Consider the situation as shown in below chart. The last ACK message has
acknowledged the Tcb->RcvWl2, and all the segments until Tcb->RcvNxt have
been received by TCP driver. The Tcb->RcvNxt is not acknowledged due to the
delayed ACK. In this case an incoming segment (Seg->Seq, Seg->End) should
not be accepted by TCP driver, and an immediate ACK is required.
Current TcpSeqAcceptable() thought it’s an acceptable segment incorrectly, it
continues the TcpInput() process instead of sending out an ACK and droping the
segment immediately.
Tcb->RcvWl2 Tcb->RcvNxt Tcb->RcvWl2 + Tcb->RcvWnd
Seg->Seq Seg->End | |
| | | | |
---+-----+---------------+-------------+--------------------------+-----------
<income segment> <----Acceptable Range--- -->
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Eugene Cohen <eugene@hp.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Consider the situation as shown in below chart. The last ACK message has
acknowledged the Tcb->RcvWl2, and all the segments until Tcb->RcvNxt have
been received by TCP driver. The Tcb->RcvNxt is not acknowledged due to the
delayed ACK. In this case an incoming segment (Seg->Seq, Seg->End) should
not be accepted by TCP driver, and an immediate ACK is required.
Current TcpSeqAcceptable() thought it’s an acceptable segment incorrectly, it
continues the TcpInput() process instead of sending out an ACK and droping the
segment immediately.
Tcb->RcvWl2 Tcb->RcvNxt Tcb->RcvWl2 + Tcb->RcvWnd
Seg->Seq Seg->End | |
| | | | |
---+-----+---------------+-------------+--------------------------+-----------
<income segment> <----Acceptable Range--- -->
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Eugene Cohen <eugene@hp.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
If the library is listed in [Components] section for build only, its
used FixedPcd Value is not generated into AutoGen code. This patch
cover this case to generate the FixedPcd Value in AutoGen file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow the Shell Spec, when the interface name is Specified,
we need to refresh the Ipv6 configuration.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Under certain circumstances, QEMU exposes the "etc/msr_feature_control"
fw_cfg file, with a 64-bit little endian value. The firmware is supposed
to write this value to MSR_IA32_FEATURE_CONTROL (0x3a), on all processors,
on the normal and the S3 resume boot paths.
Utilize EFI_PEI_MPSERVICES_PPI to implement this feature.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Fixes: https://github.com/tianocore/edk2/issues/97
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the next patch we're going to put EFI_PEI_MP_SERVICES_PPI to use.
CpuMpPei uses the following PCDs from gUefiCpuPkgTokenSpaceGuid, beyond
those already used by CpuDxe:
- PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize: these
control whether CpuMpPei performs microcode update. If the region size
is zero, then the microcode update is skipped. UefiCpuPkg.dec sets the
region size to zero by default, which is appropriate for OVMF.
- PcdCpuApLoopMode and PcdCpuApTargetCstate: the former controls how
CpuMpPei puts the APs to sleep: 1 -- HLT, 2 -- MWAIT, 3 -- busy wait
(with PAUSE). The latter PCD is only relevant if the former PCD is 2
(MWAIT). In order to be consistent with SeaBIOS and with CpuDxe itself,
we choose HLT. That's the default set by UefiCpuPkg.dec.
Furthermore, although CpuMpPei could consume SecPeiCpuExceptionHandlerLib
technically, it is supposed to consume PeiCpuExceptionHandlerLib. See:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/12703
- git commit a81abf1616 ("UefiCpuPkg/ExceptionLib: Import
PeiCpuExceptionHandlerLib module"), part of the series linked above.
Jeff recommended to resolve CpuExceptionHandlerLib to
PeiCpuExceptionHandlerLib for all PEIMs:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/14471/focus=14477
Since at the moment we have no resolution in place that would cover this
for PEIMs (from either [LibraryClasses] or [LibraryClasses.common.PEIM]),
it's easy to do.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
No module in OvmfPkg uses these PCDs any longer.
The first PCD mentioned is declared by OvmfPkg, so we can remove even the
declaration.
The second PCD comes from IntelFrameworkModulePkg. The module that
consumes PcdS3AcpiReservedMemorySize is called
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe", and it is built
into OVMF. However, AcpiS3SaveDxe consumes the PCD only conditionally: it
depends on the feature PCD called PcdFrameworkCompatibilitySupport, which
we never enable in OVMF.
The 32KB gap that used to be the S3 permanent PEI memory is left unused in
MEMFD for now; it never hurts to have a few KB available there, for future
features.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Move the permanent PEI memory for the S3 resume boot path to the top of
the low RAM (just below TSEG if the SMM driver stack is included in the
build). The new size is derived from CpuMpPei's approximate memory demand.
Save the base address and the size in new global variables, regardless of
the boot path. On the normal boot path, use these variables for covering
the area with EfiACPIMemoryNVS type memory.
PcdS3AcpiReservedMemoryBase and PcdS3AcpiReservedMemorySize become unused
in PlatformPei; remove them.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
CpuMpPei will have to place the AP startup vector in memory under 1MB. For
this, CpuMpPei borrows memory under 1MB, but it needs a memory resource
descriptor HOB to exist there even on the S3 resume path (see the
GetWakeupBuffer() function). Produce such a HOB as an exception on the S3
resume path.
CpuMpPei is going be dispatched no earlier than PlatformPei, because
CpuMpPei has a depex on gEfiPeiMemoryDiscoveredPpiGuid, and PlatformPei
calls PublishSystemMemory().
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
CheckProcessorFeature() invokes MpService->StartupAllAps() to detect
XD/BTS features on normal boot path. It's not necessary and may cause
performance impact, because INIT-SIPI-SIPI must be sent to APs if APs
are in hlt-loop mode. XD/BTS feature detection is moved to
SmmInitHandler() in SMM relocation during normal boot path.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
It will be set to TRUE during S3 resume.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REGISTER_TYPE in UefiCpuPkg/Include/AcpiCpuData.h defines a MemoryMapped
enum value. However support for the MemoryMapped enum is missing from
the implementation of SetProcessorRegister(). This patch adds support
for MemoryMapped type SetProcessorRegister().
One spin lock is added to avoid potential conflict when multiple processor
update the same memory space.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
InitializeMpSyncData() invokes InitializeSmmCpuSemaphores() to allocate an
aligned buffer for all locks and semaphores. However, this function is
invoked on S3 resume path again to reset mSmmMpSyncData. It causes
an additional aligned buffer to be allocated.
This update moves InitializeSmmCpuSemaphores() into
InitializeMpServiceData() that is only invoked on normal boot.
InitializeMpSyncData() is updated to reset the locks/semaphore in
mSmmMpSyncData.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The AXI<->PCIe translation comments are out of date with
respect to the code. In the first case the AXI master port
is incorrectly called a slave. In the second case the the
translation direction indicated for the slave port is the
wrong direction.
Correct both of these comments to reflect what the code is
doing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Juno PIO mapping is 8M, so it should be using a 32-bit
PIO address translation. Further, PIO addresses should start
at 0 and be translated to/from the ARM MMIO region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The input PeImage in HashPeImage() has been checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use BasePeCoffLib PeCoffLoaderGetImageInfo() to check the PE/COFF image.
In V2, add specific ImageRead() to make sure the PE/COFF image content
read is within the image buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use BasePeCoffLib PeCoffLoaderGetImageInfo() to check the PE/COFF image.
In V2, add specific ImageRead() to make sure the PE/COFF image content
read is within the image buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use BasePeCoffLib PeCoffLoaderGetImageInfo() to check the PE/COFF image.
In V2, add specific ImageRead() to make sure the PE/COFF image content
read is within the image buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
PlatformSecLib.h is not used and removed.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Some processor may return small cache line size, we should return 32 bytes at
least for spin lock alignment.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Remove Pmode(Entry)Offset/Lmode(Entry)Offset and use unified Mode(Entry)Offset
to clean up the definition of MP_ASSEMBLY_ADDRESS_MAP and MP_CPU_EXCHANGE_INFO.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Do not load the new GDT table and just to use the exiting BSP's GDT table set up
by SEC phase.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Using CodeSegment and DataSegment fields in ExchangeInfo instead of the hardcode
MACROs for x64 arch. Switch AP from real mode to long mode directly, so needn't
the CS/DS of protected mode.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Using CodeSegment and DataSegment fields in ExchangeInfo instead of the hardcode
MACROs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Added CodeSegment and DataSegment fields in MP_CPU_EXCHANGE_INFO. They are set
to the values of current BSP's CS and DS.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Since in the GenFds phase, the FV is generated as upper letter. This
patch update the FV region name as upper letter, it can fix the build
report generate failure on case sensitive file system.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
(This patch ports OvmfPkg commit 2eb3589860 to ArmVirtPkg. That
functionality was not added to QemuBootOrderLib, because it was (and is)
independent from QEMU and fw_cfg.)
Remove any boot options that point to binaries built into the firmware and
have become stale due to any of the following:
- FvMain's base address or size changed (historical -- see commit
e191a3114f),
- FvMain's FvNameGuid changed,
- the FILE_GUID of the pointed-to binary changed,
- the referenced binary is no longer built into the firmware.
For example, multiple such "EFI Internal Shell" boot options can coexist.
They technically differ from each other, but may not describe any built-in
shell binary exactly. Such options can accumulate in a varstore over time,
and while they remain generally bootable (thanks to the efforts of
BmGetFileBufferByFvFilePath()), they look bad.
Filter out any stale options.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: https://github.com/tianocore/edk2/issues/107
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The E820EntriesCount variable in XenPublishRamRegions() may be
referenced without being initialized on RELEASE builds, since the
ASSERT that fires if the call to XenGetE820Map() fails is compiled
out in that case. So initialize it to 0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Unlike SGIs and PPIs, which are private to the CPU and are managed at
the redistributor level (which is also a per-CPU construct), shared
interrupts (SPIs) are shared between all CPUs, and therefore managed at
the distributor level (just as on GICv2).
Reported-by: Narinder Dhillon <ndhillonv2@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit fafb7e9c11 ("ArmPkg: correct TTBR1_EL1 settings in TCR_EL1")
introduced a symbolic constant TCR_TG1_4KB which resolves to (2 << 30),
and ORs it into the value to be written into TCR_EL1 (if executing at
EL1). Since the constant is implicitly typed as signed int, and has the
sign bit set, the promotion that occurs when casting to UINT64 results
in a TCR value that has bits [63:32] all set, which includes mostly
RES0 bits but also the TBIn, AS and IPS fields.
So explicitly redefine all TCR related constants as 'unsigned long'
types, using the UL suffix. To avoid confusion in the future, the
inappropriately named VTCR_EL23_xxx constants have the leading V
removed, and the actual VTCR_EL2 related constants are dropped, given
that we never configure stage 2 translation in UEFI.
Reported-by: Vishal Oliyil Kunnil <vishalo@qti.qualcomm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Verification microcode signature is one enhancement and not one requirement from
IA32 SDM. This update is just to dump debug message instead of ASSERT() if the
updated microcode signature does not match the loaded microcode signature.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Actually, there is only one microcode region in platform. If microcode has been
loaded, its signature will not be zero and should be loaded successfully.
We needn't to check microcode region and load microcode again. This update is to
skip checking/loading microcode if current microcode signature is not zero.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
After IncompatiblePciDeviceSupportDxe, this is another small driver /
protocol implementation that tweaks the behavior of the PCI bus driver in
edk2.
The protocol is specified in the Platform Init Spec v1.4a, Volume 5,
Chapter 12.6 "PCI Hot Plug PCI Initialization Protocol". This
implementation steers the PCI bus driver to reserve the following
resources ("padding") for each PCI bus, in addition to the BARs of the
devices on that PCI bus:
- 2MB of 64-bit non-prefetchable MMIO aperture,
- 512B of IO port space.
The goal is to reserve room for devices hot-plugged at runtime even if the
bridge receiving the device is empty at boot time.
The 2MB MMIO size is inspired by SeaBIOS. The 512B IO port size is
actually only 1/8th of the PCI spec mandated reservation, but the
specified size of 4096 has proved wasteful (given the limited size of our
IO port space -- see commit bba734ab4c). Especially on Q35, where every
PCIe root port and downstream port qualifies as a separate bridge (capable
of accepting a single device).
Test results for this patch:
- regardless of our request for 64-bit MMIO reservation, it is downgraded
to 32-bit,
- although we request 512B alignment for the IO port space reservation,
the next upstream bridge rounds it up to 4096B.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Section 7.8.2 of the PCI Express specification (r4.0 v0.3), entitled "PCI
Express Capabilities Register (Offset 02h)", and section 7.8.9 "Slot
Capabilities Register (Offset 14h)" of the same, describe the conditions
when a PCIe port should be considered "supporting hotplug":
- it should be a root complex port or a switch downstream port, and
- it should have the "Slot Implemented" bit set in the Express
Capabilities Register, and
- it should have the "Hot-Plug Capable" bit set in the Slot Capabilities
Register.
The first two sub-conditions are already implemented in at least two open
source projects I could find:
- in SeaBIOS by Marcel Apfelbaum: "hw/pci: reserve IO and mem for pci
express downstream ports with no devices attached"
<https://code.coreboot.org/p/seabios/source/commit/3aa31d7d6375>,
- in edk2 itself, in the implementation of the "PCI" UEFI Shell command:
see the "PcieExplainTypeSlot" case label in function
PciExplainPciExpress(), file
"ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c".
PciBusDxe recognizes such PCIe ports as bridges, but it doesn't realize
they support hotplug. In turn PciBusDxe omits getting any resource padding
information from the platform's EFI_PCI_HOT_PLUG_INIT_PROTOCOL for these
bridges:
GatherPpbInfo() [PciEnumeratorSupport.c]
GetResourcePaddingPpb() [PciResourceSupport.c]
GetResourcePaddingForHpb() [PciHotPlugSupport.c]
IsPciHotPlugBus() [PciHotPlugSupport.c]
//
// returns FALSE
//
//
// the following is not reached:
//
gPciHotPlugInit->GetResourcePadding()
Implement a function called SupportsPcieHotplug() for identifying such
ports, and call it from IsPciHotPlugBus() (after the call to IsSHPC()).
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The PCI Hot Plug capability register block is marked with capability ID
0x0C (EFI_PCI_CAPABILITY_ID_SHPC), not 0x06
(EFI_PCI_CAPABILITY_ID_HOTPLUG).
This bug prevents PciBusDxe from recognizing whether a PCI-to-PCI bridge
supports hotplug. In turn the platform's EFI_PCI_HOT_PLUG_INIT_PROTOCOL is
not consulted for resource padding information:
GatherPpbInfo() [PciEnumeratorSupport.c]
GetResourcePaddingPpb() [PciResourceSupport.c]
GetResourcePaddingForHpb() [PciHotPlugSupport.c]
IsPciHotPlugBus() [PciHotPlugSupport.c]
IsSHPC() [PciHotPlugSupport.c]
//
// returns FALSE
//
//
// the following is not reached:
//
gPciHotPlugInit->GetResourcePadding()
Look for the correct capability ID.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The "Pci22.h" header file defines the macro EFI_PCI_CAPABILITY_ID_HOTPLUG
with value 0x06. According to all of:
- later parts of the same header file,
- Appendix H ("Capability IDs") of the PCI Local Bus Specification
Revision 2.3,
- and Chapter 2 ("Capability IDs") of the PCI Code and ID Assignment
Specification Revision 0.9,
0x06 means "CompactPCI Hot Swap". It does not mean "PCI Hot-Plug": that
capability is described by ID 0x0C:
0Ch PCI Hot-Plug -- This Capability ID indicates that the associated
device conforms to the Standard Hot-Plug Controller model.
Therefore EFI_PCI_CAPABILITY_ID_HOTPLUG is arguably a misnomer. PciBusDxe
(mis-)uses EFI_PCI_CAPABILITY_ID_HOTPLUG in the IsSHPC() helper function
to identify PCI Hot-Plug capability.
In order to preserve compatibility with existent code, leave
EFI_PCI_CAPABILITY_ID_HOTPLUG alone, and introduce
EFI_PCI_CAPABILITY_ID_SHPC with the right ID value.
Cc: "Johnson, Brian J." <bjohnson@sgi.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Removes any boot options that point to binaries built into the firmware
and have become stale due to any of the following:
- DXEFV's base address or size changed (historical),
- DXEFV's FvNameGuid changed,
- the FILE_GUID of the pointed-to binary changed,
- the referenced binary is no longer built into the firmware.
For example, multiple such "EFI Internal Shell" boot options can coexist.
They technically differ from each other, but may not describe any built-in
shell binary exactly. Such options can accumulate in a varstore over time,
and while they remain generally bootable (thanks to the efforts of
BmGetFileBufferByFvFilePath()), they look bad.
Filter out any stale options.
This functionality is not added to QemuBootOrderLib, because it is
independent from QEMU and fw_cfg.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but
the detailed description can be found in Volume 3 of the Platform Init
spec (which is at 1.4a currently).
Adding an FvNameGuid statement to [FV.xxx] has the following effects
(implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"):
- The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero
value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not
directly, see below).
- An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to
address. This object is not followed by any
EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only
specifies the Name GUID for the firmware volume.
The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found
in the Build directory as a separate file (20 bytes in size):
Build/Ovmf*/*_GCC*/FV/*.ext
- The new data consume 48 bytes in the following volumes: SECFV,
FVMAIN_COMPACT, DXEFV. They comprise:
- 16 padding bytes,
- EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize
fields, and Type=EFI_FV_FILETYPE_FFS_PAD),
- EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above),
- 4 padding bytes.
(The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are
the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point
immediately past EFI_FIRMWARE_VOLUME_HEADER.)
The sizes of the firmware volumes don't change, only their internal
usages grow by 48 bytes. I verified that the statements and calculations
in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid.
- The new data consume 0 bytes in PEIFV. This is because PEIFV has enough
internal padding at the moment to accomodate the above structures
without a growth in usage.
In the future, firmware volumes can be identified by Name GUID (Fv(...)
device path nodes), rather than memory location (MemoryMapped(...) device
path nodes). This is supposed to improve stability for persistent device
paths that refer to FFS files; for example, UEFI boot options.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In its current form, Region.PadBuffer() fills every second byte with 0x20,
the default separator string of Python's string.join():
https://docs.python.org/2/library/string.html#string.join
This corrupts some firmware because (a) 0x20 never corresponds to any
ErasePolarity, (b) the PadData produced are actually longer than Size.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: bd907fb638
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Assign name GUIDs to the FVs that may appear in DevicePath references to
things like the UiApp and the UEFI Shell. This prevents these device
paths from changing inadvertently when the FV ends up in a different
memory location due to external occurrences such as, e.g., a change in
the amount of system memory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
All three current ArmVirtPkg have identical [Rules] sections in their
FDF definitions, and ideally, they should remain that way. So factor
out the definitions into a separate include file, and replace the
existing definitions with !include directives.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ruiyu Ni
Fu Siyuan
Yonghong Zhu
Zhang Lubo
Laszlo Ersek
Jeff Fan
Jeremy Linton
Liming Gao
Ard Biesheuvel