The value of EBX must be preserved to follow IA32 cdecl calling convention in the assembly
implementation of AsmFlushCacheLine(). The CPUID instruction modifies the EBX register.
The EBX register value is saved onto the stack before CPUID and restored from the stack
after CPUID.
The update to the inline assembly implementation of AsmFlushCacheLine() changed the location of the
LinearAddress parameter value on the stack. The hardcoded lookup using [esp + 4] is not correct.
Use the parameter name LinearAddress instead of the hard coded [esp + 4] stack location to prevent
this issue from occurring again if there are changes to the inline assembly in the future.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17279 6f19259b-4bc3-4df7-8a09-765794883524
Add new information block ‘IPV6 support from UNDI’ in AIP protocol and provide sample implementation in UNDI driver.
Update PXE driver to get ‘Ipv6Available’ of PXE BC Mode data from UNDI driver, if unsupported then not to start PXE over IPv6 path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17275 6f19259b-4bc3-4df7-8a09-765794883524
The IP6 driver may create duplicate IP6_DAD_ENTRY in DupAddrDetectList in some situation like:
1. Address policy switch but not clear the delay node list, OR
2. Set manual address repeatedly before the previous DAD is finished.
The NS sent out by duplicate DAD entry will mix up with the loop back multicast packet, result in DAD fail.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17263 6f19259b-4bc3-4df7-8a09-765794883524
Include this definition to make sure EfiMaxMemoryType be same value in EDKII and ECP code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17252 6f19259b-4bc3-4df7-8a09-765794883524
There are two FSP images at different locations in a flash (one factory version is read only and other in updatable version)
TempRamInit, FspMemoryInit and TempRamExit are executed from factory version and FspSiliconInit/NotifyPhase will be executed from updatable version.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Ma, Maurice" <maurice.ma@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17249 6f19259b-4bc3-4df7-8a09-765794883524
There are two FSP images at different locations in a flash (one factory version is read only and other in updatable version)
TempRamInit, FspMemoryInit and TempRamExit are executed from factory version and FspSiliconInit/NotifyPhase will be executed from updatable version.
Also update FSP specification version to v1.1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Ma, Maurice" <maurice.ma@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17248 6f19259b-4bc3-4df7-8a09-765794883524
The changes in ScsiDisk include:
1. Add UFS disk info support.
2. Remove the wrong block size calculation.
3. Get sense data for TEST_UNIT_READY cmd immediately rather than sending a REQUEST_SENSE cmd again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17247 6f19259b-4bc3-4df7-8a09-765794883524
It includes 4 drivers:
1. UfsPassThruDxe, which is a UEFI driver and consumes EFI_UFS_HOST_CONTROLLER_PROTOCOL and produces EFI_EXT_SCSI_PASS_THRU_PROTOCOL
2. UfsPciHcDxe, which is specific for pci-based UFS HC implementation and is a UEFI driver to produce EFI_UFS_HOST_CONTROLLER_PROTOCOL.
3. UfsBlockIoPei, which is a PEI driver and consumes EFI_UFS_HOST_CONTROLLER_PPI and produces EFI_PEI_VIRTUAL_BLOCK_IO_PPI.
4. UfsPciHcPei, which is specific for pci-based UFS HC implementation and is a PEI driver to produce EFI_UFS_HOST_CONTROLLER_PPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17246 6f19259b-4bc3-4df7-8a09-765794883524
These definitions are defined in UEFI2.5/PI1.4 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17245 6f19259b-4bc3-4df7-8a09-765794883524
The MP Services PPI is installed by some platform or chipset-specific PEIM
that abstracts handling multiprocessor support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17234 6f19259b-4bc3-4df7-8a09-765794883524
The PeiGraphicsPpi is the main interface exposed by the Graphics PEIM to
be used by the other firmware modules.
When graphics capability is included in PEI, it produces a
EFI_PEI_GRAPHICS_INFO_HOB which provides information about the graphics
mode and the framebuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17233 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17221 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17220 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions.
Force use of software breakpoints if debug extensions are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17219 6f19259b-4bc3-4df7-8a09-765794883524
Avoid use of Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS) if there is only 1 CPU present.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17218 6f19259b-4bc3-4df7-8a09-765794883524
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17217 6f19259b-4bc3-4df7-8a09-765794883524
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17216 6f19259b-4bc3-4df7-8a09-765794883524
Add stride PCD to MdeModulePkg to support 16550 UARTs with a register stride that is not 1 byte.
The default value is 1 byte.
Quark SoC uses a stride of 4 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17215 6f19259b-4bc3-4df7-8a09-765794883524
Remove use of CMOVx instruction from IA32 assembly files in BaseMemoryLibRepStr.
This matches compiler flags for all supported C compilers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17214 6f19259b-4bc3-4df7-8a09-765794883524
Remove use of CMOVx instruction from IA32 assembly files in BaseLib.
This matches compiler flags for all supported C compilers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17213 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for CLFLUSH instruction.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17212 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for CLFLUSH instruction.
If CLFLUSH is supported, use CPUID to determine the cache line size to use with CLFLUSH.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17211 6f19259b-4bc3-4df7-8a09-765794883524
The number of the Prp lists and the number of the entries in last Prp list may be calculated wrongly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Baban Devkate <baban.devkate@seagate.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17208 6f19259b-4bc3-4df7-8a09-765794883524
Clear EFLAGS.IF before executing Stepping command and save original
value in DEBUG_AGENT_FLAG. It could avoid pending interrupt issued
during executing Stepping command. Restore EFLAGS.IF after Stepping
command execution finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17204 6f19259b-4bc3-4df7-8a09-765794883524
Add InterruptFlag field in DEBUG_AGENT_FLAG. This field is used to
save/restore EFLAGS.IF across Stepping command execution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17203 6f19259b-4bc3-4df7-8a09-765794883524
The run time service 'QueryVariableInfo' is not proper to be used to get the variable name size. This patch refine the logic about allocating memory for variable name and data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17201 6f19259b-4bc3-4df7-8a09-765794883524
The list of handles needs to be freed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17199 6f19259b-4bc3-4df7-8a09-765794883524
Add a comment for GetHandleListByProtocol and GetHandleListByProtocolList to tell the caller they are responsible for freeing the returned memory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17198 6f19259b-4bc3-4df7-8a09-765794883524
Yao, Jiewen
Michael Kinney
Ye Ting
Liming Gao
Fu Siyuan
Ma, Maurice
Feng Tian
Hao Wu
Mang Guo
Jeff Fan
Qiu Shumin
Jaben Carsey