For fields outside the buffer length provided, reset any pointers,
which were supposed to be updated by a ParseAcpi() function call to
NULL. This way one can easily validate if a pointer was successfully
updated.
The ParseAcpi() function parses the given ACPI table buffer by a
number of bytes which is a minimum of the buffer length and the length
described by ACPI_PARSER array. If the buffer length is shorter than
the array describing how to process the ACPI structure, then it is
possible that the ItemPtr inside ACPI_PARSER may not get updated or
initialized. This can lead to an error if the value pointed to by
ItemPtr is later used to control the parsing logic.
A typical example would be a 'number of elements' field in an ACPI
structure header which defines how many substructures of a given type
are present in the structure body. If the 'number of elements' field
is not parsed, we will have a dangling pointer which could cause a
problem later.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
FADT parser was checking for reduced ACPI flag incorrectly
leading to incorrect error message if FIRMWARE_CTRL and
X_FIRMWARE_CTRL are both 0.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Add support for revision 3 of System Resource Affinity Table (SRAT).
Decode and dump the new Generic Initiator Affinity Structure.
Validate the Device Handle Type field inside the Generic Initiator
Affinity Structure.
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Tested-by: Sudipto Paul <sudipto.paul@arm.com>
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1965
For function InsertNewGuidNameMapping, it rellocate the
mGuidList with new size
"mGuidListCount+1 * sizeof(GUID_INFO_BLOCK)". That isn't
its purpose and would cause a overflow operation in
"mGuidList[mGuidListCount - 1].xxx = xxx". Its purpose
is to increase 1 block size of mGuidList. Change it to
"(mGuidListCount + 1) * sizeof (GUID_INFO_BLOCK)".
Adjust the coding style of this function.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2379
When a file is saved in the edit command a status message L"%d Lines Wrote"
is displayed. The hexedit command suffers from the same typo.
Change the message to L"%d Lines Written".
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Updated IORT parser to conform to the IO Remapping
Table, Platform Design Document, Revision D, March 2018.
The following structure parsers have been updated:
1. SMMUv3 - added proximity domain and device Id
mapping index.
2. RootComplex - added memory address size limit.
2. PMCG - added page 1 support.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for parsing the ACPI FACS table.
The FADT parser has also been updated as it
links the FACS table using the FIRMWARE_CTRL
or X_FIRMWARE_CTRL fields.
Since the FACS table does not follow the standard
ACPI header, the FADT parser extracts the FACS
signature, length and version fields before invoking
the FACS parser.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Memory Device (Type 17):
- SMBIOSCR00179: update the string for Intel persistent memory
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Memory Device (Type 17):
- SMBIOSCR00178: add new memory device type value (HBM) and new form
factor value (Die)
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Various:
- SMBIOSCR00183: add support for CXL Flexbus
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
System Slots (Type 9):
- SMBIOSCR00184: add PCI Express Gen 4 values
Add the SmBios.h to use the MARCOs or enums.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2300
On some firmwares PlatformLang is set to the local language (e.g. ru-RU),
however there is no Unicode Collation protocol instance that supports it.
As for missing PlatformLang, fall back to the first found instance.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2296
Currently, when 'ls' is run on an entirely empty directory (this
includes not having '.' and '..'), the output is always 'File not
found'. For when not filtering its children, this patch rather
displays the usual header and footer.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2294
EFI_RUNTIME_SERVICES.GetTime() might return an unspecified Timezone,
such as when SetTime() has not been called after the RTC was cut off
power. Consider this case by not attempting Timezone translations for
when it is invalid.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The EDK 1 Shell (available at <https://github.com/tianocore/edk-Shell>)
has a bug in its EFI_SHELL_ENVIRONMENT2.Execute() implementation that
edk2's UefiShellLib has no choice but to work around.
Improve the explanation in the code. Also, document the implicit
EFI_HANDLE -> (EFI_HANDLE*) conversion, which happens implicitly after
dereferencing ParentHandle, with an explicit cast.
In practice, this patch is a no-op.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In the FileBufferSave() function, we invoke ShellCloseFile() if "Directory
Can Not Be Saved".
The ShellCloseFile() function takes a (SHELL_FILE_HANDLE*) parameter
called "FileHandle", and correctly passes the de-referenced (*FileHandle)
to EFI_SHELL_CLOSE_FILE, which takes a SHELL_FILE_HANDLE.
However, FileBufferSave() passes SHELL_FILE_HANDLE to ShellCloseFile(),
not the expected (SHELL_FILE_HANDLE*). Correct it.
This fixes an actual bug that has remained hidden for two reasons:
- pointer-to-VOID converts from/to any pointer-to-object type silently,
- the bug is on an error path which has likely never fired in practice.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The TouchFileByHandle() and IsDirectoryEmpty() functions are passed
SHELL_FILE_HANDLE parameters, and they use those parameters correctly.
However, their parameter lists say EFI_HANDLE.
Spell out the right type in the parameter lists.
In practice, this change is a no-op (because, quite regrettably, both
EFI_HANDLE and SHELL_FILE_HANDLE are specified to be typedefs of (VOID*)).
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The UefiShell*CommandsLib instances have constructor functions that do
something like:
gHiiHandle = HiiAddPackages (...);
...
ShellCommandRegisterCommandName (..., gHiiHandle, ...);
and destructor functions that implement the following pattern:
HiiRemovePackages (gHiiHandle);
The -- semantic, not functional -- problem is that "gHiiHandle" is
declared with type EFI_HANDLE, and not EFI_HII_HANDLE, in all of these
library instances, even though HiiAddPackages() correctly returns
EFI_HII_HANDLE, and HiiRemovePackages() takes EFI_HII_HANDLE.
Once we fix the type of "gHiiHandle", it causes sort of a butterfly
effect, because it is passed around widely. Track down and update all of
those locations.
The DynamicCommand lib instances use a similar pattern, so they are
affected too.
NOTE: in practice, this patch is a no-op, as both EFI_HII_HANDLE and
EFI_HANDLE are typedefs to (VOID*). However, we shouldn't use EFI_HANDLE
where semantically EFI_HII_HANDLE is passed around.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ShellCommandRunConnect() function passes EFI_HANDLE -- (VOID*) --
objects to ConvertAndConnectControllers(), and
ConvertAndConnectControllers() passes those to gBS->OpenProtocol().
Accordingly, ConvertAndConnectControllers() should specify EFI_HANDLE
parameter types, not (EFI_HANDLE*) -- (VOID**) -- types.
This typo is masked because (VOID*) converts to and from any
pointer-to-object type silently.
Note that functionally speaking there is no problem, so this patch does
not change beavior, only cleans up the code.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in ShellPkg which don't have the policy to defer the
execution of the image.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1955
Refer to PCI express base specification Reversion 5.0, Version
1.0, Table 7-33, Supported Link Speeds Vector bit 3 indicate
the speed 16 GT/s and bit 4 indicate the speed 32 GT/s.
Add the support to shell command 'pci ...'.
Change the MaxLinkSpeed other values' result from 'Unknown'
to 'Reserved' to make the result align.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Since TianoCore EDK2 commit d65f2cea36 ("ShellPkg/CommandLib: Locate
proper UnicodeCollation instance") in edk2 the UEFI Shell crashes if EFI
variable PlatformLang is not defined due to dereferencing gUnicodeCollation
gUnicodeCollation (= NULL) in ShellCommandRegisterCommandName().
Furthermore CommandInit() is leaking PlatformLang if
gUnicodeCollation != NULL.
Close the memory leak and use the first UnicodeCollation instance if
PlatfomLang is not defined.
Fixes: d65f2cea36 ("ShellPkg/CommandLib: Locate proper UnicodeCollation
instance")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1941
The two CHAR16 array ChildCountStr and DeviceCountStr is
defined to hold the decimal string data of UINTN. The max
of UINTN is 18446744073709551615 and it contain 20 characters.
So make their size to 21 CHAR16s to hold the string data with
a null-terminate.
UnicodeValueToStringS regard the value input as INT64, and
21 CHARs is enough to hold the lowest value with minus '-'.
Although the value shouldn't be such big.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Linson Augustine <Linson.augustine@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the operation to shift logical left with the function
LShiftU64, which has the same functionality.
The original code causes ShellPkg build failure with build
target"-b NOOPT".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
At latest edk2 version, there is build failure when building ShellPkg
with VS2012x86, which results from uninitialized local variables.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
In IortParser.c ,the variable Index is set but not used in
function DumpIortNodeNamedComponent. This will cause build failure
when building ShellPkg with GCC.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
MadtParser.h and PpttParser.h are actually used but missing INF file,
which will generate warning message when building this package.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2049
ShellPkg\Library\UefiShellLevel2CommandsLib\Cp.c line 104 and
ShellPkg\Library\UefiShellLevel2CommandsLib\Mv.c line 640, the
pointer variable Response may be a NULL pointer. So we should
make sure that it isn't NULL before dereference it.
If Response is NULL that indicates a EFI_OUT_OF_RESOURCES
error, directly return SHELL_ABORTED.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Modify the SRAT parsing logic to prevent reading past the table buffer
length provided.
Check if the Static Resource Allocation Structure's buffer fits in the
SRAT table buffer before its contents are dumped.
Prevent buffer overruns when reading the Static Resource Allocation
Structure's header.
References:
- ACPI 6.3, January 2019, Section 5.2.16
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the PPTT table parsing logic to prevent reading past the ACPI
buffer lengths provided.
Check if the Number of Private Resources specified in the Processor
Hierarchy Node (Type 0) is possible given the Type 0 Structure's buffer
length.
Make sure that the processor topology structure's buffer fits in the
PPTT table buffer before its contents are dumped.
Prevent buffer overruns when reading the processor topology structure's
header.
References:
- ACPI 6.3, January 2019, Section 5.2.29
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the parsing logic to prevent reading past the MADT table buffer
length provided when parsing the Interrupt Controller Structure header.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the IORT table parsing logic to prevent reading past the buffer
lengths provided.
Change DumpIortNodeIdMappings() function's signature and implementation
to simplify buffer overrun prevention. Update all calls to this
function accordingly.
Modify the parser for each type of IORT node such that the offset from
the start of the node's buffer is tracked as the parsing function is
executed. Again, this change helps prevent buffer overruns.
Test that the IORT node buffer fits in the table buffer before the
node's buffer contents are dumped.
References:
- IO Remapping Table (Issue D), Platform Design Document, March 2018
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the GTDT table parsing logic to prevent reading past the ACPI
buffer lengths provided and to make it consistent with other table
parsers. This includes converting the do-while loop in ParseAcpiGtdt()
into a while loop.
Remove a check which ensures that the entire Platform GT Block
Structure buffer has been parsed. The ACPI specification does not ban
from defining buffers which are larger than the size indicated by the
count and sizes of substructures which constitute it.
Change the data type of the Length parameter to the DumpGTBlock()
function to reflect the width of the respective ACPI structure's
field.
References:
- ACPI 6.3, January 2019, Table 5-124
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the DBG2 table parsing logic to prevent reading past the ACPI
buffer lengths provided.
Modify the signature of the DumpDbgDeviceInfo() function to make it
consistent with the ACPI structure processing functions in other
acpiview parsers. Now, the length of the Debug Device Information
Structure is read before the entire structure is dumped.
This refactoring change makes it easier to stop reading beyond the
DBG2 table buffer if the Debug Device Information Structure Buffer
does not fit in the DBG2 buffer.
For processing the first two fields of the Debug Device Information
Structure (to get the length) a new ACPI_PARSER array is defined.
References:
- Microsoft Debug Port Table 2 (DBG2), December 10, 2015
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
For all other bcfg commands the "#" (option number) argument(s) are
treated as hexedecimal values regardless of whether or not they are
prefixed by "0x". This change fixes '-opt' to handle its "#"
(option number) argument consistently with the other commands.
Making this change removes a potential footgun whereby a user that
has been using a number without a "0x" prefix with other bcfg
commands finds that, on using that exact same number with '-opt', it
has this time unexpectedly been interpreted as a decimal number and
they have modified (corrupted) an unrelated load option. For
example, a user may have been specifying "10" to other commands to
have them act on the 16th option (because simply "10", without any
prefix, is how 'bcfg boot dump' displayed the option number for the
16th option). Unfortunately for them, if they also use '-opt' with
"10" it would unexpectedly and inconsistently act on the 10th option.
CC: Jaben Carsey <jaben.carsey@intel.com>
CC: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jonathan Watt <jwatt@jwatt.org>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1970
Update SLIT_ELEMENT() macro to use MultU64x64() to
perform multiplication on 64-bit operands. This is
required to avoid use of an intrinsic on IA32 VS20xx
builds.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Move Performance Monitoring Counter Group (PMCG) node ID mapping count
validation from the core IORT acpiview parser logic to a dedicated
function. Now, the pointer to the validation function is passed to the
IortNodePmcgParser[] ACPI_PARSER array.
This check does not affect the flow of IORT parsing and is limited to
a single table field in scope, therefore, it is better to keep it away
from the code responsible for traversing the table.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Split the Interrupt Controller Structure length validation in the
acpiview UEFI shell tool into two logical parts:
1. Ensuring MADT table parser forward progress.
2. Preventing MADT table buffer overruns.
Also, make the condition for infinite loop detection applicable to
all types of Interrupt Controller Structures (for all interrupt models
which can be represented in MADT). Check if the controller length
specified is shorter than the byte size of the first two fields
('Type' and 'Length') present in every valid Interrupt Controller
Structure.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Minor changes to the SRAT parser code to conform with the EDKII coding
style and to make it consistent with other ACPI table parsers.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
List ParseAcpi() function arguments one per line in order to make this
function call consistent with ParseAcpi() calls in other ACPI table
parsers.
Also, notify the user that XsdtAddress value of 0 results in RSDP
parsing being terminated and that the XSDT table will not be processed.
This effectively means that no more ACPI tables will be parsed because
of this RSDP table content error.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove a call to ParseAcpi() responsible for getting the XSDT table
length. This call is not needed because the ACPI table buffer length is
provided as an input argument to the ParseAcpiXsdt() function.
Modify remaining code to use the AcpiTableLength argument of the
ParseAcpiXsdt() function instead of a global static variable.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Modify the signature of the DumpGasStruct() function to include the
buffer length parameter and to return the number of bytes parsed by
the function.
This way it becomes possible to prevent buffer overruns when dumping
Generic Address Structure's (GAS) fields in the acpiview table
parsers.
Update all existing DumpGasStruct() calls in acpiview to add the
length argument.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Replace multple use of literal values for GT Block Timer Frame
count/number validation with a macro definition.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reposition blocks of code to remove redundant forward function
declarations in order to reduce the code size.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1964
If the file begin with single line Feed ('\n'), then
"AsciiChar == '\n' && ((CHAR8*)Buffer)[LoopVar-1] != '\r'"
would cause a underflow. Add this condition
"(AsciiChar == '\n' && LoopVar == 0)" before it to make sure
(LoopVar - 1) would never encounter a underflow.
Same change in Unicode section.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Make the -h command line option a binary flag. Now, colour
highlighting is enabled whenever this flag is set (stateless),
instead of being dependent on previous acpiview command
invocations.
By removing the parameter required with the -h flag the command
line parsing logic becomes simpler.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Remove redundant whitespace characters at the beginning of the strings
describing IORT table field names.
When dumping ACPI table contents, the indentation level for printing
field names is controled using the 'Indent' argument to the 'ParseAcpi'
function. In the IORT acpiview parser, both 'Indent' and extra
whitespace characters are used for indentation, which results in
excess indentation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to the acpiview documentation, the -v flag enables verbose
output and it is set on default.
Moreover, the acpiview UEFI shell tool dumps the same output with
and without this flag set.
Therefore this patch removes the superfluous -v flag from allowed
command line parameters.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Replace the enum defining valid node types in the IORT table with
macros from IoRemappingTable.h.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The current documentation for the acpiview UEFI shell tool states
that the '-c' flag enables consistency checks on ACPI table data.
However, these checks are enabled anyway by default.
This patch keeps ACPI table validation as a default option, but it
makes it possible to turn ACPI table validation off by setting the
newly-introduced '-q' flag. Consequently, the '-c' flag is removed.
The remaining code changes in this patch make a number of consistency
checks optional (but enabled by default):
1. ACPI table field offset mismatch.
2. ACPI table field validation functions provided in the ACPI_PARSER
arrays.
3. Table checksum computation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Print an extra newline character at the end DBG2 table parsing in order
to make the output resemble the one for other ACPI table parsers.
With this change, there is now a blank line between the DBG2 table dump
and the 'Table Statistics' section.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Move printing double newline character ('\n\n') from the beginning of
ACPI table checksum validation message to the end of the raw binary
data dump.
This way acpiview table dump looks similar regardless of whether Table
Checksum is validated or not.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acpiview currently allows displaying help info by specifying both
-? and /? flags. This patch removes /? from valid command line
flags that can be passed to the acpiview tool, as this
flag is not used for such purpose in other UEFI shell commands.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1906
While failed to allocate memory to save the response,
set the input/output parameter 'Response'(VOID **) to
NULL to indicate the failure not only depend on the
returned status.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The ACPI 6.3 specification introduces a 'SPE overflow
Interrupt' field as part of the GICC structure.
Update the MADT parser to decode this field and validate
the interrupt ID used.
References:
- ACPI 6.3 Specification - January 2019
- Arm Generic Interrupt Controller Architecture Specification,
GIC architecture version 3 and version 4, issue E
- Arm Server Base System Architecture 5.0
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1498
This patch fix following bugs in func DisplaySysEventLogData:
1. Log increment (Log = (LOG_RECORD_FORMAT *) (LogData + Offset);)
should happened in the end of while loop, not in the very beginning.
2. DisplaySELTypes function should be used in while loop instead of
DisplaySELVarDataFormatType.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ACPI 6.3 specification introduces support to describe
the ARMv8.1 virtual EL2 timers. This patch updates the GTDT parser
of acpiview to decode the EL2 virtual timer fields.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
NetLib will be moved from MdeModulePkg and NetworkPkg.
So, the module that consumes NetLib need to depend on NetworkPkg.dec.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ID Type Structure (Type 2) inside the Processor Properties
Topology Table (PPTT) has a VENDOR_ID field which identifies the
node vendor. The approved values are listed in the ACPI ID Registry
and they are meant to be interpreted as arrays of ASCII characters.
This change to the acpiview parser for PPTT aims to reflect that.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removed conditional pre-compiling for ARM CPUs because function
ValidateCacheAttributes(..) is based on ACPI PPTT specification.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ACPI 6.2 specification mandates that the Generic Timer (GT) Block
Timer Structures must have a frame number in the range 0-7.
Update the GTDT parser to warn if this condition is violated.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
ExtendedSalBootService.h, ExtendedSalServiceClasses.h and
McaInitPmi.h will be deleted. So remove the Guids defined
in these Protocols. And also remove strings in uni file.
https://bugzilla.tianocore.org/show_bug.cgi?id=1560
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
With Itanium architecture unsupported, gEfiSalSystemTableGuid
and gEfiMpsTableGuid will be no longer used.
https://bugzilla.tianocore.org/show_bug.cgi?id=1560
v2:Withdraw the removal of #include <Guid/Mps.h> and
gEfiMpsTableGuid.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1153
The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1146
Add DSDT and SSDT description in the help information. Depend
on the implement of UefiShellAcpiViewCommandLib, the "acpiview"
command support to show all present type in the system not only
support the listed type in the help information. So change the
help information of this command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Substitute InternalShellCharToUpper with CharToUpper which is a public
function with the same effect.
Remove the implement of InternalShellCharToUpper.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1491
This patch is to update the data type of variable "Offset"
from UINT8 to UINT32 to fix following build issue.
...\Parsers\Pptt\PpttParser.c(193): error C2220:
warning treated as error - no 'object' file generated
...\Parsers\Pptt\PpttParser.c(193): warning C4244: '=':
conversion from 'UINT32' to 'UINT8', possible loss of data
Cc: Krzysztof Koch <krzysztof.koch@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Added the acpiview parser for the PPTT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Add a function to return a clean, fully-qualified version of some path.
This function handles a (possibly "dirty") input path that may or may
not include a file system reference.
If it does not include a file system reference, then if the input path
does not begin with a forward or backward slash, then the input path is
relative to the current working directory of the current file system.
Otherwise, it is an absolute path within the current file system.
If it does include a file system reference, it may be a reference to the
current or some other file system. If the file system reference is not
immediately followed by a forward or backward slash, then the input path
is relative to the current working directory of the given file system.
Otherwise, it is an absolute path within the given file system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1236
When "dmem" runs without additional arguments, it dumps the memory
content of EFI_SYSTEM_TABLE. But today's implementation dumps 512
bytes. It's not correct because sizeof (EFI_SYSTEM_TABLE) is less
than 512, the 512-read causes page fault exception in a heap-guard
enabled environment.
The patch changes the implementation to only dump
sizeof (EFI_SYSTEM_TABLE) bytes for gST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@.com>
ShellPkg-Cd: Ensure all valid cd targets are handled properly
Make sure that PathCleanUpDirectories() is called on all valid targets
of the cd command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCD below is unused, so it has been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellPrintBufferSize
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Update SmbiosView to parse the new definitions which
are introduced in SMBIOS3.2.0
V2:
1. Add structure length check before dump the fileds in
Type 9 and Type 17 in case some fileds are not organized
and reported by drivers.
2. Dump the InterfaceTypeSpecificData in Type 42.
V3:
1. Correct the structure length in Type17.
2. Remove the redundant check "if (PeerGroupCount > 0)" in Type 9.
3. Use the Uint16 filed instead of Bits field in union
MEMORY_DEVICE_OPERATING_MODE_CAPABILITY to dump data.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The issue was found when heap guard is turned on.
PrintLib somehow receives a non-null terminated string in var-arg.
When the PrintLib implementation reads the string it keeps
reading because no null-terminator is met, which triggers the page
fault set by the heap guard.
The issue is caused by a bug in FileBufferPrintLine().
When "edit" opens a binary file, in FileBufferPrintLine(),
the Line->Buffer may start with \x00 \x00, but the Line->Size is
larger than MainEditor.ScreenSize.Column, it causes the PrintLine is
set to an empty string by below call:
StrnCpyS (
PrintLine, BufLen/sizeof(CHAR16), Buffer,
MIN(Limit, MainEditor.ScreenSize.Column)
);
But since Limit (equals to Line->Size) is larger than
MainEditor.ScreenSize.Column, below for-loop doesn't successfully
set the whole PrintLine to all-empty-space.
for (; Limit < MainEditor.ScreenSize.Column; Limit++) {
PrintLine[Limit] = L' ';
}
So after the for-loop, PrintLine is still an empty string.
Later in below call, the PrintLine2 is created based on PrintLine.
ShellCopySearchAndReplace (
PrintLine, PrintLine2,
BufLen * 2, L"%", L"^%", FALSE, FALSE
);
But due to the implementation of ShellCopySearchAndReplace(),
PrintLine2 is untouched and INVALID_PARAMETER is returned.
Finally an uninitialized string is passed to ShellPrintEx()
which causes the #PF exception.
The fix is to reset Limit to StrLen(PrintLine) before for-loop.
So that PrintLine can be converted from an empty string to a
string containing all spaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Today's implementation returns 0 even when compared files are
different.
The patch returns 27 (SHELL_NOT_QUAL) in such case to follow
the shell spec.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Separate variable definition and initialization.
2. Make the variable naming following Edk2 rule.
V2: Remove the updates of guard macros in header files.
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Evan Lloyd <evan.lloyd@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
TrEE is deprecated. We need use Tcg2.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Neither the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL nor the EFI_CPU_IO2_PROTOCOL
impose any restrictions when it comes to the range of valid I/O
addresses. Even so, the 'mm' command in -IO mode refuses to perform
accesses to addresses >= 0xffff.
It is not up to 'mm' to impose this restriction, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Issue:
Reply for first ping packet was getting dropped.
Cause:
Sometimes reply message comes even before trasmit
function returns, hence missing 1st reply
Fix:
Prepare the TxList before calling Transmit function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
After commit 20ddbc133f
* MdeModulePkg/ConSplitter: ReadKeyStrokeEx always return key state
When one physical console supports to report the shift key state,
the key data returned from ConSplitter driver at least carries
the shift key valid bit.
The patch fixes the edit/hexedit to accept Unicode (1) when
the no shift key is pressed or reported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
An ordinary empty directory should contain "." and ".." entries.
When an empty directory even doesn't contain "." or ".." entry,
FileHandleFindFirstFile() may return error status and a NULL
FileInfo.
IsDirectoryEmpty() implementation in Rm.c doesn't consider this
case and the deference of FileInfo->FileName causes page fault
exception because FileInfo is NULL.
The patch checks the return status of FileHandleFindFirstFile()
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
"Compress.h" declares the Compress() function as EFIAPI, but the
definition in "Compress.c" lacks EFIAPI.
GCC toolchains without LTO do not catch this error because "Compress.c"
does not include "Compress.h"; i.e. the declaration used by callers such
as "EfiCompress.c" is not actually matched against the function definition
at build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file. Finally, remove EFIAPI from both declaration and
definition -- this was the original intent of commit c4e74e9b81
("ShellPkg/UefiShellDebug1CommandsLib: Remove unnecessary EFIAPI",
2016-10-09), but it missed the header file.
(Gary meant to address that omission in Oct 2017:
[edk2] [PATCH] ShellPkg/UefiShellDebug1CommandsLib: Remove EFIAPI from
Compress()
http://mid.mail-archive.com/20171026065329.32311-1-glin@suse.com
and Ray reviewed the patch, but then the patch was never committed.)
So do the sync and drop EFIAPI now.
This happens to fix the EFICOMPRESS shell command, when built with GCC for
X64.
Cc: Gary Lin <glin@suse.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: c4e74e9b81
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The below code reads additional one CHAR16 when copying
content from Specific to NewSpecific.
NewSpecific = AllocateCopyPool(
StrSize(Specific) + sizeof(CHAR16), Specific
);
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
When "FOR %a %a IN A B C" is executed,
CurrentScriptFile->CurrentCommand->Data is NULL.
But the code assumes it's not NULL and tries to
deference it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Original code locates the first UnicodeCollation instance in
DXE Core protocol database.
It's not correct considering multiple UnicodeCollation instances
exist in system.
The patch changes logic to find the one that matches the current
system language.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com.
In the for-loop condition of original code, the expression
*CurrentCommand != CHAR_NULL
is put before expression
CurrentCommand < SortedCommandList + SortedCommandListSize/sizeof(CHAR16)
When CurrentCommand walks to the end of string buffer, one more character
over the end of string buffer will be read and then stop.
To fix this issue, just move the last expression to the first one. Because
of short-circuit evaludation of and-expression, the following one
*CurrentCommand != CHAR_NULL
will not be evaluated if the expression before it is evaludated as FALSE.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
UefiShellLevel2CommandsLib (somewhat questionably) calls the
BaseLib-internal function InternalCharToUpper().
This function is declared in "MdePkg/Library/BaseLib/BaseLibInternals.h",
which is not a public library class header. UefiShellLevel2CommandsLib
therefore duplicates the function declaration, but a mistake was made: the
EFIAPI calling convention is not spelled out on the duplicated
declaration. Therefore calls made from UefiShellLevel2CommandsLib will not
match the actual function definition in "MdePkg/Library/BaseLib/String.c",
when GCC/X64 toolchains are used.
One consequence of this is that cross-filesystem copies don't work in the
UEFI shell (see the StrniCmp() function in
"UefiShellLevel2CommandsLib.c"). From the original report:
> FS0:\efi\ubuntu\> cp grubx64.efi fs1:\
>
> cp: The source and destination are the same.
Copy the declaration from "BaseLibInternals.h" to
"UefiShellLevel2CommandsLib.c" verbatim.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Analyzed-by: Thomas Palmer <thomas.palmer@hpe.com>
Analyzed-by: Liming Gao <liming.gao@intel.com>
Ref: http://mid.mail-archive.com/47cd17d8-f022-6ca5-2f52-06a8250f8d14@cran.org.uk
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Rebecca Cran <rebecca@bluestop.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Last check in involved a build error, this patch is to
fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in ShellPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
The previous change in ShellLib: "commit
3d29f8c5e3
* ShellPkg/ShellLib: Constructor doesn't depend on ShellParameters"
resolved the issue when loading dynamic command driver from Shell
environment.
But when dynamic command driver is built into FV and started during
boot, the driver still fails to start because Shell protocol doesn't
exist at that time.
The patch changes ShellLib to:
1. Do not look for Shell and ShellParameters protocol when they are
non-NULL in ShellLibConstructorWorker();
The two protocols are assumed to be set by DynamicCommand.Handler.
When ShellInitialize() is called in DynamicCommand.Handler, this
change can prevent the two protocols to be changed to NULL by
the locating logic.
2. Do not reset the Shell and ShellParameters protocol to NULL in
ShellLibDestructor() when CloseProtocol() fails;
Dynamic command driver needs to set the PcdShellLibAutoInitialize
to FALSE in order to skip the constructor.
Current logic calls ShellLibDestructor() when the PCD is FALSE when
ShellInitialize() is called. The change prevent the two protocols
to be changed to NULL.
The two changes don't impact existing usage case so they are backward
compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So dp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
DpApp.inf is to provide a standalone application.
DpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So tftp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
TftpApp.inf is to provide a standalone application.
TftpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
When ShellLib is linked to a driver producing DynamicCommand
protocol, ShellParameters protocol is set by
DynamicCommand.Handler().
The driver image handle doesn't have ShellParameters protocol
installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
EfiCpuIoWidthUint8 should be used in HMemImageRead and HMemImageSave.
Because CpuIo protocol is now used for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The original code uses PciRootBridgeIo for memory access.
It worked before MdeModulePkg/PciHostBridgeDxe driver was checked in.
But MdeModulePkg/PciHostBridgeDxe adds checks to ensure the MMIO
access request is in the scope of the current RootBridgeIo instance.
It causes "hexeditor -m 0 2" reports error because memory address 0
surely is not in the scope of any RootBridgeIo instance.
In fact only accessing the MMIO space occupied by the RootBridgeIo
can work.
The patch changes hexeditor to use CpuIo for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The original code as below intend to set the character
before last column to CHAR_NULL.
Line[(LastCol % (ARRAY_SIZE (Line) - 1)) - 1] = CHAR_NULL;
But when LastCol % (ARRAY_SIZE (Line) - 1)) equals to 0,
Line[-1] is modified.
We should change to code as below:
Line[(LastCol - 1) % (ARRAY_SIZE (Line) - 1)] = CHAR_NULL;
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Issue :
When storage media is full, tftp was resulting in ASSERT
MdeModulePkg/Core/Dxe/Mem/Page.c, because number of pages
was zero.
Reason:
While doing tftp, function call ShellWriteFile was modifying
FileSize variable. In case of full disk it was coming out to be
Zero.
Fix:
Storage the original filesize in local variable, and use this
variable while freeing the pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
EditorClearLine() assumes the console max column is less than 200.
When the max column is bigger than 200, the code incorrectly
modifies the content out side of Line buffer.
It may cause system hang or reset.
The patch changes the function to print several times when
the max column is bigger than 200.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Existing logic to parse the flags isn't complete and cannot detect
some invalid combinations of flags.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Some developers/QAs complain the color of directory or executable
files is hard to see and suggest to use a more bright color.
I agree with this suggestion so make this patch.
The look and feel is much better now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Issue : We were setting MediaPresent as TRUE (default) and
not checking return status of NetLibDetectMedia().
NetLibDetectMedia() sets MediaPresent FLAG in case of success
only and dont change flag on error.
So, Media State will display as 'Media Present', in case of
error also.
Fix : Check return value of NetLibDetectMedia(), if error then
print "Media State Unknown"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Correct the help message to match that defined in Shell spec.
In 'DISCONNECT -r [-nc]' case, '-r' is not optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Help message of "dh" gives an example to display all handles
with "Image" protocol but actually "LoadedImage" protocol should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=655
V2 change:
Put some strings into the UNI file for localization.
The dump information will include:
a. The type of the partition (Mbr, Gpt or Other);
b. Whether the partition is an EFI System Partition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The current implementation has a typo that maps SmmPciRootBridgeIo
to "PciRootBridgeIo".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch doesn't change any real functionality.
Only the indent width and EOL are changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Krzysztof Koch
Ashish Singhal
Zhichao Gao
Heinrich Schuchardt
Sami Mujawar
Marvin H?user
Abner Chang
Laszlo Ersek
Dandan Bi
Shenglei Zhang
Jonathan Watt
Michael D Kinney
Bret Barkelew
Pierre Gondois
Liming Gao
Ruiyu Ni
Jim.Dailey@dell.com
Fu Siyuan
AlexeiFedorov
chenc2
Jiewen Yao
Ard Biesheuvel
Meenakshi Aggarwal
Jian J Wang
fanwang2
Song, BinX
Huajing Li
Hao Wu