REF: https://bugzilla.tianocore.org/show_bug.cgi?id=380
gEfiTcgProtocolGuid dependency was added in TcgSmm.
But gEfiTcg2ProtocolGuid dependency is missing in Tcg2Smm.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=244
Currently, when software HashLib (HashLibBaseCryptoRouter) and related
HashInstanceLib instances are used, PcdTcg2HashAlgorithmBitmap is
expected to be configured to 0 in platform dsc.
But PcdTcg2HashAlgorithmBitmap has default value 0xFFFFFFFF in
SecurityPkg.dec, and some platforms forget to configure it to 0 or
still configure it to 0xFFFFFFFF in platform dsc, that will make final
PcdTcg2HashAlgorithmBitmap value incorrect.
This patch is to add CONSTRUCTOR in HashLib (HashLibBaseCryptoRouter)
and PcdTcg2HashAlgorithmBitmap will be set to 0 in the CONSTRUCTOR.
Current HASH_LIB_PEI_ROUTER_GUID HOB created in
HashLibBaseCryptoRouterPei is shared between modules that link
HashLibBaseCryptoRouterPei.
To avoid mutual interference, separated HASH_LIB_PEI_ROUTER_GUID HOBs
with gEfiCallerIdGuid Identifier will be created for those modules.
This patch is also to add check in HashLib (HashLibBaseCryptoRouter)
for the mismatch of supported HashMask between modules that may link
different HashInstanceLib instances, warning will be reported if
mismatch is found.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
All the event log entry in TCG2 Event log format should be TCG_PCR_EVENT2
except event log header. Defined by TCG EFI Spec 2.0 00.13
https://trustedcomputinggroup.org/wp-content/uploads/EFI-Protocol-Specification-rev13-160330final.pdf
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=338
Update the Tpm12CommandLib to consistently check the returnCode
field of a response packet. These checks are missing from the
GetCapability and SelfTest commands. The functions
Tpm12ContinueSelfTest(), Tpm12GetCapabilityFlagPermanent(), and
Tpm12GetCapabilityFlagVolatile() are updated to verify that the
response returnCode is not an error.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec
00.21.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Measure DBT into PCR[7] in initial measurement phase according
to TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Update PCR[7] measure logic according to TCG PC Client PFP 00.37.
Only entries in DB that is used for image authentication need to be
measured.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add PlatformClass info into TPM2 ACPI table, it is only valid with table
Rev 4 and later.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=288
gEfiSecurityPkgTokenSpaceGuid.PcdTcgPhysicalPresenceInterfaceVer was
introduced to configure physical presence interface version. but test
or user needs to build different images to support different versions
separately as the PCD does not support Dynamic types.
This patch is to extend the PCD to support Dynamic types and add a
setup option in Tcg2ConfigDxe driver to configure the physical
presence interface version, the PCD needs to be DynamicHii type and
maps to the setup option.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Update HID patch logic. NOOP in ASL template may cause syntax error when
disassembled and recompiled.
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add PublicKeyDataLength check to be multiple SHA256_DIGEST_SIZE
to avoid caller make mistake, or platform mis-configuration.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Qin Long <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Current options only have TPM 1.2 and TPM 2.0,
but help shows Disable, TPM1.2, or TPM2.0,
they are mismatched.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tcg2ConfigDxe has no related code to handle BlockSID related actions
that have been covered by OpalPasswordDxe driver.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Update the implementation to use PP BlockSID related actions.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Then Tcg2PhysicalPresenceLib can support TCG2 PP TPM2,
storage management and vendor specific requests according
to Physical Presence Interface Specification.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
New solution for this issue will be provided.
This reverts commits from d1947ce509
to bda034c34d.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
The logic in functions ReadAndMeasureVariable() and MeasureVariable()
within Tcg2Dxe ensure that 'VarData' will not be NULL before calling
TcgDxeHashLogExtendEvent() at line 1716.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Add ASSERT to make sure 'ByteSeq' is not NULL before comsumed by
CopyMem().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Change callback handler type to avoid saving PSID info in
browser temp buffer. Also clean the buffer after using it.
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
The BlockSID actions not has code related to
them. Now we implement the BlockSID feature in
OpalPasswordDxe driver. So remove these actions
here.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Update the implementation, use physical presence defined actions to
update the BlockSid related status.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
After enable storage related actions in the
TcgPhysicalPresenceStorageLib, use this library to support
storage related actions in this driver.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
After enable storage related actions in the
TcgPhysicalPresenceStorageLib, use this library to support
storage related actions in this library.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
After enable storage related actions in the
TcgPhysicalPresenceStorageLib, use this library to support
storage related actions in this library.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
After enable storage related actions in the
TcgPhysicalPresenceStorageLib, use this library to support
storage related actions in this library.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Tcg Physical Presence spec defined some actions used
for storage device. Add Smm version library to handles
these actions.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Tcg Physical Presence spec defined some actions used
for storage device. Add Dxe version library to handles
these actions.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Add comments into LogHashEvent() to describe the usage
of GetDigestListSize (DigestList).
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current code uses GetDigestListSize(DigestList) to get
digest list size, that is incorrect.
The code should get digest list size of digests copied
into event2 log, those digests are compacted, so
GetDigestListBinSize() should be used.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
To make the description more clear, update the description
for parameter Buffer of GetDigestListSize() to
"Buffer to hold copied TPML_DIGEST_VALUES compact binary.".
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by : Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current IsHashAlgSupportedInHashAlgorithmMask is only an internal
function, this patch makes it external for coming consumer.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by : Chao Zhang <chao.b.zhang@intel.com>
In CopyDigestListToBuffer() of Tpm2CommandLib, the count in returned
Buffer should be real copied DigestList count.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This PCD is similar to PcdRsa2048Sha256PublicKeyBuffer.
It provides trusted cert for PKCS7 verification.
It can be used for Recovery and Capsule Update images.
We added warning message for both PcdPkcs7CertBuffer and
PcdRsa2048Sha256PublicKeyBuffer. The default value is only for
test purpose.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Changes includes:
1.Check SMM device list before update it to avoid duplicate creation.
2.Clean up the configuration buffer before use it in S3 resume phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Several issues exist in TCG2 PP
1. TCG2 PP use NVS PPRQ/PPRM as PP parameter as well as current
PP state cache. But it doesn't handle PP set failure case
2. TCG2 PP Submit TPM Operation Request to Pre-OS Environment forgets
to clean PPRM
3. Potential alignment issue
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Add a new field in TcgNVS for PP operation user confirmation status,
instead of previous logic overriding Request. Previous logic causes
Get Pending TPM Operation Requested sub function return wrong value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Current TCG2 implementation will set Tpm2HashMask PCD value according to TPM2
PCR bank. However, there might be misconfiguration in BIOS build phase.
The enhanced logic makes sure that the current PCR allocations, the TPM
supported PCRs, and the PcdTpm2HashMask are all in agreement.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch extracts function Tpm2GetCapabilitySupportedAndActivePcrs()
from drivers and also update Tcg2ExecutePhysicalPresence() to call
Tpm2GetCapabilitySupportedAndActivePcrs() instead of
Tcg2Protocol->GetCapability to query the TPM to determine which
hashing algorithms are supported.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function CopyDigestListToBuffer() from
drivers to library with HashAlgorithmMask parameter added to
make the interface more applicable.
The related function IsHashAlgSupportedInHashAlgorithmMask()
is also moved from drivers to library as internal function.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function GetDigestListSize() from
drivers to library and no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Update the return status description and use OUT identifier instead of
IN for Digest parameter, no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function Tpm2GetDigestFromDigestList() from
drivers to library as GetDigestFromDigestList() and no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function Tpm2CommandAllocPcr() from
DxeTcg2PhysicalPresenceLib.c to Tpm2CommandLib as Tpm2PcrAllocateBanks()
and no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
PiDxeS3BootScriptLib will be updated to consume PciSegmentLib
instead of PciLib to support multiple PCI segment.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This commit removes the internal implementation of the function
InternalIsZeroBuffer(). Instead, it will use the API IsZeroBuffer() from
BaseMemoryLib in MdePkg.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2 steps are used to create/delete a time based variable.
For create
step 1: Insert Signer Cert to CertDB.
Step 2: Insert Payload to Variable.
For delete
step 1: Delete Variable.
Step 2: Delete Cert from CertDB.
System may breaks between step 1 & step 2, so CertDB may contains useless
Cert in the next reboot. AuthVariableLib choose to sync consistent state
between CertDB & Time Auth Variable on initialization. However, it doesn't
apply Time Auth attribute check. Now add it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
In current code, PSID is processed as string and the length is 0x20.
Current code only reserved 0x20 length buffer for it, no extra buffer
for the '\0'. When driver call UnicodeStrToAsciiStrS to convert PSID,
it search the '\0' for the end. So extra dirty data saved in PSID
info which caused PSID revert action failed. This patch reserved
extra 1 byte data for the '\0'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Physical Presence state reporting is constrained by physical presence caching in variable driver. For example, reporting must be prior to Physical Presence caching. Physical Presence state becomes constant rather than instant after caching. Therefore, PlatformSecureLib is responsible for reporting Physical Presence state in expected way.
This reverts commit 90fa53213e.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
The input PeImage in HashPeImage() has been checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use BasePeCoffLib PeCoffLoaderGetImageInfo() to check the PE/COFF image.
In V2, add specific ImageRead() to make sure the PE/COFF image content
read is within the image buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use BasePeCoffLib PeCoffLoaderGetImageInfo() to check the PE/COFF image.
In V2, add specific ImageRead() to make sure the PE/COFF image content
read is within the image buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Use BasePeCoffLib PeCoffLoaderGetImageInfo() to check the PE/COFF image.
In V2, add specific ImageRead() to make sure the PE/COFF image content
read is within the image buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
EdkII not allow to use #if in source code, also
the code in it already unused. so just remove this
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
SubmitCommand() was checking the buffer size for ">=" Max size. This would
cause code to fail with "EFI_INVALID_PARAMETER" if a buffer was passed
that was the "max" size as indicated by the GetCapability() command.
Change to ">" to allow for maximum buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bret Barkelew <brbarkel@microsoft.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This is an incompatible change. It uses PcdUserPhysicalPresence value instead
of hard code TRUE. Because PcdUserPhysicalPresence default value is FALSE,
this patch changes UserPhysicalPresent() return value from TRUE to FALSE.
From Security point, it is not safe to always return TRUE. If user wants this
behavior, he can still configure PcdUserPhysicalPresence value to TRUE in
the platform DSC file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
This PCD supports all configuration type. Its default value is FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
AuthVariableLib is updated to cache the UserPhysicalPresent state to global variable. This avoids calling PlatformSecureLib during runtime and makes PhysicalPresent state consistent during one boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
For current implementation, if the device is pyrite type, driver
will suppress the "keep user data" option. Base on the feedback
from user, they prefer to keep the menu but gray out it. Now base
on this feedback to update the driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
TCG PC Client PTP spec defines that if InterfaceType is defined as TIS1.3. All the other fields of the FIFO Interface Identifier Register are skipped.
http://www.trustedcomputinggroup.org/pc-client-specific-platform-tpm-profile-for-tpm-2-0-v43-150126/
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Make TCG2 PP version configurable to meet different request. Current default version is 1.3.
http://www.trustedcomputinggroup.org/physical-presence-interface_1-30_0-52/
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
TcgDxePassThroughToTpm should be able to handle all TPM12 Command & Response correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
SecurityPkg\VariableAuthenticated\EsalVariableDxeSal\Variable.c
AutoUpdateLangVariable()
Global->PlatformLangCodes[VirtualMode] = AllocateRuntimeCopyPool
(DataSize, Data);
ASSERT (mVariableModuleGlobal->PlatformLangCodes[VirtualMode] != NULL);
The patch is to use Global instead of mVariableModuleGlobal in the
ASSERT (XXX) to make code more clear although mVariableModuleGlobal is
equal to Global actually.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Enhance the error handling:
1. When the device is unlocked at BIOS phase and system does a warm reboot,
the device may be still in unlock status if it uses external power. For
such case, we would still popup password window to ask user input. If
user presses ESC key here, we would force the system shut down or ask
user input again to avoid security hole.
2. When user reach max retry count, force shutdown.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Make the implementation of RouteConfig/ExtractConfig function
follow the UEFI spec.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
For Pyrite SSC device, it may not supports Active Key, So
add check logic before enable it.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch is used to cleanup unused structure
definition.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
The BlockSid feature is not depend on lock status,
so move the send BlockSid command out of unlock process.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
BlockSid feature can be retrieve from the header info.
Update the logic, check BlockSid capability before use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Not all opal device support BlockSid feature. So Add
code logic to check the capability before send BlockSid
command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The BlockSid feature is a global level feature instead
of device level feature. So move the menu from device page
to the main page.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Check the BlockSid feature capability through check
BlockSid header in the DiscoveryHeader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The ComId for Block SID authentication command is
0x0005 according to "TCG Storage Feature Set: Block
SID Authentication Specification Version 1.0.0". Update code to
follow this spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Disable SecureBoot Enable/Disable feature when PhysicalPresence is not available,
Since SecureBootEnable is protected with PhysicalPresence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Change design to always install opal menu.
Current implementation only install menu when device connect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Remove SecureBoot UI support for Customized SecureBoot Mode transition according to Mantis 1263.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 96832eefea
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Remove Customized SecureBoot Mode transition logic for Mantis 1263, including AuditMode/DeployedMode/PK update management.
Also remove image verification logic in AuditMode.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 4fc08e8d68
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Remove gEdkiiSecureBootModeGuid definition for Customized Secure Boot feature defined in
UEFI2.5 Mantis 1263. It is a private variable GUID.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: af9af05bec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Update the TCG Spec in the the EFI_TCG_SERVER_ACPI_TABLE from TCG 1.0 to
TCG 1.2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reduce several DEBUG messages verbosity from INFO to VERBOSE, so that will not see debug message around each driver loading when TPM 2.0 part present.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Fix Tpm12NvWriteValue() command/response length byte order.
Tpm12SubmitCommand() was using the value from Command.Hdr.paramSize
which was swapped to be Big Endian, but the function was
expecting it in UINT32 Little Endian
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add DEBUG messages for TPM12Startup to distinguish between TPM_SUCCESS
and
TPM_INVALID_POSTINIT. This helps debugging some hardware problems.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Add DEBUG messages for TPM2Startup to distinguish between TPM_RC_SUCCESS
and TPM_RC_INITIALIZE. This helps debugging some hardware problems.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
This patch enhance OPAL password SMM driver to check SMM bar is valid MMIO
besides outside of SMRAM.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance OPAL password lib SMM communication by using fixed
SMM communication buffer.
Update OPAL password lib to consume EDKII_PI_SMM_COMMUNICATION_REGION_TABLE
as fixed communication buffer for SMM communication.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In image verification, if image verified pass in DBT, still need to verify if it is blocked by any other cert/cert hash from DBX.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Dick Wilkins <dick_wilkins@phoenix.com>
Revert previous fix in AuthVariable driver init which breaks SecureBootEnable original behavior. Add more error handling logic in SecureBootConfigDxe to prevent wrong display info when SecureBootEnable & PK inconsistency happens.
Commit hash for the reverted patch in AuthVariable driver is
SHA-1: a6811666b0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According to current Pyrite SSC Spec 1.00, there is no parameter
for RevertSP method. So suppress KeepUserData option for the
Pyrite Ssc type device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Check the pointer before use it to make the code more safely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
TempBuf in SetupEventLog needs to include sizeof(UINT32) to hold NumberOfAlgorithms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
This driver used to unlock device in S3 resume phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This driver used to enables opal feature in bios.
It adds setup menu and unlock device process in boot phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
APIs used to support opal password solution to trig opal command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Library APIs used to create commands defined by TCG storage opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
APIs used to create commands defined by TCG storage core spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The type casting in the ChooseFile is not necessary and it actually
hid the incompatible handlers from the compiler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The SecureBootConfig now uses ChooseFile() from FileExplorerLib
to select the certificates to be enrolled into PK, KEK, DB, DBX,
or DBT, and the corresponding handlers to get the content of the
file. Per the definition of CHOOSE_HANDLER, the handler must use
EFIAPI as the calling convention. However, the calling convention
was not specified the following handlers: UpdatePKFromFile(),
UpdateKEKFromFile(), UpdateDBFromFile(), UpdateDBXFromFile(), and
UpdateDBTFromFile(). When compiling the firmware with gcc, the
default calling convention is not compatible with EFIAPI, so the
handlers interpreted the argument the wrong way and passed the
wrong device path to UpdatePage(), and the system crashed when
the user tried to enroll a certificate into the key database.
This commit specifies the calling convention for those functions
so that gcc can generate the right code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Some commands in DxeTcg2PhysicalPresenceLib accept
AuthSession as input parameter and copy to local
command buffer. After use, this AuthSession content
should be zeroed, because there might be some secrete
there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Tpm2Ptp.c is library, but it miss Tpm2 prefix for
IsPtpPresence() and GetPtpInterface(). There might
be risk as name symbol conflict. This patch adds Tpm2
prefix for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Tested-by: "Wu, Hao A" <hao.a.wu@intel.com>
Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction()
has check if current request is same as previous.
But it forget check RequestParameter, which causes
second request fail to process, if RequestParameter
is different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
The function AllocateCopyPool may return NULL, so need to do check
after calling it. This patch is to enhance the related logic.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Using existing library FileExplorerLib to replace the same
logic in SecureBootConfigDxe to make the code clear. After using
FileExplorerLib, the UI behavior for enroll PK will change,
previously when select one PK file, commit/discard changes will
return to Device Manager,press ESC will return to FileExplorer.
Now using FileExplorerLib the behavior will keep same with
enroll KEK/DB/..., commit/discard changes will return to Custom
Secure Boot Options form and ESC will return to PK options form.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
TPM state string update requires HiiHandle which may not be initialized when calling ExtractConfig.
Move this logic to CallBack function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Add a new cert data base "certdbv" to store signer certs for volatile time based
Auth variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19786 6f19259b-4bc3-4df7-8a09-765794883524
1) NvPublic.dataSize data should be got from original
receive buffer, instead of returned NvPublic.
2) NvNameSize means the size of NvName without size field.
The original code treats it to be size of NvName with size
field, so the last 2 bytes are missing.
This patch fixed problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19756 6f19259b-4bc3-4df7-8a09-765794883524
Previously, we only add PTP detection in Tpm12RequestUseTpm,
because RequestUseTpm does not check TPM command.
This patch also adds similar check in Tpm12SubmitCommand.
PTP device does not accept TPM12 command, so that it can
return error on PTP device, instead of wait till timeout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19755 6f19259b-4bc3-4df7-8a09-765794883524
This patch add PTP CRB support in BIOS Setup.
It can:
1) Display the PTP capability (TIS/FIFO/CRB)
2) Display the PTP current interface (TIS/FIFO/CRB)
3) Let user select CRB/FIFO, if supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19743 6f19259b-4bc3-4df7-8a09-765794883524
The TPM RequestUseTpm API can only set register to
use the hardware, but it can not be used to distinguish
TPM12 or TPM2 device.
TPM PTP defines same address with TIS, so we need
detect the TPM device is PTP or TIS in RequestUseTpm.
Also, Tcg2Config driver call RequestUseTpm to detect
TPM hardware device. So we have to add check here.
There is no need to support PTP CRB style SubmitCommand(),
because TPM2 device can not accept TPM12 style command.
This patch also uses TpmTis.h instead of duplicate
definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19742 6f19259b-4bc3-4df7-8a09-765794883524
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original ACPI table only
handles PTP FIFO/TIS interface. This patch adds
PTP CRB interface support.
The current logic is that SMM driver will runtime
detect TPM device interface (CRB or FIFO/TIS) and
publish TPM2 table based on result.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19741 6f19259b-4bc3-4df7-8a09-765794883524
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original lib only handles
PTP FIFO/TIS interface. This patch adds PTP CRB
interface support.
The current logic is that lib will runtime detect
TPM device interface (CRB or FIFO/TIS) and call
proper function to access hardware.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19740 6f19259b-4bc3-4df7-8a09-765794883524
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19729 6f19259b-4bc3-4df7-8a09-765794883524
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19728 6f19259b-4bc3-4df7-8a09-765794883524
Add the following APIs that are required by TcgPei and/or TcgDxe to
the Tpm12CommandLib instance:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19727 6f19259b-4bc3-4df7-8a09-765794883524
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19725 6f19259b-4bc3-4df7-8a09-765794883524
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19724 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19723 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19722 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19721 6f19259b-4bc3-4df7-8a09-765794883524
This module only handles MOR lock v1.
Now MOR lock V2 solution is published and added in variable driver. So this module can be deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19691 6f19259b-4bc3-4df7-8a09-765794883524
This patch updated final event log calculation based on
TCG EFI PROTOCOL rev9, 7.1.2 "All options implementation".
The previous logic is to save event to final event log
once GetEventLog() is called. 7.1.1 shows that we should
save event log to both normal even log area and final event
log area after GetEventLog() is called.
And there is no need to record TCG12 format log to final
event log area, and normal event log area can be BootServices
memory because OS will not access it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19661 6f19259b-4bc3-4df7-8a09-765794883524
Previously, NumberOfPCRBanks is calculated based on TPM
capability. However, there might be a case that TPM hardware
support 1 algorithm, but BIOS does not support and BIOS
mask it via PCD. This causes the conflict between
HashAlgorithmBitmap and NumberOfPCRBanks.
So we move the NumberOfPCRBanks calculation based on
HashAlgorithmBitmap to make sure the data is consistent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19660 6f19259b-4bc3-4df7-8a09-765794883524
ExtractConfig is called many times, so it's not efficient to update Secure Boot STR_SECURE_BOOT_STATE_CONTENT, STR_CUR_SECURE_BOOT_MODE_CONTENT string in ExtractConfig.
As these 2 strings are displayed on one form, always update them when opening the form.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19645 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Jiewen Yao
Star Zeng
Zhang Lubo
Zhang, Chao B
Michael Kinney
Hao Wu
Eric Dong
Dandan Bi
Laszlo Ersek
Liming Gao
Giri P Mudusuru
Cinnamon Shia
Jiaxin Wu
Samer El-Haj-Mahmoud
Derek Lin
Gary Lin