (Type 43) definition has been added at
713e4b007c.
This patch is to add definitions for below items.
• BIOS Information (Type 0):
– Add new entry for extended BIOS ROM size
• System Enclosure or Chassis (Type 3):
– Add new chassis types: IoT Gateway and Embedded PC
– Add new chassis types: Mini PC and Stick PC
• Processor Information (Type 4):
– Add Intel Core m3 m5 m7 processors
– Add processor socket AM4
– Add processor socket LGA1151
– Add processor socket BGA1356, BGA1440, BGA1515
– Add AMD Opteron A-Series processor
– Add processor socket LGA3647-1
– Add processor socket SP3 Processors
– Add families for ARMv7 and ARMv8
– Add family for AMD Opteron(TM) X3000 Series APU
• Cache Information (Type 7):
– Extend to support Cache sizes >2047 MB
• System Slots (Type 9):
– Add Mini PCIe support
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=298
Then this event empty function can be used to remove
the duplication in drivers and other libraries.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=311
The patch is also to refine comments of macros PcdToken and PcdTokenEx.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The UefiCpuPkg/CpuIo2Dxe driver and the QemuCfgLib library have duplicate
implementations of I/O Fifo routines. This patch clones the I/O Fifo
routines into the BaseIoLibIntrinsic library and expands the IoLib class
to include the ported I/O Fifo routines.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Starting with SMBIOS spec version 2.7, Type 3 added SKU Number.
SKU Number is at a variable offset (depends on count and length of Contained Elements), so cannot add SKU Number to the SMBIOS_TABLE_TYPE3 structure.
Adding comments to explain how to get SKU Number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Added definitions for the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix incompatible change. Some modules are still referencing old definition.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
FileHandleLib.h uses the data type EFI_FILE_INFO,
so this library class should include <Guid/FileInfo.h>.
Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update TPM2 ACPI Table revision to 4. New version & data structure is
defined in TCG ACPI Spec 00.37
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add the following 2 APIs:
UnicodeStrnToAsciiStrS
AsciiStrnToUnicodeStrS
These APIs are used to enhance APIs UnicodeStrToAsciiStrS and
AsciiStrToUnicodeStrS (without 'n' in names) by:
1. Adds an input parameter 'Length' to specify the maximum number of
Ascii/Unicode characters to convert.
2. Adds an output parameter 'DestinationLength' to indicate the number of
Ascii/Unicode characters successfully converted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
For the following 8 APIs in MdePkg/BaseLib:
[Ascii]StrDecimalToUintn
[Ascii]StrDecimalToUint64
[Ascii]StrHexToUintn
[Ascii]StrHexToUint64
They will ASSERT for DEBUG build when the input string exceeds the range
of UINTN/UINT64. However, for RELEASE build, incorrect value will be
returned.
This commit refines those APIs to direcly call their enhanced counterparts
(with trailing 'S' in API names) so as to remove those exceed-range ASSERT
checks and to make those APIs to return MAX_UINTN/MAX_UINT64 instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add the following 8 APIs:
[Ascii]StrDecimalToUintnS
[Ascii]StrDecimalToUint64S
[Ascii]StrHexToUintnS
[Ascii]StrHexToUint64S
These safe version APIs are used to enhance their counterpart (APIs
without trailing 'S' in function names).
These safe version APIs perform checks to the input string and will return
relative status to reflect the check result:
When the input string exceeds the range of UINTN/64, these APIs will
return RETURN_UNSUPPORTED and store MAX_UINTN/64 in the output data.
When no conversion can be performed for the input string, these APIs will
return RETURN_SUCCESS and store 0 in the output data.
The optional parameter 'EndPointer', if provided, will point to the
character that stopped the scan.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add StrnSizeS() and AsciiStrnSizeS() APIs.
These 2 safe version APIs are used to replace StrSize() and
AsciiStrSize(). Those two APIs use similar checks as [Ascii]StrnLenS().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The BaseNull instance of S3BootScriptLib obviously doesn't care about the
type of the S3BootScriptSaveMemPoll() function's LoopTimes parameter; this
lib instance doesn't do anything with the parameters received in
S3BootScriptSaveMemPoll().
The PiDxe instance saves the LoopTimes parameter in
EFI_BOOT_SCRIPT_MEM_POLL.LoopTimes. This target field already has UINT64
type. Furthermore, the BootScriptExecuteMemPoll() function in the same
library instance already uses a local UINT64 variable called LoopTimes to
count up to EFI_BOOT_SCRIPT_MEM_POLL.LoopTimes. This means that the the
UINTN type for S3BootScriptSaveMemPoll()'s LoopTimes parameter is an
unnecessary restriction.
The callers of S3BootScriptSaveMemPoll() will be updated in the next
patches, functionally. At this stage, they will continue to compile, since
UINT64 parameters can accept UINTN arguments.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
This path is used to standardize TLS definitions from related
RFCs. Including TLS Cipher Suites, TLS Version, TLS Content Type
and TLS Record Header, etc.
Cc: Long Qin <qin.long@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is used to add Tls.h and TlsConfig.h header
files to define EFI TLS Configuration Protocol,
EFI TLS Service Binding Protocol and
EFI TLS Configuration Protocol.
Cc: Long Qin <qin.long@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=201
In V3, Use Odt to replace ODT, Cke to replace CKE, Id to replace ID,
and Cl to replace CL in structure field name.
In V2, separate DDR3, DDR4 and LPDDR definition into the different files;
use the different SPD prefix as structure definitions for each SPD type.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
VM related defs are now in EbcVmTest.h, and opocode related definitions in
Ebc.h.
Because it is used by both the EBC Debugger and driver,
EbcDebugSignalException() sees its definition factorized in
EbcDebuggerHook.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=239
When the input path for API PathRemoveLastItem() is a root path like
'fs0:\', the API will return TRUE (indicating a directory or file was
removed from the path) and modifies the path to 'fs0:'. In fact, there's
no directory or file removed in the above case.
This commit adds additional check to resolve this issue and modifies the
API's description to make it more straightforward.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The SpinLock functions in the SynchronicationLib use volatile
parameters to keep compiler from optimizing these functions
too much. The volatile keyword is missing from the Interlocked*()
functions in this same library class. Update the library class
to consistently use volatile on all functions in this class.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the FvImage buffer is not at its required alignment, then ASSERT().
Also update the function header description of BuildFv(2)Hob()
correspondingly.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=205
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=181
Add size check for 8-bit, 16-bit, and 32-bit enums
to make sure they follow the UEFI Specification 2.3.1
Data Types.
<Enumerated Type>
Element of a standard ANSI C enum type declaration.
Type INT32.or UINT32. ANSI C does not define the
size of sign of an enum so they should never be
used in structures. ANSI C integer promotion rules
make INT32 or UINT32 interchangeable when passed as
an argument to a function.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=180
The PCI_SEGMENT_LIB_ADDRESS() macro puts the Segment number
into bits 32..47 of the logical address that is returned.
The portable method to put Segment in this bit range is to
use LShitU64(). For 64-bit CPUs, this is optimized well
by the compiler. For 32-bit CPUs, a call to LSHiftU64()
is included in the generated binaries. However, if the
Segment parameter is 0, then no shift is required. Add
a check for Segment set to 0 and provide an optimized
macro implementation that does not call LShiftU64().
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Several modules use ARRAY_SIZE() already; centralize the definition. (The
module-specific macro definitions are guarded by #ifndef directives at
this point.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: David Wei <david.wei@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Gary Lin <glin@suse.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Tim He <tim.he@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
ASSERT_EFI_ERROR() cannot be used in BASE type modules because
- the replacement text calls EFI_ERROR(),
- EFI_ERROR() is defined in "MdePkg/Include/Uefi/UefiBaseType.h",
- the inclusion of "UefiBaseType.h" is not required for BASE type modules.
While
ASSERT (!RETURN_ERROR (StatusParameter))
would be a functional statement in BASE type modules, it would be less
convenient and less informative: ASSERT_EFI_ERROR() prints the actual
StatusParameter.
Hence add ASSERT_RETURN_ERROR(), paralleling ASSERT_EFI_ERROR(). Copy the
original macro definition and update it as follows:
- replace EFI with RETURN,
- wrap overlong lines in the comment block and in the code,
- EFI_D_ERROR is deprecated, so employ DEBUG_ERROR instead.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=166
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Move Shell/ShellDynamicCommand/ShellParameters definitions from
ShellPkg to MdePkg.
The following patches will rename the header file name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Correct the typos in some header files of MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
HiiImage.h uses EFI_GRAPHICS_OUTPUT_BLT_PIXEL which is defined in
GraphicsOutput.h. Include GraphicsOutput.h to avoid build failure
from consumer of HiiImage protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Besides adding the missing structure
EFI_HII_IMAGE_DECODER_OTHER_INFO, the patch also correct some typo.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the protocol header file to follow EDKII file
name rule before the HiiImageDecoder protocol is used
by anyone.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of API IsZeroBuffer() via C language for the
following library instances:
BaseMemoryLib
PeiMemoryLib
UefiMemoryLib
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The RVCT compiler in --gnu mode appears to simply strip of the __builtin
prefix when it encounters calls to __builtin_xxx() functions, and so
the __builtin_unreachable() we emit for GCC results in linker errors
regarding undefined references against 'unreachable()'.
So define UNREACHABLE() to a NOP instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In latest UEFI2.6 spec, the type of the fourth parameter in function
GetImageInfo() is "EFI_IMAGE_OUTPUT", but in the header file, it is
"EFI_IMAGE_INPUT". Now correct it to follow the spec.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Abner Chang <abner.chang@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This adds support for GCC 5.x in LTO mode for IA32, X64, ARM and
AARCH64. Due to the fact that the GCC project switched to a new
numbering scheme where the first digit is now incremented for every
major release, the new toolchain is simply called 'GCC5', and is
intended to support all GCC v5.x releases.
Since IA32 and X64 enable compiler optimizations (-Os) for both DEBUG
and RELEASE builds, LTO support is equally enabled for both targets.
On ARM and AARCH64, DEBUG builds are not optimized, and so the LTO
optimizations are only enabled for RELEASE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When using GCC to build for X64, we switched to the position independent
small code model, which is much more efficient in terms of code generation
and runtime relocation footprint, and produces binaries that can execute
correctly from any offset.
However, the PIC routines are by default geared towards hosted binaries
containing symbol references that may resolve to definitions in other
dynamic objects, and for this reason, most symbol references are indirected
via a GOT entry (which also results in a .reloc fixup entry) unless we
annotate them.
For this reason, we introduced the 'protected' visibility annotation for
all symbol definitions and references, by setting the GCC visibility
pragma. However, as it turns out, this is not sufficient for all versions
of GCC, and in some cases (GCC 5.x using the GCC49 toolchain tag), may
still result in GOT based relocations.
So switch to 'hidden' visibility instead, which is slightly stronger, and
fixes this issue for the versions of GCC that exhibit the problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When building position independent (PIC) ELF objects, the GCC compiler
assumes that each symbol with external linkage may potentially end up
being exported from a shared library, which means that each of those
symbols may be subject to symbol preemption, i.e., the executable
linking to the shared library at runtime may override symbols exported
by the shared library, and every internal reference held by the shared
library itself *must* be made to point to the overridden version instead.
For this reason, PIC code symbol references always go via the Global
Offset Table (GOT), even if the code in question references symbols that
are defined in the same compilation unit. The GOT refers to each symbol
by absolute address, and so each entry is subject to runtime relocation.
Since not every symbol with external linkage is ultimately exported from
a shared library, the GCC compiler allows control over symbol visibility
using attributes, command line arguments and pragmas, where 'protected'
means that the symbol is only referenced by the shared library itself.
Due to the poor hygiene in EDK2 regarding the use of the 'static'
modifier, many symbols that are local to their compilation unit end up
being referenced indirectly via the GOT when building PIC code.
In UEFI, there are no shared libraries and so there is no need to deal
with symbol preemption, and we can mark every symbol reference protected.
The only method that applies to all symbol definitions as well as
declarations is the #pragma. So set the visibility 'protected' pragma when
building PIC code for X64 using GCC. Note that this affects code generated
with the -fpie compiler switch as well as the -fpic compiler switch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is never set anymore, so unsetting it or testing whether it is unset
no longer makes any sense.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Both GCC and LLVM 3.8 64bits support new variable argument (VA)
intrinsics for Microsoft ABI, enable these new VA intrinsics for
GNUC family 64bits code build. These VA intrinsics are only
permitted use in 64bits code, so not use them in 32bits code build.
The original 32bits GNU VA intrinsics has the same calling convention
as MS, so we don't need change them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
[ardb: update CPP logic so that the change only applies to X64]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GCC v4.4 does not implement __builtin_unreachable(), so avoid using
it when building with this version or earlier.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The "Pci22.h" header file defines the macro EFI_PCI_CAPABILITY_ID_HOTPLUG
with value 0x06. According to all of:
- later parts of the same header file,
- Appendix H ("Capability IDs") of the PCI Local Bus Specification
Revision 2.3,
- and Chapter 2 ("Capability IDs") of the PCI Code and ID Assignment
Specification Revision 0.9,
0x06 means "CompactPCI Hot Swap". It does not mean "PCI Hot-Plug": that
capability is described by ID 0x0C:
0Ch PCI Hot-Plug -- This Capability ID indicates that the associated
device conforms to the Standard Hot-Plug Controller model.
Therefore EFI_PCI_CAPABILITY_ID_HOTPLUG is arguably a misnomer. PciBusDxe
(mis-)uses EFI_PCI_CAPABILITY_ID_HOTPLUG in the IsSHPC() helper function
to identify PCI Hot-Plug capability.
In order to preserve compatibility with existent code, leave
EFI_PCI_CAPABILITY_ID_HOTPLUG alone, and introduce
EFI_PCI_CAPABILITY_ID_SHPC with the right ID value.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Ruiyu Ni
Zhang, Chao B
Long Qin
Star Zeng
Liming Gao
Laszlo Ersek
Jiaxin Wu
Paulo Alcantara
Jiewen Yao
Eric Dong
Wang Fan
Dandan Bi
Marvin.Haeuser@outlook.com
Alcantara, Paulo
Fu Siyuan
Hao Wu
Ard Biesheuvel
Yonghong Zhu
hegdenag
Jeff Fan
Leo Duran
Chris Phillips
Linson Augustine
Michael Kinney
Pete Batard
Song, BinX
Gary Lin
Giri P Mudusuru
Zhang Lubo
Thomas Huth
Shi, Steven