Add the legacy Linux Loader EFI application to the ARM
development platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17968 6f19259b-4bc3-4df7-8a09-765794883524
Android FastBoot EFI application was using the Linux Loader
from BdsLib. This change makes use of the EFI Linux Loader
application.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17967 6f19259b-4bc3-4df7-8a09-765794883524
Replaced the function BdsLoadApplication() by two explicit
functions that load the EFI application either by its GUID
or its Name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17966 6f19259b-4bc3-4df7-8a09-765794883524
The OFW device path that QEMU exports in the "bootorder" fw_cfg file, for
a device that is plugged into the main PCI root bus, is:
/pci@i0cf8/...
Whereas the same device plugged into the N'th extra root bus results in:
/pci@i0cf8,N/pci-bridge@0/...
(N is in hex.)
Extend TranslatePciOfwNodes() so that it not assume a single PCI root;
instead it parse the extra root bus serial number if present, and resolve
it in the translation to the UEFI devpath fragment.
Note that the "pci-bridge@0" node is a characteristic of QEMU's PXB
device. It reflects the actual emulated PCI hierarchy. We don't parse it
specifically in this patch, because it is automatically handled by the
bridge sequence translator added recently in SVN rev 17385 (git commit
feca17fa4b) -- "OvmfPkg: QemuBootOrderLib: parse OFW device path nodes of
PCI bridges".
The macro EXAMINED_OFW_NODES need not be raised from 6. The longest OFW
device paths that we wish to recognize under this new scheme comprise 5
nodes. The initial "extra root bus" OFW fragment, visible at the top,
takes up 2 nodes, after which the longest device-specific patterns (IDE
disk, IDE CD-ROM, ISA floppy, virtio-scsi disk) take 3 more nodes each.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17965 6f19259b-4bc3-4df7-8a09-765794883524
SeaBIOS requires the OpenFirmware device paths exported in the "bootorder"
fw-cfg file to refer to extra (PXB) root buses by their relative positions
(in increasing bus number order) rather than by actual bus numbers.
However, OVMF's PCI host bridge / root bridge driver creates PciRoot(UID)
device path nodes for extra PCI root buses with UID=bus_nr, not position.
(These ACPI devpath UID values must, and do, match the UID values exposed
in QEMU's ACPI payload, generated for PXB root buses.)
Therefore the boot order matching logic will have to map extra root bus
positions to bus numbers. Add a small group of utility functions to help
with that.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17964 6f19259b-4bc3-4df7-8a09-765794883524
QEMU provides an fw_cfg file called "etc/extra-pci-roots", containing a
little-endian UINT64 value that exposes the number of extra root buses. We
can use this value to terminate the scan as soon as we find the last extra
root bus.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17963 6f19259b-4bc3-4df7-8a09-765794883524
In this patch we assume that root bus number 0 is always there (same as
before), and scan the rest of the extra root buses, up to and including
255. When an extra root bus is found, we install the PCI root bridge IO
protocol for the previous root bus (which might be bus 0 or just the
previous extra root bus).
The root bridge protocol created thus will report the available bus number
range
[own bus number, next extra root bus number - 1]
The LHS of this interval will be used for the root bus's own number, and
the rest of the interval (which might encompass 0 additional elements too)
can be used by the PCI bus driver to assign subordinate bus numbers from.
(Subordinate buses are provided by PCI bridges that hang off the root bus
in question.)
For MMIO and IO space allocation, all the root buses share the original
[0x8000_0000, 0xFFFF_FFFF] and [0x0, 0xFFFF] ranges, respectively.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17962 6f19259b-4bc3-4df7-8a09-765794883524
This field was supposed to store the number of root buses created; however
we don't need to keep that count persistently. After the entry point returns,
nothing reads this field.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17961 6f19259b-4bc3-4df7-8a09-765794883524
On output, the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Configuration() function
produces a pointer to a buffer of ACPI 2.0 resource descriptors:
Resources A pointer to the ACPI 2.0 resource descriptors that describe
the current configuration of this PCI root bridge. The
storage for the ACPI 2.0 resource descriptors is allocated by
this function. The caller must treat the return buffer as
read-only data, and the buffer must not be freed by the
caller.
PciHostBridgeDxe currently provides this buffer in a structure with static
storage duration. If multiple root bridges existed in parallel, the
pointers returned by their Configuration() methods would point to the same
static storage. A later Configuration() call would overwrite the storage
pointed out by an earlier Configuration() call (which was possibly made
for a different, but still alive, root bridge.)
Fix this problem by embedding the configuration buffer in
PCI_ROOT_BRIDGE_INSTANCE.
While we're at it, correct some typos (Desp -> Desc), spell out a missing
pack(1) pragma, and improve formatting.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17960 6f19259b-4bc3-4df7-8a09-765794883524
The entry point of the driver, InitializePciHostBridge(), leaks resources
(and installed protocols) in the following cases:
- The first root bridge protocol installation fails. In this case, the
host bridge protocol is left installed, but the driver exits with an
error.
- The second or a later root bridge protocol installation fails. In this
case, the host bridge protocol, and all prior root bridge protocols, are
left installed, even though the driver exits with an error.
Handle errors correctly: roll back / release / uninstall resources when
aborting the driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17959 6f19259b-4bc3-4df7-8a09-765794883524
This new function incorporates the current loop body found in the entry
point function, InitializePciHostBridge(). It will be called once for each
root bus discovered.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17958 6f19259b-4bc3-4df7-8a09-765794883524
Currently we define a device path for each root bridge statically (for all
one of them). Since we'll want to create a dynamic number of root bridges,
replace the static device paths with a common template, embed the actual
device path into the private root bridge structure, and distinguish the
device paths from each other in the UID field (as required by ACPI).
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17957 6f19259b-4bc3-4df7-8a09-765794883524
There is no need to store these constants in dedicated static storage
duration objects; we can simply open-code them, simplifying the code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17956 6f19259b-4bc3-4df7-8a09-765794883524
The entry point function of this driver, InitializePciHostBridge(), and
the static storage duration objects it relies on, are speculatively
generic -- they nominally support more than one host bridges, but (a) the
code hardwires the number of host bridges as 1, (b) it's very unlikely
that we'd ever like to raise that number (especially by open-coding it).
So let's just remove the the nominal support, and simplify the code.
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17955 6f19259b-4bc3-4df7-8a09-765794883524
Currently we only connect the root bus with bus number 0, by device path.
Soon we will possibly have several extra root buses, so connect all root
buses up-front (bus number zero and otherwise), by protocol GUID.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17954 6f19259b-4bc3-4df7-8a09-765794883524
The ASSERT() in SetPciIntLine() assumes that Device 0 on "the" root bus
corresponds to the PCI host bridge (00:00). This used to be true, but
because we're going to have extra root buses (with nonzero bus numbers),
soon this assumption may no longer hold. Check for the zero root bus
number explicitly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17953 6f19259b-4bc3-4df7-8a09-765794883524
These messages are helpful for comparing the assignments made by OVMF
against those made by SeaBIOS. To SeaBIOS a small debug patch like the
following can be applied:
> diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> index ac39d23..9e61c22 100644
> --- a/src/fw/pciinit.c
> +++ b/src/fw/pciinit.c
> @@ -308,8 +308,12 @@ static void pci_bios_init_device(struct pci_device *pci)
>
> /* map the interrupt */
> int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN);
> - if (pin != 0)
> - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci, pin));
> + if (pin != 0) {
> + int irqline = pci_slot_get_irq(pci, pin);
> +
> + pci_config_writeb(bdf, PCI_INTERRUPT_LINE, irqline);
> + dprintf(1, "assigned irq line %d\n", irqline);
> + }
>
> pci_init_device(pci_device_tbl, pci, NULL);
>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17952 6f19259b-4bc3-4df7-8a09-765794883524
The source code is copied verbatim, with the following two exceptions:
- the UNI files are dropped, together with the corresponding UNI
references in the INF file,
- the INF file receives a new FILE_GUID.
The OVMF DSC and FDF files are at once flipped to the cloned driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17951 6f19259b-4bc3-4df7-8a09-765794883524
In this patch the code and the comments embedded in code are rewrapped to
79 columns, plus any trailing whitespace is stripped.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17950 6f19259b-4bc3-4df7-8a09-765794883524
In this patch the code and the comments embedded in code are rewrapped to
79 columns, plus any trailing whitespace is stripped.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17948 6f19259b-4bc3-4df7-8a09-765794883524
Relocations of type EFI_IMAGE_REL_BASED_DIR64 are handled in exactly
the same way on all 64-bit machine types (IPF, X64 and AARCH64).
So move the handling of this type to the generic part of the relocation
routine PeCoffLoaderRelocateImage ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17942 6f19259b-4bc3-4df7-8a09-765794883524
Use NetRandomInitSeed() instead of AsmReadTsc() to generate
a random seed.
Macro definition of EFI_HTTP_BOOT_CLIENT_SYSTEM_ARCHITECTURE for EBC architecture.
Add some space to make codes more standard.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: jiaxinwu <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17941 6f19259b-4bc3-4df7-8a09-765794883524
The StrnLenS and AsciiStrnLenS functions, when presented with a string
with no terminating NULL in the first MaxSize characters will check
the character at String[MaxSize] before checking if Length < MaxSize.
(They return the correct value, but have accessed beyond the stated
limit in the process.)
Flip the order of the tests to prevent this behaviour.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17936 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17745.
StrCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, StringPtr);
The above using of StrCpyS will cause ASSERT if StringPtr is longer than
mGaugeString. Therefore, StrnCpyS is used here to resolve the issue.
Similar scenario is for:
StrCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, NameString); (twice)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17935 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17744.
AsciiStrCpyS (PerfData->Token, PERF_TOKEN_SIZE, Token);
The above using of AsciiStrCpyS will cause ASSERT if Token is longer than
PerfData->Token. Therefore, AsciiStrnCatS is used here to resolve the
issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17934 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17738.
String = AllocateCopyPool (BufferLen, L"MAC:");
The above using of AllocateCopyPool() will read contents out of the scope
of the constant string. Potential risk for the constant string allocated
at the boundary of memory region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17933 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17737.
HelpString = AllocateCopyPool (HelpSize, L"Device Path : ");
The above using of AllocateCopyPool() will read contents out of the scope
of the constant string. Potential risk for the constant string allocated
at the boundary of memory region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17932 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17736.
Str = AllocateCopyPool (MaxLen * sizeof (CHAR16), Str1);
The above using of AllocateCopyPool() will read contents out of the scope
of Str1. Potential risk for Str1 allocated at the boundary of memory
region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17931 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17735.
StrCatS (StrPercent, sizeof (StrPercent) / sizeof (CHAR16), TmpStr);
The above using of StrCatS will cause ASSERT if TmpStr is longer than
StrPercent. Therefore, StrnCatS is used here to resolve the issue.
Similar scenario is for:
StrCatS (StrTotalMemory, StrTotalMemorySize / sizeof (CHAR16), TmpStr);
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17930 6f19259b-4bc3-4df7-8a09-765794883524
This commit will resolve the issue brought by r17733.
StringBuffer1 = AllocateCopyPool (
MAX_STRING_LEN * sizeof (CHAR16),
L"Configuration changed. Reset to apply it Now."
);
The above using of AllocateCopyPool() will read contents out of the scope
of the constant string. Potential risk for the constant string allocated
at the boundary of memory region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17929 6f19259b-4bc3-4df7-8a09-765794883524
Upstream OpenSSL version 1.0.2c contained a fatal flaw
[CVE-2015-1793] and is no longer available from the openssl.org
download servers. So upgrade to its replacement, version 1.0.2d.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17928 6f19259b-4bc3-4df7-8a09-765794883524
The PSCI specification covers both ARM and AARCH64, however, the
ARM Trusted Firmware (ATF) reference implementation is only available
for AARCH64, and PSCI firmware is not widely available for ARM platforms.
So use the EfiResetSystemLib implementation that uses PSCI calls only
on AARCH64, and revert to the Versatile Express-specific system register
interface (which is only available during boot time) on ARM platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17927 6f19259b-4bc3-4df7-8a09-765794883524
Instead of using a NULL implementation of ArmPlatformSysConfigLib for
DXE_RUNTIME_DRIVER modules, which prevents them from accessing system
control registers even at boot time, use the new implementation that
only switches into a non-functional mode at runtime, and operates as
before otherwise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17926 6f19259b-4bc3-4df7-8a09-765794883524
This adds a ArmPlatformSysConfigLib implementation that is usable by
DXE_RUNTIME_DRIVER modules. Since the system registers that this library
encapsulates are not usable at runtime, this driver allows access to
those registers only at boot time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17925 6f19259b-4bc3-4df7-8a09-765794883524
Revise some errors which may lead NULL pointer be dereferenced:
* DnsDhcp.c: Paralist may be used without any initialized
* DnsHeader and RcvString may be null but be dereferenced
* HttpDriver.c: revise an if judgment
* HttpImpl.c: add a judgment to avoid null dereferenced
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17923 6f19259b-4bc3-4df7-8a09-765794883524
The FileReserved variable in QemuFwCfgFindFile() is only used to skip
over the reserved field in file headers, which causes newer versions of
GCC to flag it with a "variable set but not used" warning (which is normally
not visible since as of right now these warnings are supressed). It's true
that the value read into FileReserved is never used, but this is
intentional. This patch adds a do-nothing reference to silence the
warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bill Paul <wpaul@windriver.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17920 6f19259b-4bc3-4df7-8a09-765794883524
System may break during time based AuthVariable update, causing certdb inconsistent. 2 ways are used to ensure update atomic.
1. Delete cert in certdb after variable is deleted
2. Clean up certdb on variable initialization
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17919 6f19259b-4bc3-4df7-8a09-765794883524
Ronald Cron
Olivier Martin
Laszlo Ersek
Ard Biesheuvel
Zhang Lubo
Jiaxin Wu
Bruce Cran
Qiu Shumin
Leif Lindholm
Hao Wu
fanwang2
Bill Paul
Chao Zhang