The error return is triggered by one of two conditions:
1. rrecp is NULL (calloc failed)
2. strdup(dname) returns NULL
Previously, the function just returned NULL. This patch adds a call to
free rrecp before returning NULL. Since the free() function will properly
do nothing when called with a NULL parameter, it is not necessary to
separate the two tests into separate if clauses.
Reported-by: Colin King <colin.king@canonical.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <edk2-lists@mc2research.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch revises multiple diagnostic messages to use correct
datatypes. It also checks that a symbol name that is about to be used
in a diagnostic message is terminated by a null character within the
contents of the string table section so that the print routine does
not read past the end of the string table section contents when
reading the symbol name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch expands the error message that is output when GenFw
encounters a bad symbol definition or an unsupported symbol type. It
displays the symbol name, the symbol address, and a message that
describes both possibilities (bad symbol definition or unsupported
symbol type). It also provides two examples of unsupported symbol
types.
Furthermore, this patch revises the conditional for detecting bad
symbol definitions to eliminate a redundant test (a Sym->st_shndx
value of SHN_ABS should certainly be greater than mEhdr->e_shnum) and
to change another test from 'Sym->st_shndx > mEhdr->e_shnum' to
'Sym->st_shndx >= mEhdr->e_shnum' for consistency with the test in
GetShdrByIndex.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch revises GetPhdrByIndex and GetShdrByIndex to cause GenFw to
exit with an error message when a section header lookup fails. The
current behavior of those functions in such circumstances is to return
NULL, which can cause GenFw to subsequently fault when it attempts to
dereference the null pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch fixes a bug in SNP driver that the Cdb.StatCode should be check with
PXE_STATCODE_SUCCESS instead of EFI_SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
SNP driver will print the UNDI returned StatFlags:StatCode with DEBUG macro,
while in some please it uses the reverse order (StatCode:StatFlags). This patch
is to make the print info consistent, that StatFlags always come first.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
MemoryAttributesTable generation need information in
PropertiesTable.
In memory attributes table generation path,
PropertiesTable need record original memory map and do
not merge the new memory map entry cross original
memory map boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Add MemoryAttributesTable generation in DxeCore.
We leverage the information collected by original
PropertiesTable, and publish runtime code/data to
another standalone table. So that this is a
compatible solution to report more PE Code/Data
information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
Juno is now managed in OpenPlatformPkg, including the ACPI
tables - so delete this unmaintained copy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Refine the function comments in ConfigKeywordHandler.c and
HiiDatabase.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Standardize the --version and --help text command-line options
Updated tools to correctly display the Build number when using command-line
option --version and exit successfully after termination.
Ecc was also updated to print informational messages after the options are
parsed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Larry Hauch <larry.hauch@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Before the merger of the authenticated and non-authenticated variable
drivers (commit fa0737a839), we had to match the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc" to SECURE_BOOT_ENABLE, because the opposite
GUID would cause either driver to fail an assertion. The header structures
for individual variables residing in the varstore were different
(VARIABLE_HEADER vs. AUTHENTICATED_VARIABLE_HEADER), and each driver could
only handle its own, so this GUID enforcement was necessary.
Since the unification of the variable driver however, it treats (a)
variable store format, and (b) AuthVariableLib instance as independent
characteristics; it can always manipulate variable stores with both header
types. All variations boot now; the difference is whether authenticated
variables, and special variables computed from them (like SecureBoot) are
supported at runtime:
variable store non-auth auth and SB
header GUID AuthVariableLib variables variables
-- --------------------- ------------------- -> --------- -----------
1 Variable SecurityPkg/... supported unsupported
2 Variable AuthVariableLibNull supported unsupported
3 AuthenticatedVariable SecurityPkg/... supported supported
4 AuthenticatedVariable AuthVariableLibNull supported unsupported
At the moment, SECURE_BOOT_ENABLE selects between cases #2 (FALSE) and #3
(TRUE). That is, it controls both the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc", and the AuthVariableLib resolution in the DSC
files.
Exploiting the unified driver's flexibility, we can simplify
"OvmfPkg/VarStore.fdf.inc" by picking the AuthenticatedVariable GUID as a
constant, and letting SECURE_BOOT_ENABLE control only the AuthVariableLib
resolution. This amounts to SECURE_BOOT_ENABLE choosing between cases #3
(TRUE) and #4 (FALSE), with identical results as before.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/7319/focus=7344
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Follow UEFI 2.6 spec to minor update the comments of
AllocatePages() and AllocatePool().
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
At the end of CoreFreePoolI(), the check to see if it is a specific
memory type should also cover OEM reserved memory type.
It was missed when adding OEM reserved memory type support at R17460.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Modify the DefaultExceptionHandler (uefi-variant) so it can be used by
DxeCore (via CpuExceptionHandlerLib) where the debug info table is not
yet published at library constructor time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This adds support to the ELF to PE/COFF conversion performed by GenFw for
the AArch64 ELF relocation types R_AARCH64_PREL64, R_AARCH64_PREL32 and
R_AARCH64_PREL16. Since we already require the ELF and PE/COFF section
layouts to be identical in order to support other relative relocation
types, this is simply a matter of whitelisting these new relocation types
in the same way.
While we're at it, clean up the code a bit, and add a comment explaining
why these relocations are ignored in WriteRelocations64 ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit also removes common structure definitions between EFI Wireless
MAC Connection Protocol and EFI Wireless MAC Connection II Protocol from
WiFi.h and place them in WiFi2.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix a possible buffer overrun issue that could occur if PrefixLength >
128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which
is no longer possible because of the first change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Fix a minor grammatical error in the PXE boot message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Recent versions of the Intel C compiler define the _MSC_EXTENSIONS
constant. Base.h checks if this constant is defined to decide whether
or not to use a pragma intrinsic, which is unsupported by the latest
version of the Intel C compiler. Thus the check has been modified to
only pass in the case __INTEL_COMPILER is not defined.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file,
called "board.dtb" and the motherboard configuration makes the right
choice about which DTB file gets written as board.dtb in NOR.
The code attempts to select which DTB it should use based on the board
variant or configuration. And this doesn't work because those DTB files
aren't present in NOR flash.
So remove the DTB variants and only load board.dtb.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Code was inserted to create default boot entries for Juno R1. These
don't work, but they are also preventing the board from booting into the
default options that Intel BDS would otherwise boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The variable TimeOut is actually a retry, not a timeout, so I renamed
the variable accordingly.
This patch makes no functional change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch makes a few minor DEBUG output changes:
- Fix typo in DEBUG output: Negociation->Negotiation
- Change DEBUG occurrences of "Lan9118" to "LAN9118" to make grepping
the log output easier.
- Change the warning that auto-negotiation is not supported when
AutoNegotiate() returns an error.
The function already reports if the feature is supported or not and
can also return an error for other reasons.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a PCD for the link negotiation timeout so the platform can over-ride
the default value.
The code previously did 2000 iterations of the loop with a 2us stall, so
the code has been changed subtly to set the number of iterations equal
to the PCD value divided by the stall time.
Since the stall time has not changed, the default PCD value is set at
4000 so the original behaviour is not changed.
The problems were discovered when the ARM Juno Development Platform used
the "EFI Network" option with then LAN9118 driver. It fails to boot the
first time and so the board drops back to Shell again:
Warning: LAN9118 Driver in stopped state
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
EhcExecTransfer: transfer failed with 2
EhcControlTransfer: error - Device Error, transfer - 2
Buffer: EFI Hard Drive
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
Warning: LAN9118 Driver not initialized
Link timeout in auto-negotiation.
Lan9118: Auto Negociation not supported.
Booting EFI Internal Shell
Exiting Shell drops the user back to the Intel BDS UI. Selecting
"Continue" then succeeds in booting from the EFI Network:
Booting EFI Misc Device
Booting EFI Misc Device 1
Booting EFI Hard Drive
Booting EFI Network
..MnpFreeTxBuf: Duplicated recycle report from SNP.
MnpFreeTxBuf: Duplicated recycle report from SNP.
[snip repeated errors]
Discussion on the edk2-devel mailing list [1] prompted Laszlo Ersek to
suggest the time taken for the NIC to negotiate was causing a problem.
He suggested the solution contained in this patch to provide a PCD
configurable by the platform.
The default PCD value does not work for Juno. Setting the PCD to a
larger value works for Juno R0, R1 and R2.
[1] http://article.gmane.org/gmane.comp.bios.edk2.devel/7341
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When reviewing my LAN9118 driver PCD patch [1], Ard Biesheuvel noted
that most calls to gBS->Stall() in this driver seem to be used to
prevent timing issues between the device updating data and the host
reading the values. And that replacing most of these calls with a
MemoryFence() would be more robust.
The only exceptions are the stalls that are enclosed inside retry loops:
- in the AutoNegotiate() function.
This stall is waiting for the link to negotiate, which may require
stalling until it is ready.
- in the Lan9118Initialize() function.
These two stalls are waiting for devices and time out after a number
of retries.
- in the SoftReset() function.
This stall is inside a loop where the comment states:
"If time taken exceeds 100us, then there was an error condition"
In these instances, I kept the stall, but also added a MemoryFence().
[1] http://article.gmane.org/gmane.comp.bios.edk2.devel/7389
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
An earlier change had this function returning the type of lines that were in
the file being read (ASCII or UCS2). The way it is used, UCS2 output is
expected, even when the file being read is ASCII. This change restores that
behavior and documents it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Separate ShellPkg and ShellBinPkg into separate entities.
Add Leif Lindholm and Ard Biesheuvel as ShellBinPkg maintainers
for ARM/AArch64 only.
Add indicaton that Jaben Carsey and Shumin Qiu are maintainers for
Ia32/X64 specifically.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Setup the EFI System Table with information about the
Console Devices early, so that error messages in bds
are printed on the console earlier.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The binaries of ShellBinPkg are generated with ShellPkg from
9a8f6fb407 ("ArmPlatformPkg: remove unused Sec library").
This reintroduces the non-standard tftp commands that were
unintentionally dropped with svn r18243.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
The Sec library was built by the AARCH64 FVP models, but the binary was
unused because it was part of a legacy booting strategy from before ARM
Trusted Firmware came along.
This change requires changes in OpenPlatformPkg to remove the Sec binary
from the FVP build.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Cinnamon Shia
Daryl McDaniel
Michael LeMay
Hao Wu
jiewen yao
Fu Siyuan
Leif Lindholm
Dandan Bi
edk2 dev
Laszlo Ersek
Star Zeng
Cohen, Eugene
Ard Biesheuvel
Samer El-Haj-Mahmoud
edk2-devel
Ryan Harkin
Jim Dailey
Jaben Carsey
Supreeth Venkatesh