CalculateCrc32() bases on the initialized mCrcTable. When CalculateCrc32()
is used, mCrcTable will take 1KB size in the image. When CalculateCrc32()
is not used, mCrcTable will not be built in the image, and no size impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
According to the TCG Platform Reset Attack Mitigation Specification (May
15, 2008):
> 5 Interface for UEFI
> 5.1 UEFI Variable
> 5.1.1 The MemoryOverwriteRequestControl
>
> Start of informative comment:
>
> [...] The OS loader should not create the variable. Rather, the firmware
> is required to create it and must support the semantics described here.
>
> End of informative comment.
However, some OS kernels create the MOR variable even if the platform
firmware does not support it (see one Bugzilla reference below). This OS
issue breaks the logic added in the last patch.
Strengthen the MOR check by searching for the TCG or TCG2 protocols, as
edk2's implementation of MOR depends on (one of) those protocols.
The protocols are defined under MdePkg, thus there's no inter-package
dependency issue. In addition, calling UEFI services in
MorLockInitAtEndOfDxe() is safe, due to the following order of events /
actions:
- platform BDS signals the EndOfDxe event group,
- the SMM core installs the SmmEndOfDxe protocol,
- MorLockInitAtEndOfDxe() is invoked, and it calls UEFI services,
- some time later, platform BDS installs the DxeSmmReadyToLock protocol,
- SMM / SMRAM is locked down and UEFI services become unavailable to SMM
drivers.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1498159
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The "MemoryOverwriteRequestControl" (a.k.a. MOR) variable comes from the
"TCG Platform Reset Attack Mitigation Specification":
https://www.trustedcomputinggroup.org/wp-content/uploads/Platform-Reset-Attack-Mitigation-Specification.pdf
The "MemoryOverwriteRequestControlLock" variable (a.k.a. MORL) is a
Microsoft extension, called "Secure MOR implementation":
https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/device-guard-requirements
Currently the VariableSmm driver creates MORL without regard to MOR. This
can lead to a situation where a platform does not support MOR from the
prerequisite spec (because it does not include the
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf" driver), but appears
to support MORL from the dependent Microsoft spec.
"winload.efi" notices this inconsistency, and disables the Device Guard
Virtualization Based Security in Windows Server 2016 and Windows 10 64-bit
Enterprise.
If the platform includes
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf", then MOR will exist
by the time EndOfDxe is reached, and VariableSmm can safely create MORL.
Otherwise, do not create MORL (delete it if it exists), and also prevent
other modules from creating it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=727
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1496170
Reported-by: Ladi Prosek <lprosek@redhat.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The SetMorLockVariable() function sets "mMorLockPassThru" to TRUE
temporarily, so that it can set the MOR Control Lock variable to
well-formed values without permission checks.
In the next patch, we'll need the same override for deleting the MOR
Control Lock variable; hence obey "mMorLockPassThru" in the deletion
branch of SetVariableCheckHandlerMorLock() as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Introduce the MorLockInitAtEndOfDxe() hook, in order to allow
MorLockInit() to delay / queue operations until EndOfDxe. (Or, if the
platform never signals EndOfDxe, until ReadyToBoot.)
Call MorLockInitAtEndOfDxe() whenever we set "mEndOfDxe" to TRUE:
- in VariableRuntimeDxe:
- in the OnReadyToBoot() function,
- in the OnEndOfDxe() function;
- in VariableSmm:
- on the SMM_VARIABLE_FUNCTION_READY_TO_BOOT SMI request,
- in the SmmEndOfDxeCallback() function.
For now, implement MorLockInitAtEndOfDxe() as a no-op in both
VariableRuntimeDxe and VariableSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The MorLockInit() and SetVariableCheckHandlerMor() functions have separate
implementations for VariableRuntimeDxe (= unprivileged, unified
DXE_RUNTIME driver) and VariableSmm (= privileged, DXE_SMM back-end of the
split variable driver).
Move their declarations from "Variable.c" to "PrivilegePolymorphic.h", so
that the compiler enforce that the declarations and the definitions match.
(All C source files with the call sites and the function definitions
already include "PrivilegePolymorphic.h" via "Variable.h".)
At the same time:
- replace two typos in the MorLockInit() description:
- replace "EFI_SUCEESS" with "EFI_SUCCESS",
- replace "MOR Lock Control" with "MOR Control Lock";
- in the SetVariableCheckHandlerMor() description:
- replace @param with @param[in],
- correct the description of the Attributes parameter (suggested by Star
Zeng <star.zeng@intel.com>),
- rewrap the comment to 80 columns.
This change cleans up commit 2f6aa774fe ("MdeModulePkg: Add MorLock to
variable driver.", 2016-01-19).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
If the platform supports SMM, a gRT->SetVariable() call at boot time
results in the following call tree to SecureBootHook():
RuntimeServiceSetVariable() [VariableSmmRuntimeDxe.c, unprivileged]
SmmVariableHandler() [VariableSmm.c, PRIVILEGED]
VariableServiceSetVariable() [Variable.c, PRIVILEGED]
SecureBootHook() [VariableSmm.c, PRIVILEGED]
//
// do nothing
//
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
And if the platform does not support SMM:
VariableServiceSetVariable() [Variable.c, unprivileged]
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
In other words, the measurement always happens outside of SMM.
Because there are two implementations of the SecureBootHook() API, one
that is called from SMM and does nothing, and another that is called
outside of SMM and measures variables, the function declaration should be
in a header file. This way the compiler can enforce that the function
declaration and all function definitions match.
"Variable.h" is used for "including common header files, defining internal
structures and functions used by Variable modules". Technically, we could
declare SecureBootHook() in "Variable.h". However, "Measurement.c" and
"VariableSmmRuntimeDxe.c" themselves do not include "Variable.h", and that
is likely intentional -- "Variable.h" exposes so much of the privileged
variable implementation that it is likely excluded from these C source
files on purpose.
Therefore introduce a new header file called "PrivilegePolymorphic.h".
"Variable.h" includes this header (so that all C source files that have
been allowed to see the variable internals learn about the new
SecureBootHook() declaration immediately). In "Measurement.c" and
"VariableSmmRuntimeDxe.c", include *only* the new header.
This change cleans up commit fa0737a839 ("MdeModulePkg Variable: Merge
from Auth Variable driver in SecurityPkg", 2015-07-01).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
EFI_BOOT_SCRIPT_WRITE() interface is a var-arg interface.
Spec defines the order of parameters for
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE as below:
typedef
EFI_STATUS
(EFIAPI *EFI_BOOT_SCRIPT_WRITE) (
IN CONST EFI_S3_SAVE_STATE_PROTOCOL *This,
IN UINT16 OpCode,
IN EFI_BOOT_SCRIPT_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
But implementation assumes Segment is in the very end, after Buffer.
Similar spec/implementation gaps are also found for
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE.
The patch fixes the implementation to extract the arguments in
correct order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix a bug to use module's Name attribute as compare for single module
build. ModuleFile.File can't be used to compare INF file, because it
is the relative path.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code logic not check the pointer before use it. This may
has potential issue, this patch add code to check it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Commit 8932679df5 adds an ASSERT for
checking NULL pointer dereference.
The ASSERT added here is for addressing a false positive NULL pointer
dereference issue raised from static analysis.
This commit adds comments to clarify the reason for using ASSERT as the
check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=720
The current implementation assumes there is only one hotplug resource
padding for each resource type. It's not true considering
DegradeResource(): MEM64 resource could be degraded to MEM32
resource.
The patch treat the resource paddings using the same logic as
treating typical/actual resources and the total resource of a bridge
is set to the MAX of typical/actual resources and resource paddings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch adds a library that enables invocation of SVCs from Exception
Level EL0. It will be used by the Standalone MM environment to request
services from a software running in a privileged EL e.g. ARM Trusted
Firmware. The library is derived directly from Arm SMC Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: assign frame pointer (AArch64)
keep stack alignment (ARM)]
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SVCs are in the range 0xC4000060 - 0xC400007f.
The functions available to the secure MM partition:
1. Signal completion of MM event handling.
2. Set/Get memory attributes for a memory region at runtime.
3. Get version number of secure partition manager.
Also, it defines memory attributes required for set/get operations.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch adds a list of function IDs that fall under the standard
SMC range as defined in [1]
SMCs associated with Management Mode are in the range 0xC4000040 -
0xC400005f (64 bit) and 0x84000040 - 0x8400005f (32 bit).
The function(s) available to the normal world:
1. Request services from the secure MM environment using MM_COMMUNICATE.
It also defines MM return codes.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0060a/DEN0060A_ARM_MM_Interface_Specification.pdf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Juno and FVP platform implement the SBSA Watchdog timers.
Added PcdWatchdogCount to specify the number of Watchdog timers
that are available.
This allows configurability and an option to disable the watchdog
timers if required for testing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacked a means to configure the
level/edge properties of an interrupt. The new HardwareInterrupt2
protocol introduced this capability.
This patch updates the GIC drivers to provide the new interfaces.
The changes comprise:
Update to use HardwareInterrupt2 protocol
Additions to register info in ArmGicLib.h
Added new functionality (GetTriggerType and SetTriggerType)
The requirement for this change derives from a problem detected on ARM
Juno boards, but the change is of generic (ARM) relevance.
This commit is in response to review on the mailing list and, as
suggested there, rolls Girish's updates onto Ard's original example.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacks the means to configure
the level/edge and polarity properties of an interrupt. So introduce a
new protocol HardwareInterrupt2, and add some new members that allow
manipulation of those properties.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Parse QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION from the bridges'
conventional config spaces. Translate the fields as follows:
* BusNumbers:
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- reserve the requested value. (NB, bus number reservation
is not supposed to work before
<https://bugzilla.tianocore.org/show_bug.cgi?id=656> is fixed.)
* Io:
* 0 -- no reservation;
* (-1) -- keep our current default (512B);
* otherwise -- round up the requested value and reserve that.
* NonPrefetchable32BitMmio:
* 0 -- no reservation;
* (-1) -- keep our current default (2MB);
* otherwise -- round up the requested value and reserve that.
* Prefetchable32BitMmio:
* 0 -- no reservation, proceed to Prefetchable64BitMmio;
* (-1) -- firmware default, i.e. no reservation, proceed to
Prefetchable64BitMmio;
* otherwise -- round up the requested value and reserve that. (NB, if
Prefetchable32BitMmio is reserved in addition to
NonPrefetchable32BitMmio, then PciBusDxe currently runs into an
assertion failure. Refer to
<https://bugzilla.tianocore.org/show_bug.cgi?id=720>.)
* Prefetchable64BitMmio:
* only reached if Prefetchable32BitMmio was not reserved;
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- round up the requested value and reserve that.
If QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION is missing, plus any
time the rounding fails, fall back to the current defaults.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Extract the SetIoPadding() and SetMmioPadding() functions, so that we can
set EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR fields using parameter names and
values that are more friendly than the original field names and their
expected values.
Introduce the HighBitSetRoundUp32() and HighBitSetRoundUp64() functions
for calculating the last parameter ("SizeExponent") of SetIoPadding() and
SetMmioPadding().
Put the new functions to use when requesting the default reservations. (In
order to be consistent with a later patch, "SizeExponent" is calculated
for SetIoPadding() with HighBitSetRoundUp64().)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PciHotPlugInitDxe has a static variable called "mPadding" (of type
RESOURCE_PADDING), which describes two constant resource reservations:
- MmioPadding: 2MB of non-prefetchable (hence 32-bit) MMIO space,
- IoPadding: 512B of IO space.
In the GetResourcePadding() member function of
EFI_PCI_HOT_PLUG_INIT_PROTOCOL, the driver outputs a dynamically allocated
verbatim copy of "mPadding", for PciBusDxe to consume in its
ApplyResourcePadding() function.
In a later patch, we're going to compose the set of resource reservations
dynamically, based on QEMU hints. Generalize the RESOURCE_PADDING
structure so that we may generate (or not generate) each resource type
individually:
- Replace the named "MmioPadding" and "IoPadding" fields in
RESOURCE_PADDING with an array of descriptors,
- remove "mPadding",
- in GetResourcePadding(), request the same (default) reservations as
before, as if we attempted and failed to fetch the QEMU hints.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The non-prefetchable MMIO aperture of a bridge can never fall outside of
the 32-bit address space. Namely, the MemoryBase and MemoryLimit fields in
PCI_BRIDGE_CONTROL_REGISTER have type UINT16, and based on the PCI-to-PCI
Bridge Architecture Spec, Chapter 3.2, the actual MMIO aperture is
determined as in:
NonPrefetchMemoryBase = (((MemoryBase & 0xFFF0u) >> 4) << 20) | 0x00000
NonPrefetchMemoryLimit = (((MemoryLimit & 0xFFF0u) >> 4) << 20) | 0xFFFFF
In "OvmfPkg/PciHotPlugInitDxe", the
"mPadding.MmioPadding.AddrSpaceGranularity" field is currently initialized
to 64. According to the above, this is useless generality: a
non-prefetchable MMIO reservation may only be satisfied from 32-bit
address space. Update the field to 32.
In practice this change makes no difference, because PciBusDxe already
enforces the 32-bit limitation when it sees "non-prefetchable" from
(SpecificFlag==0). Quoting commit 8aba40b792 ("OvmfPkg: add
PciHotPlugInitDxe", 2016-06-30): "regardless of our request for 64-bit
MMIO reservation, it is downgraded to 32-bit".
(See the Platform Init Spec 1.6, Volume 5,
- Table 8. "ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage", and
- Table 11. "Memory Resource Flag (Resource Type = 0) Usage",
for an explanation of the "mPadding.MmioPadding" fields.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The driver always produces an instance of the
EFI_PCI_HOT_PLUG_INIT_PROTOCOL. The "SOMETIMES_PRODUCES" remark is an
oversight from the original v1->v2 patch update; v2 should have stated
"ALWAYS_PRODUCES":
http://mid.mail-archive.com/1468242274-12686-5-git-send-email-lersek@redhat.com
> Notes:
> v2:
> - drop the PcdPciBusHotplugDeviceSupport check, and the PcdLib
> dependency with it [Jordan]
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QEMU has recently gained the ability to provide various hints about its
PCI bridges. The hints take the form of vendor-specific PCI capabilities.
Define macros and types under "OvmfPkg/Include/IndustryStandard" to
describe these capabilities.
The definitions correspond to "docs/pcie_pci_bridge.txt" in the QEMU tree.
Said documentation was added in the last commit of the following series:
a35fe226558a hw/pci: introduce pcie-pci-bridge device
70e1ee59bb94 hw/pci: introduce bridge-only vendor-specific capability to
provide some hints to firmware
226263fb5cda hw/pci: add QEMU-specific PCI capability to the Generic PCI
Express Root Port
c1800a162765 docs: update documentation considering PCIE-PCI bridge
We are going to parse the Resource Reservation Capability in
OvmfPkg/PciHotPlugInitDxe, and return the reservation requests to
PciBusDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Revision 2.2 of the PCI Spec defines Capability IDs 0 through 6,
inclusive, in Appendix H. It reserves IDs 7 through 255.
Revision 2.3 of the PCI Spec adds Capability IDs 7 through 0xC, inclusive,
in Appendix H. Capability ID 9 stands for "Vendor Specific".
Add the EFI_PCI_CAPABILITY_ID_VENDOR macro and the
EFI_PCI_CAPABILITY_VENDOR_HDR structure type to MdePkg/IndustryStandard,
in order to describe this capability header.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Per PI 1.6 we added an FV Extended Header entry that would contain the
size of the FV that was in use.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to fix an assert issue during booting IA32 platforms
such as OvmfIa32 or Quark. This issue is caused by trying to access
page table on a platform without page table. A check is added to
avoid the assert.
Bug tracker: https://bugzilla.tianocore.org/show_bug.cgi?id=724
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
The debug messages can help developer to know the pre-memory
allocation usage.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=699
Within function AhciModeInitialization(), left shift operations of 'BIT0'
in the following statements:
"if ((PortImplementBitMap & (BIT0 << Port)) != 0) {"
will incur possible out of range left shift when Port is 31, since
"1 << 31" is possible to exceed the range of type 'int' (signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast 'BIT0' with UINT32 to resolve this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=698
Within function NetRandomInitSeed(), left shift a negative value is used
in:
"~Time.Hour << 24"
which involves undefined behavior.
Since Time.Hour is of type UINT8 (range from 0 to 23), hence ~Time.Hour
will be a negative value (of type int, signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit will remove the '~' operator before 'Time.Hour', since it
seems like an implementation choice for generating the seed.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=695
Within function CoreRestoreTpl(), left shift a negative value -2 is used
in:
"while (((-2 << NewTpl) & gEventPending) != 0) {"
which involves undefined behavior.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit refines the code logic to avoid left shifting the negative
value.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current implementation deletes the "BootNext" before calling
any PlatformBootManagerLib APIs, but if system resets in
PlatformBootManagerLib APIs, "BootNext" is not consumed but lost.
The patch defers the deletion of "BootNext" to before booting it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Correct the help message to match that defined in Shell spec.
In 'DISCONNECT -r [-nc]' case, '-r' is not optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Help message of "dh" gives an example to display all handles
with "Image" protocol but actually "LoadedImage" protocol should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace hard-coded machine code with equivalent assembly source code.
Changes tested by checking for machine code equivalence by disassembling
the original and changed code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
V2:
Change function parameter to avoid touch global info in function.
Enhance function name, make it more user friendly
V1:
Refine code to avoid duplicate code to set processor register.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Liming Gao
Laszlo Ersek
Ruiyu Ni
Yonghong Zhu
Eric Dong
Hao Wu
Supreeth Venkatesh
Ard Biesheuvel
Sami Mujawar
Evan Lloyd
Yunhua Feng
Jian J Wang
Star Zeng
Chris Ruffin