In current code, BootMaintenanceManagerUiLib is not BDS scope.
So we remove bds keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, UiApp is not the BDS scope. So we remove the bds
keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, we use different output modes for boot phase
and setup phase. When split BootMaintenanceMangerUiLib from
UiApp code, we not add logic to save the boot phase mode info
which will be used later. This change add this logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, we use different output modes for boot phase
and setup phase. When split BootManagerUiLib from UiApp code,
we not add logic to save the boot phase mode info which will
be used later. This change add this logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FirmwareVolmeInfoPpiNotifyCallback is re-enterable during FV process. Since PrivateData->FVCount increases when processing each sub FVs, need to cache Parent FV count in stack before processing any sub FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
CorebootModulePkg currently uses a hardcoded table for memory type
initialization. It might need to be adjusted by platform to reduce
the memory fragmentation. So changing to use PCDs rather than
constant values to facilitate the customization.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
When the parameter is unsupported or invalid,
should exit the function.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
When PcdPciDisableBusEnumeration is enabled, the PciBus driver
might get into a dead loop if the secondary bus register on PCI
bridge is not programmed or programmed improperly. Adding this
check to avoid any potential dead loop caused by this.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Lee Leahy <Leroy.p.leahy@intel.com>
The original BdsDxe driver has "Enter Setup" status code
while current code not. This patch restores it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If 'ReadKeyStroke' function return EFI_NOT_READY then skip it.
If the return value is EFI_DEVICE_ERROR clean the currentString buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
EDKII build spec and DEC spec updated to support private package
definition.
If GUID, Protocol or PPI is listed in a DEC file, where the Private
modifier is used in the section tag ([Guids.common.Private] for example),
only modules within the package are permitted to use the GUID, Protocol
or PPI. If a module or library instance outside of the package attempts
to use the item, the build must fail with an appropriate error message.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This can accommodate 10 bridges (including root bridges, PCIe upstream and
downstream ports, etc -- see
<https://bugzilla.redhat.com/show_bug.cgi?id=1333238#c12> for more
details).
10 is not a whole lot, but closer to the architectural limit of 15 than
our current 4, so it can be considered a stop-gap solution until all
guests manage to migrate to virtio-1.0, and no longer need PCI IO BARs
behind PCIe downstream ports.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Make PcdPciIoBase and PcdPciIoSize dynamic PCDs, and set them in
MemMapInitialization(), where we produce our EFI_RESOURCE_IO descriptor
HOB. (The PCD is consumed by the core PciHostBridgeDxe driver, through our
PciHostBridgeLib instance.)
Take special care to keep the GCD IO space map unchanged on all platforms
OVMF runs on.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
In this patch, the AcpiTimerLib instances, ResetSystemLib, and PlatformPei
are modified together in order to keep VMs functional across a bisection:
they all must agree on the PMBA value used.
ResetSystemLib must not use dynamic PCDs. With SOURCE_DEBUG_ENABLE, it
gets linked into the debug agent, therefore the same restrictions apply to
it as to BaseRomAcpiTimerLib. Luckily, AcpiPmControl() is only used for
powering off the virtual machine, thus the extra cost of a PCI config
space read, compared to a PcdGet16(), should be negligible.
This is the patch that moves the PMBA to IO port 0x0600 on Q35 in
practice.
The ResetSystemLib change is easiest to verify with the "reset -s" command
in the UEFI shell (which goes through gRT->ResetSystem() and, in OVMF,
PcAtChipsetPkg/KbcResetDxe).
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
According to the ICH9 spec, PMBASE "provides 128 bytes of I/O space for
ACPI, GPIO, and TCO logic. This is placed on a 128-byte boundary".
On the Q35 machine type of QEMU, our current PMBASE setting of 0xB000 is
the only thing that prevents us from lowering the base of the PCI IO port
aperture from 0xC000. (The base must be aligned to 0x1000 due to PCI
bridge requirements.)
By moving our PMBASE to 0x0600 (moving the register block to
0x0600..0x067F inclusive), which is also what SeaBIOS uses on Q35, we will
be able to lower the PCI IO port aperture base to 0x6000 (the next IO port
under it being taken by the "vmport" device, at fixed 0x5658), while
steering clear of other QEMU devices.
On PIIX4, freeing up the 0x1000 IO ports at 0xB000 wouldn't help much,
because the 0xA000 block right below it is occupied by unmovable devices
(see <https://bugzilla.redhat.com/show_bug.cgi?id=1333238#c19> for
details).
Doing this for Q35 only has two more benefits:
- It won't interfere with Xen guests,
- The Q35 machine type with the smallest version number is "pc-q35-2.4",
which is guaranteed to have an ACPI generator. This matters because the
ACPI tables (FACP, DSDT) have to reflect the PM base address that we
program.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We already have the identical purpose (but different value) macro for
ICH9, namely ICH9_PMBASE_MASK in
"OvmfPkg/Include/IndustryStandard/Q35MchIch9.h".
Also, stop bit-negating signed integer constants.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
In the next patches, we'll differentiate the PMBA IO port address that we
program on PIIX4 vs. Q35.
Normally we'd just turn PcdAcpiPmBaseAddress into a dynamic PCD. However,
because we need this value in BaseRomAcpiTimerLib too (which cannot access
RAM and dynamic PCDs), it must remain a build time constant. We will
introduce its Q35 counterpart later.
As first step, replace the PCD with a new macro in "OvmfPlatforms.h";
Jordan prefers the latter to fixed PCDs in this instance.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
We should store the right value to the PMBA (if the PMBA needs
initialization) before setting mAcpiTimerIoAddr from the PMBA.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: f122712b42
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
CorebootPayloadPkg has been changed to use generic SerialDxe driver
from MdeModulePkg. As part of the clean-up, the overridden SerialDxe
and PciSioSerialDxe drivers in CorebootModulePkg need to be removed.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
When copy new string content to BufferValue, need to clean the
BufferValue firstly, or the BufferValue may contain some
content that doesn't belong to the new string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When submit form fail, the progress point to the first fail part
in ConfigResp, so should free the ConfigResp after Progrss has
been processed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Static storage duration objects that are internal to a library instance
should:
- either have internal linkage (i.e., be declared STATIC),
- or, if they are referenced in multiple files of the library instance,
prefixed with a word that is specific to the library instance, and
minimizes namespace collisions.
In this case, the "gHiiDriverList" variable (with static storage duration
and external linkage) is defined in both BootMaintenanceManagerUiLib and
UiApp. When these are linked together, GCC catches the multiple external
definitions and aborts the build. (GCC notices this due to commit
214a3b79417f.) Fix the error by applying the first rule above.
Fixes: a85be3ae48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Use the MSR MSR_IA32_MISC_ENABLE definition defined in UefiCpuPkg/Include and
remove the local definition.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BTS used DS save area by IA32_DS_AREA MSR to get invoker IP instead of the
Last Branch Record Stack. So, removed the unnecessary BTS MSRs.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
SmmProfile feature depends on BTS feature to get the invoker IP (in SMM) from
last branch record. If this feature is not supported, SmmProfile cannot get the
invoker IP (in SMM). Per IA-32 Architectures Software Developer's Manual, BTS
feature is detected by IA32_MISC_ENABLE. If BIT11 of IA32_MISC_ENABLE is set,
BTS is not supported. But current implementation check BIT11 opposite. Also, BTS
feature does not depends on PEBS feature if supported or not.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Shifflett, Joseph <joseph.shifflett@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Code changes enables HttpDxe to handle PUT/POST operations.
EfiHttpRequest assumes "Request" and "HttpMsg->Headers" can
never be NULL. Also, HttpResponseWorker assumes HTTP Reponse
will contain headers. We could have response which could contain
only a string (HTTP 100 Continue) and no headers. Code changes
tries to do-away from these assumptions, which would enable
HttpDxe to support PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P nagaraj-p.hegde@hpe.com
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Enable AES cipher support for SmmCryptLib instance.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The bug is use FILE_GUID override to build the same module more than
once, GenFds report warning "xxx NOT found in DSC file; Is it really
a binary module?". The root cause is the module path with FILE_GUID
overridden has the file name FILE_GUIDmodule.inf, then
PlatformDataBase.Modules use FILE_GUIDmodule.inf as key which cause
__GetPlatformArchList__ return empty.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
in the generated Asbuilt inf would include the driver's complete
dependency expression, and it would be wrote as comment format. Original
bug is mix the depex expression with real comment in the depex section.
this patch is ignore the real comment, and list the depex expression.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patches rename CoreGetMemoryMapPropertiesTable to
CoreGetMemoryMapWithSeparatedImageSection.
The reason is that CoreGetMemoryMapPropertiesTable is called
by MemoryAttributesTable.c to get separated PE image section
information.
It is confusing to use *PropertiesTable, because it is NOT
related to PropertiesTable.c
We rename it to avoid confusing.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister) &
EnableMask) != EnableMask)) {
The bracket place is not right, I think it should be
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister)) &
EnableMask) != EnableMask)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: wang xiaofeng <winggundum82@163.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Use generic SerialDxe driver in MdeModulePkg instead of the one
in CorebootModulePkg. By doing this the reference for
PciSioSerialDxe driver will also be removed from DSC and FDF file.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Add the missing EFIAPI to fix the inconsistent routine declaration and
implementation of a protocol service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>