REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2219
First previous patch remove the VT100Plus's arrow keys' support.
Add it back.
The arrow keys would send ESC [A through to ESC [D. Add this
support for the new introduced terminal type.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1944
FormatDosFiles.py Intel\ServerSiliconPkg --exclude Library\SimRegisters\
Its parameter "Library\SimRegisters\" ends with '\'
but I can't seem to get it to exclude the SimRegisters directory
This patch is going to fix this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1039
Current implementation not checks system mode before using
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.X64 or
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.Ia32. This patch check the
mode before using the correct one.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EBC compiler doesn't support C11 static_assert macro.
So, define STATIC_ASSERT as empty to pass EBC arch build.
STATIC_ASSERT macro is introduced @204ae9da230ecbf0910c21acac7aa5d5e8cbb8d0
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
There is no sourceX offset in case when
Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor.
We are copying most left pixels instead of copying required rectangle.
Signed-off-by: Gris87 <Gris87@yandex.ru>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in ShellPkg which don't have the policy to defer the
execution of the image.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the caller in PlatformDriOverrideDxe which don't have the policy to
defer the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in UefiBootManagerLib which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in DxeCapsuleLibFmp which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in EmbeddedPkg which don't have the policy to defer the
execution of the image.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2186
Add the new introduced terminal types to related setup menu to change
the terminal type from setup. Most platforms would have its own
configure setup menu and they need to change it to support these.
The new introduced terminal types are Linux, XtermR6, VT400 and SCO.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2186
Extend the support types of terminal console driver. New added types
are Linux, XtermR6, VT400 and SCO.
Refer to
https://www.ssh.com/ssh/putty/putty-manuals/0.68/Chapter4.html#config-funkeys
Add the missing VT100+ function keys map.
Add F1-F12 function keys map for Linux, XtermR6, VT400 and SCO.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2186
A common terminal console software Putty support various types of
keyboard type, such as normal mode, Linux mode, Xterm R6, Vt400,
VT100+ and SCO. Refer to the link:
https://www.ssh.com/ssh/putty/putty-manuals/0.68/Chapter4.html#config-funkeys
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2203
This patch is going to fix a regression issue that
build breaks when the custom makefile exist.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
Inorder to support VS2019, we add VS2019 config process
in Setup Batch Files,
Because VS2019 and VS2017 could using same vswhere.exe
to detect the InstallationPath,
So we add the -version as the parameter of vswhere
to get the correct VS2017/VS2019's InstallationPath
v3: In BaseTools\set_vsprefix_envs.bat,
move WINSDK10_PREFIX setting into VCToolsInstallDir check condition.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ching JenX Cheng <ching.jenx.cheng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
In order to support VS2019,
the first thing need to do is add 2019 toolchain on tools_def.template
v2: add ARM/AARCH64/EBC Definitions, Combine VS2017_HOST and VS2019_HOST to VS_HOST
Cc: Amy Chan <amy.chan@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ching JenX Cheng <ching.jenx.cheng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
As is requested in the BZ 2077, add two switches to support setting
compression mode and dictionary size.
(https://bugzilla.tianocore.org/show_bug.cgi?id=2077)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit bc9e4194cf.
This change causes the dependent header files are missing in Makefile.
It makes the incremental build not work. So, revert this change.
Cc: Bob Feng<bob.c.feng@Intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2150
v4:
The v3 posting didn't do what it promised to do, so do it now for real.
V3 changes:
change to mov instruction (non locking instuction) instead
of xchg to simplify design.
V2 changes:
Add xchg 16 bit instructions to handle sgdt and sidt base
63:48 bits and 47:32 bits.
Add comment to explain why xchg 64bit isnt being used
Split lock happens when a locking instruction is used on mis-aligned data
that crosses two cachelines. If close source platform enables Alignment
Check Exception(#AC), They can hit a double fault due to split lock being
in CpuExceptionHandlerLib.
sigt and sgdt saves 10 bytes to memory, 8 bytes is base and 2 bytes is limit.
The data is mis-aligned, can cross two cacheline, and a xchg
instruction(locking instuction) is being utilize.
Signed-off-by: John E Lofgren <john.e.lofgren@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Due to needs a tackling the deficiency of the AP API, it's necessary to
ensure that in non-blocking mode previous AP executed command is
finished before starting new one.
To remedy above:
1) execute AcquireSpinLock instead AcquireSpinLockOrFail - this will
ensure time "window" to eliminate potential race condition between
BSP and AP spinLock release in non-blocking mode.
This also will eliminate possibility to start executing new AP
function before last is finished.
2) remove returns EFI_STATUS - EFI_NOT_READY - in new scenario returned
status is not necessary to caller.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
removing myself from maintainer
promoting Zhichao
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <Zhichao.gao@intel.com>
Cc: Mike Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2201
An error occurs using special VpdPcd that is not used in the Inf file
In dsc:
[PcdsDynamicExVpd.common.DEFAULT]
gBoardModuleTokenSpaceGuid.test1|*|{CODE({
{0x0} // terminator
})}
In dec:
[PcdsDynamicEx]
# Vpd GPIO table
gBoardModuleTokenSpaceGuid.test1|{0}|GPIO_INIT_CONFIG[]|0x50000018 {
<HeaderFiles>
Library/GpioLib.h
<Packages>
MdePkg/MdePkg.dec
}
ValueError: invalid literal for int() with base 0: '*'
This Patch is going to fix issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add GetTimeInNanoSecond, already declared in the TimerLib API,
to EmulatorPkg implementations of TimerLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael Johnson <michael.johnson@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdCpuSmmRestrictedMemoryAccess is introduced to replace
PcdCpuSmmStaticPageTable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2193
The current CopyFileOnChange() method in Misc.py does not
accept the input SrcFile parameter as a dir, but the method
does not check the SrcFile is dir or not. This patch is to
add more input parameter type checking and error message output
for method CopyFileOnChange.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The StandaloneMmPkg .DSC file went out of sync with the changes
applied to the package when I enabled this code on the Synquacer
platform in edk2-platforms. So apply the necessary changes to make
this package build in isolation.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix regression issue caused by 0d85e67714
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2183
This patch is going to remove rename call to reduce unnecessary
io operation so that saving build time.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2101
This patch is going to remove unnecessary calls
of os.exist()
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2102
GetDependencyList get the header file via
re.findall in the whole header file.
This patch is to pre-process the header file and
to feed the shorter string to re.findall.
This patch is to improve GetDependencyList() efficiency
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1858
for Dict={},There are pitfalls in the way this default parameter is set
and Dict is not used in functions, other functions have these two cases,
I will change some incorrect parameter defaults
This patch is going to fix this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2188
build -p MdeModulePkg\MdeModulePkg.dsc -a IA32 -m
MdeModulePkg\Universal\PCD\Pei\Pcd.inf
Error:
AttributeError: 'PlatformInfo' object has no attribute
'DynamicPcdList'
The DSC data object used to build a separate module today
is PlatformInfo rather than PlatformAutoGen
'PlatformAutoGen' object has attribute 'DynamicPcdList'
This patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add a function that checks if a target language is in the supported
languages list. Add some calls to this function where appropriate in
UefiLib.c
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Zhao <tzhao@solarflare.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Common definitions are not consumed by VFR. They are not required to be
defined in Tcg2ConfigNvData.h with WA way. New shared internal header
file is added to include those common definitions.
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2048
New STATIC_ASSERT macro supersedes VERIFY_SIZE_OF as being more functional.
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FILE GUID in MdeModulePkg\Universal\SerialDxe\SerialDxe.inf is
same to the one gEdkiiSerialPortLibVendorGuid.
Its FILE GUID should be updated to another value.
https://bugzilla.tianocore.org/show_bug.cgi?id=2144
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
FILE GUID in PeiEmuSerialPortLib.inf is same to
MdePkg\Library\BaseSerialPortLibNull\BaseSerialPortLibNull.inf.
PeiEmuSerialPortLib.inf FILE_GUID should be updated.
https://bugzilla.tianocore.org/show_bug.cgi?id=2144
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
S3PciSegmentLib library class header file should be
Include/Library/S3PciSegmentLib.h instead of
Include/Library/PciSegmentLib.h.
https://bugzilla.tianocore.org/show_bug.cgi?id=2146
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove Ting Ye from reviewer role and add Xiaoyu Lu as new reviewer of CryptoPkg.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Ting Ye <ting.ye@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
The header files are used but missing in INF, which causes
warning message when building them.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
After upgrading the CI system we use for building the ArmVirtPkg
targets, we started seeing failures due to the NOOPT build running
out of space when using the CLANG38 toolchain definition combined
with clang 7.
We really don't want to increase the FD/FV sizes in general to
accommodate this, so parameterize the relevant quantities and
increase them by 50% for NOOPT builds.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Today's behavior is to enable 5l paging when CPU supports it
(CPUID[7,0].ECX.BIT[16] is set).
The patch changes the behavior to enable 5l paging when two
conditions are both met:
1. CPU supports it;
2. The max physical address bits is bigger than 48.
Because 4-level paging can support to address physical address up to
2^48 - 1, there is no need to enable 5-level paging with max
physical address bits <= 48.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2080
After checking that if the build can't
ignore Autogen due to there is no compelet autogen files,
the build tool need to do a completely Autogen.
This patch is to fix a bug that if AutoGen
can't be skiped, the SkipAutoGen flag
need to set to False
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2048
Provide a macro for compile time assertions.
Equivalent to C11 static_assert macro from assert.h.
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
When building BaseTools, GNUmakefile builds create directory
BaseTools/Source/C/libs/. On the other hand, Makefile builds use libs
as an nmake pseudo target, so it either must NOT exist as a file or
directory, OR it must phony dependency like .PHONY. The latter
solution conflicts with NmakeSubdirs.py. Therefore, I make it go away
in the cleanall target. I could also add it to the clean target, but
it strikes me that cleanall should be more forceful.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1302
This patch enable --genfds-multi-thread to default build.
This patch keep --genfds-multi-thread build option for
compatibility and also add a new build option to disable
genfds-multi-thread as --no-genfds-multi-thread.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>