Juno is now managed in OpenPlatformPkg, including the ACPI
tables - so delete this unmaintained copy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Juno doesn't have lots of DTB files in NOR flash, it only has 1 file,
called "board.dtb" and the motherboard configuration makes the right
choice about which DTB file gets written as board.dtb in NOR.
The code attempts to select which DTB it should use based on the board
variant or configuration. And this doesn't work because those DTB files
aren't present in NOR flash.
So remove the DTB variants and only load board.dtb.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Code was inserted to create default boot entries for Juno R1. These
don't work, but they are also preventing the board from booting into the
default options that Intel BDS would otherwise boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM Ltd Platform support is migrating to use OpenPlatformPkg [1].
Currently, Juno exists both in EDK2's ArmPlatformPkg and in
OpenPlatformPkg [2]. And they are starting to diverge, with
OpenPlatformPkg being the most up-to-date with current developments.
To prevent this divergence, remove the .dsc and .fdf files from
ArmPlatformPkg and leave OpenPlatformPkg as the master.
We can't remove ArmJuno.dec yet because ACPI still uses it to set the
include path to ArmPlatform.h.
[1] https://git.linaro.org/uefi/OpenPlatformPkg.git
[2] https://git.linaro.org/uefi/OpenPlatformPkg.git/tree/master:/Platforms/ARM/Juno
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
We can refer to gArmMpCoreInfoPpiGuid directly if we declare it under
[Ppis] in the library's .inf so there is no need to copy it into a
module local variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19240 6f19259b-4bc3-4df7-8a09-765794883524
ArmJunoDxe does not use gArmGlobalVariableGuid so drop the declaration
from the .inf.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18999 6f19259b-4bc3-4df7-8a09-765794883524
We can remove all mention of ArmPlatformGlobalVariableLib now that
there are no remaining [transitive] dependencies on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18988 6f19259b-4bc3-4df7-8a09-765794883524
The JunoR1 has a GICv2m which is a GICv2 with a little piece of hardware
that has some memory mapped locations that can trigger traditional SPI
interrupts. This allows some basic PCIe MSI capabilities.
Setup the SPI range that is mapped by the MSI window. This range is
described in the JunoR1 SoC TRM, table 3-3. Under Interrupt ID 244-351 is
described as "GICv2m PCI Express MSI". In the future when these tables
are generated programmatically the information may be found in the
MSI_TYPER register as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18723 6f19259b-4bc3-4df7-8a09-765794883524
These patches correct a number of problems with the JUNO ACPI tables.
First, put CCA attributes on the devices which can do DMA. This is
because the linux kernel now requires ARM64 devices specify a coherency
model. Without CCA the devices are unable to perform DMA.
Update the EHCI window to a full 64k as documented in the
Juno Platform SoC TRM. This makes it match the values used in some
other places.
Finally, add some _DSD entries for the SMSC ethernet chip.
The latter changes are required for the mainline kernels to use the adapter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18628 6f19259b-4bc3-4df7-8a09-765794883524
All of AcpiSsdtRootPci.asl and some bits of Gtdt.aslc used LF-only
line separators. Fix before committing new modifications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18627 6f19259b-4bc3-4df7-8a09-765794883524
Currently the MADT signature and revision is mapped to v1.0 macros
which results in MADT with incorrect entries in the header for Juno.
This patch fixes these EFI_ACPI_*_0_MULTIPLE_APIC_DESCRIPTION_TABLE
macros by using appropriate v5.0 versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18572 6f19259b-4bc3-4df7-8a09-765794883524
Remove the ARMGCC and ARMLINUXGCC from comments in the respective
Makefiles of ArmPlatformPkg and ArmJunoPkg. Also drop the wildly
outdated Versatile Express instructions, since they refer to ARMGCC
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18209 6f19259b-4bc3-4df7-8a09-765794883524
No need to hardcode the TE alignment anymore, now that GenFw sets
the PE/COFF alignment according to the alignment requirements of
the ELF input sections.
Also enable FIXED FFS placement so that we can reclaim some of the
space wasted to padding when using clang with 4 KB section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18195 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI .aslc files contain a ReferenceAcpiTable() function whose
sole purpose is to ensure that the table itself does not get optimized
away. However, when using clang, these dummy functions result in a 4 KB
section alignment requirement, which is silly since everything except
the .data section is discarded later anyway.
So instead, make ReferenceAcpiTable a CONST pointer to VOID*. This way,
we still have a .text section, which is mandatory for the PE/COFF
conversion, but no executable code with small model relocations that
impose additional alignment requirements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18194 6f19259b-4bc3-4df7-8a09-765794883524
There are still ARM/AArch64 Linux kernels that do not support EFI Stub.
By using the EFI Linux loader as the default option we can boot any
Linux kernel from UEFI as Linux kernel with EFI stub can also be
booted with the legacy way.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17975 6f19259b-4bc3-4df7-8a09-765794883524
PcdDefaultBootType has been removed when the embedded
Linux Loader has been removed from BdsLib.
The boot arguments (defined by PcdDefaultBootArgument)
are now always targetting EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17971 6f19259b-4bc3-4df7-8a09-765794883524
Add the legacy Linux Loader EFI application to the ARM
development platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17968 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Therefore we can remove Ip4ConfigDxe driver from this build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17911 6f19259b-4bc3-4df7-8a09-765794883524
By default, a MemoryMap() EFI Device Path is created
for the Firmware Volumes.
It means it is difficult to build a Non-Volatile permanent
Device Path for the Firmware Volume as the location in
System Memory may change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17827 6f19259b-4bc3-4df7-8a09-765794883524
The PCI Root bridge is defined by PciRoot(0x0)/Pci(0x0,0x0).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17528 6f19259b-4bc3-4df7-8a09-765794883524
PCI support is only present on Juno R1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17415 6f19259b-4bc3-4df7-8a09-765794883524
We keep UID=0 for the 'real' PCI root complex on the Juno board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17342 6f19259b-4bc3-4df7-8a09-765794883524
PcdOverridePlatformFdt was set with its default value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17306 6f19259b-4bc3-4df7-8a09-765794883524
The Fdt platform driver has been moved at the end of the list
of the DXE/UEFI drivers to ensure the device drivers have been
dispatched prior to load the FDT platform driver.
For instance, if we want to load FDT from TFTP we must have
the ethernet driver to be already loaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17305 6f19259b-4bc3-4df7-8a09-765794883524
MemoryInitPeim short-circuits its MemoryInitPeiLib dependency by including
the .c file directly. This prevents us from having a special implementation
for ArmVirtualizationPkg that performs additional cache maintenance before
enabling the MMU. So instead, make it depend on the library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17175 6f19259b-4bc3-4df7-8a09-765794883524
LzmaDecompress support is moving from IntelFrameworkPkg to
MdeModulePkg.
This change ensures ArmPlatformPkg reflects this future change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <ronald.cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17133 6f19259b-4bc3-4df7-8a09-765794883524
The default name should match the legacy Juno R0 name (ie: juno.dtb)
to ensure the updated UEFI firmware still works on the deployed Juno R0
board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17097 6f19259b-4bc3-4df7-8a09-765794883524
On Juno R1, the MAC address assigned to the PCI Gigabyte Ethernet device
as to be passed to the Linux Kernel.
The MAC address is passed to the Linux Kernel by means of the boot argument
"sky2.mac_address".
This patch adds this boot argument to the lists of boot arguments of the
two Juno R1 default boot options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17095 6f19259b-4bc3-4df7-8a09-765794883524
Juno R1 can run in two configurations:
- A57x2
- A57x2-A53x4
The Device Tree tell Linux which configuration has been selected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16942 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
The MIDR register of the CPU on which the UEFI firmware is running on
is used to infer if the platform is a Juno r0 or a Juno r1. The right
device path to the platform FDT is then stored in the
"gEmbeddedTokenSpaceGuid.PcdFdtDevicePaths" dynamic PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16939 6f19259b-4bc3-4df7-8a09-765794883524
Remove the installation of the FDT for Juno into the UEFI Configuration
Table from the Juno specific DXE driver. Use the FdtPlatformDxe driver to
do it instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16938 6f19259b-4bc3-4df7-8a09-765794883524
- 'earlycon' is the new name for 'earlyprintk'
- Support Linux EFI stub by default
- The command line is expected to be in unicode when
booting an EFI application.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16928 6f19259b-4bc3-4df7-8a09-765794883524
This support makes the Juno UEFI Firmware to look into the Firmware Volume
for the ACPI Tables. But it does not provide the ACPI Tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16651 6f19259b-4bc3-4df7-8a09-765794883524
Leif Lindholm
Ryan Harkin
Ard Biesheuvel
Star Zeng
Jeremy Linton
Supreeth Venkatesh
Sudeep Holla
Olivier Martin
Ronald Cron
Jiaxin Wu