ASSERT (Private != NULL) (where Private = CR(...)) is ineffective as
CR(Ptr, Type, Member, Sig) either returns Ptr - offsetof(Type, Member),
or ASSERTS on the signature, so it's unlikely to ever return NULL (must
be passed a pointer = member's offset, or in this case, 0x4).
ASSERT on This != NULL instead.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When a UEFI_DRIVER attempts to open a protocol interface with BY_DRIVER
attribute that it already has open with BY_DRIVER attribute,
OpenProtocol() returns EFI_ALREADY_STARTED. This is not an error. The
UEFI-2.7 spec currently says,
> EFI_ALREADY_STARTED -- Attributes is BY_DRIVER and there is an item on
> the open list with an attribute of BY_DRIVER
> whose agent handle is the same as AgentHandle.
Downgrade the log mask for this one condition to DEBUG_INFO, in
SataControllerStart(). This will match the log mask of the other two
informative messages in this function.
(ported from commit 5dfba97)
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The ArmGicAcknowledgeInterrupt () returns the value returned by the
Interrupt Acknowledge Register and the InterruptID separately in an out
parameter.
The function documents the following: 'InterruptId is returned
separately from the register value because in the GICv2 the register
value contains the CpuId and InterruptId while in the GICv3 the register
value is only the InterruptId.'
This function skips setting the InterruptId in the out parameter for
GICv3. Although the return value from the function is the InterruptId
for GICv3, this breaks the function usage model as the caller expects
the InterruptId in the out parameter for the function. e.g. The caller
may end up using the InterruptID which could potentially be an
uninitialised variable value.
Therefore, set the InterruptID in the function out parameter for GICv3
as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
According to the GIC architecture version 3 and 4 specification, the
maximum number of INTID bits supported in the CPU interface is 24.
Considering this the RegShift variable is not required to be more than 8
bits. Therefore, make the RegShift variable type to UINT8. Also add
necessary typecasts when calculating the RegOffset and RegShift values.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
GICD_SGIR is a 32-bit register, of which INTID is bits [3:0] and Bits
[14:4] is RES0. Since SgiId parameter in the function ArmGicSendSgiTo ()
is UINT8, mask unused bits of SgiId before writing to the GICD_SGIR
register to prevent accidental setting of the RES0 bits.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The IrqInterruptHandler () and ExitBootServicesEvent () function
declarations were unused. Therefore, remove these declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The EIOR register of the Gic CPU interface is a 32 bit register.
However, the HARDWARE_INTERRUPT_SOURCE used to represent the interrupt
source (Interrupt ID) is typedefed as UINTN, see
EmbeddedPkg\Include\Protocol\HardwareInterrupt.h
Therfore, typecast the interrupt ID (Source) value to UINT32 before
setting the EOIR register. Also, add an assert to check that the value
does not exceed 32 bits.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Although the maximum interrupt ID on GicV2 is 10bit and for GicV3/4 is
24bit, and that the IAR and EOIR registers of the Gic CPU interface are
32 bit; the typedef HARDWARE_INTERRUPT_SOURCE is defined as UINTN in
EmbeddedPkg\Include\Protocol\HardwareInterrupt.h
Therefore, use UINTN for Gic Interrupt variables and use appropriate
typecasts wherever needed.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The CPU Interface Identification Register (GICC_IIDR) is a 32-bit
register. Since ArmGicGetInterfaceIdentification () returns the value
read from the GICC_IIDR register, update the return type for this
function to UINT32.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
According to edk2 coding standard specification, Non-Boolean comparisons
must use a compare operator (==, !=, >, < >=, <=). See Section 5.7.2.1
at https://edk2-docs.gitbook.io/
edk-ii-c-coding-standards-specification/5_source_files/ 57_c_programming
Therefore, fix the comparison in ArmGicEnableDistributor()
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The Software Generated Interrupt Register (GICD_SGIR) is a 32 bit
register with the following bit assignment:
TargetListFilter, bits [25:24]
CPUTargetList, bits [23:16]
NSATT, bit [15]
SGIINTID, bits [3:0]
Therefore, modify the TargetListFilter, CPUTargetList, SGI Interrupt ID
parameters of the ArmGicSendSgiTo () to use UINT8 instead of INTN.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The data type used by variables representing the
GicInterruptInterfaceBase has been inconsistently used in the ArmGic
driver and the library. The PCD defined for the GIC Interrupt interface
base address is UINT64. However, the data types for the variables used
is UINTN, INTN, and at some places UINT32.
Therefore, update the data types to use UINTN and add necessary
typecasts when reading values from the PCD. This should then be
consistent across AArch32 and AArch64 builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The data type used by variables representing the GicDistributorBase has
been inconsistently used in the ArmGic driver and the library. The PCD
defined for the GIC Distributor base address is UINT64. However, the
data types for the variables used is UINTN, INTN, and at some places
UINT32.
Therefore, update the data types to use UINTN and add necessary
typecasts when reading values from the PCD. This should then be
consistent across AArch32 and AArch64 builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC v2 base addresses can be 64bit, don't limit to 32 on 64bit
machines.
Signed-off-by: Neil Jones <neil.jones@blaize.com>
Reviewed-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In case a virtio serial device is found in the system register the first
console port as EFI console, by updating ConIn, ConOut and ErrOut.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
IsVirtioPciRng() becomes just a thin wrapper for IsVirtioPci().
This allows to add similar thin wrappers for other virtio
devices in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
IsVirtioRng() becomes just a thin wrapper for IsVirtio().
This allows to add similar thin wrappers for other virtio
devices in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use the MdePkg versions instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the MdePkg version instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the newer versions of the machine #defines.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The #define for IMAGE_FILE_MACHINE_ARM is not present in MdePkg,
this looks like a relic not used any more. Remove.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The BaseTools and MdePkg versions of PeImage.h diverged over time,
add some missing bits to the MdePkg header file in preparation for
removing the BaseTools version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the MdePkg version instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the MdePkg version instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Appears to be a relic for ancient windows / compiler versions,
windows builds in CI work just fine without it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Not needed any more on modern toolchains, they are better
in not creating a GOT without this trick.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Tell clang to not use external (via got) references for data access.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Older linux kernels have problems with phys-bits larger than 46,
ubuntu 18.04 (kernel 4.15) has been reported to be affected.
Reduce phys-bits limit from 47 to 46.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Flash can be write-protected in qemu (which is usually the case for
code). In case the variable store flash block is configured read-only
ovmf wouldn't be able to store EFI variables there, so not setting up
fvb in that case (and fallhack to emulation) is the better option.
It'll avoid problems later due to flash writes failing.
The patch tries to write back the original value read earlier, so flash
content doesn't change in case the write succeeds. But the status we
read back after the attempt to write will tell us whenever flash is
writable or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Apparently TPL_CALLBACK is too low, code runs into an ASSERT
complaining the new TPL is lower than the old TPL.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4424
In Relaxed-AP Sync Mode, BSP will not wait for all Aps arrive. However,
PerformRemainingTasks() needs to wait all Aps arrive before calling
SetMemMapAttributes and ConfigSmmCodeAccessCheck() when mSmmReadyToLock
is true. In SetMemMapAttributes(), SmmSetMemoryAttributesEx() will call
FlushTlbForAll() that need to start up the aps. So it need to let all
aps arrive. Same as SetMemMapAttributes(), ConfigSmmCodeAccessCheck()
also will start up the aps.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4431
In Ap relaxed mode, some SMI handlers should call SmmWaitForApArrival() to let all ap arrive in SmmCpuRendezvous(). But in traditional mode, these SMI handlers don't need to call SmmWaitForApArrival() again. So it need to be check cpu sync mode before calling SmmWaitForApArrival().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Use debug print level DEBUG_MANAGEABILITY in
RedfishPkg.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Nickle Wang <nicklew@nvidia.com>
Add CpuPageTableLib required by SecCore & CpuMpPei in UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Add CpuPageTableLib required by SecCore & CpuMpPei in OvmfPkg.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
System paging 5 level enabled or not can be checked via CR4.LA57, system
preferred Page table Level (PcdUse5LevelPageTable) must align with previous
level for 64bit long mode.
This patch is to do the wise check:
If cpu has already run in 64bit long mode PEI, Page table Level in DXE
must align with previous level.
If cpu runs in 32bit protected mode PEI, Page table Level in DXE is decided
by PCD and feature capability.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Some security features depend on the page table enabling. So, This
patch is to enable paging if it is not enabled (32bit mode)"
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Background:
For arch X64, system will enable the page table in SPI to cover 0-512G
range via CR4.PAE & MSR.LME & CR0.PG & CR3 setting (see ResetVector code).
Existing code doesn't cover the higher address access above 512G before
memory-discovered callback. That will be potential problem if system
access the higher address after the transition from temporary RAM to
permanent MEM RAM.
Solution:
This patch is to migrate page table to permanent memory to map entire physical
address space if CR0.PG is set during temporary RAM Done.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add a macro USE_5_LEVEL_PAGE_TABLE to determine whether to create
5 level page table.
If macro USE_5_LEVEL_PAGE_TABLE is defined, PML5Table is created
at (4G-12K), while PML4Table is at (4G-16K). In runtime check, if
5level paging is supported, use PML5Table, otherwise, use PML4Table.
If macro USE_5_LEVEL_PAGE_TABLE is not defined, to save space, 5level
paging is not created, and 4level paging is at (4G-12K) and be used.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
In ResetVector, if create page table, its highest address is fixed
because after page table, code layout is fixed(4K for normal code,
and another 4K only contains reset vector code).
Today's implementation organizes the page table as following if 1G
page table is used:
4G-16K: PML4 page (PML4[0] points to 4G-12K)
4G-12K: PDP page
CR3 is set to 4G-16K
When 2M page table is used, the layout is as following:
4G-32K: PML4 page (PML4[0] points to 4G-28K)
4G-28K: PDP page (PDP entries point to PD pages)
4G-24K: PD page mapping 0-1G
4G-20K: PD page mapping 1-2G
4G-16K: PD page mapping 2-3G
4G-12K: PD page mapping 3-4G
CR3 is set to 4G-32K
CR3 doesn't point to a fixed location which is a bit hard to debug at
runtime.
The new page table layout will always put PML4 in highest address
When 1G page table is used, the layout is as following:
4G-16K: PDP page
4G-12K: PML4 page (PML4[0] points to 4G-16K)
When 2M page table is used, the layout is as following:
4G-32K: PD page mapping 0-1G
4G-28K: PD page mapping 1-2G
4G-24K: PD page mapping 2-3G
4G-20K: PD page mapping 3-4G
4G-16K: PDP page (PDP entries point to PD pages)
4G-12K: PML4 page (PML4[0] points to 4G-16K)
CR3 is always set to 4G-12K
So, this patch can improve debuggability by make sure the init
CR3 pointing to a fixed address(4G-12K).
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Combine PageTables1G.asm and PageTables2M.asm to reuse code.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently, page table creation has many hard-code values about the
offset to the start of page table. To simplify it, add Labels such
as Pml4, Pdp and Pd, so that we can remove many hard-code values
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This patch only renames macro, with no code logic impacted.
Two purpose to rename macro:
1. Align some macro name in PageTables1G.asm and PageTables2M.asm, so
that these two files can be easily combined later.
2. Some Macro names such as PDP are not accurate, since 4 level page
entry also uses this macro. PAGE_NLE (no leaf entry) is better
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4200
FspData->PerfIdx is getting increased for every call unconditionally
in the function SetFspMeasurePoint and hence memory access can happen
for out of bound FspData->PerfData[] array entries also.
Example -
FspData->PerfData is an array of 32 UINT64 entries. Assume a call
is made to SetFspMeasurePoint function when the FspData->PerfIdx
last value is 31. It gets incremented to 32 at line 400.
Any subsequent call to SetFspMeasurePoint functions leads to
FspData->PerfData[32] getting accessed which is out of the PerfData
array as well as the FSP_GLOBAL_DATA structure boundary.
Hence keep array access and index increment inside if block only and
return invalid performance timestamp when PerfIdx is invalid.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Acked-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4458
Original code call PeiServicesInstallFvInfoPpi() with NULL for the
FvFormat parameter, then PeiServicesInstallFvInfoPpi() will assume it
use FFS2, then ASSERT if FSP-S/M use FFS3.
Now set the FvFormat to the info got from FvHeader.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Duggapu Chinni B <chinni.b.duggapu@intel.com>
Signed-off-by: Ming Tan <ming.tan@intel.com>
Reviewed-by: S Ashraf Ali <ashraf.ali.s@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Fix incorrect value type issue for checked-box op-code.
When the variable for checked-box is defined as UINT8 in
varstore structure, IFR compiler assign its value type to
EFI_IFR_TYPE_NUM_SIZE_8 instead of EFI_IFR_TYPE_BOOLEAN.
However, the value type for checked-box is boolean value.
Redfish service may return error because of incorrect value
type passed to BIOS attribute registry.
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Pedro Falcato
Sami Mujawar
Neil Jones
Gerd Hoffmann
Zhihao Li
Abner Chang
Jiaxin Wu
Zhiguang Liu
Ranbir Singh
Tan, Ming
Nickle Wang