Use QueueNumMax as QueueNum default for drivers which do not
explicitly call VIRTIO_DEVICE_PROTOCOL->SetQueueSize().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Virtio 1.0 allows a more flexible virtio ring layout, so we have to set
addresses for descriptors avail flags and use flags separately. We
continue to use a ring layout compatible with virtio 0.9.5 though, so no
other changes are needed to setup the virtio queues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Nothing to do here for virtio 1.0 devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add #defines for the Version field. Read and store the version,
log the version found as info message.
Continue to return UNSUPPORTED for now, we need some more patches
to complete virtio 1.0 support first.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BlobVerifierLib will be used to verify blobs fetching them from QEMU's
firmware config (fw_cfg) in platforms that enable such verification.
The null implementation BlobVerifierLibNull treats all blobs as valid.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Support QEMU's -kernel option.
Create a QemuKernel.c for PlatformBootManagerLibGrub
which is an exact copy of the file
PlatformBootManagerLib/QemuKernel.c .
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Make it clear that X86QemuLoadImageLib relies on fw_cfg; prepare the
ground to add a warning about the incompatibility with boot verification
process.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210628105110.379951-6-dovmurik@linux.ibm.com>
Remove the QemuFwCfgLib interface used to read the QEMU cmdline
(-append argument) and the initrd size. Instead, use the synthetic
filesystem QemuKernelLoaderFs which has three files: "kernel", "initrd",
and "cmdline".
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20210628105110.379951-5-dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When QemuLoadKernelImage() ends successfully, the command-line blob is
not freed, even though it is not used elsewhere (its content is already
copied to KernelLoadedImage->LoadOptions). The memory leak bug was
introduced in commit 7c47d89003 ("OvmfPkg: implement QEMU loader
library for X86 with legacy fallback", 2020-03-05).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Fixes: 7c47d89003
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20210628105110.379951-3-dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When QemuLoadKernelImage() ends successfully, the command-line blob is
not freed, even though it is not used elsewhere (its content is already
copied to KernelLoadedImage->LoadOptions). The memory leak bug was
introduced in commit ddd2be6b00 ("OvmfPkg: provide a generic
implementation of QemuLoadImageLib", 2020-03-05).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Fixes: ddd2be6b00
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20210628105110.379951-2-dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Rename "XenSupport.c" to "ScanForRootBridges.c", after the main function
in it.
Update the file-top comments; refer to both Bhyve and Xen.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-36-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLibScan/PciHostBridgeLibScan.inf"
instance is used in the following platforms in edk2:
OvmfPkg/Bhyve/BhyveX64.dsc
OvmfPkg/OvmfXen.dsc
Neither Bhyve nor Xen provide a Q35 board, therefore the expression
PcdGet16 (PcdOvmfHostBridgePciDevId) != INTEL_Q35_MCH_DEVICE_ID
always evaluates to TRUE, in the PciHostBridgeLibScan instance.
Replace the expression with constant TRUE, eliminating the PCD dependency.
(In effect, this reports that the root bridge being registered does not
support extended PCI config space.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-35-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLibScan/PciHostBridgeLibScan.inf"
instance is used in the following platforms in edk2:
OvmfPkg/Bhyve/BhyveX64.dsc
OvmfPkg/OvmfXen.dsc
Both platforms define "PcdPciDisableBusEnumeration" with Fixed-at-Build
access method, and TRUE value. Remove the PCD from the
PciHostBridgeLibScan instance, and everything else that is useful only
when the PCD is FALSE.
In practice, this removes the PciHostBridgeUtilityGetRootBridges()
function call, which is based on fw-cfg; see
"OvmfPkg/Library/PciHostBridgeUtilityLib/PciHostBridgeUtilityLib.c".
(Note that the dependency on PciHostBridgeUtilityLib remains in place,
given that the PciHostBridgeLibScan instance continues using lower-level
functions from the library that do not depend on fw-cfg.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-34-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf" instance is
used by the following platforms in edk2:
OvmfPkg/AmdSev/AmdSevX64.dsc
OvmfPkg/OvmfPkgIa32.dsc
OvmfPkg/OvmfPkgIa32X64.dsc
OvmfPkg/OvmfPkgX64.dsc
All these platforms statically inherit PcdPciDisableBusEnumeration=FALSE
from "MdeModulePkg.dec". Remove the the PCD and everything that depends on
it from the PciHostBridgeLib instance. Namely, remove the logic that
determines the root bridge apertures by (a) scanning the entire bus,
device and function number space, and (b) parsing the BAR values that were
pre-set by the Bhyve or Xen machinery.
"XenSupport.c" used to be listed explicitly in "Maintainers.txt", remove
it from that spot too.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-33-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Create an almost verbatim copy of the
"OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf" library instance.
The new PciHostBridgeLibScan instance will ultimately duplicate a
negligible amount of code from the original, and will be used by the Bhyve
and OvmfXen platforms.
List the new driver in "Maintainers.txt", in the "OvmfPkg: bhyve-related
modules" and "OvmfPkg: Xen-related modules" sections.
This patch should be reviewed with "git show --find-copies-harder".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-30-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
- In every C file, list every necessary public #include individually, with
an example identifier that's actually consumed.
- Place all public #includes first, all module-private #includes second.
Separate them with a single empty line. Keep each section sorted in
itself.
- Sort all sections in the INF file, except [Defines].
- Add unlisted lib classes.
- Remove unnecessary #include directives, add unlisted #include
directives.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-29-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This error was found while compiling VirtioMmioDeviceLib for X64
with the GCC5 toolchain, where EFIAPI makes a difference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210602045935.762211-1-kraxel@redhat.com>
[lersek@redhat.com: prepend module name to subject, trim subject back to
allowed length]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The Flush parameter is used to provide a hint whether the specified range
is Mmio address. Now that we have a dedicated helper to clear the
memory encryption mask for the Mmio address range, its safe to remove the
Flush parameter from MemEncryptSev{Set,Clear}PageEncMask().
Since the address specified in the MemEncryptSev{Set,Clear}PageEncMask()
points to a system RAM, thus a cache flush is required during the
encryption mask update.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210519181949.6574-14-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSevClearMmioPageEncMask() helper can be used for clearing
the memory encryption mask for the Mmio region.
The MemEncryptSevClearMmioPageEncMask() is a simplified version of
MemEncryptSevClearPageEncMask() -- it does not flush the caches after
clearing the page encryption mask.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210519181949.6574-10-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
Enabling TPM support results in guest termination of an SEV-ES guest
because it uses MMIO opcodes that are not currently supported.
Add support for the new MMIO opcodes (0xA0 - 0xA3), MOV instructions which
use a memory offset directly encoded in the instruction. Also, add a DEBUG
statement to identify an unsupported MMIO opcode being used.
Fixes: c45f678a1e
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <2fdde57707b52ae39c49341c9d97053aaff56e4a.1619716333.git.thomas.lendacky@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
The MOVZX and MOVSX instructions use the ModRM byte in the instruction,
but the instruction decoding support was not decoding it. This resulted
in invalid decoding and failing of the MMIO operation. Also, when
performing the zero-extend or sign-extend operation, the memory operation
should be using the size, and not the size enumeration value.
Add the ModRM byte decoding for the MOVZX and MOVSX opcodes and use the
true data size to perform the extend operations. Additionally, add a
DEBUG statement identifying the MMIO address being flagged as encrypted
during the MMIO address validation.
Fixes: c45f678a1e
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <5949d54cb2c9ab69256f67ed5654b32654c0501c.1619716333.git.thomas.lendacky@amd.com>
We are going to use the page table structure in yet another place,
collect the types and macro that can be used from another module
rather than making yet another copy.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2490
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <20210412133003.146438-5-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The CommandLine and InitrdData may be set to NULL if the provided
size is too large. Because the zero page is mapped, this would not
cause an immediate crash but can lead to memory corruption instead.
This patch just adds validation and returns error if either allocation
has failed.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Message-Id: <YFPJsaGzVWQxoEU4@martin-ThinkPad-T440p>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
[lersek@redhat.com: drop unnecessary empty line from code; remove personal
(hence likely unstable) repo reference from commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Call the CPU hot-eject handler if one is installed. The condition for
installation is (PcdCpuMaxLogicalProcessorNumber > 1), and there's
a hot-unplug request.
The handler is called from SmmCpuFeaturesRendezvousExit(), which is
in-turn called at the tail-end of SmiRendezvous() after the BSP has
signalled an SMI exit via the "AllCpusInSync" loop.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-8-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Init CPU_HOT_EJECT_DATA, which will be used to share CPU ejection
state between SmmCpuFeaturesLib (via PiSmmCpuDxeSmm) and CpuHotPlugSmm.
The init happens via SmmCpuFeaturesSmmRelocationComplete(), and so it
will run as part of the PiSmmCpuDxeSmm entry point function,
PiCpuSmmEntry(). Once inited, CPU_HOT_EJECT_DATA is exposed via
PcdCpuHotEjectDataAddress.
The CPU hot-eject handler (CPU_HOT_EJECT_DATA->Handler) is setup when
there is an ejection request via CpuHotplugSmm.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-7-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Extend parameter list of PciHostBridgeUtilityGetRootBridges() with BusMin/
BusMax, so that the utility function could be compatible with ArmVirtPkg
who uses mutable bus range [BusMin, BusMax] insteand of [0, PCI_MAX_BUS].
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210119011302.10908-10-cenjiahui@huawei.com>
[lersek@redhat.com: fix logging of UINTN values BusMin, BusMax]
[lersek@redhat.com: keep zeroing of (*Count) centralized]
[lersek@redhat.com: fix typos in ExtraRootBridges comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
OvmfPkg/PciHostBridgeLib instance fails to list its PcdLib dependency,
both between the #include directives, and in the INF file. So let's list
the dependency.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210119011302.10908-4-cenjiahui@huawei.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
When SEV-ES is active, and MMIO operation will trigger a #VC and the
VmgExitLib exception handler will process this MMIO operation.
A malicious hypervisor could try to extract information from encrypted
memory by setting a reserved bit in the guests nested page tables for
a non-MMIO area. This can result in the encrypted data being copied into
the GHCB shared buffer area and accessed by the hypervisor.
Prevent this by ensuring that the MMIO source/destination is un-encrypted
memory. For the APIC register space, access is allowed in general.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0cf28470ad5e694af45f7f0b35296628f819567d.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to be able to issue messages or make interface calls that cause
another #VC (e.g. GetLocalApicBaseAddress () issues RDMSR), add support
for nested #VCs.
In order to support nested #VCs, GHCB backup pages are required. If a #VC
is received while currently processing a #VC, a backup of the current GHCB
content is made. This allows the #VC handler to continue processing the
new #VC. Upon completion of the new #VC, the GHCB is restored from the
backup page. The #VC recursion level is tracked in the per-vCPU variable
area.
Support is added to handle up to one nested #VC (or two #VCs total). If
a second nested #VC is encountered, an ASSERT will be issued and the vCPU
will enter CpuDeadLoop ().
For SEC, the GHCB backup pages are reserved in the OvmfPkgX64.fdf memory
layout, with two new fixed PCDs to provide the address and size of the
backup area.
For PEI/DXE, the GHCB backup pages are allocated as boot services pages
using the memory allocation library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <ac2e8203fc41a351b43f60d68bdad6b57c4fb106.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Update the MemEncryptSevLib library to include an interface that can
report the encryption state on a range of memory. The values will
represent the range as being unencrypted, encrypted, a mix of unencrypted
and encrypted, and error (e.g. ranges that aren't mapped).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0d98f4d42a2b67310c29bac7bcdcf1eda6835847.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In preparation for a new interface to be added to the MemEncryptSevLib
library that will be used in SEC, create an SEC version of the library.
This requires the creation of SEC specific files.
Some of the current MemEncryptSevLib functions perform memory allocations
which cannot be performed in SEC, so these interfaces will return an error
during SEC. Also, the current MemEncryptSevLib library uses some static
variables to optimize access to variables, which cannot be used in SEC.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <bc7fa76cc23784ab3f37356b6c10dfec61942c38.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Creating an SEC version of the library requires renaming an existing file
which will result in the existing code failing ECC. Prior to renaming the
existing file, fix the coding style to avoid the ECC failure.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f765d867da4a703e0a0db35e26515a911482fd40.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Check the DR7 cached indicator against a specific value. This makes it
harder for a hypervisor to just write random data into that field in an
attempt to use an invalid DR7 value.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <65157c1155a9c058c43678400dfc0b486e327a3e.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
The early assembler code performs validation for some of the SEV-related
information, specifically the encryption bit position. The new
MemEncryptSevGetEncryptionMask() interface provides access to this
validated value.
To ensure that we always use a validated encryption mask for an SEV-ES
guest, update all locations that use CPUID to calculate the encryption
mask to use the new interface.
Also, clean up some call areas where extra masking was being performed
and where a function call was being used instead of the local variable
that was just set using the function.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <9de678c0d66443c6cc33e004a4cac0a0223c2ebc.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
To ensure that we always use a validated encryption mask for an SEV-ES
guest, create a new interface in the MemEncryptSevLib library to return
the encryption mask. This can be used in place of the multiple locations
where CPUID is used to retrieve the value (which would require validation
again) and allows the validated mask to be returned.
The PEI phase will use the value from the SEV-ES work area. Since the
SEV-ES work area isn't valid in the DXE phase, the DXE phase will use the
PcdPteMemoryEncryptionAddressOrMask PCD which is set during PEI.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e12044dc01b21e6fc2e9535760ddf3a38a142a71.1610045305.git.thomas.lendacky@amd.com>
This patch fixes an issue with the current programming of the i440fx
PCI Interrupt routing assignment.
Explanation by Laszlo Ersek:
(1) The rotating pattern is a map:
(slot, function) --> (interrupt link) [LNKA..LNKD]
(more precisely, it is a pattern from (slot, pin) to (interrupt link),
but function<->pin is an identity mapping in the QEMU hardware, so we
can just use (slot, function) rather than (slot, pin) on the left hand
side. But I digress.)
The ACPI _PRT object is generated by QEMU; it describes this map.
(2) Another map is
(interrupt link) --> { set of possible interrupt numbers,
for this link }
This map is given by the LNK[A..D] ACPI objects, also given by QEMU.
(3) What the firmware is expected to do is:
(3a) for each interrupt link, select an *actual* interrupt from the set
that's possible for that link, yielding a deterministic map
(interrupt link) --> (actual interrupt number)
and
(3b) for each PCI device/function with an interrupt pin, resolve the
(slot, function) --> (interrupt link) --> (actual interrupt number)
functional composition, and program the result into the Interrupt Line
register of the device.
In OVMF, we do not parse the rotating map described under (1) from
QEMU's _PRT object. Instead, we duplicate the code. This is not a
problem.
In OVMF, we also do not parse the map described under (2) from QEMU's
ACPI content. Instead, we pick a specific selection (3a) that we
"apriori" know satisfies (2). This is also not a problem. OVMF's
particular selection is the PciHostIrqs table.
(
Table (2) from QEMU is
LNKA -> { 5, 10, 11 }
LNKB -> { 5, 10, 11 }
LNKC -> { 5, 10, 11 }
LNKD -> { 5, 10, 11 }
and our specific pick in OVMF, in the PciHostIrqs table, is
LNKA -> 10
LNKB -> 10
LNKC -> 11
LNKD -> 11
)
In OVMF, we also cover step (3b), in the SetPciIntLine() function.
What's missing in OVMF -- and what this patch corrects -- is that we
currently fail to program our selection for table (3) into the hardware.
We pick a specific LNKx->IRQ# mapping for each interrupt link, and we
correctly program the PCI Interrupt Line registers through those
link-to-IRQ mappings -- but we don't tell the hardware about the
link-to-IRQ mappings. More precisely, we program such a link-to-IRQ
mapping table into the hardware that is then not matched by the mapping
we use for programming the PCI device/function interrupt lines. As a
result, some PCI Interrupt Line registers will have impossible values --
a given (slot, function) may use a particular link, but also report an
interrupt number that was never picked for that link.
Output of Linux PCI Interrupt Links for i440fx before the patch:
[ 0.327305] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
[ 0.327944] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.328582] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[ 0.329208] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10 11)
[ 0.329807] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
after the patch:
[ 0.327292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.327934] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.328564] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.329195] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.329785] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
Output of Linux PCI Interrupt Links for q35 before the patch:
[ 0.307474] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.308027] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.308764] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.309310] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.309853] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.310508] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.311051] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.311589] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
after the patch:
[ 0.301991] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.302833] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.303354] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.303873] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.304399] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.304918] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.305436] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.305954] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <8dbedc4c7a1c3fd390aca915270814e3b35e13a5.camel@amazon.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is used to package up the grub bootloader into a firmware volume
where it can be executed as a shell like the UEFI Shell. Grub itself
is built as a minimal entity into a Fv and then added as a boot
option. By default the UEFI shell isn't built but for debugging
purposes it can be enabled and will then be presented as a boot option
(This should never be allowed for secure boot in an external data
centre but may be useful for local debugging). Finally all other boot
options except grub and possibly the shell are stripped and the boot
timeout forced to 0 so the system will not enter a setup menu and will
only boot to grub. This is done by copying the
Library/PlatformBootManagerLib into Library/PlatformBootManagerLibGrub
and then customizing it.
Boot failure is fatal to try to prevent secret theft.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Message-Id: <20201130202819.3910-4-jejb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
[lersek@redhat.com: replace local variable initialization with assignment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: squash 'OvmfPkg: add "gGrubFileGuid=Grub" to
GuidCheck.IgnoreDuplicates', reviewed stand-alone by Phil (msgid
<e6eae551-8563-ccfb-5547-7a97da6d46e5@redhat.com>) and Ard (msgid
<10aeda37-def6-d9a4-6e02-4c66c1492f57@arm.com>)]
Fix the order of libraries and update INF_VERSION to 1.29.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-4-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
The code style in Library/BhyveFwCtlLib/BhyveFwCtlLib.c was very
inconsistent. Fix it to pass the ECC tool checks by typedef'ing
structs, and improve indentation.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-3-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Update BhyveFwCtlLib.c to fix problems with UINT32/UINTN types that
prevented Bhyve from building with VS2019.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-2-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
On bhyve, either an Intel or AMD host bridge can be specified, with the
default being Intel.
Both are identical, except the AMD one uses a PCI vendor ID of AMD.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201124005733.18107-3-rebecca@bsdio.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The QemuFlashPtrWrite() flash services runtime uses the GHCB and VmgExit()
directly to perform the flash write when running as an SEV-ES guest. If an
interrupt arrives between VmgInit() and VmgExit(), the Dr7 read in the
interrupt handler will generate a #VC, which can overwrite information in
the GHCB that QemuFlashPtrWrite() has set. This has been seen with the
timer interrupt firing and the CpuExceptionHandlerLib library code,
UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/
Xcode5ExceptionHandlerAsm.nasm and
ExceptionHandlerAsm.nasm
reading the Dr7 register while QemuFlashPtrWrite() is using the GHCB. In
general, it is necessary to protect the GHCB whenever it is used, not just
in QemuFlashPtrWrite().
Disable interrupts around the usage of the GHCB by modifying the VmgInit()
and VmgDone() interfaces:
- VmgInit() will take an extra parameter that is a pointer to a BOOLEAN
that will hold the interrupt state at the time of invocation. VmgInit()
will get and save this interrupt state before updating the GHCB.
- VmgDone() will take an extra parameter that is used to indicate whether
interrupts are to be (re)enabled. Before exiting, VmgDone() will enable
interrupts if that is requested.
Fixes: 437eb3f7a8
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c326a4fd78253f784b42eb317589176cf7d8592a.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bit for the scratch
area field (SwScratch).
Fixes: c45f678a1e
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <45ccb63c2dadd834e2c47bf10c9e59c6766d7eb6.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bit for the scratch
area field (SwScratch).
Fixes: 0020157a98
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f817d034cea37fa78e00e86f61c3445f1208226d.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bits for the
software exit information fields when performing a VMGEXIT (SwExitCode,
SwExitInfo1, SwExitInfo2).
Fixes: 61bacc0fa1
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <986e157c13bf33e529b1d16ab1b52e99a74a734f.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The VmgExitLib library added two new interfaces, VmgSetOffsetValid() and
VmgIsOffsetValid(), that must now be implemented in the OvmfPkg version
of the library.
Implement VmgSetOffsetValid() and VmgIsOffsetValid() and update existing
code, that is directly accessing ValidBitmap, to use the new interfaces.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <939e9dc375e6085bc67942fe9a00ecd4c6b77ecf.1604685192.git.thomas.lendacky@amd.com>
There is a DEBUG warning printout in VirtioMmioDeviceLib if the current
device's VendorID does not match the traditional 16-bit Red Hat PCIe
vendor ID used with virtio-pci. The virtio-mmio vendor ID is 32-bit and
has no connection to the PCIe registry.
Most specifically, this causes a bunch of noise when booting an AArch64
QEMU platform, since QEMU's virtio-mmio implementation used 'QEMU' as
the vendor ID:
VirtioMmioInit: Warning:
The VendorId (0x554D4551) does not match the VirtIo VendorId (0x1AF4).
Drop the warning message.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Create a function that can be used to determine if the VM is running
as an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a DR7 read or write intercept generates a #VC exception.
The #VC handler must provide special support to the guest for this. On
a DR7 write, the #VC handler must cache the value and issue a VMGEXIT
to notify the hypervisor of the write. However, the #VC handler must
not actually set the value of the DR7 register. On a DR7 read, the #VC
handler must return the cached value of the DR7 register to the guest.
VMGEXIT is not invoked for a DR7 register read.
The caching of the DR7 values will make use of the per-CPU data pages
that are allocated along with the GHCB pages. The per-CPU page for a
vCPU is the page that immediately follows the vCPU's GHCB page. Since
each GHCB page is unique for a vCPU, the page that follows becomes
unique for that vCPU. The SEC phase will reserves an area of memory for
a single GHCB and per-CPU page for use by the BSP. After transitioning
to the PEI phase, new GHCB and per-CPU pages are allocated for the BSP
and all APs.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MWAIT/MWAITX intercept generates a #VC exception.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MONITOR/MONITORX intercept generates a #VC exception.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDTSCP intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a VMMCALL intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a INVD intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDPMC intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDTSC intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a WBINVD intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a NPF intercept for an NPT entry with a reserved bit set
generates a #VC exception. This condition is assumed to be an MMIO access.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a NPF NAE
event for MMIO. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXIT_INFO1, SW_EXITINFO2 and SW_SCRATCH values in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MSR_PROT intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support an MSR_PROT
NAE event. Parse the instruction that generated the #VC exception to
determine whether it is RDMSR or WRMSR, setting the required register
register values in the GHCB and creating the proper SW_EXIT_INFO1 value in
the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a CPUID intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a CPUID NAE
event. Additionally, CPUID 0x0000_000d (CPUID_EXTENDED_STATE) requires
XCR0 to be supplied in the GHCB, so add support to issue the XGETBV
instruction.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Add support to the #VC exception handler to handle string IO. This
requires expanding the IO instruction parsing to recognize string based
IO instructions as well as preparing an un-encrypted buffer to be used
to transfer (either to or from the guest) the string contents for the IO
operation. The SW_EXITINFO2 and SW_SCRATCH fields of the GHCB are set
appropriately for the operation. Multiple VMGEXIT invocations may be
needed to complete the string IO operation.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The base VmgExitLib library provides a default limited interface. As it
does not provide full support, create an OVMF version of this library to
begin the process of providing full support of SEV-ES within OVMF.
SEV-ES support is only provided for X64 builds, so only OvmfPkgX64.dsc is
updated to make use of the OvmfPkg version of the library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Sean reports that having two DEC files under OvmfPkg violates the DEC
spec:
> An EDK II Package (directory) is a directory that contains an EDK II
> package declaration (DEC) file. Only one DEC file is permitted per
> directory. EDK II Packages cannot be nested within other EDK II
> Packages.
This issue originates from commit 656419f922 ("Add BhyvePkg, to support
the bhyve hypervisor", 2020-07-31).
Remedy the problem as follows. (Note that these steps are not split to
multiple patches in order to keep Bhyve buildable across the transition.)
(1) Delete "OvmfPkg/Bhyve/BhyvePkg.dec".
(2) Point the [Packages] sections of the Bhyve-specific AcpiPlatformDxe,
BhyveRfbDxe, and BhyveFwCtlLib INF files to "OvmfPkg.dec".
(3) Migrate the artifacts that "BhyvePkg.dec" used to have on top of
"OvmfPkg.dec" as follows:
(3a) Merge the copyright notices from Rebecca Cran and Pluribus Networks
into "OvmfPkg.dec".
(3b) Merge the "BhyveFwCtlLib" class header definition into "OvmfPkg.dec".
(3c) Merge value 0x2F8 for the fixed PcdDebugIoPort into
"BhyvePkgX64.dsc".
(4) Unnest the the Include/Library/ and Library/ subtrees from under
OvmfPkg/Bhyve to the corresponding, preexistent subtrees in OvmfPkg.
The goal is to keep the [Includes] section in the "OvmfPkg.dec" file
unchanged, plus simplify references in "BhyvePkgX64.dsc". Non-library
modules remain under "OvmfPkg/Bhyve/".
(4a) The BhyveFwCtlLib class header, and sole instance, are already
uniquely named, so their movements need not involve file renames.
(4b) Rename the Bhyve-specific PlatformBootManagerLib instance to
PlatformBootManagerLibBhyve, in additon to moving it, for
distinguishing it from OvmfPkg's preexistent lib instance. Apply the
name change to all three of the lib instance directory name, the INF
file, and the BASE_NAME define in the INF file.
(4c) Update lib class resolutions in "BhyvePkgX64.dsc" accordingly.
(5) Replace the "ACPI table storage" FILE_GUID in
"OvmfPkg/Bhyve/AcpiTables/AcpiTables.inf" with a new GUID, and
open-code the "ACPI table storage" GUID in the "ACPITABLE" FDF rule
instead, replacing $(NAMED_GUID). This step is necessary because CI
requires unique FILE_GUIDs over all INF files, and OVMF's original
"AcpiTables.inf" already uses the "ACPI table storage" GUID as
FILE_GUID.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sean Brogan <spbrogan@outlook.com>
Fixes: 656419f922
Reported-by: Sean Brogan <spbrogan@outlook.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200801155024.16439-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
gBS->LoadImage() returning EFI_NOT_FOUND is an expected condition; it
means that QEMU wasn't started with "-kernel". Log this status code as
INFO rather than ERROR.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200609105414.12474-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
When an image fails Secure Boot validation, LoadImage() returns
EFI_SECURITY_VIOLATION if the platform policy is
DEFER_EXECUTE_ON_SECURITY_VIOLATION.
If the platform policy is DENY_EXECUTE_ON_SECURITY_VIOLATION, then
LoadImage() returns EFI_ACCESS_DENIED (and the image does not remain
loaded).
(Before <https://bugzilla.tianocore.org/show_bug.cgi?id=2129>, this
difference would be masked, as DxeImageVerificationLib would incorrectly
return EFI_SECURITY_VIOLATION for DENY_EXECUTE_ON_SECURITY_VIOLATION as
well.)
In X86QemuLoadImageLib, proceed to the legacy Linux/x86 Boot Protocol upon
seeing EFI_ACCESS_DENIED too.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2785
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200605235242.32442-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add a null implementation library for QemuFwCfgLib, in order to
support building PciHostBridgeLib for bhyve.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200503230910.26783-1-rebecca@bsdio.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On bhyve, the ACPI timer is located at a fixed IO address; it need
not be programmed into, nor fetched from, the PMBA -- power
management base address -- register of the PCI host bridge.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20200430011212.612386-1-rebecca@bsdio.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a minimal, NULL class library called "PxeBcPcdProducerLib" for setting
the "PcdIPv4PXESupport" and "PcdIPv6PXESupport" PCDs of NetworkPkg, from
fw_cfg.
These PCDs control whether the UefiPxeBcDxe driver supports PXEv4 / PXEv6
boot. If a PXE version is disabled, the corresponding LoadFile protocol
instance is not produced by UefiPxeBcDxe, and so
EfiBootManagerRefreshAllBootOption() in UefiBootManagerLib does not
generate corresponding *new* boot options either. (Existent boot options
are not deleted.)
Hook the library into the UefiPxeBcDxe driver. (The driver is already
included from "NetworkComponents.dsc.inc", but we can list it again in the
DSC file, for providing <LibraryClasses> overrides.)
In OVMF, the PCDs could be set in PlatformPei too, but ArmVirtQemu does
not have fw_cfg access in the PEI phase. Hence a NULL class library that
can be linked into UefiPxeBcDxe.
When listing the PCDs under [PcdsDynamicDefault], stick with the DEC
default values.
QEMU switches:
-fw_cfg name=opt/org.tianocore/IPv4PXESupport,string=[yn]
-fw_cfg name=opt/org.tianocore/IPv6PXESupport,string=[yn]
The "opt/org.tianocore" prefix follows the "opt/RFQDN/" recommendation
from QEMU's "docs/specs/fw_cfg.txt".
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't distribute UEFI_DRIVER modules stand-alone that were built as
part of an OVMF platform. OVMF's UEFI_DRIVERs are allowed to inherit
platform dependencies.
By enabling UEFI_DRIVERs to consume QemuFwCfgDxeLib, we can hook
fw_cfg-based NULL class libraries into UEFI drivers, e.g. in order to set
dynamic PCDs.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We already parse some boolean and integer values from named fw_cfg files
(usually into PCDs), and we're going to cover more. Add a dedicated
library for centralizing the parsing logic.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce PlatformRomDebugLibIoPortNocheck which doesn't try to detect
the debug IO port. Instead, debug logs are always written to the IO port.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-5-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Factor out debug port detection in PlatformDebugLibIoPort.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-4-anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We are going to reuse PlatformDebugLibIoPort to use debug IO port from
hypervisors that aren't QEMU, so reword "QEMU" to "hypervisor" in the
descriptions.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-3-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseResetSystemLib instance is not suitable for OS runtime, because
its ResetShutdown() implementation calls PciRead16 (OVMF_HOSTBRIDGE_DID).
On q35, this boils down to a memory-mapped config space access -- but we
never ask the OS to map MMCONFIG for runtime.
There are at least three alternatives to approach this:
(1) Investigate "MdePkg/Library/DxeRuntimePciExpressLib", which offers
some kind of runtime mapping for MMCONFIG.
(2) Consume PciCf8Lib directly, rather than PciLib, in ResetSystemLib.
Then we'll read OVMF_HOSTBRIDGE_DID from the config space with IO port
accesses on q35 too, not just on i440fx. IO ports don't depend on page
tables.
(3) In the lib constructor, cache "mAcpiPmBaseAddress" based on
"PcdOvmfHostBridgePciDevId" (which is set by PlatformPei). Then the
host bridge type will be known at runtime without PCI config space
accesses.
This patch follows approach (3), in order to mirror AcpiTimerLib.
Notes:
* This patch is best viewed with "git show --find-copies-harder -C43".
* PCDs are not usable in the DXE_CORE, as the PCD PPI is gone, and the PCD
protocol is not available yet. (The DXE_CORE does consume ResetSystemLib
in practice, when OVMF is built with -D SOURCE_DEBUG_ENABLE.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
[lersek@redhat.com: move third Note (with repro info) to BZ comment]
In preparation for introducing DxeResetSystemLib, rename the current
(only) ResetSystemLib instance to BaseResetSystemLib.
In the DSC files, keep the ResetSystemLib resolution in the same
[LibraryClasses] section, but move it near the TimerLib resolution, as the
differences between the ResetSystemLib instances will mostly follow those
seen under OvmfPkg/Library/AcpiTimerLib.
(While OvmfXen does not use "OvmfPkg/Library/AcpiTimerLib", perform the
same movement there too, for keeping future DSC diffing simple.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-6-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Move the ResetShutdown() definition to its own file. This will help us
introduce:
- a new library instance that is not broken in runtime modules (the
current library instance is broken in runtime modules),
- another new library instance for bhyve support.
While at it, squash AcpiPmControl() into ResetShutdown(), open-coding
SuspendType=0. This is justified because we've had no other callers for
AcpiPmControl() since commit 2d9950a2bf ("OvmfPkg: remove
EnterS3WithImmediateWake () from ResetSystemLib", 2020-01-10).
Tested with the "reset -s" UEFI shell command, on both i440fx and q35.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-5-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The cases under ResetSystem() currently mix "break"s with "return"s for no
good reason. Use "break" consistently.
(The inconsistency was introduced in commit 84c0b80de7,
"OvmfPkg/ResetSystemLib: Add new API ResetSystem", 2019-04-28.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-4-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Annotate the #include directives with the interfaces that this lib
instance needs from the included lib class headers. This will help us keep
the #include set minimal, when we move code around later.
While at it, synchronize the [LibraryClasses] section with the #include
directives -- list BaseLib.
Also #include the ResetSystemLib class header, which declares the
interfaces that this lib instance implements.
This forces us to spell out the "MdeModulePkg.dec" dependency too, under
[Packages].
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Building OVMF for X64 with secure boot enabled on VS2019 results in
the following error:
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
error C2220: the following warning is treated as an error
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data
Suppress the error by making the cast explicit.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2636
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
GCC 4.8 or 4.9 may throw the following error when building OVMF:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:
In function ‘QemuLoadKernelImage’:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:416:30:
error: ‘CommandLine’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
UnicodeSPrintAsciiFormat (
cc1: all warnings being treated as errors
This is due to the fact that older GCCs fail to infer that CommandLine is
never actually used unless it has been assigned. So add a redundant NULL
assignment to help these older GCCs understand this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2630
Fixes: 7c47d89003 ("OvmfPkg: implement QEMU loader library for X86 with ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2582
warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data
With this fix, OvmfIa32, OvmfX64 and OvmfIa32X64 can pass build.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When the MDE_CPU_IA32 macro is not defined, there is no access to the
"KernelImageHandle" local variable in QemuStartKernelImage(). This breaks
the OvmfPkgIa32X64 and OvmfPkgX64 platform builds, at least with gcc-8.
Move the local variable to the inner scope, where declaration and usage
are inseparable.
(Note that such inner-scope declarations are frowned upon in the wider
edk2 codebase, but we use them liberally in ArmVirtPkg and OvmfPkg anyway,
because they help us reason about variable lifetime and visibility.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 7c47d89003
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2572
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Replace the open coded sequence to load Linux on x86 with a short and
generic sequence invoking QemuLoadImageLib, which can be provided by
a generic version that only supports the LoadImage and StartImage boot
services, and one that incorporates the entire legacy loading sequence
as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement another version of QemuLoadImageLib that uses LoadImage and
StartImage, but falls back to the legacy Linux loader code if that
fails. The logic in the legacy fallback routines is identical to the
current QEMU linux loader for X64 and IA32.
Note the use of the OVMF_LOADED_X86_LINUX_KERNEL protocol for the legacy
loaded image: this makes it possible to expose the LoadImage/StartImage
abstraction for the legacy loader, using the EFI paradigm of identifying
a loaded image solely by a handle.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement QemuLoadImageLib, and make it load the image provided by the
QEMU_EFI_LOADER_FS_MEDIA_GUID/kernel device path that we implemented
in a preceding patch in a separate DXE driver, using only the standard
LoadImage and StartImage boot services.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
With "PcdCpuSmmEnableBspElection" set to FALSE, PiSmmCpuDxeSmm always
considers the processor with index 0 to be the SMM Monarch (a.k.a. the SMM
BSP). The SMM Monarch handles the SMI for real, while the other CPUs wait
in their SMM loops.
In a subsequent patch, we want to set "PcdCpuHotPlugSupport" to TRUE. For
that, PiCpuSmmEntry() [UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c] forces
us with an ASSERT() to set "PcdCpuSmmEnableBspElection" to TRUE as well.
To satisfy that expectation, we can simply remove our current
"PcdCpuSmmEnableBspElection|FALSE" setting, and inherit the default TRUE
value from "UefiCpuPkg.dec".
This causes "mSmmMpSyncData->BspIndex" in PiSmmCpuDxeSmm to lose its
static zero value (standing for CPU#0); instead it becomes (-1) in
general, and the SMM Monarch is elected anew on every SMI.
The default SMM Monarch Election is basically a race -- whichever CPU can
flip "mSmmMpSyncData->BspIndex" from (-1) to its own index, becomes king,
for handling that SMI. Refer to SmiRendezvous()
[UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c].
I consider this non-determinism less than ideal on QEMU/KVM; it would be
nice to stick with a "mostly permanent" SMM Monarch even with the Election
enabled. We can do that by implementing the PlatformSmmBspElection() API
in the SmmCpuPlatformHookLibQemu instance:
The IA32 APIC Base MSR can be read on each CPU concurrently, and it will
report the BSP bit as set only on the current Boot Service Processor. QEMU
marks CPU#0 as the BSP, by default.
Elect the current BSP, as reported by QEMU, for the SMM Monarch role.
(Note that the QEMU commit history is not entirely consistent on whether
QEMU/KVM may mark a CPU with nonzero index as the BSP:
- At tag v4.2.0, "target/i386/cpu.c" has a comment saying "We hard-wire
the BSP to the first CPU". This comment goes back to commit 6cb2996cef5e
("x86: Extend validity of bsp_to_cpu", 2010-03-04).
- Compare commit 9cb11fd7539b ("target-i386: clear bsp bit when
designating bsp", 2015-04-02) though, especially considering KVM.
Either way, this OvmfPkg patch is *not* dependent on CPU index 0; it just
takes the race on every SMI out of the game.)
One benefit of using a "mostly permanent" SMM Monarch / BSP is that we can
continue testing the SMM CPU synchronization by deterministically entering
the firmware on the BSP, vs. on an AP, from Linux guests:
$ time taskset -c 0 efibootmgr
$ time taskset -c 1 efibootmgr
(See
<https://github.com/tianocore/tianocore.github.io/wiki/Testing-SMM-with-QEMU,-KVM-and-libvirt#uefi-variable-access-test>.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512#c5
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Clone the Null instance of SmmCpuPlatformHookLib from UefiCpuPkg to
OvmfPkg. In this patch, customize the lib instance only with the following
no-op steps:
- Replace Null/NULL references in filenames and comments with Qemu/QEMU
references.
- Update copyright notices.
- Clean up and rewrap comment blocks.
- Update INF_VERSION to the latest INF spec version (1.29).
- Update FILE_GUID.
- Drop the UNI file.
This patch is best reviewed with:
$ git show --find-copies=43 --find-copies-harder
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fix various typos in comments and documentation.
When "VbeShim.asm" is modified, we have to re-run "VbeShim.sh"
to update "VbeShim.h".
The string modified by this patch is only used when the DEBUG
macro (at the top of the file) is commented out. Since the
string is not referenced, NASM eliminates it, resulting in
the same byte array content in "VbeShim.h".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-58-philmd@redhat.com>
When OVMF runs in a SEV guest, the initial SMM Save State Map is
(1) allocated as EfiBootServicesData type memory in OvmfPkg/PlatformPei,
function AmdSevInitialize(), for preventing unintended information
sharing with the hypervisor;
(2) decrypted in AmdSevDxe;
(3) re-encrypted in OvmfPkg/Library/SmmCpuFeaturesLib, function
SmmCpuFeaturesSmmRelocationComplete(), which is called by
PiSmmCpuDxeSmm right after initial SMBASE relocation;
(4) released to DXE at the same location.
The SMRAM at the default SMBASE is a superset of the initial Save State
Map. The reserved memory allocation in InitializeRamRegions(), from the
previous patch, must override the allocating and freeing in (1) and (4),
respectively. (Note: the decrypting and re-encrypting in (2) and (3) are
unaffected.)
In AmdSevInitialize(), only assert the containment of the initial Save
State Map, in the larger area already allocated by InitializeRamRegions().
In SmmCpuFeaturesSmmRelocationComplete(), preserve the allocation of the
initial Save State Map into OS runtime, as part of the allocation done by
InitializeRamRegions(). Only assert containment.
These changes only affect the normal boot path (the UEFI memory map is
untouched during S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-9-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
Move XenRealTimeClockLib from ArmVirtPkg to OvmfPkg so it can be used
from the OvmfPkg by the following patch, "OvmfPkg/OvmfXen: use
RealTimeClockRuntimeDxe from EmbeddedPkg"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-35-anthony.perard@citrix.com>
On a Xen PVH guest, none of the existing serial or console interface
works, so we add a new one, based on XenConsoleSerialPortLib, and
implemented via SerialDxe.
That is a simple console implementation that can work on both PVH
guest and HVM guests, even if it is rarely going to be used on HVM.
Have PlatformBootManagerLib look for the new console, when running as a
Xen guest.
Since we use VENDOR_UART_DEVICE_PATH, fix its description and coding
style.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-32-anthony.perard@citrix.com>
When running in a Xen PVH guest, there's nothing to do in
PciAcpiInitialization() because there isn't any PCI bus. When the Host
Bridge DID isn't recognised, simply continue. (The value of
PcdOvmfHostBridgePciDevId would be 0 because it isn't set.)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-29-anthony.perard@citrix.com>
Replace the XenDetected() implementation by the one from
XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-28-anthony.perard@citrix.com>
We are going to replace XenDetected() implementation in
PlatformBootManagerLib by the one in XenPlatformLib.
PlatformBootManagerLib's implementation does cache the result of
GetFirstGuidHob(), so we do something similar in XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-27-anthony.perard@citrix.com>
Allow to use Xen hypercalls earlier, during the PEIM stage, but
XenHypercallLibInit() must be called once the XenInfo HOB is created
with the HyperPage setup.
Change the return value of XenHypercallLibInit so failure can be
detected when the call shouldn't fail, but still have the constructor
always succeed.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-17-anthony.perard@citrix.com>
The purpose of XenPlatformLib is to regroup the few functions that are
used in several places to detect if Xen is detected, and to get the
XenInfo HOB.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-14-anthony.perard@citrix.com>
Add missing dependency on PciLib
and remove extra includes of OvmfPlatforms.h.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-2-anthony.perard@citrix.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1843
Currently, the file GUID reference of the UEFI Shell app is indirected
via the PCD gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile,
which is set to a fixed value for OvmfPkg.
So instead, use the symbolic GUID in ShellPkg for this purpose, and drop
the reference to this PCD, and to the IntelFrameworkModulePkg package
entirely.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On Xen, hvmloader firmware leaves address decoding enabled for
enumerated PCI device before jumping into OVMF. OVMF seems to
expect it to be disabled and tries to size PCI BARs in several places
without disabling it which causes BAR64, for example, being
incorrectly placed by QEMU.
Fix it by disabling PCI address decoding explicitly before the
first attempt to size BARs on Xen.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In case BAR64 is placed below 4G choose the correct aperture.
This fixes a failed assertion down the code path.
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
This aperture doesn't exist in QEMU-XEN and hvmloader places BARs
in arbitrary order disregarding prefetchable bit. This makes
prefetchable and non-prefetchable BARs to follow each other that's
quite likely with PCI passthrough devices. In that case, the existing
code, that tries to work out aperture boundaries by reading hvmloader
BAR placement, will report a bogus prefetchable aperture which overlaps
with the regular one. It will eventually trigger an assertion in
DXE PCI initialization code.
Do the same thing as OVMF on QEMU-KVM and pass a non-existing aperture
there. It's not necessary to pass additional allocation flags as we set
ResourceAssigned flag on the root bridge which means they will be ignored.
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.
In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().
This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The DXE Core is one of those modules that call
ProcessLibraryConstructorList() manually.
Before DxeMain() [MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c] calls
ProcessLibraryConstructorList(), and through it, our
PlatformDebugLibIoPortConstructor() function, DxeMain() invokes the
DEBUG() macro multiple times. That macro lands in our
PlatformDebugLibIoPortFound() function -- which currently relies on the
"mDebugIoPortFound" global variable that has (not yet) been set by the
constructor. As a result, early debug messages from the DXE Core are lost.
Move the device detection into PlatformDebugLibIoPortFound(), also caching
the fact (not just the result) of the device detection.
(We could introduce a separate DebugLib instance just for the DXE Core,
but the above approach works for all modules that currently consume the
PlatformDebugLibIoPort instance (which means "everything but SEC").)
This restores messages such as:
> CoreInitializeMemoryServices:
> BaseAddress - 0x7AF21000 Length - 0x3CDE000 MinimalMemorySizeNeeded - 0x10F4000
Keep the empty constructor function -- OVMF's DebugLib instances have
always had constructors; we had better not upset constructor dependency
ordering by making our instance(s) constructor-less.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: c09d957130
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: sanitize blank lines around "mDebugIoPortChecked"]
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a library class, and a UEFI_DRIVER lib instance, that are layered on
top of PciCapLib, and allow clients to plug an EFI_PCI_IO_PROTOCOL backend
into PciCapLib, for config space access.
(Side note:
Although the UEFI spec says that EFI_PCI_IO_PROTOCOL_CONFIG() returns
EFI_UNSUPPORTED if "[t]he address range specified by Offset, Width, and
Count is not valid for the PCI configuration header of the PCI
controller", this patch doesn't directly document the EFI_UNSUPPORTED
error code, for ProtoDevTransferConfig() and its callers
ProtoDevReadConfig() and ProtoDevWriteConfig(). Instead, the patch refers
to "unspecified error codes". The reason is that in edk2, the
PciIoConfigRead() and PciIoConfigWrite() functions [1] can also return
EFI_INVALID_PARAMETER for the above situation.
Namely, PciIoConfigRead() and PciIoConfigWrite() first call
PciIoVerifyConfigAccess(), which indeed produces the standard
EFI_UNSUPPORTED error code, if the device's config space is exceeded.
However, if PciIoVerifyConfigAccess() passes, and we reach
RootBridgeIoPciRead() and RootBridgeIoPciWrite() [2], then
RootBridgeIoCheckParameter() can still fail, e.g. if the root bridge
doesn't support extended config space (see commit 014b472053).
For all kinds of Limit violations in IO, MMIO, and config space,
RootBridgeIoCheckParameter() returns EFI_INVALID_PARAMETER, not
EFI_UNSUPPORTED. That error code is then propagated up to, and out of,
PciIoConfigRead() and PciIoConfigWrite().
[1] MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c
[2] MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, that are layered on top of
PciCapLib, and allow clients to plug a PciSegmentLib backend into
PciCapLib, for config space access.
(Side note:
The "MaxDomain" parameter is provided because, in practice, platforms
exist where a PCI Express device may show up on a root bridge such that
the root bridge doesn't support access to extended config space. Earlier
the same issue was handled for MdeModulePkg/PciHostBridgeDxe in commit
014b472053. However, that solution does not apply to the PciSegmentLib
class, because:
(1) The config space accessor functions of the PciSegmentLib class, such
as PciSegmentReadBuffer(), have no way of informing the caller whether
access to extended config space actually succeeds.
(For example, in the UefiPciSegmentLibPciRootBridgeIo instace, which
could in theory benefit from commit 014b472053, the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() status code is explicitly
ignored, because there's no way for the lib instance to propagate it
to the PciSegmentLib caller. If the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() call fails, then
DxePciSegmentLibPciRootBridgeIoReadWorker() returns Data with
indeterminate value.)
(2) There is no *general* way for any firmware platform to provide, or
use, a PciSegmentLib instance in which access to extended config space
always succeeds.
In brief, on a platform where config space may be limited to 256 bytes,
access to extended config space through PciSegmentLib may invoke undefined
behavior; therefore PciCapPciSegmentLib must give platforms a way to
prevent such access.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, to work more easily with PCI
capabilities in PCI config space. Functions are provided to parse
capabilities lists, and to locate, describe, read and write capabilities.
PCI config space access is abstracted away.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Call Tcg2PhysicalPresenceLibProcessRequest() to process pending PPI
requests from PlatformBootManagerAfterConsole().
Laszlo understanding of edk2 is that the PPI operation processing was
meant to occur *entirely* before End-Of-Dxe, so that 3rd party UEFI
drivers couldn't interfere with PPI opcode processing *at all*.
He suggested that we should *not* call
Tcg2PhysicalPresenceLibProcessRequest() from BeforeConsole(). Because,
an "auth" console, i.e. one that does not depend on a 3rd party
driver, is *in general* impossible to guarantee. Instead we could opt
to trust 3rd party drivers, and use the "normal" console(s) in
AfterConsole(), in order to let the user confirm the PPI requests. It
will depend on the user to enable Secure Boot, so that the
trustworthiness of those 3rd party drivers is ensured. If an attacker
roots the guest OS from within, queues some TPM2 PPI requests, and
also modifies drivers on the EFI system partition and/or in GPU option
ROMs (?), then those drivers will not load after guest reboot, and
thus the dependent console(s) won't be used for confirming the PPI
requests.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cloned "SecurityPkg/Library/DxeTcg2PhysicalPresenceLib" and:
- removed all the functions that are unreachable from
Tcg2PhysicalPresenceLibProcessRequest() [called from platform BDS],
or SubmitRequestToPreOSFunction() and
ReturnOperationResponseToOsFunction() [called from Tcg2Dxe].
- replaced everything that's related to the
TCG2_PHYSICAL_PRESENCE*_VARIABLE variables, with direct access to
the QEMU structures.
This commit is based on initial experimental work from Stefan Berger.
In particular, he wrote most of QEMU PPI support, and designed the
qemu/firmware interaction. Initially, Stefan tried to reuse the
existing SecurityPkg code, but we eventually decided to get rid of the
variables and simplify the ovmf/qemu version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: clean up non-idiomatic coding style]
[lersek@redhat.com: null mPpi on invalid PPI address]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This NULL library will let us call
Tcg2PhysicalPresenceLibProcessRequest() unconditionally from
BdsPlatform when building without TPM2_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: replace MdeModulePkg.dec w/ MdePkg.dec]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Virtio RNG devices are never boot devices, so in commit 245c643cc8 we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit 245c643cc8 removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If both ConIn and ConOut exist, but ConIn references none of the PS/2
keyboard, the USB wild-card keyboard, and any serial ports, then
PlatformInitializeConsole() currently allows the boot to proceed without
any input devices at all. This makes for a bad user experience -- the
firmware menu could only be entered through OsIndications, set by a guest
OS.
Do what ArmVirtQemu does already, namely connect the consoles, and add
them to ConIn / ConOut / ErrOut, unconditionally. (The underlying
EfiBootManagerUpdateConsoleVariable() function checks for duplicates.)
The issue used to be masked by the EfiBootManagerConnectAll() call that
got conditionalized in commit 245c643cc8.
This patch is best viewed with "git show -b -W".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1577546
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Read the list of trusted cipher suites from fw_cfg and to store it to
EDKII_HTTP_TLS_CIPHER_LIST_VARIABLE.
The fw_cfg file will be formatted by the "update-crypto-policies" utility
on the host side, so that the host settings take effect in guest HTTPS
boot as well. QEMU forwards the file intact to the firmware. The contents
are forwarded by NetworkPkg/HttpDxe (in TlsConfigCipherList()) to
NetworkPkg/TlsDxe (TlsSetSessionData()) and TlsLib (TlsSetCipherList()).
Note: the development of the "update-crypto-policies" feature is underway
at this time. Meanwhile the following script can be used to generate the
binary file for fw_cfg:
export LC_ALL=C
openssl ciphers -V \
| sed -r -n \
-e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
| xargs -r -- printf -- '%b' > ciphers.bin
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
[lersek@redhat.com: update commit msg and add script as requested by Gary]
[lersek@redhat.com: update commit msg as requested by Jiaxin]
Introduce TlsAuthConfigLib to read the list of trusted CA certificates
from fw_cfg and to store it to EFI_TLS_CA_CERTIFICATE_VARIABLE.
The fw_cfg file is formatted by the "p11-kit" and "update-ca-trust"
utilities on the host side, so that the host settings take effect in guest
HTTPS boot as well. QEMU forwards the file intact to the firmware. The
contents are sanity-checked by NetworkPkg/HttpDxe code that was added in
commit 0fd13678a6.
Link TlsAuthConfigLib via NULL resolution into TlsAuthConfigDxe. This sets
EFI_TLS_CA_CERTIFICATE_VARIABLE in time for both
NetworkPkg/TlsAuthConfigDxe (for possible HII interaction with the user)
and for NetworkPkg/HttpDxe (for the effective TLS configuration).
The file formatted by "p11-kit" can be large. On a RHEL-7 host, the the
Mozilla CA root certificate bundle -- installed with the "ca-certificates"
package -- is processed into a 182KB file. Thus, create
EFI_TLS_CA_CERTIFICATE_VARIABLE as a volatile & boot-time only variable.
Also, in TLS_ENABLE builds, set the cumulative limit for volatile
variables (PcdVariableStoreSize) to 512KB, and the individual limit for
the same (PcdMaxVolatileVariableSize) to 256KB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This improves the UEFI boot time for VMs that have "-kernel", many disks
or NICs, and no "bootindex" properties.
(Unlike in ArmVirt commit 23d04b58e2, in OvmfPkg commit 52fba28994 we
introduced TryRunningQemuKernel() right from the start *after*
BdsLibConnectAll(). Therefore, unlike in patch
'ArmVirtPkg/PlatformBootManagerLib: return to "-kernel before boot
devices"', we adopt the logic as new in this patch.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
PlatformBootManagerAfterConsole()
<--------------------------------+
PlatformBdsConnectSequence() |
ConnectDevicesFromQemu() / EfiBootManagerConnectAll() |
PciAcpiInitialization() ---------------------------------+
TryRunningQemuKernel()
Functionally this is a no-op:
- PciAcpiInitialization() iterates over PciIo protocol instances, which
are available just the same at the new call site.
- The PCI interrupt line register exists only to inform system software
(it doesn't affect hardware) and UEFI drivers don't use PCI interrupts
anyway.
(More background in commits 2e70cf8ade and 5218c27950c4.)
This change will let us move TryRunningQemuKernel() between
PciAcpiInitialization() and PlatformBdsConnectSequence() in the next
patch.
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
The old-style "Routine Description: ..." comments use the leftmost column
and are placed between the parameter list and the function body. Therefore
they cause git-diff to produce bogus hunk headers that fail to name the
function being patched.
Convert these comment blocks to the current edk2 style. While at it, clean
them up too.
For PlatformBootManagerBeforeConsole() and
PlatformBootManagerAfterConsole(), copy the descriptions from the call
sites in "MdeModulePkg/Universal/BdsDxe/BdsEntry.c". They are more
detailed than the comments in the lib class header
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h"; ArmVirtPkg
already uses these comments.
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
is helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional
change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QemuBootOrderLib expects PlatformBootManagerLib to call the following
triplet:
(1) EfiBootManagerConnectAll(),
(2) EfiBootManagerRefreshAllBootOption(),
(3) SetBootOrderFromQemu().
This leads to bad performance, when many devices exist such that the
firmware can drive them, but they aren't marked for booting in the
"bootorder" fw_cfg file. Namely,
(1) EfiBootManagerConnectAll() talks to all hardware, which takes long.
Plus some DriverBindingStart() functions write NV variables, which is
also slow. (For example, the IP config policy for each NIC is stored
in an NV var that is named after the MAC).
(2) EfiBootManagerRefreshAllBootOption() generates boot options from the
protocol instances produced by (1). Writing boot options is slow.
(3) Under the above circumstances, SetBootOrderFromQemu() removes most of
the boot options produced by (2). Erasing boot options is slow.
Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect
devices that the QEMU user actually wants to boot off of.
(There's a slight loss of compatibility when a platform switches from
EfiBootManagerConnectAll() to ConnectDevicesFromQemu().
EfiBootManagerConnectAll() may produce UEFI device paths that are unknown
to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based
devices). The BootOrderComplete() function lets such unmatched boot
options survive at the end of the boot order. With
ConnectDevicesFromQemu(), these options will not be auto-generated in the
first place. They may still be produced by other means.
SetBootOrderFromQemu() is not modified in any way; reordering+filtering
boot options remains a separate task.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
The "/MAC(" suffix of the translated UEFI devpath prefix is unnecessary
for matching, because the virtio-mmio base address in VenHwString is
unique anyway. Furthermore, the partial string "MAC(" cannot be processed
by ConvertTextToDevicePath(), which will become relevant later in this
series. Remove "/MAC(".
While at it, remove a bogus comment on PCI.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
Among other things, the header file declares the functions that implement
the VIRTIO_DEVICE_PROTOCOL members over virtio-mmio. The functions are
defined in "VirtioMmioDeviceFunctions.c", and referenced in the
initialization of "mMmioDeviceProtocolTemplate", in "VirtioMmioDevice.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the CreateExtraRootBusMap(),
DestroyExtraRootBusMap(), and MapRootBusPosToBusNr() functions. They are
defined in "ExtraRootBusMap.c", and called from "QemuBootOrderLib.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, "DebugLibDetect.h" declares the
PlatformDebugLibIoPortFound() function. The function is called from
"DebugLib.c", which is included in both library instances. The function is
defined separately per library instance, in "DebugLibDetectRom.c" and
"DebugLibDetect.c", respectively.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares LoadNvVarsFromFs() and SaveNvVarsToFs(), which
are defined in "FsAccess.c" and called from "NvVarsFileLib.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the AllocateAcpiNvsPool()
function. This function is called from the "LockBoxLib.c" source file (in
the implementation of the SaveLockBox() library API), which is built into
both library instances. AllocateAcpiNvsPool() is implemented separately
per library instance, in "LockBoxBase.c" and "LockBoxDxe.c", respectively.
(In the LockBoxBaseLib instance, the AllocateAcpiNvsPool() function is
never expected to be called -- the public SaveLockBox() API should never
be called before the DXE phase --, we just have to provide a stub for
linking purposes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InitLinuxDescriptorTables() and
SetLinuxDescriptorTables() functions, which are called from "Linux.c" and
implemented in "LinuxGdt.c".
The header file also declares the JumpToKernel() and JumpToUefiKernel()
functions, which are similarly called from "Linux.c". They are implemented
(dependent on architecture) in "Ia32/JumpToKernel.nasm" and
"X64/JumpToKernel.nasm".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the
InternalMemEncryptSevSetMemoryDecrypted() and
InternalMemEncryptSevSetMemoryEncrypted() functions. The functions are
called from "X64/MemEncryptSevLib.c", and defined in
"X64/VirtualMemory.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InternalAcpiGetTimerTick() function. The
function is called from "AcpiTimerLib.c", which is built into all three
library instances. The function is defined individually per library
instance, in "BaseRomAcpiTimerLib.c", "BaseAcpiTimerLib.c", and
"DxeAcpiTimerLib.c" (enumerated in increasing firmware phase order).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Once PiSmmCpuDxeSmm relocates SMBASE for all VCPUs, the pages of the
initial SMRAM save state map can be re-encrypted (including zeroing them
out after setting the C-bit on them), and they can be released to DXE for
general use (undoing the allocation that we did in PlatformPei's
AmdSevInitialize() function).
The decryption of the same pages (which will occur chronologically
earlier) is implemented in the next patch; hence the "re-encryption" part
of this patch is currently a no-op. The series is structured like this in
order to be bisection-friendly. If the decryption patch preceded this
patch, then an info leak would be created while standing between the
patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next three patches, we're going to modify three modules under
OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest,
each affected module will have to know the page range that covers the
initial (pre-SMBASE relocation) SMRAM save state map. Add a helper
function to MemEncryptSevLib that calculates the "base address" and
"number of pages" constants for this page range.
(In a RELEASE build -- i.e., with assertions disabled and optimization
enabled --, the helper function can be compiled to store two constants
determined at compile time.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In edk2, the "static" keyword is spelled "STATIC". Also let "STATIC" stand
alone on a line in function definitions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are many overlong lines; it's hard to work with the library like
this. Rewrap all files to 79 columns.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Commit 2ac1730bf2 (MdeModulePkg/DxeIpl: Mark page table as read-only)
sets the memory pages used for page table as read-only after paging is
setup and sets CR0.WP to protect CPU modifying the read-only pages.
The commit causes #PF when MemEncryptSevClearPageEncMask() or
MemEncryptSevSetPageEncMask() tries to change the page-table attributes.
This patch takes the similar approach as Commit 147fd35c3e
(UefiCpuPkg/CpuDxe: Enable protection for newly added page table).
When page table protection is enabled, we disable it temporarily before
changing the page table attributes.
This patch makes use of the same approach as Commit 2ac1730bf2
(MdeModulePkg/DxeIpl: Mark page table as read-only)) for allocating
page table memory from reserved memory pool, which helps to reduce a
potential "split" operation.
The patch duplicates code from commit 147fd35c3e. The code duplication
will be removed after we implement page table manipulation library. See
bugzilla https://bugzilla.tianocore.org/show_bug.cgi?id=847.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This means that SetBootOrderFromQemu() will preserve all UEFI boot options
matched by any given OFW devpath, such as PXEv4, HTTPv4, PXEv6 and HTTPv6
boot options for the same NIC. Currently we stop the matching / appending
for the OFW devpath coming from the outer loop whenever we find the first
UEFI boot option match in the inner loop.
(The previous patch was about multiple OFW devpaths matching a single UEFI
boot option (which should never happen). This patch is about a single OFW
devpath matching multiple UEFI boot options. With the "break" statement
removed here, the small optimization from the last patch becomes a bit
more relevant, because now the inner loop always counts up to
ActiveCount.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SetBootOrderFromQemu() function implements a nested loop where
- the outer loop iterates over all OpenFirmware (OFW) device paths in the
QEMU boot order, and translates each to a UEFI device path prefix;
- the inner loop matches the current (translated) prefix against all
active UEFI boot options in turn;
- if the UEFI boot option is matched by the translated prefix, the UEFI
boot option is appended to the "new" UEFI boot order, and marked as
"has been appended".
This patch adds a micro-optimization where already matched / appended UEFI
boot options are skipped in the inner loop. This is not a functional
change. A functional change would be if, as a consequence of the patch,
some UEFI boot options would no longer be *doubly* matched.
For a UEFI boot option to be matched by two translated prefixes, one of
those prefixes would have to be a (proper, or equal) prefix of the other
prefix. The PCI and MMIO OFW translation routines output such only in the
following cases:
- When the original OFW device paths are prefixes of each other. This is
not possible from the QEMU side. (Only leaf devices are bootable.)
- When the translation rules in the routines are incomplete, and don't
look at the OFW device paths for sufficient length (i.e., at nodes where
they would already differ, and the difference would show up in the
translation output).
This would be a shortcoming of the translation routines and should be
fixed in TranslatePciOfwNodes() and TranslateMmioOfwNodes(), whenever
identified.
Even in the second case, this patch would replace the double appending of
a single UEFI boot option (matched by two different OFW device paths) with
a correct, or cross-, matching of two different UEFI boot options. Again,
this is not expected, but arguably it would be more correct than duplicate
boot option appending, should it occur due to any (unexpected, unknown)
lack of detail in the translation routines.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When SEV is enabled, every debug message printed by OVMF to the
QEMU debug port traps from the guest to QEMU character by character
because "REP OUTSB" cannot be used by IoWriteFifo8. Furthermore,
when OVMF is built with the DEBUG_VERBOSE bit (value 0x00400000)
enabled in "gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel", then the
OvmfPkg/IoMmuDxe driver, and the OvmfPkg/Library/BaseMemEncryptSevLib
library instance that is built into it, produce a huge amount of
log messages. Therefore, in SEV guests, the boot time impact is huge
(about 45 seconds _additional_ time spent writing to the debug port).
While these messages are very useful for analyzing guest behavior,
most of the time the user won't be capturing the OVMF debug log.
In fact libvirt does not provide a method for configuring log capture;
users that wish to do this (or are instructed to do this) have to resort
to <qemu:arg>.
The debug console device provides a handy detection mechanism; when read,
it returns 0xE9 (which is very much unlike the 0xFF that is returned by
an unused port). Use it to skip the possibly expensive OUT instructions
when the debug I/O port isn't plugged anywhere.
For SEC, the debug port has to be read before each full message.
However:
- if the debug port is available, then reading one byte before writing
a full message isn't tragic, especially because SEC doesn't print many
messages
- if the debug port is not available, then reading one byte instead of
writing a full message is still a win.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The next patch will want to add a global variable to
PlatformDebugLibIoPort, but this is not suitable for the SEC
phase, because SEC runs from read-only flash. The solution is
to have two library instances, one for SEC and another
for all other firmware phases. This patch adds the "plumbing"
for the SEC library instance, separating the INF files and
moving the constructor to a separate C source file.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove Uefi.h, which includes UefiSpec.h, and change the
return value to match the RETURN_STATUS type.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
XenHypercallLib uses the 'hvc' instruction, which is not implemented
on all ARMv7 CPUs, and so we need to explicitly specify a CPU that
has the virtualization extensions.
This override used to be set at the platform level, but this was removed
in commit 0d36a219c7
('ArmPlatformPkg/PL031RealTimeClockLib: drop ArmPlatformSysConfigLib
reference), under the assumption that all users of the 'hvc' instruction
had already been fixed.
So fix this for GNU binutils by adding the 'virt' arch extension
directive, and for RVCT by setting the --cpu command line option to a
CPU that is virt capable.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The feature is primarily useful for modern AARCH64 guests that have no
built-in virtio block / SCSI drivers; as on "qemu-system-aarch64 -M virt",
there are no IDE or AHCI controllers that could be used as fallback. XHCI
is available in "-M virt" however, and because XHCI predates AARCH64 by
several years, said guests are expected to have built-in drivers for it.
Other device models ("usb-uas", "usb-bot") are out of scope for now,
similarly to USB1.x (UHCI) and USB2 (EHCI) host controllers, and similarly
to USB hubs (which are USB1.1 only). In particular, port mapping between
EHCI and companion UHCI controllers is very complex; it even leads to PCI
slot/function differences between the OpenFirmware device paths exported
by QEMU and the the UEFI device paths generated by edk2.
The number of ports on the XHCI controller defaults to 4, but it can be
raised via the "p3" property to 15. In addition, several XHCI controllers
can be grouped into a single-slot, multi-function PCI device. These allow
for a good number of usb-storage devices, while their desired boot order
remains recognizable to this patch.
In the example below, we create two XHCI controllers, grouped into PCI
slot 00:02 as functions 0 and 1. Both controllers are given 15 ports. We
attach a "usb-storage" device to controller 1 at port 3 (ports are 1-based
in QEMU, 0-based in edk2), and attach another "usb-storage" device to
controller 2 at port 9.
QEMU command line options (NB. they apply equally to aarch64/virt and
x86_64/{i440fx,q35}):
-device qemu-xhci,id=xhci1,p3=15,addr=02.0,multifunction=on \
-device qemu-xhci,id=xhci2,p3=15,addr=02.1 \
\
-drive id=disk1,if=none,format=qcow2,$DISK1_OPTIONS \
-drive id=disk2,if=none,format=qcow2,$DISK2_OPTIONS \
\
-device usb-storage,drive=disk1,bus=xhci1.0,port=3,bootindex=1 \
-device usb-storage,drive=disk2,bus=xhci2.0,port=9,bootindex=2 \
Libvirt domain XML fragment:
<controller type='usb' index='1' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x0'
multifunction='on'/>
</controller>
<controller type='usb' index='2' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
</controller>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sda' bus='usb'/>
<boot order='1'/>
<address type='usb' bus='1' port='3'/>
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sdb' bus='usb'/>
<boot order='2'/>
<address type='usb' bus='2' port='9'/>
</disk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
"Boot Mode:%x" is an informative message, not an error report. Set its
debug mask to DEBUG_INFO.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Since commit 19c6d9feaa ("MdePkg: Expand BaseIoLibIntrinsic (IoLib
class) library", 2017-01-14), IoWriteFifo8() has been widely available to
modules. Use it to print debug messages and assertion failures to the QEMU
debug port, rather than open-coded loops.
In the general case this speeds up logging, because debug messages will
now trap to QEMU once per message (as opposed to once per character), due
to "REP OUTSB" in "MdePkg/Library/BaseIoLibIntrinsic/*/IoFifoSev.nasm".
In SEV guests, there is no speedup (SEV doesn't support the REP prefix).
SEV is detected internally to BaseIoLibIntrinsic.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Debug messages that start as natural (English) language phrases (after the
debug prefix) should uniformly begin with lower-case or upper-case. In
SetMemoryEncDec() we have a mixture now. Stick with lower-case.
(Upper-case is better for full sentences that also end with punctuation.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In SetMemoryEncDec(), we have four locations where we (a) log a message on
the DEBUG_WARN level that says "ERROR", (b) return the status code
RETURN_NO_MAPPING right after.
These messages clearly describe actual errors (bad PML4, PDPE, PDE, PTE).
Promote their debug levels to DEBUG_ERROR, and remove the word "ERROR"
from the messages.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In the SetMemoryEncDec() function, the way we currently report
PhysicalAddress is not uniform:
- mostly we say "for %lx",
- in one spot we say "at %lx" (even though the 2MB page being split does
not live *at* PhysicalAddress, instead it maps PhysicalAddress),
- in another spot we don't log PhysicalAddress at all (when splitting a
1GB page).
Unify this, using the format string "for Physical=0x%Lx".
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
None of the DEBUG macro invocations in SetMemoryEncDec() fit on a single
line. Break them to multiple lines, for (a) conforming to the coding style
spec, (b) easier modification in later patches.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
There's a small window between
- AllocFwCfgDmaAccessBuffer() mapping the new FW_CFG_DMA_ACCESS object for
common buffer operation (i.e., decrypting it), and
- InternalQemuFwCfgDmaBytes() setting the fields of the object.
In this window, earlier garbage in the object is "leaked" to the
hypervisor. So zero the object before we decrypt it.
(This commit message references AMD SEV directly, because QemuFwCfgDxeLib
is not *generally* enabled for IOMMU operation just yet, unlike our goal
for the virtio infrastructure. Instead, QemuFwCfgDxeLib uses
MemEncryptSevLib explicitly to detect SEV, and then relies on IOMMU
protocol behavior that is specific to SEV. At this point, this is by
design.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The patch change the "BufferPhysAddr" parameter of VirtioAppendDesc()
from type UINTN to UINT64.
UINTN is appropriate as long as we pass system memory references. After
the introduction of bus master device addresses, that's no longer the case
in general. Should we implement "real" IOMMU support at some point, UINTN
could break in 32-bit builds of OVMF.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: clarify commit message]
[lersek@redhat.com: balance parens in VirtioAppendDesc() comment blocks]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The VRING buffer is a communication area between guest and hypervisor.
Allocate it using VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages() so that
it can be mapped later with VirtioRingMap() for bi-directional access.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: correct typo in VirtioRingInit() comment blocks]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add a function to map the ring buffer with BusMasterCommonBuffer so that
ring can be accessed by both guest and hypervisor.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix typo in commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
For the case when an IOMMU is used for translating system physical
addresses to DMA bus master addresses, the transport-independent
virtio device drivers will be required to map their VRING areas to
bus addresses with VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer() calls.
- MMIO and legacy virtio transport do not support IOMMU to translate the
addresses hence RingBaseShift will always be set to zero.
- modern virtio transport supports IOMMU to translate the address, in
next patch we will update the Virtio10Dxe to use RingBaseShift offset.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: remove commit msg paragraph with VirtioLib reference]
[lersek@redhat.com: fix typo in VIRTIO_SET_QUEUE_ADDRESS comment block]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Gerd Hoffmann
Dov Murik
James Bottomley
Laszlo Ersek
Brijesh Singh
Lendacky, Thomas
Anthony PERARD
Martin Radev
Ankur Arora
Jiahui Cen via groups.io
Borghorst, Hendrik via groups.io
Rebecca Cran
Leif Lindholm
Ard Biesheuvel
Liming Gao
Antoine Coeur
Pete Batard
Leif Lindholm
Hao A Wu
Igor Druzhinin
Shenglei Zhang
Zhichao Gao
Michael D Kinney
Bret Barkelew
Ruiyu Ni
chenc2
Marc-André Lureau
Dandan Bi
Heyi Guo
Paolo Bonzini