The NorFlashDxe driver in ArmPlatformPkg was shared between development
platforms built by ARM Ltd, and virtual platforms that were once modeled
after Versatile Express, but have very little in common with actual bare
metal implementations.
Both sides have migrated to a domain specific version of the driver, so
we can retire the old one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Copy code from PrePi to PrePeiCore that prints the firmware version
and build date early in the boot process.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Some platforms may set up a preliminary ID map in flash and enter EFI
with the MMU and caches enabled, as this removes a lot of the complexity
around cache coherency. Let's take this into account, and avoid touching
the MMU controls or perform cache invalidation when the MMU is enabled
at entry.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
These debug messages are repeated in both NorFlashBlockIoReadBlocks()
and NorFlashBlockIoWriteBlocks():
"NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x"
"bytes (%d kB), BufferPtr @ 0x%08x)\n"
Although this requires 5 arguments, only 4 are provided. The kilobyte
value was never given.
This change removes that specifier so the 4 arguments match the 4
specifiers in the debug macro.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
On platforms that do not have the serial console port pre-initialized
prior to the SEC phase and due to the absence of a call to
"SerialPortInitialize", this results in missing debug logs. So, call
the auto-generated "ProcessLibraryConstructorList" function from SEC
phase to have all the dependent library constructors called
(this includes a call to "SerialPortInitialize").
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
For Arm platforms that support more that one serial port, one of the
serial port can be used for connecting debuggers such as WinDbg. There
are PCDs that allow the base address and clock rate to be specified for
this debug serial port but not its interrupt number. So add a PCD to
specify the interrupt number assigned to the serial debug port
controller.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The DEBUG output in LcdGraphicsBlt is overly verbose, and makes using
the console difficult, for example when using the UiApp.
Since the extra output should no longer be needed, delete the DEBUG
lines.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
With GNU Make 4.2.1, ifeq ($(EDK2_DSC),"") doesn't catch the case where
EDK2_DSC isn't defined. So, switch to using ifndef.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The debugger in Arm Development Studio 2021.2 doesn't work with
"ec = debugger.getExecutionContext(0)" because it's subsequently unable
to access memory. Fix it by switching to
"ec = debugger.getCurrentExecutionContext()".
The documentation for waitForStop() says:
"It is not needed after a call to stop() because stop() is blocking."
So, remove the call to waitForStop.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
An error message in Scripts/Ds5/edk2_debugger.py was missing the word
'not'.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Remove the ClusterId and CoreId fields in the ARM_CORE_INFO structure in
favor of a new Mpidr field. Update code in
ArmPlatformPkg/PrePeiCore/MainMPCore and ArmPlatformPkg/PrePi/MainMPCore.c
to use the new field and call new macros GET_MPIDR_AFF0 and GET_MPIDR_AFF1
instead.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmPlatformPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3749
Update package YAML files to ignore ECC errors that are
already present. These issues must be fixed in the future,
but should not block source code changes for these known
issues.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This commits add file which can be included by platform Flash
Description File. It allows to specify certificate files, which
will be embedded into binary file. The content of these files
can be used to initialize Secure Boot default keys and databases.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
cmd_load_symbols.py can only load symbols from FV. Add the possibility to
use UEFI console output to calculate dll load address and send
add-symbol-file commands directly to ArmDS debugger
dll load address can't be used directly from UEFI output, see comment in
DebugPeCoffExtraActionLib: "This may not work correctly if you generate
PE/COFF directly as then the Offset would not be required".
1) Use objdump -S module.dll | grep <_ModuleEntryPoint> to get offset
in dll (offset)
2) Use Entrypoint=<address> from UEFI console output (entrypoint)
3) dll load address is (entrypoint)-(offset)
Signed-off-by: Artem Kopotev <artem.kopotev@arm.com>
Tested-by: Pierre Gondois <Pierre.Gondois@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3445
Spellcheck was not covering all specified files due to CSpell v5 and
Node v10 incompatibility of current CI pipeline configuration.
This change switches the spellcheck for ArmPlatformPkg to AuditOnly to
avoid potentially numerous spell errors. The correction action is to be
revisited by package maintainers once the tool incompatibility is
resolved.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add ArmPlatformPkg.ci.yaml to configure the CI for the
ArmPlatformPkg.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used
for #define declarations
Edk2 coding standard stating that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used."
the include guard of ArmCortexA5x.h is also updated.
Ref:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
5_source_files/53_include_files#
5-3-5-all-include-file-contents-must-be-protected-by-a-include-guard
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DependencyCheck available in .pytool detects an unnecessary
dependency of the NorFlashStandaloneMm.inf module over the
EmbeddedPkg package.
This patch removes this dependency.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch fixes the following Ecc reported error:
INF/DEC/DSC/FDF file header comment should begin
with "## @file" or "# @file" at the very top file
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
File header doesn't exist File header comment missing
the ""Copyright""
Even though a copyright is present in the header file,
the leading '*' char prevents the Ecc tool from detecting it.
According to the edk2 coding specifcation, section 5.2.3
"File Heading", there should not be leading '*' char.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246
MdeLibs.dsc.inc was added for some basic/default library
instances provided by MdePkg and RegisterFilterLibNull Library
was also added into it as the first version of MdeLibs.dsc.inc.
So update platform dsc to consume MdeLibs.dsc.inc for
RegisterFilterLibNull which will be consumed by IoLib and BaseLib.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Commit 8015f3f6d4 ("ArmPlatformPkg: Enable support for flash in
64-bit address space") updated the NorFlash DXE and StMM drivers to
take alternate PCDs into account when discovering the base of the
NOR flash regions.
This introduced a disparity between the declarations of the PCD references
in the .INF files, which permits the use of dynamic PCDs, and the code
itself, which now uses FixedPcdGet() accessors. On platforms that actually
use dynamic PCDs, this results in a build error.
So let's clean this up:
- for the DXE version, use the generic PcdGet() accessors, so dynamic PCDs
are permitted
- for the standalone MM version, redeclare the PCDs as [FixedPcd] in the
.INF description, and switch to the FixedPcdGet() accessors.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
The existing NOR Flash DXE and StandaloneMm driver supports NOR flash
devices connected in the 32-bit address space. Extend these drivers to
allow NOR flash devices connected to 64-bit address space to be usable
as well. Also, convert the base address and size sanity check from
ASSERT() to if condition so that even if the firmware is build in
release mode, it can return error if the parameter(s) is/are invalid.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Tested-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Implement a version of the NOR Flash driver that can execute
in standalone MM context.
This is used to access the secure variable storage, it only
supports EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
In preparation of creating a standalone MM version of the
NOR Flash driver, refactor the existing pieces into a core
driver. NorFlashDxe.c has the DXE instantiation code,
FVB initialization code and some common functions.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Indeed, according to the EDK II C Coding Standards
Specification, s5.6.2.2 "Enumerated Types" and
s4.3.4 Function and Data Names, elements of an
enumerated type shoud be a mixed upper- and
lower-case text.
A max element is also added, as advised by
s5.6.2.2.3 of the same document.
Reference:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
In preparation for changing EfiTimeToEpoch()'s return type to UINTN, cast
EfiTimeToEpoch()'s retval to UINT32 explicitly, in LibSetTime().
Currently, this is a no-op, and even after widening the retval, it will
make no difference, as LibSetTime() explicitly restricts Time->Year under
2106, given that "the PL031 is a 32-bit counter counting seconds". The
patch is made for preventing compiler warnings.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201221113657.6779-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The edk2 CI runs the "cspell" spell checker tool. Some words
are not recognized by the tool, triggering errors.
This patch modifies some spelling/wording detected by cspell.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used for #define
declarations
The "SerialPrint" macro is definied for the PrePi module
residing in the ArmPlatformPkg. It is never used in the module.
The macro is thus removed.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no unnecessary inclusion of library
classes in the INF file
This comes with the additional information:
"The Library Class [TimeBaseLib] is not used
in any platform"
"The Library Class [PL011UartClockLib] is not used
in any platform"
"The Library Class [PL011UartLib] is not used
in any platform"
Indeed, the PL011SerialPortLib module requires the
PL011UartClockLib and PL011UartLib libraries.
The PL031RealTimeClockLib module requires the TimeBaseLib
library.
ArmPlatformPkg/ArmPlatformPkg.dsc builds the two modules,
but doesn't build the required libraries. This patch adds
the missing libraries to the [LibraryClasses.common] section.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source file
[ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.h]
is existing in module directory but it is not described
in INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source file
[ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.h]
is existing in module directory but it is not described
in INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source file
[ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h]
is existing in module directory but it is not described
in INF file.
Files in [Sources.common] are also alphabetically re-ordered.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Module file has FILE_GUID collision with other
module file
The two .inf files with clashing GUID are:
edk2\ArmPlatformPkg\PrePeiCore\PrePeiCoreMPCore.inf
edk2\ArmPlatformPkg\Library\LcdPlatformNullLib\LcdPlatformNullLib.inf
The PrePeiCoreMPCore module has been imported in 2011 and the
LcdPlatformNullLib module has been created in 2017. The
PrePeiCoreMPCore has the precedence.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Module file has FILE_GUID collision with other
module file
The two .inf files with clashing GUID are:
edk2\ArmPlatformPkg\PrePi\PeiUniCore.inf
edk2\ArmPlatformPkg\PrePi\PeiMPCore.inf
Both files seem to have been imported from the previous
svn repository as the same time.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Boolean values and variable type BOOLEAN should not use
explicit comparisons to TRUE or FALSE
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Some virtual machine managers like kvmtool can relocate
the devices in the system memory map. The information
about the devices location in memory is described in the
device tree. Therefore, the CFI memory region and the
associated Non volatile storage variables need to be
adjusted accordingly.
To support such use cases the non-volatile storage
variable base PCD PcdFlashNvStorageVariableBase has
been defined as a dynamic PCD.
The NOR flash driver was using the Flash non-volatile
storage variable base PCD as a fixed PCD, thereby
preventing runtime resolution of the variable base
address.
Therefore update the NOR flash driver to load the
PCD using PcdGet32 instead of FixedPcdGet32.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PL011UartLib determines its FIFO depth based on the PID2 value but
the register PID2 is not mandatory as per the SBSA spec.
This change won't check PID2 if PcdUartDefaultReceiveFifoDepth is set
to a value > 0.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Ard Biesheuvel
Rebecca Cran
Michael Kubacki
Pierre Gondois
Rohit Mathew
Thomas Abraham
Rebecca Cran
Rebecca Cran
Rebecca Cran
Michael D Kinney
Grzegorz Bernacki
Artem Kopotev
Sean Brogan
Dandan Bi
Ard Biesheuvel
Vijayenthiran Subramaniam
Masahisa Kojima
Laszlo Ersek
Sami Mujawar
Irene Park