REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The EhcReset(), EhcGetRootHubPortStatus() and EhcDriverBindingStart()
functions need to see whether the host controller (or a specific port on
the host controller) can be accessed, dependent on the controller having
(or the specific port being) an in-use debug port. Because the condition
isn't simple, extract it to a separate function.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit 09943f5ecc ("MdeModulePkg: Skip to manage usb debug port in EDKII
EHCI driver if it's used by usb debug port driver", 2012-04-28) made the
host controller reset in EhcDriverBindingStart() conditional. The intent
was to avoid the reset when
- one of the USB ports on the host controller was a Debug Port, AND
- the Debug Port was in use.
This translates to the following positive condition: reset the controller
only if:
- no USB port on the host controller is a Debug Port, OR
- the Debug Port is not in use.
Commit 09943f5ecc failed to implement the first subcondition, and thus
the result is too strict now (for resetting the host controller). Relax it
to the correct condition.
This issue was found by Steven Shi on QEMU. QEMU's EHCI device model does
not have a Debug Port. In repeated disconnect / connect cycles, the
controller is never reset in EhcDriverBindingStart(), therefore the
devices on the controller are never re-enumerated after a disconnect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1129
Fixes: 09943f5ecc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Steven Shi <steven.shi@intel.com>
The function UsbHcUnlinkMemBlock that is never called
and its related comments have been removed.
It is missed in the patch series according to the log in
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2:Update the title.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
Today's restriction of VGA device is to have only one VGA device
enabled per PCI segment. It's not correct because several segments
may share one IO / MMIO address space.
We should restrict to have one VGA per Host Bridge because each
Host Bridge has its only IO / MMIO address space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
The patch doesn't change any behavior of this function.
It just renames the function to LocateVgaDevice() and renames
some parameters and local variables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The function SdPeimUnlinkMemBlock that is never called
has been removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'SdPeimUnlinkMemBlock'
within function SdPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The function EmmcPeimUnlinkMemBlock that is never called
has been removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'EmmcPeimUnlinkMemBlock'
within function EmmcPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The function DisableKeyboard that is never called
has been removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are PeiHubSetHubFeature,IsPortConnectChange and
PeiUsbClearDeviceFeature.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UsbHubCtrlSetHubFeature,UsbHubCtrlResetTT,UsbHcReset,
UsbHcAsyncIsochronousTransfer,UsbHcGetState,UsbHcSetState and
UsbHcIsochronousTransfer.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are PeiUsbSetConfiguration,PeiUsbSetDeviceAddress,
IsPortConnect,IsPortConnectChange,IsPortLowSpeedDeviceAttached
and PeiUsbGetDescriptor.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UfsClearFlag and UfsFindAvailableSlotInTmrl.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UfsPeimUnlinkMemBlock,UfsPeimRequestSense,
UfsPeimInquiry,UfsRwAttributes,UfsClearFlag,UfsReadFlag
and UfsFindAvailableSlotInTmrl.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'UfsPeimUnlinkMemBlock'
within function UfsPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are XhcPeiReadDoorBellReg and UsbHcUnlinkMemBlock.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are XhcReadDoorBellReg and XhcWriteOpReg16.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are IoMmuFreeBuffer,DelinkMemoryBlock,IsMemoryBlockEmptied
,IsTDLinkPtrQHOrTD,GetCurrentFrameNumber,GetQHHorizontalLinkPtr
and GetQHHorizontalValidorInvalid.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are SdCardGetCsd and SdCardGetScr.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The functions that are never called have been removed.
They are UpStreamBridgesAttributes and GetHpcPciAddressFromRootBridge.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are ReadNvmeAdminSubmissionQueueBaseAddress,
ReadNvmeAdminCompletionQueueBaseAddress and ReadNvmeAdminQueueAttributes
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The functions that are never called have been removed.
They are EhcDumpRegs,EhcDisableAsyncSchd and EhcDisablePeriodSchd
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are AhciCheckDeviceStatus,AhciPortReset,DRDYReady,
DRDYReady2,WaitForBSYClear2 and AtaSoftReset.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: DRDYReady, DRDYReady2, WaitForBSYClear2 and AtaSoftReset
are added to the commit message.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When cleaning the PciIoDevice, also free the BusNumberRange
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Use compare logic in if condition to fix ECC issue.
It is caused by aa4240edff.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Current code calculates ChannelCount based on CAP(NP) value.
It only works when the ports implemented number are <= CAP(NP),
for example, platform has CAP(NP) = 5 (means 6 ports) and ports
implemented are 0, 1, 2, 3, 4 and 5.
But we have some platform that has CAP(NP) = 1 (means 2 ports) and
ports implemented are 1 and 2, and has no port 0 implemented, then
current code does not work.
This patch updates the code to calculate ChannelCount based on PI value.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Hong-chihX Hsueh <hong-chihx.hsueh@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Hong-chihX Hsueh <hong-chihx.hsueh@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=916
Within function AtaAtapiPassThruStart():
Add missing NULL pointer check for variable 'Instance' under the
'ErrorExit' code logic.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
Bug 973 just mentions UsbBusDxe, but UsbBusPei has similar issue.
HUB descriptor has variable length.
But the code uses stack (HubDescriptor in PeiDoHubConfig) with fixed
length sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (12) for SuperSpeed path.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
HUB descriptor has variable length.
But the code uses stack (HubDesc in UsbHubInit) with fixed length
sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (32 that is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR)) for SuperSpeed path, then there will
be stack overflow when IOMMU is enabled because the Unmap operation
will copy the data from device buffer to host buffer.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
The definition EFI_USB_SUPER_SPEED_HUB_DESCRIPTOR is wrong (HubDelay
field should be UINT16 type) and no code is using it, the patch
removes it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=256
This commit adds the PEI BlockIo support for NVM Express devices.
The driver will consume the EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI for NVM
Express host controllers within the system. And then produces the
BlockIo(2) PPIs for each controller.
The implementation of this driver is currently based on the NVM Express 1.1
Specification, which is available at:
http://nvmexpress.org/resources/specifications/
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SATA controller driver crashes while accessing the
PCI memory [AHCI Base Registers (ABAR)], as the PCI memory
space is not enabled.
Enable the PCI memory space access to prevent the SATA
Controller driver from crashing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch doesn't have functionality impact. It is just to make
VS2010/VS2012 happy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Per PI spec, the Length value is the length of the ACPI descriptor
in bytes, excluding the first two fields.
The patch fixes the code to report the correct descriptor length
by excluding 3-byte first two fields.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Similar to commit 9dca2105ad, lower the
priority of the DEBUG print in SDReadWrite() to DEBUG_BLKIO.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=980
Adjust the DEBUG prints within function:
NvmeRead(), NvmeWrite(), AsyncNvmeRead() and AsyncNvmeWrite()
to DEBUG_BLKIO for the consistency with other storage device drivers
(e.g. ATA, USB and etc.).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Lower the priority of the DEBUG print in EmmcReadWrite(), which
is emitted for each read or write operation to the eMMC device,
which clutters up the log output of builds created with DEBUG_INFO
enabled.
Suggested-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds support to certain devices that support PUIS (Power
up in Standby).
For those devices that supports SET_FEATURE spin up, SW needs to
send SET_FEATURE subcommand to spin up the devices.
For those devices that doesn't support SET_FEATURE spin up, SW needs
to send read sectors command to spin up the devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Per PCIE spec, Memory Write and Invalidate is hardwired to 0b so
PciBus driver shouldn't write 1b to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
CreatePciIoDevice() detects whether the PCI device is a PCI Express
device and remembers the device type in PciIoDevice->IsPciExp.
RegisterPciDevice() detects the device type again which is
unnecessary. The detection logic can be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Current code assumes the max bus(0xFF) is under this P2P bridge and
temporarily set it as subordinate bus.
It may cause silicon hangs during PCI enumeration in some specific
case.
Instead, it should get the max bus number from the bus number
resources returned from
PCI_HOST_BRIDGE_RESOURCE_ALLOCATION.StartBusEnumeration() and set it
as subordinate bus.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
RootBridgeIo.PollMem()/PollIo() originally don't count the IO/MMIO
access overhead when delaying.
The patch changes the implementation to count the access overhead
so that the actually delay equals to user required delay.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=937
In NvmeExpressPassthru.c near line 659:
Prp = NvmeCreatePrpList (
PciIo,
PhyAddr,
EFI_SIZE_TO_PAGES(Offset + Bytes) - 1,
&PrpListHost,
&PrpListNo,
&MapPrpList
);
if (Prp == NULL) {
goto EXIT;
}
Status is not set to an error code - Status is initialized to
EFI_SUCCESS, or set by a PciIo->Map to EFI_SUCCESS above this
code. This error path should set Status to an error code before
goto EXIT.
Change-Id: I8a5cdf981aa609534c205d3676395805ac60a003
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS
set to 128 because the block size of some USB devices are exceeded
512, like some virtual CD-ROM from BMC, the block size is 2048.
So,the count blocks to transfer should be calculated by block
size of the USB devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
changes shell edit and hexedit to read input through SimpleTextInEx.
It exposes a issue in UsbKeyboard driver:
Per UEFI Spec,
When interpreting the data from this function (ReadKeyStrokeEx), it
should be noted that if a class of printable characters that are
normally adjusted by shift modifiers (e.g. Shift Key + "f" key) would
be presented solely as a KeyData.Key.UnicodeChar without the
associated shift state. So in the previous example of a Shift Key +
"f" key being pressed, the only pertinent data returned would be
KeyData.Key.UnicodeChar with the value of "F".
UsbKeyboard driver does convert Shift Key + "f" to "F" without the
shift state. But it doesn't do the conversion for all printable
characters, e.g.: Shift Key + "1" --> "!".
The root cause is today's logic to check whether a character is
printable or not is as below:
if ((KeyDescriptor->AffectedAttribute & EFI_AFFECTED_BY_CAPS_LOCK)
!= 0) {
So it only converts Shift + "a"-"z", but doesn't for Shift + "0"-"9",
and Shift + "["...
The patch updates the check logic as below to fix the issue:
if ((KeyDescriptor->Unicode != CHAR_NULL) &&
(KeyDescriptor->ShiftedUnicode != CHAR_NULL) &&
(KeyDescriptor->Unicode != KeyDescriptor->ShiftedUnicode)) {
The above check is TRUE when the character is printable and
it's *really* affected by Shift key.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec 2.7, PciIo->GetBarAttributes should return host
address (CPU view ddress) rather than device address (PCI view
address), and
device address = host address + address translation offset,
so we subtract translation from device address before returning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to UEFI spec 2.7, PciRootBridgeIo->Configuration() should
return host address (CPU view ddress) rather than device address
(PCI view address), so in function GetMmioAddressTranslationOffset we
need to convert the range to device address before comparing.
And device address = host address + translation offset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PCI address translation is necessary for some non-x86 platforms. On
such platforms, address value (denoted as "device address" or "address
in PCI view") set to PCI BAR registers in configuration space might be
different from the address which is used by CPU to access the
registers in memory BAR or IO BAR spaces (denoted as "host address" or
"address in CPU view"). The difference between the two addresses is
called "Address Translation Offset" or simply "translation", and can
be represented by "Address Translation Offset" in ACPI QWORD Address
Space Descriptor (Offset 0x1E). However UEFI and ACPI differs on the
definitions of QWORD Address Space Descriptor, and we will follow UEFI
definition on UEFI protocols, such as PCI root bridge IO protocol and
PCI IO protocol. In UEFI 2.7, "Address Translation Offset" is "Offset
to apply to the Starting address to convert it to a PCI address". This
means:
1. Translation = device address - host address.
2. PciRootBridgeIo->Configuration should return CPU view address, as
well as PciIo->GetBarAttributes.
Summary of addresses used in protocol interfaces and internal
implementations:
1. *Only* the following protocol interfaces assume Address is Device
Address:
(1). PciHostBridgeResourceAllocation.GetProposedResources()
Otherwise PCI bus driver cannot set correct address into PCI
BARs.
(2). PciRootBridgeIo.Mem.Read() and PciRootBridgeIo.Mem.Write()
(3). PciRootBridgeIo.CopyMem()
UEFI and PI spec have clear statements for all other protocol
interfaces about the address type.
2. Library interfaces and internal implementation:
(1). Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
It is easy to check whether the address is below 4G or above 4G.
(2). Addresses in PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode are host
address, for they are allocated from GCD.
(3). Address passed to PciHostBridgeResourceConflict is host address,
for it comes from PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode.
RESTRICTION: to simplify the situation, we require the alignment of
Translation must be larger than any BAR alignment in the same root
bridge, so that resource allocation alignment can be applied to both
device address and host address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Current BLOCK IO API code is using TPL_CALLBACK,
but comment is saying TPL_NOTIFY.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit a662afb5b0.
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change
The above commit fixed the following issue:
When system boots to Shell without CDROM inside USB CDROM drive,
and then user inserts the CDROM with Eltorito file system,
"map -r" cannot show the new ELtorito file system.
The commit caused EFI_MEDIA_CHANGED status returned from
UsbBootDetectMedia().
But that fix exposes another issue:
When issuing ReadCapacity command to certain USB key
(Kingston DataTraveler G3 8GB) after it's hot-plugged, USB device
returns STALL error and RequestSense command returns media changed
sense data. (Most of the USB keys return SUCCESS for ReadCapacity
command after hot-plug.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit 6461344c31.
* MdeModulePkg/UsbMass: Fix hot-plug USB CDROM can't be recognized
UsbBootExecCmd() only calls UsbBootRequestSense() to get sense key
when CMD fails.
When POWER ON (29h) ASC returns from REQUEST SENSE, implementation
should retry the CMD, instead of treating this as a SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In below calling stack:
UsbBootIsUnitReady()
UsbBootExecCmdWithRetry()
UsbBootExecCmd()
UsbBootRequestSense()
When USB CDROM is hot-plugged, UsbBootRequestSense() retrieves sense
key (6 = UnitAttention), additional sense code (29h = Power ON).
But it wrongly maps such sense data to Device Error status.
It causes UsbBootExecCmd() executed again.
In the second time call to UsbBootExecCmd(), UsbBootRequestSense()
retrieves sense key (6 = UnitAttention), additional sense code
(28h = media changed).
The above analysis explains why hot-plug USB CDROM cannot be
recognized after below commit:
SHA1 a662afb5b0
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change,
which removes the media changed status check in UsbBootDetectMedia().
The proper fix to this problem is to map the ASC (additional sense
code 29h) properly to success status so that no second call to
UsbBootExecCmd() is made.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Initialize local variable to suppress warning C4703:
potentially uninitialized local pointer variable.
Both reads (dereferences) of "PciRootBridgeIo" in
PciBusDriverBindingStart() are only reached if
"gFullEnumeration" is TRUE on entry *and* we successfully
open the EfiPciRootBridgeIoProtocol interface.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Invoke the newly introduced SD/MMC override protocol to override
the capabilities register after reading it from the device registers,
and to call the pre/post host init and reset hooks at the appropriate
times.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Within function NvmExpressPassThru():
The data buffer for the below 2 Admin command:
Create I/O Completion Queue command (Opcode 01h)
Create I/O Submission Queue command (Opcode 05h)
are not mapped to the PCI controller specific addresses.
But the current code logic also prevents the below NVM command:
Write (Opcode 01h)
from mapping its data buffer.
Hence, this commit refine the logic to resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per PI spec, the PciEnumerationComplete protocol installation
should be after PciIo installation.
Today's implementation installs the PciEnumerationComplete
after hardware enumeration is completed, but before PciIo
installation.
The change corrects the spec/implementation gap.
The change also benefits certain implementation that depends on
the PciIo handle in PciEnumerationComplete callback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is just a code cleanup with no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When system boots to Shell without CDROM in the USB CDROM drive,
and then user inserts one CDROM with Eltorito file system,
"map -r" cannot show the the new Eltorito file system.
The root cause is when "map" command probes the media change
by calling dummy ReadBlockIo(), UsbMassStorage ReadBlockIo()
contains a bug that ignores the media change status:
UsbBootDetectMedia() ignores the EFI_MEDIA_CHANGED status
returned from UsbBootIsUnitReady(), in consequence, the
BlockIo protocol re-installation logic doesn't run.
By checking the code change history, below commit
SHA-1: 19bc852765
* remove unnecessary retry logic from usb mass storage driver.
adds the code to skip EFI_MEDIA_CHANGED status.
Talking with the original committer Tian Feng, he said the
change was just a code cleanup, not for a special bug fix.
So I revert part of the patch, only keep the change that
removes unnecessary retry logic. It can fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It didn't cause big issues when VT-d was disabled.
But in VT-d enabled platform, lack of EhcFreeUrb call caused
the DMA data was not moved back to user's buffer.
It caused the correct data cannot be got through sync interrupt
transfer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
EBC compiler doesn't treat EFI_xxx as constant due to these macros
are UINT64 type in 64bit env and UINT32 type in 32bit env.
So it reports error when "case EFI_xxx" is used.
The patch changes to use if-else to fix EBC build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DUAL_ADDRESS_CYCLE is missing in the EFI_UNSUPPORTED
return status description.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current code always return EFI_MEDIA_CHANGED no matter the media
is removed from CD/DVD drive or the media is changed.
It doesn't strictly follow the UEFI Spec.
Update code to return EFI_NO_MEDIA when media is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Commit f6b139b added return status handling to PciIo->Mem.Write.
However, the second status handling will override EFI_DEVICE_ERROR
returned in this branch:
//
// Check the NVMe cmd execution result
//
if (Status != EFI_TIMEOUT) {
if ((Cq->Sct == 0) && (Cq->Sc == 0)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_DEVICE_ERROR;
^^^^^^^^^^^^^^^^
Since PciIo->Mem.Write will probably return SUCCESS, it causes
NvmExpressPassThru to return SUCCESS even when DEVICE_ERROR occurs.
Callers of NvmExpressPassThru will then continue executing which may
cause further unexpected results, e.g. DiscoverAllNamespaces couldn't
break out the loop.
So we save previous status before calling PciIo->Mem.Write and restore
the previous one if it already contains error.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable the device
at ExitBootServices()"
This reverts commit 6fb8ddd36b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at
ExitBootServices()"
This reverts commit 76fd5a660d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the UhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch is following 2c656af04d.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 5db417ed25.
"MdeModulePkg/PciBusDxe: Enable Bus Master on P2P bridges on demand"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 050763db07.
"MdeModulePkg/PciBus: Disable BME of all devices when entering RT"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
If a USB Mass Storage device does not support the Get
Max LUN command, then the USB I/O Protocol ControlTransfer()
service may return an error. If an error is returned for
this command, then assume that the device does not support
multiple LUNs and return a maximum LUN value of 0.
The USB Mass Storage Class Specification states that a
maximum LUN value larger than 0x0F is invalid. Add
a check to make sure this maximum LUN value is in this
valid range, and if it is not, then assume that the
device does not support multiple LUNs and return a
maximum LUN value of 0.
This change improves compatibility with USB FLASH drives
that do not support the Get Max LUN command or return
an invalid maximum LUN value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
The USB I/O Protocol function ControlTransfer() has a DataLength
parameter that specifies the size of the Data buffer. The
UsbBusDxe module implements the USB I/O Protocol using the
services of the USB2 Host Controller Protocol. The DataLength
parameter in the USB2 Host Controller Protocol ControlTransfer()
service is an IN OUT parameter so the number of bytes actually
transferred is returned. Since the USB I/O Protocol
ControlTransfer() service can not return the number of bytes
actually transferred, the only option if the number of bytes
actually transferred is less than the number of bytes requested
is to return EFI_DEVICE_ERROR.
The change fixes an issue with a USB mass storage device that
responds with 0 bytes to the Get MAX LUN command.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=782
Update the Request Sense check for the Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION. For this Sense Key, the
Additional Sense Key to EFI_STATUS mappings are:
USB_BOOT_ASC_MEDIA_CHANGE -> EFI_MEDIA_CHANGE
USB_BOOT_ASC_NOT_READY -> EFI_NOT_READY
USB_BOOT_ASC_NO_MEDIA -> EFI_NOT_READY
All others -> EFI_DEVICE_ERROR
A USB flash drive is returning Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION and an Additional Sense Key of
USB_BOOT_ASC_NO_MEDIA for a few seconds before returning an
Additional Sense Key of USB_BOOT_ASC_MEDIA_CHANGE.
The current logic treats this initial Request Sense info as an
error and reties the command 5 times before failing completely.
With this change the USB Flash Drive works correctly.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the SdBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EmmcBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2 changes:
Resource cleanup logic update in UfsEndOfPei().
V1 history:
Update the UfsBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Call IoMmuInit() after locating gPeiUsbControllerPpiGuid.
2. Call XhcPeiFreeSched() to do cleanup in XhcEndOfPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V2: Halt HC at EndOfPei.
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=766
Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:
http://www.usb.org/developers/docs/devclass_docs/usb_msc_boot_1.0.pdf
The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
For PciIoPciRead interface, memory prior to Buffer would be written
with zeros if Offset was larger than sizeof (Dev->ConfigSpace), which
would cause serious system exception.
So we add a pre-check branch to avoid memory override.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The patch ensures all DMA transactions are blocked after
ExitBootService.
If a platform enables IOMMU before and needs disable IOMMU after
ExitBootService, the IOMMU should be disabled after PCI bus driver
disables BME.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Currently, we complete a synchronous operation without unmapping the
DMA mappings, and free the pages using FreePages () rather than calling
EFI_PCI_IO_PROTOCOL::FreeBuffer. This is simply incorrect, but it also
breaks non-coherent DMA as well as DMA protection and/or memory encryption
so let's do it correctly and call SdMmcFreeTrb() instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It's a regression of below commit:
SHA-1: 8be37a5cee
* MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe
When PciBus driver fails to load the Option ROM, it doesn't produce
BusOverride protocol. It was a correct behavior before the above
commit. But due to the above commit, BusOverride protocol never is
produced by PciBus driver.
The patch fixes this issue using the following solution:
1. PciBus records the image device path when LoadImage fails.
2. Override.GetDriver() tries to look for the image handle using
the stored image device path.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch shouldn't impact functionality.
Original code records the ImageHandle of Option ROM by creating a
new entry. It's not necessary.
The patch updates the ImageHandle in the old entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch doesn't impact real functionality.
It only renames EFI_PCI_ROM_IMAGE_MAPPING to PCI_ROM_IMAGE,
and changes prototype of PciRomAddImageMapping so that
no explicit type cast is needed when calling this function.
It also removes unused field RomBase from PCI_IO_DEVICE structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Clearing I/O port decoding in the PCI command register at
ExitBootServices() breaks IDE boot in Windows, on QEMU's "pc" (i440fx)
machine type. (AHCI boot on "q35" is unaffected.) Windows seems repeatedly
stuck, apparently waiting for a timeout of sorts.
This is arguably a Windows bug; a native OS driver should not expect the
firmware to leave the PCI command register in any particular state.
Strictly speaking, we only need to disable BM-DMA at ExitBootServices(),
in order to abort pending transfers to/from RAM, which is soon to be owned
by the OS. BM-DMA is also the only bit that's explicitly named by the UEFI
Driver Writers' Guide, for clearing at ExitBootServices().
I've verified that clearing only BM-DMA fixes the issue (boot time) on
i440fx, and does not regress q35/AHCI.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dann Frazier <dannf@ubuntu.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Aleksei Kovura <alex3kov@zoho.com>
Reported-by: Dann Frazier <dannf@ubuntu.com>
Reported-by: https://launchpad.net/~cjkrupp
Bisected-by: Dann Frazier <dannf@ubuntu.com>
Bisected-by: https://launchpad.net/~cjkrupp
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Star Zeng <star.zeng@intel.com>
Ref: https://bugs.launchpad.net/ubuntu/+source/edk2/+bug/1725560
Fixes: 6fb8ddd36b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
The bug was caused by 728d74973c
"MdeModulePkg/PciBus: Count multiple hotplug resource paddings".
The patch firstly updated the Bridge->Alignment to the maximum
alignment of all devices under the bridge, then aligned the
Bridge->Length to Bridge->Alignment.
It caused too much resources were claimed.
The new patch firstly aligns Bridge->Length to Bridge->Alignment,
then updates the Bridge->Alignment to the maximum alignment of all
devices under the bridge.
Because the step to update the Bridge->Alignment is to make sure
the resource allocated to the bus under the Bridge meets all
devices alignment. But the Bridge->Length doesn't have to align
to the maximum alignment.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Existing code forgot to set Descriptor->SpecificFlag to 0 when
the resource type is non-prefetchable MMIO.
The patch adds the missing assignment.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Star Zeng
Laszlo Ersek
Chen A Chen
shenglei
Ruiyu Ni
Thomas Palmer
Hao Wu
Liming Gao
Sami Mujawar
Ard Biesheuvel
Ming Huang
Heyi Guo
Dandan Bi
Michael D Kinney