- abstrated to abstracted
- accessibla to accessible
- addres to address
- apropriate to appropriate
- arry to array
- availabe to available
- avaliable to available
- becasue to because
- correponding to corresponding
- etablished to established
- exeuction to execution
- extensiable to extensible
- fileds to fields
- loadding to loading
- ptototypes to prototypes
- prococol protocol
- requried to required
- resoruce to resource
- runing to running
- uild to build
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PeiCore EntryPoint library _ModuleEntryPoint() will call PeiCore(), then call
CpuDeadLoop (). When NORETURN is added for PeiCore(), MSVC compiler will report
warning C4702: unreachable code for CpuDeadLoop (). And, the warning is treated
as error and cause build break. DxeMain() has the similar issue.
edk2 uses EntryPoint library to wrap every module entry point function except
for SEC. The module entry point is still called by _ModuleEntryPoint(). So,
there will be negative impact to add NORETURN for the module entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
This patch adds the NORETURN attribute to functions that transfer to
other phases, along with an UNREACHABLE() call at the end to avoid
false warnings.
DxeIpl has been excluded as its main function returns a status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI1.4a spec added "For S3 resume boot modes DXE IPL must be
prepared to execute without permanent memory installed and
invoke the S3 resume modules."
To follow PI1.4a spec, this patch is to update DxeIpl and
PeiCore to enable S3 resume from temporary memory.
The normal boot path still enforces the permanent memory
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Katie Dellaquila <katie.dellaquila@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FirmwareVolmeInfoPpiNotifyCallback is re-enterable during FV process. Since PrivateData->FVCount increases when processing each sub FVs, need to cache Parent FV count in stack before processing any sub FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
When PcdShadowPeimOnBoot is FALSE, they are not copied to memory and
execute from their original locations. Here, this policy should only
apply for PEIM and PEI_CORE, not for other file type, such as DXE_CORE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
(HandoffInformationTable->EfiFreeMemoryBottom - Private->HobList.Raw)
is the PEI temp heap used instead of the length of PEI temp heap.
The length of PEI temp heap should be:
(HandoffInformationTable->EfiFreeMemoryTop - Private->HobList.Raw)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19762 6f19259b-4bc3-4df7-8a09-765794883524
The single line for(); construct is followed by code that is indented.
This triggers the -Wempty-body warning. Fix indentation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19420 6f19259b-4bc3-4df7-8a09-765794883524
The ASSERT (PrivateData->PeiMemoryInstalled) in if (PrivateData->PeiMemoryInstalled)
condition is useless, it should be ASSERT (FALSE) to follow the code's expectation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18887 6f19259b-4bc3-4df7-8a09-765794883524
A corner case like below will cause a NOT_DISPATCHED FV has no opportunity to
be dispatched.
1. FV_RECOVERY has SecCore, PeiCore and some other PEI modules, a module will
report FVMAIN_COMPACT and FV_RECOVERY2 in sequence.
2. FVMAIN_COMPACT has a FV image file with GUIDED FV image section in it.
3. FV_RECOVERY2 has DxeIpl and other PEI modules, the DxeIpl will install
SectionExtractionPpi
If ALL the PEIMs in FV_RECOVERY and FV_RECOVERY2 have DEPEX satisfied and
executed in one loop, PeimNeedingDispatch will be always FALSE, FVMAIN_COMPACT
will have no opportunity to be decompressed and dispatched as DxeIpl executes
after the first processing to FVMAIN_COMPACT.
The patch is to set PeimNeedingDispatch to TRUE when ProcessFvFile() not successfully,
then the NOT_DISPATCHED FV could have another opportunity to be processed.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18781 6f19259b-4bc3-4df7-8a09-765794883524
This patch fixes an issue in PEI with encapsulated FV images where the
AuthenticationStatus is not correctly propagated down to child FV
handles. The PEI core registers for callbacks for both FvInfo and
FvInfo2 PPIs. These callbacks process the FVs which will recurse as
necessary to find more encapsulated FVs. (FvInfo2 is an updated PPI
that includes an AuthenticationStatus field - the original FvInfo did
not include this.)
When encapsulated FV processing occurs the PEI core installs both
FvInfo and FvInfo2 PPIs. The original implementation installs FvInfo
first and FvInfo2 second. As soon as the FvInfo PPI is installed the
notification callback handler immediately fires causing recursive FV
processing to occur. Since there is no AuthenticationStatus provided
for the original FvInfo the callback assumes AuthenticationStatus is
zero (unsigned / unverified) even though the parent FV may have been
verified.
This changes the order of FvInfo and FvInfo2 installs to ensure that
the notification callback occurs for FvInfo2 first and appropriate
AuthenticationStatus data can be propagated from parent FV to child
FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18764 6f19259b-4bc3-4df7-8a09-765794883524
in case PeiInstallPeiMemory() is done in a callback with
EFI_PEI_PPI_DESCRIPTOR_NOTIFY_DISPATCH, and the callback is registered on
a PPI that is installed in the last PEIM.
At the case, PeiCore SwitchStack code will be not being invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18305 6f19259b-4bc3-4df7-8a09-765794883524
v2 changelog:
Check CurrentPeimHandle to check the matched PeimHandle.
Add check point to ShadowPeiCore based on PCD.
v1 changelog:
PeiCore LoadImage always shadow itself and PEIM on normal boot after
the physical memory is installed. On the emulator platform, the shadow
may be not necessary. To support such usage, new PCD PcdShadowPeimOnBoot
is introduced to specify whether loads PEIM in memory by default.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18125 6f19259b-4bc3-4df7-8a09-765794883524
Child FV may be placed in parent FV image without process required. Then,
Child FV and parent FV will be in the same continuous space. For FileHandle,
FileHandleToVolume() function needs to find the best matched FV handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17704 6f19259b-4bc3-4df7-8a09-765794883524
Add status code report and cpu deadloop when DXE IPL PPI is not found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17087 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore calls REPORT_STATUS_CODE_WITH_EXTENDED_DATA() with its internal structure for Image
dispatcher. No code consumes it. But, it brings confuse.
DxeCore and SmmCore calls REPORT_STATUS_CODE_WITH_EXTENDED_DATA() with Handle only.
To be consistent, update PeiCore to be same to DxeCore and SmmCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17085 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore FirmwareVolmeInfoPpiNotifyCallback() should check FvCount when new one is added.
Now, this check is the entry of Notify function that is too early, because PeiCore will
install FvInfo and FvInfo2 both for one sub FV image and trig FvNotify function twice for the same FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16520 6f19259b-4bc3-4df7-8a09-765794883524
It can fix the confused ERROR log like below.
"AllocatePages failed: No 0x1 Pages is available.
There is only left 0x1 pages memory resource to be allocated."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16211 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
It changes some of the PCD declarations to add more supported PCD storage types and
the change in the PCD access methods is associated with that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15798 6f19259b-4bc3-4df7-8a09-765794883524
2. PeiCore will call this API to migrate the PEI Services Table pointer from temporary RAM to permanent RAM.
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15115 6f19259b-4bc3-4df7-8a09-765794883524
1. HOB address is not 8 byte alignment.
2. FV with the max supported PEIM can't be dispatched.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14993 6f19259b-4bc3-4df7-8a09-765794883524
2. Add support to find section by instance rather than only 0 at PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14763 6f19259b-4bc3-4df7-8a09-765794883524